This is a fixup to 8d8988de4. When a file is loaded and the cursor is
set, it is required to first compute metrics to be able to scroll the
screen correctly.
Fixes bug #11377.
As opposed to modules (from which the framework was initially borrowed),
we only allow one cite engine per document. Thus, we don't need to fiddle
with lists.
Compute a height from current font and current cell vertical
dimensions in MathData::metrics(), because this is where current font
is known.
Introduce BufferView::setCaretAscentDescent to remember this value.
This mechanism is not used for text because Cursor::current_font is
restored by undo, and the caret height would not be changed then. But
in principle it is doable.
The new code is much simpler: what it does is, after redrawing has
been done, to mark the cursor row as changed, so that it will be
repainted on next paint event.
This avoids some crashes at the price of possibly repainting the row
when it was not necessary.
This requires moving the bool that tracks this somewhere that it
is visible from BufferView. It seemed to make sense to put it as
a static member of InsetCitation.
Now people know for sure that I sometimes forget to test that code
actually works before committing. It was so straightforward, what
could possibly go wrong?
The function does not use for now any information from the BufferView
(only lyxrc), but this should eventually change if we want to honor
multi monitor setups properly.
This fixes a regression in e64ea357, where a test has been (badly)
tightened to avoid that two consecutive rows may be redrawn to get rid
of caret ghosts. The test prohibited empty rows from being redrawn.
Moreover, improve the test of cursor boundary to avoid the case where
cursor position is already 0.
Fixes bug #10952.
When the caret is at end of row, if may happen that it is drawn after
the end of the row. In this case caret blinking will not work
properly. This patch extends the row background on the left and right
by Inset::TEXT_TO_INSET_OFFSET. This is only a hack that will not work
if the caret has a ridiculous width like 6.
Additionally, introduce some (disabled) debug code that numbers the
rows on screen by painting order.
Finally, make the code that detects whether the caret was in a given
row more precise (take boundary into account).
Fixes (mostly, see above) bug #10797.
Along the lines suggested by JMarc, we now collect the list of bibfiles
in use in the updateBuffer routines. This actually does simplify the code
quite a bit. See the discussion there for reasons to go this way.
The goal of this commit is to ensure that a processUpdateFlags call
that requires no redraw will not override a previous one that did
require a redraw.
To this end, the semantics of the flag argument is now different: its
value is now OR'ed with a private update_flags_ variable. This
variable is only reset after the buffer view has actually been
redrawn.
A new Update::ForceRedraw flag has been added. It requires a full
redraw but no metrics computation. It is not used in the main code
(yet), but avoids to compute metrics repeatedly in consecutive
processUpdateFlags calls.
The process is now as follows:
- if flags is just None, return immediately, there is nothing to do.
- the Force flag is honored (full metrics computation) and replaced
with ForceDraw.
- the FitCursor flag is honored and removed from the flags.
- the SinglePar update is added if ForceDraw is not in flags and only
the current par has been modified.
The remaining flags are only then added to the BufferView update
flags, and the update strategy is computed for the next paint event.
Finally the dubious call to updateMacros in updateMetrics has been
removed for performance reasons.
The goal of this commit is to ensure that a processUpdateFlags call
that requires no redraw will not override a previous one that did
require a redraw.
To this end, the semantics of the flag argument is now different: its
value is now OR'ed with a private update_flags_ variable. This
variable is only reset after the buffer view has actually been
redrawn.
A new Update::ForceRedraw flag has been added. It requires a full
redraw but no metrics computation. It is not used in the main code
(yet), but avoids to compute metrics repeatedly in consecutive
processUpdateFlags calls.
Finally the dubious call to updateMacros in updateMetrics has been
removed for performance reasons.
The current spelling is not strictly wrong, but flagged as unusual or
historical by some authorities. It is also found fault with many
spell checkers. Thus we decided to move to the more standard "-ible"
form once and for all.
See #10678 for discussion
This part only covers the usage in comments and the like. More to follow.
This will all also all be backported to 2.3.x, for the sake of backwards
compatibility (cherry-picking).
For some reason the existing code only considered the bottom row that
contained the cursor. There is no need for that, and actually it
caused painting problems in nested insets.
Tweak the logic of repaint_caret_row_ a bit: there is no need for
repainting when there is currently no caret on screen.
If the height of the first row of the document has become smaller (for
example when it contains an image which size has shrunk), that the
anchor offset has to be adapted so that there is not a large blank
space at the top of the document.
This patch makes sure that, every time a ParagraphMetrics has its
position set, the inset positions for the insets held by this
paragraph are remembered too.
