With non-TeX fonts, you can select a 'Non-TeX Font Default' math font, which simply loads unicode-math without actually selecting a math font, this then uses the default math otf font, currently Latin Modern. Other fonts still need to be set manually in the preamble, via \setmathfont.
The implementation suppresses unneeded package requests from unicodesymbols, but the output still uses macros instead of full unicode (both is possible with unicode-math).
The whole thing is a proof of concept, and it needs to be tested. I have tested it with the math manual, which compiles and seems to display correctly if I remove some hardcoded package loadings. OTOH I have not much experience with math.
This addresses #7449 partly.
This addresses #6543 by adding an option to prevent fonts such as Palatino and Times to automatically adapt the math font (IOW it lets you load the text font only for a bunch of fonts where this is easily possible).
Furthermore it adds an interface to select a specific math font, which is defined in latexfonts. Currently, this is only euler (the only one I know), but if there are other math-only tex fonts, they can be added easily (but note that this changes the file format).
Non-TeX math fonts are not yet supported. Eventually, unicode-math support can use the existing UI, but this is not on my agenda.
To avoid duplicity, remove natbib_authoryear and natbib_numerical
and replace them by natbib, and keep track of the engine `type'
in the new \cite_engine_type document setting. This will make it
easier to add more citation engines.
LyX format incremented to 424.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40592 a592a061-630c-0410-9148-cb99ea01b6c8
This holds the name of a BibTeX style file for now. Any BibTeX inset
can set the style to "default" to use the document-wide style.
LyX format incremented to 420.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40484 a592a061-630c-0410-9148-cb99ea01b6c8
- \negmedspace and \negthickspace outside of math
- \enspace, \hspace*, \hspace*{\fill} and \hfill inside math
(fileformat change)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39557 a592a061-630c-0410-9148-cb99ea01b6c8
Computes a hash value for the authors when using change tracking.
Text.cpp, BufferParams.h, Author.h:
Change unsigned int to int because the hash values can be negative.
lyx2lyx:
Allow to convert negative author_ids.
See also: r30756.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36134 a592a061-630c-0410-9148-cb99ea01b6c8
for formatted references. Fixes#2295, in so far as it makes it possible
to translate formatted references.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35623 a592a061-630c-0410-9148-cb99ea01b6c8
Note that I suggest we henceforth include the revision, as here, as one
sometimes wants to see precisely what was done.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34614 a592a061-630c-0410-9148-cb99ea01b6c8
- new buffer parameter \boxbgcolor
(I'm still working on the remaining issue #6626 as this affect not only this feature.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34083 a592a061-630c-0410-9148-cb99ea01b6c8
- new buffer parameter \fontcolor
- the default color is internally black because we have to set a color
- the font color is only used when the user explicitly specified a color
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34042 a592a061-630c-0410-9148-cb99ea01b6c8
- support to change the greyed-out note font color (fixes#3865)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33962 a592a061-630c-0410-9148-cb99ea01b6c8
I think it will be worth implementing a version of pure HTML output, for
some uses, a la eLyXer.
Note that at present none of this does anything, and there is no UI to
set it. I just want to make sure it's in the file format, in case I do
not get to this before 2.0.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33794 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change (lyx2lyx code follows the next days)
- the patch is a joint work of Edwin and me
The patch is huge but the major parts work already. I put it in now as the minor known issues can be solved step by step the next days. I think this is the best solution because collaborating with such large patches already lead to copy/paste bugs.
The known issues are listed here:
http://wiki.lyx.org/Devel/Multirow
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33414 a592a061-630c-0410-9148-cb99ea01b6c8
page numbering and the references of the master file are maintained in the included children (bug 1005).
I made this optional since some people use \includeonly to save compilation time, but a proper aux file update
needs a full compilation of the complete master prior to the compilation of the \includeonly master.
Hence, a new buffer param is introduced (file format change).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32936 a592a061-630c-0410-9148-cb99ea01b6c8
The German layouts are replaced by the English ones.
German localization is now done as it is supposed to be: via gettext.
