Multirows were introduced in 8bb69f24 (Uwe Stoehr, 11 Feb 2010). In the
computation of the nearest cell, it was forgotten to account for the
vertical offset. tabular.cellHeight is the full height of the cell, while
the point that comes from the coordCache is offsetted by VOffset.
Therefore, we have to subtract the VOffset from o.y_.
* do not terminate macros by {} if not necessary (prevent kerning violation)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40891 a592a061-630c-0410-9148-cb99ea01b6c8
Currently only basic functionality (our math-tipa functionality plus multipar input). Further enhancements (such as proper unicode input and a specific toolbar) are planned. DocBook and XHTML output also need to be audited.
The lyx2lyx reversion routine surely can be improved (help appreciated), and I don't know tex2lyx enough to handle this file format change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40867 a592a061-630c-0410-9148-cb99ea01b6c8
Add a new layout syntax CiteEngine to define the citation commands
available for a given citation engine.
Also extend the CiteFormat syntax to allow more customization. This
mechanism, previously used to produce bibliography entries in the
citation GUI based on the BibTeX entrytype, is now also used to
produce the textual labels for citation insets in the buffer view.
Thus citation styles are almost completely customizable by modules.
Modules for the basic, jurabib and natbib engines are implemented.
Layout format incremented to 37.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40820 a592a061-630c-0410-9148-cb99ea01b6c8
* now hasSettings only means... that the inset has a settings dialog
* and clickable means that something should happen with left-clicking on the inset
Some inset behaviours are changed:
* (V)Space insets are not clickable anymore (the settings dialog is still accessible via context menu and Edit menu)
* TOC inset is now shown as active
* FloatList inset is shown as active and clicking on it opens the relevant part of the TOC dialog
This could be a candidate for branch (2.0.4)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40755 a592a061-630c-0410-9148-cb99ea01b6c8
- 0x200c is equivalent to \textcompwordmark
- 0x2011 is equivalent to \nobreakdash-
- 0x2009 is a breakable thin space (the old definition was non-breakable)
- 0x202f is a non-breakable thin space
- add spaces 0x2007, 0x2008, 0x200a and 0x200b
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40694 a592a061-630c-0410-9148-cb99ea01b6c8
To avoid duplicity, remove natbib_authoryear and natbib_numerical
and replace them by natbib, and keep track of the engine `type'
in the new \cite_engine_type document setting. This will make it
easier to add more citation engines.
LyX format incremented to 424.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40592 a592a061-630c-0410-9148-cb99ea01b6c8
This holds the name of a BibTeX style file for now. Any BibTeX inset
can set the style to "default" to use the document-wide style.
LyX format incremented to 420.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40484 a592a061-630c-0410-9148-cb99ea01b6c8
(i) Validate even for comments when outputting XHTML.
(ii) Output comments as divs hidden by default. Then people
can display them other ways if they wish.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40400 a592a061-630c-0410-9148-cb99ea01b6c8
"from-dialog" is added to the LFUN_INSET_MODIFY function when it is issued from the table settings dialog. This is done to prevent the checking of the individual parameters, because it has to consider all parameters alltogether. Besides, when issued from the dialog it is already guaranteed that the parameters are valid.
This parameter should not be passed onto tabularfeatures.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40376 a592a061-630c-0410-9148-cb99ea01b6c8
It is valid for a label to be empty, but up to now the bibliography
information was not updated when a label was emptied.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40347 a592a061-630c-0410-9148-cb99ea01b6c8
from the context menu. As mentioned in the FIXME, we cannot now
handle the case where the branches are held in a master buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40334 a592a061-630c-0410-9148-cb99ea01b6c8
In this case, the inset parameters win in case there is any conflict. The only
exception is "type=eps", since I was too lazy to make the full keyval parser
of tex2lyx available to InsetGraphics in order to parse the special parameter.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40298 a592a061-630c-0410-9148-cb99ea01b6c8
file names with a proper one: Only replace dots in the base name, and only
request the lyxdot feature if it is needed. This is a partial fix of bug #7650.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40115 a592a061-630c-0410-9148-cb99ea01b6c8
This restores \input@path handling, which turns out to be necessary, as
the TEXINPUTS mechanism is not used with relative paths. It turns out
that both methods must be used, because \input@path does not work in all
cases (most notably with tikz).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39918 a592a061-630c-0410-9148-cb99ea01b6c8
A long standing bug has been fixed in GCC 4.7, the bug was a non-
sactioned extra lookup. This caused some code to work that really
shouldn't.
The fixes are: add this->, Class::, or move functions about
as required to fullfill the rules.
In this case some template instantiations
where move to after what they reference.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39813 a592a061-630c-0410-9148-cb99ea01b6c8
(e.g., compressed dia, odg, sxd, ...). These need to be marked via the "zipped=native" flag in the RC file.
The old 'dia' configuration is automatically updated (it used to be hardcoded in the code, now it is handled
via the flag).
See also http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg170974.html
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39705 a592a061-630c-0410-9148-cb99ea01b6c8
- Remove hack with $$AbsOrRelPath substitution in the guiName.
Instead, let LyX display the filename automatically in the gui,
consistent with InsetInclude.
- Use the guiName in the drop-down menu in the dialog instead of the
internal lyxName. These guiNames ought to be more descriptive.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39675 a592a061-630c-0410-9148-cb99ea01b6c8
- \negmedspace and \negthickspace outside of math
- \enspace, \hspace*, \hspace*{\fill} and \hfill inside math
(fileformat change)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39557 a592a061-630c-0410-9148-cb99ea01b6c8
The PreviewLoader is created directly by Buffer on demand. The PreviewLoader cache was complex and unneeded because there is one and only one PreviewLoader per Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39276 a592a061-630c-0410-9148-cb99ea01b6c8
* uniqueLabel(docstring & label) to enforce label unicity
* updateLabel() to update only the label.
