* Buffer: new changed() boost::signal.
* LyXView:
- redrawWorkArea(): deleted
- bufferChangedConnection_: new signal connection
* LyXFunc: replace LyXView::redrawWorkArea() direct call with Buffer::changed() signal emission.
* WorkArea.C: deleted some comments about redrawWorkArea.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15464 a592a061-630c-0410-9148-cb99ea01b6c8
seems. ChangeTracking responsible please verify all
erase/eraseChar where we added false or where it is
called without changetracking bool (jug).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15456 a592a061-630c-0410-9148-cb99ea01b6c8
- Do not use the nullpainter for the rows outside the screen, because the nullpainter does not calculate the width of text, and thus the metric entries in the inset cache are completely wrong, causing assertions when using for instance page up or page down into an inset. This fixes the dreading assertion on navigation in the user guide, and elsewhere
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15455 a592a061-630c-0410-9148-cb99ea01b6c8
* src/changes.h: pass Change and Range to ChangeRange constructor
* src/changes.C: adjust
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15448 a592a061-630c-0410-9148-cb99ea01b6c8
- Add debugging input
- If cursor::dispatch does not handle the func, then it should not request an update
- Dump metrics cache after redraw
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15443 a592a061-630c-0410-9148-cb99ea01b6c8
* paragraph.h: remove setChar(...); all text changes
must be expressed as erase and insert operations in
order to support change tracking
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15440 a592a061-630c-0410-9148-cb99ea01b6c8
I believe that it is for horizontal
"scrolling": If you have a table that is wider than the screen and you go
to a cell that is at the right edge then, if you are lucky, the table is
shifted to the left so that you can edit the cell and even go further
right. This does however not work reliably.
If I am right then the variable name scx_ would make some sense: sc for
scrolling. The ChangeLog comments also seem to point in this direction. And
most of them were done by Jürgen Vigna who is AFAIK in Denmark.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15414 a592a061-630c-0410-9148-cb99ea01b6c8
src/text2.C: invoke insertInset with correct
Change parameter; only check for change _type_
(DELETED) for DEPM purposes
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15406 a592a061-630c-0410-9148-cb99ea01b6c8
* src/rowpainter.C: check for change type equality, not
for equality of the compete Change objects
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15404 a592a061-630c-0410-9148-cb99ea01b6c8
* src/bufferparams.C: output authors no matter whether
we are in CT mode or not
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15402 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/MathParser.C
(parse1): behave correctly when a wrong delimiter is specified.
* src/mathed/InsetMathBig.C
(write): don't write a space before delimiter.
* src/frontends/qt4/QDelimiterDialog.C
(QDelimiterDialog): make translatable the string "Variable size".
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15397 a592a061-630c-0410-9148-cb99ea01b6c8
- Move lyx_server_ and lyx_socket destruction out of prepareExit() because those are only available when lyx::use_gui is true.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15394 a592a061-630c-0410-9148-cb99ea01b6c8
- Fix LaTeX export of User guide (the utf8 conversion buffer was too small)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15390 a592a061-630c-0410-9148-cb99ea01b6c8
* insettext.[Ch]
(InsetText::covers): added to allow the click-sensitive area to grow
with the Wide() condition.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15384 a592a061-630c-0410-9148-cb99ea01b6c8
getCommand does not include the {} anymore, because \hfill has no arguments.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15379 a592a061-630c-0410-9148-cb99ea01b6c8
Known problems:
- No space is output after a \hfill. I probably broke this with the
InsetCommand patch. I'll have a look later.
- Although the encoding is now UTF8 the arguments of the inputenc package
are still the old ones, so LaTeX will not run.
- Labels and references with non-ASCII characters are broken. This needs to
be fixed in lyx::support::escape(), but this is a file format change.
- Something seems to be wrong with index entries, but this is probably also
due to the InsetCommand changes.