A file format change was needed to do this.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32406 a592a061-630c-0410-9148-cb99ea01b6c8
The fileformat change is also needed because of our mistake that we load mhchem since LyX 1.6.4 automatically so that files created with LyX 1.6.4 won't compile under LyX 1.6.3. Now at least all files created or opened with LyX 1.7 can be reverted to the fileformat of LyX 1.6.x and can therefore be read by all LyX 1.6.x versions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31941 a592a061-630c-0410-9148-cb99ea01b6c8
This patch makes sure that there are minimal changes when loading and saving a file with change tracking.
- the authors are assigned a buffer_id, such that when the file is saved, they get the same id,
- the authorlist is sorted according to the buffer_id,
- the buffer_id is written to the file in the author list (file format change)
- the ids start with 1, because 0 is internally reserved for the current Author,
- when writing the file, the current author is assigned an id if he didn't already have it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30756 a592a061-630c-0410-9148-cb99ea01b6c8
- GUI support for table alignment
(all comments to the polished layout of the table dialog welcome)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30477 a592a061-630c-0410-9148-cb99ea01b6c8
No automatic width calculation is done for old documents, because these might rely on settings in
nomencl.cfg.
A GUI to alter this is needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29775 a592a061-630c-0410-9148-cb99ea01b6c8
** fix bug 5343 (patch from Richard, prerequisite for the other fix)
* Buffer.cpp:
- increment format to 343
* src/BufferParams.{cpp,h}:
- new param \use_default_options that allows to select/deselect
the "Other" class options defined in the layout file.
* src/frontends/qt4/GuiDocument.cpp:
* src/frontends/qt4/ui/LaTeXUi.ui:
- add GUI to set \use_default_options, display predefined options in the dialog
- update dialog correctly on class change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26860 a592a061-630c-0410-9148-cb99ea01b6c8
- the display combo in the prefs, external and graphics dialogs are gone
- the lyxrc display_graphics option now overrides any local inset display option
- The external template format has a new tag: Preview
- format incremented to 337
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25245 a592a061-630c-0410-9148-cb99ea01b6c8
file has been changed to "space" to match the identifier used for the inset in
Inset.cpp and for the dialog in GuiView.cpp.
In future, we will want to get a similar uniformity elsewhere: The identifier
used in the LyX file should match the one used as inset identifier. The easy
way to do this, in the code, is to have insets write themselves this way:
os << insetName(lyxCode()) << " ";
rather than at present:
os << "space ";
Similar things could then happen elsewhere. E.g., if the dialog names are in
sync with the inset names, then we could do something like:
hideDialogs(insetName(lyxCode()), this);
rather than
hideDialogs("space", this);
and perhaps even put that into the Inset destructor rather than have specific
versions in each inset---with a test for whether there is such a dialog, of
course.
But this is all for later.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25016 a592a061-630c-0410-9148-cb99ea01b6c8
- Use styleguide-conforming headings in the APA layout (bug 4827).
* src/Buffer.cpp:
- file format change to 333.
* lib/lyx2lyx/lyx_1_6.py:
- convert obsoleted layouts.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24694 a592a061-630c-0410-9148-cb99ea01b6c8
- GuiGraphics dialog field for setup new groups.
- Graphics context menu for assigning to certain group.
- Fileformat change for groupId field in Graphics inset.
- Undo mechanism added to inset-apply, for catching changes
in preference dialog.
- Qt designer 4.4 used now.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24644 a592a061-630c-0410-9148-cb99ea01b6c8
file format change.
This is the last feature for today. Promised.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24540 a592a061-630c-0410-9148-cb99ea01b6c8
Provide only one Japanese language that is encoding independent, patch partly by Koji Yokata.
This fixes http://bugzilla.lyx.org/show_bug.cgi?id=4597
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24053 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Buffer.cpp:
- file format change to 324
* development/FORMAT:
- document file format change
* src/insets/InsetNewline.{cpp,h}:
- the former two separate derivates are now merged into one inset
with proper Params and Mailer. This simplifies the structure and allows for
switching between the two kinds.
* src/Text3.cpp:
- The newline insets are now being generated with
newline-insert [newline|linebreak]
* src/factory.cpp:
* src/Text.cpp:
- Newline inset is now a proper inset with opening and closing tag.