* InsetLabel::updateLabelAndRefs() to update label & refs
* InsetLabel::updateReferences() to update the references
This fixes bug #7655
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39250 a592a061-630c-0410-9148-cb99ea01b6c8
It's amazing we haven't seen problems with this before. The basic problem is that buf.errorList("whatever") would always return the same global, static error list, if it did not already exist. So, to a significant extent, there was only one global error list!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38980 a592a061-630c-0410-9148-cb99ea01b6c8
It's amazing we haven't seen problems with this before. The basic problem is that buf.errorList("whatever") would always return the same global, static error list, if it did not already exist. So, to a significant extent, there was only one global error list!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38978 a592a061-630c-0410-9148-cb99ea01b6c8
Otherwise, we were asking to construct strings of random size at a
certain point, e.g., two 2GB strings, in one case I saw.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38704 a592a061-630c-0410-9148-cb99ea01b6c8
inset to know that the BibTeX data had changed. So we introduce a
Buffer-wide variable that we can query for that information.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38619 a592a061-630c-0410-9148-cb99ea01b6c8
As the bug report notes, you do NOT get this crash if you move up or
down in the table a bit before you do the rest. The reason is that
moving up and down sets the cursor's x_target_, and it is because that
is not set that we enter the other code at all and eventually crash.
That is, in InsetTabular's dispatch, we have:
(*) cur.pos() = tm.x2pos(cur.pit(), pm.rows().size()-1, cur.targetX());
You can see the potential for trouble here already. cur.pit() is in the
NEW cell, i.e., the one to which we are moving; it was changed a few
lines previously, and cur.idx() points to the new cell, too. But we are
trying to calculate cur.pos(), which means that cur.pos() is currently
the one from the OLD cell. So the cursor is in an inconsistent state.
Calling cur.targetX() leads us to call Cursor::getPos(), and that is
what causes the crash.
We fix the problem by making sure we call targetX() on the original
cursor. The same problem clearly exists in the DOWN stuff, so we fix
that, too.
By the way, should we be setting x_target_ here once we have calculated
it?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38530 a592a061-630c-0410-9148-cb99ea01b6c8
documents and graphics were not copied to the export directory, since
the format passed to addExternalFile() was wrong.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38378 a592a061-630c-0410-9148-cb99ea01b6c8
involves no change of functionality, due to the fall-back mechanism and
is needed for XHTML CSS output for the boxes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38225 a592a061-630c-0410-9148-cb99ea01b6c8
Also, if we're "undefined", then we should just continue reading.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38116 a592a061-630c-0410-9148-cb99ea01b6c8
of a flex InsetLayout, let's check for it when we hit a LyXType tag, and
refuse to honor it unless we have the right sort of name.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38115 a592a061-630c-0410-9148-cb99ea01b6c8
- Have InsetFlex::layoutName() report "Flex:" + the inset name.
- Do some layout2layout work so that user insets that do not have
the "Flex:" prefix get it.
Note that this will break some CopyStyle stuff, but we do not have any
decent way to do that, so users will have to make that change for
themselves. I guess we should add that to the release notes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38112 a592a061-630c-0410-9148-cb99ea01b6c8
preparatory to fixing #7080. Note that mathed uses the same routine, but
for a completely different purpose, so I did not rename it there. I have
seen no difference in behavior after testing, e.g., opening and
exporting Math.lyx, and also re-saving it and looking at the diff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38109 a592a061-630c-0410-9148-cb99ea01b6c8
- don't assume that the exported file extension is .tex
- use converter tool chain to produce a latex file for input or include
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38025 a592a061-630c-0410-9148-cb99ea01b6c8
make NOBREAKDASH isLetter()
* Paragraph.cpp (isWord separator):
handle composites with hyphens as one word (i.e., "-" is not a word separator).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37946 a592a061-630c-0410-9148-cb99ea01b6c8
under refstyle, since (a) the default refstyle.cfg defines \eqref itself
and (b) does NOT define it the way AMS does. So we simply output:
(\ref{label})
in this case, to match what we say in the UI.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37918 a592a061-630c-0410-9148-cb99ea01b6c8
Currently, if an inset outputs a newline, the new latex row is still
associated with a previous id/pos. Now, if a latex error occurs before
this newline, we would still highlight everything associated to that
id/pos, even if it is extraneous to the error.
This is avoided by associating the new latex row with the id/pos in
effect right before entering the inset. If an inset does not output
a newline, it is not excluded from the selection, consistent with the
fact that the text of the inset does appear in the error description.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37903 a592a061-630c-0410-9148-cb99ea01b6c8
This improves the fix in r37328 and allows centered sweave chunks, for example (although this does not work yet for other reasons)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37831 a592a061-630c-0410-9148-cb99ea01b6c8
resetFontEdit(). The former is used for on-screen and export formatting,
and the latter is used for interactive editing.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37761 a592a061-630c-0410-9148-cb99ea01b6c8
- (getLastCellInRow): fix crash when in first multirow row
- (TeXRow): do not output row separator in in last row (bug #7294).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37709 a592a061-630c-0410-9148-cb99ea01b6c8
This went in without discussion and is IMHO wrong (bug #7055 is invalid).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37676 a592a061-630c-0410-9148-cb99ea01b6c8
latex error occurs inside a table, the exact faulty table row is spotted.
However, if all cells of a table row are output on the same line, lyx is
not able to tell what cell caused the error and highlights the last cell
of the row. This patch allows to output each cell of a table on its own
line, such that the exact point where the error occurred can be highlighted.
Note that this is only done when exporting for preview, and in normal (nice)
exports everything goes as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37643 a592a061-630c-0410-9148-cb99ea01b6c8
If no initializer is specified for an object, and the object is of (possibly
cv-qualified) non-POD class type (or array thereof), the object shall be
default-initialized; if the object is of const-qualified type, the underlying
class type shall have a user-declared default constructor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37603 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
The quick solution is to output a % sign before \n. The better one
would be doing as in mathed, but it is not so straightforward.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37320 a592a061-630c-0410-9148-cb99ea01b6c8
longtable or not, e.g., in the docbook and xhtml output routines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37204 a592a061-630c-0410-9148-cb99ea01b6c8
of things like:
pit.push_back(CursorSlice(*this));
which I've had to change to:
pit.push_back(CursorSlice(const_cast<InsetCaption &>(*this)));
and similarly in a few other places.
