There was an oddity in the manual that exposed a problem with the
test for the "special case" of an inset all by itself in a pargraph.
If a font change is applied to that inset, we still need to open the
paragraph.
(cherry picked from commit 3be23d18b6)
The export of compressed files to previous lyx versions failed on windows.
The change in this case is to explicitly pass the output file since we know it.
At the same time take care of the fact that lyx2lyx knows what file format
versions corresponds to each lyx version.
care of much of what we need to do for RTL languages. It does not
take care of inline language changes, probably.
(cherry picked from commit 07dcb1c525)
dealing properly with the paragraph separator tag.
We really need to use that tag as a kind of general marker for which
tags we're responsible for in a given paragraph and which tags we are
not. So the changes to InsetText.cpp use the tag as that kind of marker.
Note that, as of this commit, the User Guide again exports without any
kind of error. I haven't yet checked the other manuals.
This fixes bug #8022.
(cherry picked from commit 31e25c8ec6)
In redoParagraph, this should be done before coping with the insets,
other wise some graphic gliches may occur. This is a better fix for
Fixes bug #10163.
(cherry picked from commit 71374b38c2)
LyX did not distinguish compressed and uncompressed svg files previously.
Therefore XHTML export of vector graphics did use svgz images directly, which
is not supported by browsers. If svg and svgz are treated as two formats then
all works fine. This is also consistent with the loadable image formats
reported by qt: It reports both svg and svgz.
The gunzip dependency in converters is not new (it is already used internally),
but the gzip dependency is new, so it might not be available on windows.
This is not important at the moment, since we do not yet need to convert svg
to svgz, I only added the converter for completeness.
This is the well known file locking problem: The TempFile class keeps the
created file locked for the own process, and this prevents the CAS to read it.
Instead of resetting it to false, do a proper test to see whether
there is a separator at the end of the row.
Fixes bug #10180.
(cherry picked from commit 5e5440f2f3)
Provides two new styles:
1. An "In Premable" style that puts whatever is entered into it into the preamble.
This can be used, if one wishes, to include preamble code in the body of the
LyX document.
2. An "In Title" style that will put its contents into the body of the LaTeX
document, but before \maketitle is issued. This is useful for making branches
and notes in title-related material. (If you put these in a Standard layout,
this signals to LyX to output \maketitle, which may then come too early.)
The ForceLocal machinery allows the module to be added to stable.
(cherry picked from commit a9af5333b2)
output of tags until we know they're needed. In the case of HTML
tables, empty cells should of course be output, so we need to force
the tags to be output.
(cherry picked from commit 35d449c5da)
In some cases, the insets may change height or width without changing
the other apsects of the row.
Fixes bug #6991 and #10182.
(cherry picked from commit 508518ad95)
The computation of the width of the button was wrong. If <--> stands
for TEXT_TO_INSET_OFFSET/2 spacing, and if `[]' marks the button's
limits, then the intent is
<-->[<-->button text<-->]<-->
Therefore the physical grey rectangle width is
width - Inset::TEXT_TO_INSET_OFFSET
With this change, the spacing on the right of the button is not larger
than the left one.
Fixes bug #10147.
(cherry picked from commit 516d5d29dc)
There is already a spacing of 2 pixels on each side of a button (e.g.
collapsed inset). There is no need to add one extra pixel for command
insets.
Fixes part of bug #10149.
(cherry picked from commit 68149e380d)
As such, it shall be protected in moving arguments, such as sections.
Fixes bug #10092.
(cherry picked from commit 86ee2699c30b63e5b4de3ad725519756d17aec2c)
Those two functions used two different hackish and buggy
implementation to know when the function is disabled. Replace that by
asking the containing inset whether it accepts inserting display math
inset.
Fixes bug #10033.
(cherry picked from commit de5630a1562054cb969b106e35f84bfe1e99002a)
The Reproducible Builds effort (https://wiki.debian.org/ReproducibleBuilds) in Debian (at least) means that 'ar' is built in deterministic mode as default: all timestamps are set to 0.
This is not compatible with the use of the 'u' flag, and therefore ARFLAGS has to be changed from 'cru' to 'cr'.
This gets rid of the harmless but annoying warning
ar: `u' modifier ignored since `D' is the default (see `U')
(cherry picked from commit 987fc1d15d017c192a566fc922e3967d9d280668)
When in a tabular cell, "this" is just a lone InsetText, while cur.inset() is the whole tabular. This makes a big difference, especially when one wants to count cells.
Fixes bug #9954.
(cherry picked from commit 4caf167dbd24722421ae8d94a2c103bf41a7667d)
inset-select-all has 3 levels
1. select current cell
2. select all cells
3. select inset from outside.
The second level makes sense for tables (text and math), but not for things like a math fraction.
Introduce a new method Inset::isTable() that allows to detect this case properly and skip level 2.
(cherry picked from commit 5de28b9ac6736c791146a1a3ebe7f4826c22a9b7)
If we do not do that, it is not possible to position the cursor after
a long inset with the mouse.
To do this, it is necessary to add the pit information to the Row
object. This is a good idea in any case, and will allow to simplify
some code later on.
Fixes bug #10094.
(cherry picked from commit 8851645799ef67015e49fd75b9dfeed65d685e85)
While a one paragraph large collapsable inset (containing for example a tabular) could be very wide and trigger horizontal scrolling, the code that makes collapsable insets wide when they contain several paragraphs would actually make them narrower in this case.
Typical example is a wide tabular and a caption in a table float, where horizontal scrolling would not trigger.