* src/FuncCode.h:
* src/LyXAction.cpp:
* src/Text3.cpp:
* src/insets/InsetCollapsable.cpp:
* src/insets/InsetTabular.cpp:
* src/mathed/InsetMathGrid.cpp:
* src/mathed/InsetMathHull.cpp:
- remove LFUN_NEW_LINE, LFUN_LINE_BREAK,
add LFUN_NEWLINE_INSERT
* lib/lyx2lyx/LyX.py:
* lib/lyx2lyx/lyx_1_6.py:
- conversion and reversion routines for newline insets.
* lib/ui/stdmenus.inc:
* lib/ui/stdcontext.inc
- adapt menu and add context menu to switch between newpage variants.
* lib/bind/*.bind:
- adapt to new lfuns.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23966 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Buffer.cpp:
- file format change to 323
* development/FORMAT:
- document file format change
* src/insets/InsetNewpage.cpp:
- the former four separate derivates are now merged into one inset
with proper Params and Mailer. This simplifies the structure and allows for
switching between the various kinds.
* factory.cpp:
- The newpage insets are now being generated with
newpage-insert [newpage|pagebreak|clearpage|cleardoublepage]
* src/Text.cpp:
- Newpage inset is now a proper inset with opening and closing tag.
* src/FuncCode.h:
* src/LyXAction.cpp:
* src/Text3.cpp:
* src/insets/InsetCollapsable.cpp:
- remove LFUN_PAGEBREAK_INSERT, LFUN_CLEARPAGE_INSERT
and LFUN_CLEARDOUBLEPAGE_INSERT
* lib/lyx2lyx/LyX.py:
* lib/lyx2lyx/lyx_1_6.py:
- conversion and reversion routines for newpage insets.
* lib/ui/stdmenus.inc:
- adapt menu and add context menu to switch between newpage variants.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23942 a592a061-630c-0410-9148-cb99ea01b6c8
- gets rid of the M_TOGGLE_LINE_... functions
- allows arbitrary clines without multicol
- sets arbitrary vertical lines through multicol
- drop row/col line properties, everything is now stored at the cell level
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23812 a592a061-630c-0410-9148-cb99ea01b6c8
LyX file format to 318. The Embedded files panel of document settings has
been simplied, with working add and remove buttons. Note that bease BufferParams
lacks buffer path information, extraEmbeddedFiles are vector<string>, instead
of EmbeddedFileList (as previously planned).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23606 a592a061-630c-0410-9148-cb99ea01b6c8
- file format change
- new example files and an example address database
- remove ugly hack from scrlttr2.layout and fix bug 4529
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22764 a592a061-630c-0410-9148-cb99ea01b6c8
The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files.
By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation.
So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts:
(i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently.
(ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump.
The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework.
I've also updated the module documenation to accord with this change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change
(Interlingua was the last missing language supported by babel)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21976 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change
(I wonder why support for them was removed (must be before LyX 1.3), because the old reLyX script listed them as supported)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21783 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change
- tex2lyx support
- rename LFUN_BREAK_LINE to LFUN_NEW_LINE because this is what the lfun does and to avoid confusions
- new menu entry
- new shortcut C-S-Return
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21778 a592a061-630c-0410-9148-cb99ea01b6c8
- rename former "pagebreak" to "newpage" since it produces a \newpage
- new LFUN
- menu entry
- tex2lyx support
- fileformat change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21732 a592a061-630c-0410-9148-cb99ea01b6c8
- add support for hyerlink targets - fileformat changed
(For Hyperlink.cpp I still need help to get rid of the strings and chars and use docstrings and char_type instead!)
Can anyone please open the changed Hyperlink.ui with a Qt 4.2 designer or below, save it and commit? Thanks. (Otherwise you cannot compile it.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21347 a592a061-630c-0410-9148-cb99ea01b6c8
(previous fileformat change to 296 by Richard is not yet described in FORMAT)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21302 a592a061-630c-0410-9148-cb99ea01b6c8
- rename the lfun to href-insert.png
- rename the files to Hyperlink...
- the former URLUi produces now \href commands (hyperref)
Only missing thing is the lyx2lyx conversion routine - this will be done by Richard
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20950 a592a061-630c-0410-9148-cb99ea01b6c8
(i) The file format is changed, so that command insets are represented as:
\begin_inset CommandInset insetype
LatexCommand command
...