If anyone thinks we should instead have:
explicit CursorSlice(Inset const &);
then we can also do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37192 a592a061-630c-0410-9148-cb99ea01b6c8
better than what we had, anyway, since we do not calculate the tocstring
unless we need it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37190 a592a061-630c-0410-9148-cb99ea01b6c8
Unfortunately the commandline export of InsetInfo is still broken for MENU_INFO.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37134 a592a061-630c-0410-9148-cb99ea01b6c8
- use correct params for INDEX_CODE and INDEX_PRINT_CODE (bug 7180).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37104 a592a061-630c-0410-9148-cb99ea01b6c8
The problem is/was that when copying an InsetTableCell?, the macrocontext_position_ and the buffer_ were not copied. That's why in InsetTabular?@splitCell@521 and in InsetTabular::TeXRow() and in InsetTabular::metrics we manually copy this into the new object.
However, splitCell() returns the object by-value. So, when we call
InsetTableCell tail = splitCell(head, column_info[c].decimal_point, hassep);
the new object is copied into tail and we lose the buffer_ and macro_contextposition. Later we will crash.
What does *nix in this case ? Apparently they don't make buffer and/or macro_contextposition 0.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37072 a592a061-630c-0410-9148-cb99ea01b6c8
to be treated as part of the document. For example, the footnote numbers
in LyX are wrong prior to this patch.
This will also affect word and character count, but should not affect
anything else. If that seems wrong, we can either (a) explicitly exclude
notes from the word count or else (b) introduce
bool countWordsInInset() const;
and call that, instead.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36976 a592a061-630c-0410-9148-cb99ea01b6c8
that also makes sure it doesn't do more work than it needs to do, by
limiting the size to 40 characters. Previously, InsetBranch::addToToc()
would have added a string representing the entire contents of the
branch! It's hard to imagine that having to recalculate that sort of
thing doesn't cause some problems with speed, especially in documents
with lots of notes and branches and such.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36974 a592a061-630c-0410-9148-cb99ea01b6c8
Using updateMacros() entails a performance hit when loading a document
with really a lot of macros. So, revert to the original strategy of
tracking macros at creation time. In order to also account for macros
defined in a child document, the child is now loaded by the include inset
at construction time instead of after the master has finished loading.
This strategy mimics what updateMacros() was accomplishing without
incurring in its drawbacks, such that loading time is practically
unchanged even with a thousand macros.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36968 a592a061-630c-0410-9148-cb99ea01b6c8
* only one for loop
* uses runparams.par_end
InsetInclude and InsetIext: initialize runparams.par_begin and runparams.par_end
Except for a few additonal empty lines the LateX exports are identical for all help files. The reason for the additional empty lines is the more consistent TeXEnvironment() call.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36934 a592a061-630c-0410-9148-cb99ea01b6c8
Previously LFUN_INSET_SETTINGS was misused to show the outliner. As a TOC doesn't have settings, it was no longer showed after a refactorization of LFUN_INSET_SETTINGS/LFUN_MOUSE_RELEASE because InsetToc::hasSettings() returns false.
As this is a special case, we should handle this special case in InsetTOC itself.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36907 a592a061-630c-0410-9148-cb99ea01b6c8
strings in the layout file, but they were not used.
Question: Should we just remove InsetNote::setButtonLabel() now? The
only purpose it is serving is to provide a backup in case no label is
defined.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36884 a592a061-630c-0410-9148-cb99ea01b6c8
risk, due to our lack of control over the links and the program used to
view them.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36789 a592a061-630c-0410-9148-cb99ea01b6c8
menus were (intentionally) missing, and it turns out they were needed.
Normally all invocations of INSET_MODIFY should trigger a recordUndo now.
Of course all cases have not been tested, but it should be working.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36770 a592a061-630c-0410-9148-cb99ea01b6c8
updateBuffer() traversal. The reason is simple: InsetCitation needs
access to the BibTeX info to calculate its label. But we won't have it
until we get to the bibliography.
I don't think there is any way around that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36710 a592a061-630c-0410-9148-cb99ea01b6c8
The issue is that RenderGraphics calls updateFrontend() even if within a CutAndPaste stask.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36699 a592a061-630c-0410-9148-cb99ea01b6c8
to be passing the BiblioInfo structure around this way. (That's an old
holdover.) That lets us get rid of the non-const masterBibInfo() again.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36697 a592a061-630c-0410-9148-cb99ea01b6c8
bibliography information in updateBuffer(), rather than doing a wholly
separate traversal. We still do a separate traversal in two cases, as a
full updateBuffer() call just isn't needed there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36696 a592a061-630c-0410-9148-cb99ea01b6c8
Strangely enough, the code to go after the inset is here explicitely (so somebody thought at some time that it was a good idea. However, it is not active in 1.6.x...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36595 a592a061-630c-0410-9148-cb99ea01b6c8
THis is a consequence of the new AtPoint mechanism. In the old
world, recordUndoInset was called before INSET_MODIFY. I reintroduced
manual recordUndoInset calls in all places that matter. I suspect
that this issue should be revisited later.