(cherry picked from commit 8c7ace4b on 2.3.0-staging)
This is done by implementing the clickable method. It is not possible yet to have the usual left and down arrows, because Qt does not implement them as far as I can see.
Factor the code that triggers row/column selection and fix the logic. Now it is possible to select also at the right of the tabular inset.
When several bufferviews exist for the same inset, the data that depends on the view width have to be BufferView-dependent. While this is the case for several mutable members of InsetCollapsable, some were missing.
This commit makes button_dim_ (renamed from button_dim) and openinlined_ bv-dependent.
Get rid of the hitButton function.
Remove the bv-independent geometry() method and implement editable() explicitely instead.
Fixes bug #9756.
"echo -e" is definitely not portable. Use a plain loop instead.
Also use the automake silent rule mechanism to make the generation of monolithic source files visible.
While a one paragraph large collapsable inset (containing for example a tabular) could be very wide and trigger horizontal scrolling, the code that makes collapsable insets wide when they contain several paragraphs would actually make them narrower in this case.
Typical example is a wide tabular and a caption in a table float, where horizontal scrolling would not trigger.
(cherry picked from commit a879bc2575)
In some cases, the insets may change height or width without changing
the other apsects of the row.
Fixes bug #6991 and #10182.
(cherry picked from commit 508518ad95)
It is wrong to assume that direction is left-to-right when no indication exist.
Add a new enum with values LtR, RtL and Auto to be used as argument of
the private text() methods. When direction is Auto, let Qt decide how
the string shall be layed out.
This is reimplementation of 51ee267c. A direct cherry-pick was not possible.
Fixes bug #10169.
The computation of the width of the button was wrong. If <--> stands
for TEXT_TO_INSET_OFFSET/2 spacing, and if `[]' marks the button's
limits, then the intent is
<-->[<-->button text<-->]<-->
Therefore the physical grey rectangle width is
width - Inset::TEXT_TO_INSET_OFFSET
With this change, the spacing on the right of the button is not larger
than the left one.
Fixes bug #10147.
(cherry picked from commit 516d5d29dc)
There is already a spacing of 2 pixels on each side of a button (e.g.
collapsed inset). There is no need to add one extra pixel for command
insets.
Fixes part of bug #10149.
(cherry picked from commit 68149e380d)
When the box has a special width, one should not consider that as a fixed width. Otherwise, due to implementation quirks, the width will be set on screen as 1 inch.
A better solution would be to actually set the width by taking in account the contents width, height ans total height. This is not very difficult, but I do not know whether it would workout well in the work area.
Fixes bug #10048.
As such, it shall be protected in moving arguments, such as sections.
Fixes bug #10092.
(cherry picked from commit 86ee2699c30b63e5b4de3ad725519756d17aec2c)
Those two functions used two different hackish and buggy
implementation to know when the function is disabled. Replace that by
asking the containing inset whether it accepts inserting display math
inset.
Fixes bug #10033.
(cherry picked from commit de5630a1562054cb969b106e35f84bfe1e99002a)
The Reproducible Builds effort (https://wiki.debian.org/ReproducibleBuilds) in Debian (at least) means that 'ar' is built in deterministic mode as default: all timestamps are set to 0.
This is not compatible with the use of the 'u' flag, and therefore ARFLAGS has to be changed from 'cru' to 'cr'.
This gets rid of the harmless but annoying warning
ar: `u' modifier ignored since `D' is the default (see `U')
(cherry picked from commit 987fc1d15d017c192a566fc922e3967d9d280668)
When in a tabular cell, "this" is just a lone InsetText, while cur.inset() is the whole tabular. This makes a big difference, especially when one wants to count cells.
Fixes bug #9954.
(cherry picked from commit 4caf167dbd24722421ae8d94a2c103bf41a7667d)
inset-select-all has 3 levels
1. select current cell
2. select all cells
3. select inset from outside.
The second level makes sense for tables (text and math), but not for things like a math fraction.
Introduce a new method Inset::isTable() that allows to detect this case properly and skip level 2.
(cherry picked from commit 5de28b9ac6736c791146a1a3ebe7f4826c22a9b7)
If we do not do that, it is not possible to position the cursor after
a long inset with the mouse.
To do this, it is necessary to add the pit information to the Row
object. This is a good idea in any case, and will allow to simplify
some code later on.
Fixes bug #10094.
(cherry picked from commit 8851645799ef67015e49fd75b9dfeed65d685e85)
While a one paragraph large collapsable inset (containing for example a tabular) could be very wide and trigger horizontal scrolling, the code that makes collapsable insets wide when they contain several paragraphs would actually make them narrower in this case.
Typical example is a wide tabular and a caption in a table float, where horizontal scrolling would not trigger.
(cherry picked from commit 8c7ace4b on 2.3.0-staging)
This is done by implementing the clickable method. It is not possible yet to have the usual left and down arrows, because Qt does not implement them as far as I can see.
Factor the code that triggers row/column selection and fix the logic. Now it is possible to select also at the right of the tabular inset.
When several bufferviews exist for the same inset, the data that depends on the view width have to be BufferView-dependent. While this is the case for several mutable members of InsetCollapsable, some were missing.
This commit makes button_dim_ (renamed from button_dim) and openinlined_ bv-dependent.
Get rid of the hitButton function.
Remove the bv-independent geometry() method and implement editable() explicitely instead.
Fixes bug #9756.
"echo -e" is definitely not portable. Use a plain loop instead.
Also use the automake silent rule mechanism to make the generation of monolithic source files visible.