\end_inset
This involves some lyx2lyx and changes to the readInset() routine in factory.cpp
(ii) The InsetCommand and InsetCommandParams classes also have to be changed, as the command name was used in these classes for various purposes for which the inset type ought really to be used.
Further clean-up to come.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20544 a592a061-630c-0410-9148-cb99ea01b6c8
(besides this, note that the fileformat change to 285 is not yet documented in FORMAT)
- lyx2lyx/lyx_1_6.py: fix routine to revert the PDF-support stuff
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20448 a592a061-630c-0410-9148-cb99ea01b6c8
- Format incremented to 284
- LaTeX-package wrapfig is now used instead of flotflt for wrap floats (this allows us to implement now also a table wrap float)
(the optional overhang argument of wrapfig will be implemented later)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20185 a592a061-630c-0410-9148-cb99ea01b6c8
(multi-encoding -> utf8); specifically, the language was being
incorrectly identified in certain insets, which of course led to
encoding problems.
This fixes part of bug 3613 (http://bugzilla.lyx.org/show_bug.cgi?id=3613).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19151 a592a061-630c-0410-9148-cb99ea01b6c8
- Split the language Arabic into "arabic_arabi" that uses the arabi-package and "arabic-arabtex" that uses the arabTeX-package to typeset Arabic. This is needed because both packages have some advantages over the other people need.
(This change is a consequence of a long and fruitful discussion with Mostafa, Dov, and me.)
Patch by Dov and me.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18887 a592a061-630c-0410-9148-cb99ea01b6c8
language to be in the paragraph's language. This is necessary due to format
change 259, but the language was forgotten in lyx2lyx back then. It's important
for Bidi documents.
(fixes bug http://bugzilla.lyx.org/show_bug.cgi?id=3789)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18766 a592a061-630c-0410-9148-cb99ea01b6c8
Introduces new encodings for the CJK-languages.
The CJK-languages can now be selected from LyX's menu.
For remaining small problems, see the thread "Help needed for bug 3043" on the devel-list.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18216 a592a061-630c-0410-9148-cb99ea01b6c8
- add new encoding utf8-plain for the sake of XeTeX users (bug 3526)
* src/BufferParams.cpp:
- implement new encoding (skip inputenc)
- fix logic error with thailatex
* src/Buffer.cpp:
* lib/lyx2lyx/LyX.py:
* lib/lyx2lyx/lyx_1_5.pyx:
* development/FORMAT:
- format increment to 267
- reset encoding to utf8 on reversion.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18198 a592a061-630c-0410-9148-cb99ea01b6c8
Uwe, please add an exact decsription of the lyxline changes to
development/FORMAT: How did the old version work, and what are the changes
of the new one.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16991 a592a061-630c-0410-9148-cb99ea01b6c8
\inputencoding default
* src/paragraph_pimpl.C
(isEncoding): Explain why bparams.inputenc == "default" is ignored
* src/bufferparams.C
(BufferParams::encoding): Determine the encoding from the language
for inputenc == "default"
* src/buffer.h
(writeLaTeXSource): Mention inputenc == "default" in documentation
* src/bufferparams.h
(inputenc): Update documentation of "default"
* src/output_latex.C
(switchEncoding): Switch the encoding also for inputenc == "default",
but don't output \inputencoding commands in that case
* lib/lyx2lyx/LyX.py
(get_encoding): Determine the encoding from the language for
inputencoding == "default"
* lib/lyx2lyx/lyx_1_5.py
(convert_multiencoding): ditto
* development/FORMAT: Update documentation of \inputencoding default
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16667 a592a061-630c-0410-9148-cb99ea01b6c8
encodings in the preferences dialog
* src/LaTeXFeatures.C: special treatment for tis620-0 encoding
* src/bufferparams.C: ditto
* src/output_latex.C: ditto
* src/encoding.[Ch]: Add the possibility to iterate over all encodings
* src/paragraph_pimpl.C: Add latin10 and cp858 to Euro treatment
* src/buffer.C: Update format number
* src/frontends/qt4/QDocumentDialog.C: Don't hardcode available
encodings
* lib/lyx2lyx/LyX.py,
lib/lyx2lyx/lyx_1_5.py: implement conversion from 256 to 255
* lib/encodings: Add some encodings, fix all "unknown" entries
* development/FORMAT: Document file format change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16418 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): ditto
* src/text3.C
(LyXText::dispatch): ditto
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
* development/FORMAT: document new format
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer:
file format incrementation to 251
* src/insets/insetcharstyle.[Ch]:
- make show_label a param and save its state
- let all-insets-toggle togle the label in charstyles
* development/FORMAT:
document file format change
* lib/lyx2lyx/LyX.py:
add new file format
* lib/lyx2lyx/lyx_1_5.py:
remove char style label param on reversion to 250.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15345 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/lyx2lyx/LyX.py (format_relation): add file format 247 (from Georg BAUM).