Note that recordUndoInset can now take an optional parameter that tells
what inset is concerned. This is useful because the cursor can be
either just inside the inset or in front of it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36580 a592a061-630c-0410-9148-cb99ea01b6c8
- if a master is compiled with XeteX or LuaTeX, all children must have plain utf8 encoding
(bug #6774).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36554 a592a061-630c-0410-9148-cb99ea01b6c8
fail e.g., of URLs in math, since tocString() is called by
Paragraph::asString() to give us the contents of insets. Probably, I was
misled by the name, and the comment in Inset.h. That means, at least,
that this method is misnamed, but it probably means we do the wrong
thing in other cases.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36517 a592a061-630c-0410-9148-cb99ea01b6c8
This introduces an isFullUnicode() function to OutputParams that currently only contains XETEX, but later can also contain other fully unicode-aware backends (LUATEX for instance).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36445 a592a061-630c-0410-9148-cb99ea01b6c8
- if column of multirow has no width, the alignment is that of the column
- otherwise multirows are fix left-aligned
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36403 a592a061-630c-0410-9148-cb99ea01b6c8
(the onlycolumn flag is not necessary in setAlignment (but in getAlignment) because it is in every case the same as !IsMultiColumn)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36402 a592a061-630c-0410-9148-cb99ea01b6c8
we first do a range test, then check the status. I think this is right
in both cases.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36351 a592a061-630c-0410-9148-cb99ea01b6c8
here, but not very noticeable, I think, as these ones aren't called by
the addToToc stuff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36347 a592a061-630c-0410-9148-cb99ea01b6c8
plaintext() on the entire inset, even though the tooltip is only going
to show the first few lines. This could make things slow when you had a
lot of branches, because this is called by InsetBranch::addToToc().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36345 a592a061-630c-0410-9148-cb99ea01b6c8
Also, change from using the "cha" prefix for chapters, a la prettyref,
to the "chap" prefix, a la refstyle. We alias \pr@chap to \pr@cha for
prettyref users.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36238 a592a061-630c-0410-9148-cb99ea01b6c8
This is why it was worth doing the updateBuffer() rewrite.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35975 a592a061-630c-0410-9148-cb99ea01b6c8
- only set/unset a caption if necessary.
This fixes the setting of multicols via dialog (part of bug 6985)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35929 a592a061-630c-0410-9148-cb99ea01b6c8
- Functions that inherit from the same baseclass are grouped together with a command;
- Functions that inherit should not have a doxy entry;
- Other functions are also grouped together as much as possible;
- Some function don't need to be implemented if they return the same as the baseclass;
- and more.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35873 a592a061-630c-0410-9148-cb99ea01b6c8
A dynamic_cast is necessary when:
- the object to be casted is from an external library because we can't add Qxxx::asXxxx() to Qt e.g.:
* QAbstractListModel to GuiIdListModel,
* QValidator to PathValidator,
* QWidget to TabWorkArea,
* QWidget to GuiWorkArea;
- the object is to be casted from an interface to the implementing class, because the Interface does not know by whom it is implemented:
* ProgressInterface to GuiProgress,
* Application to GuiApplication.
A dynamic_cast can be replaced by:
- already existing as***Inset() functions, e.g.:
* asHullInset(),
* asInsetMath()->asMacro(),
* asInsetText();
- a static_cast when we are sure this can't go wrong, e.g.:
* we are sure that CellData::inset->clone() is an InsetTableCell,
* in cases where we explicitly check it->lyxCode().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35855 a592a061-630c-0410-9148-cb99ea01b6c8
This also fixes compilation again. I forgot to cherry-pick all commits in git ;)...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35845 a592a061-630c-0410-9148-cb99ea01b6c8
for formatted references. Fixes#2295, in so far as it makes it possible
to translate formatted references.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35623 a592a061-630c-0410-9148-cb99ea01b6c8
to the simple version. We need to do it this way because we should NOT
really require the "Flex" prefix and, in fact, should permit other
prefixes to be used. Next commit for that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35613 a592a061-630c-0410-9148-cb99ea01b6c8
- do not popup invalid path warning with View Source (bug 6904).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35449 a592a061-630c-0410-9148-cb99ea01b6c8
- honor Abdel as author
- reintroduce the /// spacers in the header file because it makes it better readable and we do this in all other inset header files
GuiLine: honor Abdel as author
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35417 a592a061-630c-0410-9148-cb99ea01b6c8
text baseline, not from the middle of the line.
We are now getting much closer to LateX drawing...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35413 a592a061-630c-0410-9148-cb99ea01b6c8
It would be better to get the paragraph language here. How to do that?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35386 a592a061-630c-0410-9148-cb99ea01b6c8
selection and chage tracking state
InsetTabular::drawCellLines: use the above function to draw properly tabular lines after a selection.
This method can be used easily for other insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35268 a592a061-630c-0410-9148-cb99ea01b6c8
* stdcontext.inc:
- basic context menu and tooltip (part of bug #6864)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35229 a592a061-630c-0410-9148-cb99ea01b6c8
-> remove caption frame color from preferences
-> use the collapsible frame color also for caption frames
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35187 a592a061-630c-0410-9148-cb99ea01b6c8
- this line is defined with a width of 1pt -> therefore also draw it in this size in lyx
- this line is by default black -> use black
- setting a color for this in the preferences is wrong and senseless, because the color of this line is defined by the color chosen in the text style dialog -> remove preference color
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35185 a592a061-630c-0410-9148-cb99ea01b6c8
throw away its return value and then go find a pointer to the loaded
child!!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35116 a592a061-630c-0410-9148-cb99ea01b6c8
it->fillWithBibKeys(d->bibinfo_, it);
This could be useful later, if we decide to try to do the work that
fillWithBibKeys did from updateLabels().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35106 a592a061-630c-0410-9148-cb99ea01b6c8
The goal is first to remove explicit testing against ERT_CODE,
and second to allow to define layouts with the same properties as ERT insets.
This commit does not change behaviour
* rename OutputParams::verbatim to pass_thru
* disable encoding switch inside pass_thru layouts
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35091 a592a061-630c-0410-9148-cb99ea01b6c8
- InsetCaption.cpp: margin notes and footnotes are not allowed in captions
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35073 a592a061-630c-0410-9148-cb99ea01b6c8
I'll try to figure out how to get rid of the magic booleans.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35022 a592a061-630c-0410-9148-cb99ea01b6c8
allow this as a fallback. E.g., if we're unable to export as MathML,
then we try to export as an image.
There are several ways, I am sure, in which this implementation is not
ideal.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34993 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
- do not switch the encoding with XeTeX (bug #6766)
- some minor formatting
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34649 a592a061-630c-0410-9148-cb99ea01b6c8
In r33495, "LFUN_TABULAR_FEATURE" was replaced by "LFUN_INSET_MODIFY tabular". However, the status of LFUN_INSET_MODIFY is always enabled while a lot of insets are not allowed to change the number of columns etc.