This is complementary to BufferView::updatePosCache, but I do not have
hard evidence that this is required other than to increase robustness.
It may help in some cases when scrolling the document (scrollbar,
cursor up/down, page up/down).
The trick is to remember in BufferView what has been done at the
previous draw, so that the row that contained the caret can be
repainted if needed.
To this end, add an argument paint_caret to BufferView, although
painting the caret is not the job of the BufferView (at this point).
BufferView::needRepaint will act as an interface with
TextMetrics::drawParagraph to know whether the painting of a given
row should be forced.
Currently everything is done at the top row level, so that, if the
caret is in a large table, the whole table will have to be repainted.
It is not clear yet that this is necessary.
Normally the two stages of drawing are
1/ compute metrics of insets/rows/paragraphs/mathrow...
2/ draw the elements and cache their positions
Now the three stages are
1/ metrics
2/ nodraw: do not draw the elements, but cache their position
3/ draw the elements (and store again their position; it does not
seems to hurt performance).
Revive the NullPainter: this replaces the setDrawingEnabled mechanism
with a painter that does nothing. The advantage is that updatePosCache
(renamed from setPosCache) does not need anymore to be invoked from
the frontend.
updatePosCache (the nodraw stage) is called at the end of
BufferView::updateMetrics.
Traditionally LyX behaves differently when the directive DEVEL_VERSION
is defined at compile time. This covers
* more detailed description of current position in status bar
* the help files are open in read/write mode
* more detailed debug output in the View Source panel
This patch introduces the new function devel-mode-toggle that allows
to use devel mode in stable releases, and vice versa.
The information is saved in the session file. The default is to
disable devel mode.
Remove all traces of DEVEL_VERSION in autoconf and cmake
This commit does a bulk fix of incorrect annotations (comments) at the
end of namespaces.
The commit was generated by initially running clang-format, and then
from the diff of the result extracting the hunks corresponding to
fixes of namespace comments. The changes being applied and all the
results have been manually reviewed. The source code successfully
builds on macOS.
Further details on the steps below, in case they're of interest to
someone else in the future.
1. Checkout a fresh and up to date version of src/
git pull && git checkout -- src && git status src
2. Ensure there's a suitable .clang-format in place, i.e. with options
to fix the comment at the end of namespaces, including:
FixNamespaceComments: true
SpacesBeforeTrailingComments: 1
and that clang-format is >= 5.0.0, by doing e.g.:
clang-format -dump-config | grep Comments:
clang-format --version
3. Apply clang-format to the source:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
4. Create and filter out hunks related to fixing the namespace
git diff -U0 src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace.patch
5. Filter out hunks corresponding to simple fixes into to a separate patch:
pcregrep -M -e '^diff[^\n]+\nindex[^\n]+\n--- [^\n]+\n\+\+\+ [^\n]+\n' \
-e '^@@ -[0-9]+ \+[0-9]+ @@[^\n]*\n-\}[^\n]*\n\+\}[^\n]*\n' \
fix_namespace.patch > fix_namespace_simple.patch
6. Manually review the simple patch and then apply it, after first
restoring the source.
git checkout -- src
patch -p1 < fix_namespace_simple.path
7. Manually review the (simple) changes and then stage the changes
git diff src
git add src
8. Again apply clang-format and filter out hunks related to any
remaining fixes to the namespace, this time filter with more
context. There will be fewer hunks as all the simple cases have
already been handled:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
git diff src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace2.patch
9. Manually review/edit the resulting patch file to remove hunks for files
which need to be dealt with manually, noting the file names and
line numbers. Then restore files to as before applying clang-format
and apply the patch:
git checkout src
patch -p1 < fix_namespace2.patch
10. Manually fix the files noted in the previous step. Stage files,
review changes and commit.
Length::inPixels(MetricsBase const &) and VSpace::inPixels(BufferView
const &) should be moved respectuvely to MetricsBase and BufferView:
core file are not supposed to use GUI files.
Introduce a distinction between being read-only and having the read-only flag. A
buffer is read-only if either it has been externally modified or if it has the
read-only flag.
Up to now Inset::dimension was either a helper function to access
CoordCache, or... something else. This created problems to properly
use it.
In particular, the definition of InsetText::dimension created problems
for child classes. Removing this definition (actually renaming it to
dimensionHelper) allows to streamline the code.
It turns out that Cursor::getFont() does not return a fully realized
font in some cases. This patch uses real_current_font instead, which
seems better anyway.
I suspect that all uses of getFont() should be removed, but this is
not code that I know well.
Fixes bug #10478.