* lib/lyx2lyx/lyx_1_5.py: add convert_font_settings, revert_font_settings (from Georg BAUM).
* lib/chkconfig.ltx: Test for newly supported font packages
* lib/doc/LaTeXConfig.lyx.in: document newly supported font packages
* lib/doc/UserGuide.lyx: document new UI.
* lib/doc/Extended.lyx: update PostScript font documentation
* development/FORMAT: document file format change 246->247.
* src/tex-strings.[Ch]: new strings tex_fonts_roman, tex_fonts_sans,
tex_fonts_monospaced (with GUI equivalents).
* src/buffer.C: Format up to 247.
* src/bufferparams.C:
new params fontsRoman, fontsSans, fontsTypewriter, fontsDefaultFamily,
fontsSC, fontsOSF, fontsSansScale and fontsTypewriterScale
(LyXFont const BufferParams::getFont): consider switch of default family.
(string const BufferParams::loadFonts): new method to get all the LaTeX
font stuff done.
* src/paragraph.C
(LyXFont const Paragraph::getFont):
(LyXFont const Paragraph::getLabelFont):
(LyXFont const Paragraph::getLayoutFont): user buffer's not textclass's
default font
* src/text.C
(int LyXText::leftMargin):
(int LyXText::rightMargin): user buffer's not textclass's default font
* src/text2.C
(LyXFont LyXText::getFont):
(LyXFont LyXText::getLayoutFont):
(LyXFont LyXText::getLabelFont): check if the family of the default document
font has been customized.
* src/frontends/gtk/GDocument.[Ch]: implement new font ui (from Georg BAUM).
* src/frontends/gtk/glade/document.glade: implement new font ui (from Georg BAUM).
* src/frontends/qt3/Makefile.dialogs: add new FontModuleBase
* src/frontends/qt3/ui/FontModuleBase.ui: new File
* src/frontends/qt3/ui/TextLayoutModuleBase.ui: remove font widgets
* src/frontends/qt3/QDocument.C
* src/frontends/qt3/QDocumentDialog.[Ch]: implement new font ui
* src/frontends/qt4/Makefile.dialogs: add new FontUi
* src/frontends/qt4/QDocumentDialog.[Ch]: implement new font ui
* src/frontends/qt4/ui/FontUi.ui: new File
* src/frontends/qt4/ui/TextLayoutUi.ui: remove font widgets
* src/frontends/qt4/ui/compile_uic.sh: add new FontUi
* src/frontends/xforms/FormDocument.[Ch]: implement new font ui
* src/frontends/xforms/forms/form_document.fd: add new font tab.
* src/frontends/controllers/ControlDocument.[Ch]
(char ControlDocument::fontfamilies):
(char ControlDocument::fontfamilies_gui):
(bool ControlDocument::isFontAvailable):
(bool ControlDocument::providesSC):
(bool ControlDocument::providesOSF):
(bool ControlDocument::providesScale): new methods, providing font info.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14143 a592a061-630c-0410-9148-cb99ea01b6c8
BTW: floats are still broken (dialogs do not get updated). No idea where this bug sits.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@8557 a592a061-630c-0410-9148-cb99ea01b6c8
Natbib users can now use the before field.
file format is up to 230.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@8479 a592a061-630c-0410-9148-cb99ea01b6c8