There we need to disable the "LFUN_INSET_MODIFY tabular" status.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34613 a592a061-630c-0410-9148-cb99ea01b6c8
the OptionalArgs tag does and is implemented by the now misnamed
InsetOptArgs, except that its content gets wrapped in "{}" rather than
"[]". Required arguments do not actually have to be provided, but they
are always output.
This will allow e.g. beamer's Block environment to be implemented
without ERT.
Documentation to follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34591 a592a061-630c-0410-9148-cb99ea01b6c8
Do not clear the mouse_hover state from anywhere else then BufferView, such that the last_inset_ pointer gets nulled. Besides, there is no reason to clear the mouse_hover state on collapsing the Inset.
See also r33908, r34117, r34348, r34353, r34354 and bug #3900.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34364 a592a061-630c-0410-9148-cb99ea01b6c8
- we have to have a copy constructor in InsetCommand to clear the mouse_hover_ map and not to copy it,
- there is no need to have mouse_hover_() in the initialisation list,
- there is no need to copy the auto_open_ map.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34353 a592a061-630c-0410-9148-cb99ea01b6c8
This is also in preparation of a decent fix for bug #3900.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34347 a592a061-630c-0410-9148-cb99ea01b6c8
Inside math toolbars we use "Quadratin". Dunno if this difference is intention.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34336 a592a061-630c-0410-9148-cb99ea01b6c8
At some point we should implement that the tooltips are only shown when they are not completely shown in the outliner. However, this requires extending the QTreeView class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34287 a592a061-630c-0410-9148-cb99ea01b6c8
InsetInfo only returned whether a layout file was available for a class, not whether the LaTeX document class was available.
This might be caused by the maybe misleading name of the "LayoutFileList::haveClass()" function.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34268 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: don't use boost::shared_ptr for msvc10 (could also be extended to several GCC versions)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34259 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: don't use boost::bind for msvc10 (could also be extended to several GCC versions)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34257 a592a061-630c-0410-9148-cb99ea01b6c8
This introduces a new LFUN LFUN_INSET_COPY_AS, which copies a certain Inset to the clipboard. For InsetInfo this is the text that is visible, but this could also replace LFUN_LABEL_COPY_AS_REF, by copying the INSET to the clipboard as a reference, and also a Math inset to copy to the clipboard as latex (including $'s or \[..\]).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34223 a592a061-630c-0410-9148-cb99ea01b6c8
allows for layout- or module-level customization of the display in the
citation dialog and of the XHTML bibliography output.
There is more of this to come, by the way. The next step is to allow
macros. That will make it easier to deal with translation issues, which
ought to be the final step.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33920 a592a061-630c-0410-9148-cb99ea01b6c8
indicates what prefix to use when constructing formatted references.
Documentation to follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33784 a592a061-630c-0410-9148-cb99ea01b6c8
- reintroduce issue that was removed in r33731
(multirow cells are by default left-aligned, LyX does not yet support to change this)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33782 a592a061-630c-0410-9148-cb99ea01b6c8
little things:
- rename method to what it is
- correct parameter
- bit of formatting
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33774 a592a061-630c-0410-9148-cb99ea01b6c8
Do not warn that a label already exists if it is in a deleted part of the document.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33714 a592a061-630c-0410-9148-cb99ea01b6c8
The asymmetry between how "Branch" is read and written still needs to be
addressed, as does the fact that InsetBranchParams ought to be created
with a param string.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33706 a592a061-630c-0410-9148-cb99ea01b6c8
This patch introduces a "ListCommand" tag for Float layout. This tag
defines the command used to generate a list of such floats, in the cases
where float.sty is not used (i.e., where NeedsFloatPkg is true). We were
previously hardcoding the commands \listoftables and \listoffigures. But
in other cases, such as achemso.layout, which defines lists of schemes,
charts, etc, we could not output such lists.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33633 a592a061-630c-0410-9148-cb99ea01b6c8
of them. This is preparatory for introducing a layout tag that lets us
customize that command for builtin floats.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33631 a592a061-630c-0410-9148-cb99ea01b6c8
list revealed that the former is confusing to people. The latter
indicates more clearly what the tag does.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33626 a592a061-630c-0410-9148-cb99ea01b6c8
- multirow cells are always left aligned, therefore disable horizontal alignment
- multirows cannot be vertically aligned, therefore disallow this
(Two issues less in http://wiki.lyx.org/Devel/Multirow .)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33622 a592a061-630c-0410-9148-cb99ea01b6c8
- a multirow cannot be a multicolumn the same time
- a multirow cannot be the caption of a longtable
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33614 a592a061-630c-0410-9148-cb99ea01b6c8
- proper message passing for all tabular features
- properly define which feature needs an argument
* replace LFUN_TABULAR_FEATURE with LFUN_INSET_MODIFY
- The math tables are also affected. In the future a common base class
between math and text table will solve this inconsistency.
- There is a hack in GuiApplication in order to not rename the toolbar
icons. This will have to be cleaned up with a general icon naming for
LFUN_INSET_MODIFY... to be discussed.
* Tabular Dialog:
- big cleanup, lots and lots of bug fixing here
- migrated to InsetParamsWidget
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33495 a592a061-630c-0410-9148-cb99ea01b6c8
* update the button label when a parameter is changed.
* Get rid of unused LFUN_INSET_DIALOG_UPDATE dispatch.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33486 a592a061-630c-0410-9148-cb99ea01b6c8
- remove things from the todo list that we already support
- add authors
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33417 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change (lyx2lyx code follows the next days)
- the patch is a joint work of Edwin and me
The patch is huge but the major parts work already. I put it in now as the minor known issues can be solved step by step the next days. I think this is the best solution because collaborating with such large patches already lead to copy/paste bugs.
The known issues are listed here:
http://wiki.lyx.org/Devel/Multirow
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33414 a592a061-630c-0410-9148-cb99ea01b6c8
- now accept a full parameter string at construction
- LFUN_INSET_MODIFY now also interprets float type.
* FloatPlacement:
- The float type label is replace with a combo that can be used to
change the type.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33412 a592a061-630c-0410-9148-cb99ea01b6c8
You cannot use params.type for that, because that's not flagged for
translation. Have a look at InsetCollapsable::floatName().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33411 a592a061-630c-0410-9148-cb99ea01b6c8
a lot of simplification is possible. Except some instability period...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33389 a592a061-630c-0410-9148-cb99ea01b6c8
* Bug fix and clean up InsetFloat parameter handling: this is still not very clean as the float type is not really a parameter still... The solution is to defer the float type reading to the actual inset reading, not its creation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33370 a592a061-630c-0410-9148-cb99ea01b6c8
This fixes bug #1560.
The diverse setBuffer / updateLabels calls need auditing. See FIXMEs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33249 a592a061-630c-0410-9148-cb99ea01b6c8
The idea here is to implement something like \refstepcounter for LyX. We
do this by tracking the "active" counter in Counters.cpp. We also have
to track when we go in and out of environments to which counters are
local, and so on and so forth.
This all gets done in updateLabels(), but only if we are producing
output, which is why I added the output boolean a while ago.
I expect there are bugs in here, though it seems to work pretty well
with the documents I've tested.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33108 a592a061-630c-0410-9148-cb99ea01b6c8
AMS Math 1, 2, 3
where the numbers are links.
The only thing left to do here is to parse the index entries so that we
can do something with "this ! that" and similar things.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33001 a592a061-630c-0410-9148-cb99ea01b6c8
other day that this would be easy, since the Index is in the TOC. There
is more to be done here still, though.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33000 a592a061-630c-0410-9148-cb99ea01b6c8
- indicate if a child document has been un-included (via the includeonly feature).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32941 a592a061-630c-0410-9148-cb99ea01b6c8
#6415
Enrico please verify that reverse dvi is fixed.
* Text and InsetText: create two private constructors and transfer some
initialisation code from InsetText.
* Paragraph: id generation is transfered to Text. May be transfered to
Buffer in the future, we'll see.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32766 a592a061-630c-0410-9148-cb99ea01b6c8
Thanks to Abdel for making this so easy. I'm just stealing the TOCs on
the sidebar.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32734 a592a061-630c-0410-9148-cb99ea01b6c8
InsetLayout, per Jurgen's suggestion, so that insets can be told to
display an abbreviated form of their content when closed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32575 a592a061-630c-0410-9148-cb99ea01b6c8
For a displayed equation, the height is artificially increased by a displayMargin() in InsetMathHull::metrics if it is a displayed equation and there is a preview.
This extra height is not covered by the preview image and what one can see is the background as drawn by the MathHull inset. The color of this background should be either Color_mathbg or Color_background depending on whether the preview is shown or not.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32560 a592a061-630c-0410-9148-cb99ea01b6c8
Refresh the file info, otherwise InsetGraphics::latex might still think that the file does not exist.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32355 a592a061-630c-0410-9148-cb99ea01b6c8
as to allow us to call the routine when we are preparing for output and
so to do certain things we might not want to do every time.
This is an abuse of updateLabels(), in a way, but updateLabels() long
ago became the general recurse-through-the-Buffer routine, and to
implement the sort of thing I want to do here in validate(), say, much
of the code in updateLabels()---in particular, the counter-update
code---would have to be duplicated. So I believe this is the best, and
easiest, way to go.
Actual use of the new argument will follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32318 a592a061-630c-0410-9148-cb99ea01b6c8
borrow the LatexFeatures::addPremableSnippet() method to do it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32301 a592a061-630c-0410-9148-cb99ea01b6c8
To make this really good, we'd want to be able to rotate, crop, etc, the
images, as well as convert them to suitable output formats. This should
not be too difficult, since we do this sort of thing for display,
anyway. But I don't myself know how to do it. Anyone?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32295 a592a061-630c-0410-9148-cb99ea01b6c8
other fixes in here, too.
There is an issue here which I guess I'll deal with later, namely, that
the name attribute for <a> is unavailable in XHTML 1.1, which is what we
need for MathML support, at least in Firefox. Firefox will deal with it
if it's there, but the document won't validate. I'll figure out what to
do about this later.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32226 a592a061-630c-0410-9148-cb99ea01b6c8
I guess that this should be "inline", that is, appear where it appears
in the LyX file, as opposed to being deferred until after the current
paragraph is output. But I'm not sure about this. If anyone has a view,
let me know.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32215 a592a061-630c-0410-9148-cb99ea01b6c8
with InsetVSpace. Typically, this will appear on a line by itself, and
we do not really want <div><br /></div>.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32205 a592a061-630c-0410-9148-cb99ea01b6c8
derived class and then will not want to write it again here. So this
gives us that ability.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32132 a592a061-630c-0410-9148-cb99ea01b6c8
Much of the point of this is to allow us properly to handle what LyX does as:
<em>This is <strong>bold and italic</em> and now just bold.</strong>
We output:
<em>This is <strong>bold and italic</strong></em><strong> and now just bold.</strong>
which is valid.
Note how much easier this would have been if emphasis and boldness were insets
rather than ranges. ;-)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32086 a592a061-630c-0410-9148-cb99ea01b6c8
a piece at a time, using the new XHTMLStream.
This just gets the basic structures working, and fixes a bunch of iconv
errors in the process.
I hate iconv errors.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32085 a592a061-630c-0410-9148-cb99ea01b6c8
use the label name as associated text, and put it into square brackets. It'd be
nice to be able to do more, but for that we'd need to associate counters with
the labels, which would be nice for display, too. But we don't have that yet.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31976 a592a061-630c-0410-9148-cb99ea01b6c8
At present, we do not do any sort of rotating, scaling, cropping, etc.
That should not be terribly hard to do, since we can just call ImageMagick
and get it to do it for us, but appropriate routines will have to be
written.
I'd be thrilled if someone else wanted to do that. ;-)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31975 a592a061-630c-0410-9148-cb99ea01b6c8
Buffer should not be set when cloning. If there is bug that was fixed by this line of code it should be fixed later by setting the Buffer after the cloning.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31900 a592a061-630c-0410-9148-cb99ea01b6c8
Math manual loads and save correctly it seems but expect some instability period.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31898 a592a061-630c-0410-9148-cb99ea01b6c8
I forgot that inset-begin jumps out of the Inset if the cursor is already at the begin.
see r31823.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31839 a592a061-630c-0410-9148-cb99ea01b6c8
This removes the caption-inset, which is made possible by the clean-up of the LFUN_INSET_DISSOLVE (see r31822 and r31756). This assumes that there is nothing else in the row than the caption inset. I think that should be the case, but this is not yet guaranteed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31823 a592a061-630c-0410-9148-cb99ea01b6c8
- change cur.inset().nargs() to nargs() as we might actually be in the inset called nextInset(),
- set the enabling flag of the status struct, don't return this value,
- return whether we handled this request.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31822 a592a061-630c-0410-9148-cb99ea01b6c8
aren't the same thing, so we won't be generating default CSS for those.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31778 a592a061-630c-0410-9148-cb99ea01b6c8
to FontInfo.*
This allows tex2lyx to use the plain FontInfo object (via Layout), and to remove
several '#ifdef TEX2LYX' in the code
Reorder a bit the makefile in tex2lyx
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31772 a592a061-630c-0410-9148-cb99ea01b6c8
- put the InsetFlex specific part into InsetFlex,
- honor the argument given to the LFUN also for normal Insets as the description already stated,
- fix bug #6285: context menu action goes to the wrong inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31756 a592a061-630c-0410-9148-cb99ea01b6c8
can't just output Standard as <p>, or anything else, because we
have structures like:
this is text <branch>and more text</branch> and more
which would then come out as:
<p>this is text <p>and more text</p> and more</p>
So we use the OutputParam html_in_par to try to signal when we
are already in a paragraph. It is expected that we will need to
do some bug fixing here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31753 a592a061-630c-0410-9148-cb99ea01b6c8
* GuiExternal.cpp:
- do not crash if the list of external templates is empty (bug #3974).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31569 a592a061-630c-0410-9148-cb99ea01b6c8
* OutputParams.{cpp,h}:
- new param inIndexEntry
* InsetIndex.cpp (latex):
- set param.
* InsetErt.cpp (plainText):
- output active chars in IndexInsets
* lib/lyx2lyx/lyx_1_6.py:
- embrace "|" in ERT when converting old index entries to collapsables.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31360 a592a061-630c-0410-9148-cb99ea01b6c8
This is wrong and should have been reverted long ago and since r31340 it even doesn't have any function because addToToc isn't called for an internal buffer anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31355 a592a061-630c-0410-9148-cb99ea01b6c8
When setLayout() disappeared, also the call to setButtonLabel() disappeared. Now, when changing a Note into a Comment, the button label is no longer updated. This is because labelstring_ is not empty, so the line:
return labelstring_.empty() ? getLayout().labelstring() : labelstring_;
introduced in r30570 has no effect.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31225 a592a061-630c-0410-9148-cb99ea01b6c8
We have to determine whether we are in an empty cell before we dispatch the lfun to the inset. Otherwise we determine whether the math is empty and if so, we then go to the next cell in the math inset. This cell doesn't exist probably.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31121 a592a061-630c-0410-9148-cb99ea01b6c8
I also updated InsetMathMBox so that it remains compilable, even if not used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30940 a592a061-630c-0410-9148-cb99ea01b6c8
The lfuns, LFUN_FLOAT_INSERT and LFUN_WRAP_INSERT are now only enabled when they should be.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30740 a592a061-630c-0410-9148-cb99ea01b6c8
accepting changes in a clipboard copy (CutAndPaste.cpp), we set the buffer
of insets (and we reset them later).
Doing this makes sense because we know this is the only operation on these
out-of-document paragraphs that will require access to a buffer.
Also, this commit gets rid of one explicit test against ERT_CODE and
LISTING_CODE.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30623 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, insets in cut stack do not have a buffer, and therefore cannot
acess to buffer parameters. What is annoying here is that acceptChanges
requires this buffer params only to be able to read a font in moveItem,
in order to read the buffer language, and I doubt this is really needed...
Another change in this patch is that Inset::getLayout now returns a
plainLayout when the inset does not have a buffer_. This fixes a remaining
crash where dEPM reads isFreeSpacing() for an inset in the clipboard, but
this looks like a fragile situation. And it will not do the right thing when
doing depm in a freespacing inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30605 a592a061-630c-0410-9148-cb99ea01b6c8
* rename InsetLayout::isForceLtr to forceLTR
* move InsetCollapsable::xhtml to InsetText
* move InsetCollapsable::tocString to InsetText.
* move forcePlainLayout and allowParagraphCustomization from IC to IT
* use isPassThru instead of forceLTR in places where it seems to make
sense (was introduced in r21285)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30591 a592a061-630c-0410-9148-cb99ea01b6c8
is commented out, so that the documentclass is queried every time instead of
using the layout_ cache. For now I have kept the setLayout calls, but they are
inoperant.
Other changes:
* remove non-const usePlainLayout methods
* move InsetCollapsable::allowSpellCheck and allowMultiPar to InsetText
* move InsetCollapsable::isFreespacing and forceLTR to Inset
Freespacing support could be moved to insettext, but I have to check who
uses it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30549 a592a061-630c-0410-9148-cb99ea01b6c8
Add an assertion in Inset::dispatch that checks that buffer() == *cur.buffer()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30540 a592a061-630c-0410-9148-cb99ea01b6c8
Get rid of Inset::getLayout(BufferParams), since all insets have access to
their own buffer. Inset::getLayout() does the same now.
Get rid of InsetCollapsable::getLayout(BufferParams) too, and remove most references to InsetCollapsable::layout_. For now IC::getLayout() still returns layout_, but the idea is to change this (provided there is no performance problem).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30530 a592a061-630c-0410-9148-cb99ea01b6c8
introduces a new LFUN and fixes#4620
This can in principle also go to branch when new LFUNs are there allowed, Jürgen?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30523 a592a061-630c-0410-9148-cb99ea01b6c8
* Counters.cpp (flatLabelString): return a cache of the flattened strings for each used language
* Counters.cpp (theCounter, counterLabel, flattenLabelString): add a lang parameter; in theCounter, populate the cache as needed.
* insets/InsetCaption.cpp:
* insets/InsetFoot.cpp:
* insets/InsetBibitem.cpp:
* insets/InsetCollapsable.cpp:
* Paragraph.cpp:
* Buffer.cpp: pass a language argument to counter methods.
* Paragraph.cpp (translateIfPossible): use the function with same name in gettext.cpp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30520 a592a061-630c-0410-9148-cb99ea01b6c8
- InsetTabular.cpp: write the alignment as last features (to match the existing tex2lyx routines)
- InsetTabular.h: fix indexes
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30482 a592a061-630c-0410-9148-cb99ea01b6c8
- longtables cannot have a valignment, tables not a longtablealignment
- squash a compiler warning
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30478 a592a061-630c-0410-9148-cb99ea01b6c8
- GUI support for table alignment
(all comments to the polished layout of the table dialog welcome)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30477 a592a061-630c-0410-9148-cb99ea01b6c8
has no info about that branch.
Context menu still does not work.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30457 a592a061-630c-0410-9148-cb99ea01b6c8
* on paste, ask if unknown branches shall be added to the branch list
(entails new LFUN_BRANCH_ADD)
* add a list of undefined branches to the buffer and the GUI
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30419 a592a061-630c-0410-9148-cb99ea01b6c8
6047: Lyx 1.6.3 unable to typeset the third chemical equation of the
file mhchem.lyx (package mhchem)
4043: mhchem support
5394: support for the mhchems's \ce command
The \ce and \cf insets are text mode environments that allow entering
spaces and mathmode commands. LyX leaves them alone and doesn't try to
be smart, i.e., the behaviour is exactly the same we had in the old days
with text-in-math mode environments, before the introduction of the
\ensuremath and \lyxmathsym macros. This means that in those environments
one has to know what he is doing, as LyX will not offer any protection.
The hack of enclosing \ce and \cf in a \text{} environment in order to
be able to enter spaces is no longer necessary.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30338 a592a061-630c-0410-9148-cb99ea01b6c8
Note that we will sometimes use the "caption trick", still in
listings, for example.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30194 a592a061-630c-0410-9148-cb99ea01b6c8
Here's the deal:
* With verbatim, we include it verbatim. This would allow the inclusion of
other HTML files.
* With listings, we include it verbatim, wrapped in <pre>.
* With Input and Include, we check if it's a LyX file. If not, we don't do
anything, since we don't know how to include (say) a TeX file in the HTML
output. (Wanna call tex4ht, anyone?) If it is a LyX file, we let it write
itself as HTML, and include it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30191 a592a061-630c-0410-9148-cb99ea01b6c8
NOTE: Again, I'm not increasing the layout format, though I have added
a couple new things here. If anyone thinks I really do need to do that,
then I will. But I don't think it's necessary, as no-one ought to be using
this.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30178 a592a061-630c-0410-9148-cb99ea01b6c8
As said in the comment, someone who knows what these are supposed
to do should have a look, please. It may be very easy to get these
to work, but I don't know.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30164 a592a061-630c-0410-9148-cb99ea01b6c8
routines, one that allows us to "defer" certain material, e.g., a float
that ought to appear in a div but can't simply be put into the middle
of a paragraph.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30079 a592a061-630c-0410-9148-cb99ea01b6c8
see the notes---but it does work reasonably well. And it will work a lot
better when an unrelated patch of mine goes in: one that generally improves
the display of BibTeX-derived information.
Note how we use the TOC here, which has already gathered the information we
need. This can also be done for other things.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30056 a592a061-630c-0410-9148-cb99ea01b6c8
have been wanting to change it for a while. It is not very useful to have
a bunch of years listed in the citations TOC (which you get if you have used
\citeyear very often. Better, it seems to me, to see the citation keys.
Of course, this can be switched again if need be, and I can figure out a
different way to handle my own problem.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30053 a592a061-630c-0410-9148-cb99ea01b6c8
The CSS for lists isn't quite right, but I'm not sure what to do.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29984 a592a061-630c-0410-9148-cb99ea01b6c8
footnote output and allows a lot more flexibility. (In some ways, this now
seems to be more like what docbook does.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29981 a592a061-630c-0410-9148-cb99ea01b6c8
bring it into line with the handing of Layout's preamble and requires. This
will make information about used InsetLayout's avaiable elsewhere.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29914 a592a061-630c-0410-9148-cb99ea01b6c8
No automatic width calculation is done for old documents, because these might rely on settings in
nomencl.cfg.
A GUI to alter this is needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29775 a592a061-630c-0410-9148-cb99ea01b6c8
- allow again to set allocate multiple header attributes to a row,
since this is valid (fix bug 5950).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29721 a592a061-630c-0410-9148-cb99ea01b6c8
- reset paragraph fonts also after LFUN_SELECTION_PASTE.
This assures lang is set to latex in ERTs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29690 a592a061-630c-0410-9148-cb99ea01b6c8
New method wrapParas() in support, deployed in various
insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29564 a592a061-630c-0410-9148-cb99ea01b6c8
* Remove the EDITABLE enum,
* add functions hasSettings() for all insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29375 a592a061-630c-0410-9148-cb99ea01b6c8
Since Qt does not provide this, we have to roll our own dialog.
Hidden warnings are stored in sessions.
The dialog is currently only used in the case where an included file
has a different textclass then the master (bug 3218).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29324 a592a061-630c-0410-9148-cb99ea01b6c8