Have fun!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15378 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView::updateMetrics(): add a big FIXME and don't clear out the coord_cache_.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15375 a592a061-630c-0410-9148-cb99ea01b6c8
- Polish the behavior when the TOC is empty (clearing the button and the TOC tree)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15373 a592a061-630c-0410-9148-cb99ea01b6c8
Now, lyx is really ready for multiple LyXView. Just need to create an LFUN for it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15370 a592a061-630c-0410-9148-cb99ea01b6c8
This commit also modifies the LyXFunc class. A LyXView is not needed any more at construction. Neither is the top level keymap. The LyXFunc key sequences are initialized only if we are in GUI mode (lyx::use_gui = true).
The next step is to rename LyXFunc::owner to LyXFunc::lyx_view_ and to put some BOOST_ASSERT. A classification between Gui and Kernel oriented LFUNs would also be welcome.
*LyX/lyx_main.[Ch]:
- LyX::Singletons: new private structure containing all the singletons (except the main LyX one of course).
- buffer_list_, top_level_keymap, session_: transfered to the LyX::Singletons structure.
* LyXFunc:
- LyXFunc: default constructor does not need any arguments.
- setupLocalKeymap(): deleted (was not used anywhere).
- initKeySequences(): new public method called from lyx_main.C, useful only in lyx::use_gui mode.
- new private member accessor methods
* Application:
- Application_pimpl: deleted (transfered to LyX)
- global singleton accessors: transfered to lyx_main.C
- start(): code transfered to LyX::priv_exec()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15367 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): ditto
* src/text3.C
(LyXText::dispatch): ditto
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
* development/FORMAT: document new format
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
CoordCache & coord_cache = sl.text()->bv()->coordCache();
As you can see, I used this indirection to access the BufferView::CoordCache(). Bad luck, the passed CursorSlice was not completely valid inside a mathed inset, hence the crash. My solution is to pass BufferView to InsetBase::cursorPos() and all its derivative.
* InsetBase::cursorPos(): pass BufferView const &
* bufferview_funcs::coordOffset(): ditto.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15356 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt3/QDocumentDialog.C (updateNumbering): don't include headings
that have no counter in their label.
* src/frontends/qt3/ui/NumberingModuleBase.ui: show scrollbar when appropriate.
* src/frontends/qt4/QDocumentDialog.C (updateNumbering): don't include headings
that have no counter in their label.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15352 a592a061-630c-0410-9148-cb99ea01b6c8
The coordcahce is for up/down navigation and vconverting mouseclicks to text positions. It is not for pure display/export which
is what drawT is about. It was a simple oversight not to remove it after some copying from the 'real' draw() method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15347 a592a061-630c-0410-9148-cb99ea01b6c8
* QToc::update(): return early if no TOC type.
* QTocDialog::updateGui(): return early of the Type model is empty and disable the outline buttons.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15346 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer:
file format incrementation to 251
* src/insets/insetcharstyle.[Ch]:
- make show_label a param and save its state
- let all-insets-toggle togle the label in charstyles
* development/FORMAT:
document file format change
* lib/lyx2lyx/LyX.py:
add new file format
* lib/lyx2lyx/lyx_1_5.py:
remove char style label param on reversion to 250.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15345 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.h: define "extern bool lyx::use_gui" here.
* NoGuiFontMetrics.h: new class for command-line LyX
* NoGuiFontLoader.h: new class for command-line LyX
* Application.C:
- theFontMetrics(): returns the above dummy FontMetrics when use_gui is false.
- theFontLoader(): returns the above dummy FontLoader when use_gui is false.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15339 a592a061-630c-0410-9148-cb99ea01b6c8
(readInset): Add comment about citation commands
* src/tex2lyx/text.C
(known_jurabib_commands): remove fullcite since LyX does not know it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15335 a592a061-630c-0410-9148-cb99ea01b6c8
* MathFactory.C:
- initMath(): revert change from r15327 because initSymbols() is needed for proper math parsing.
- math_font_available(): return false if lyx::use_gui is false.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15331 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.C:
- parse_export(): set lyx::use_gui to false.
* MathFactory.C:
- initMath(): initSymbols() only if lyx::use_gui is true.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15327 a592a061-630c-0410-9148-cb99ea01b6c8
theCoords is now a thing of the past and all CoordCache accesses are done via BufferView::coordCache() now. I had to modify a number of methods to pass BufferView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15324 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/GuiApplication.C
(lyx::frontend::Application * createApplication): Don't return the
address of a temporary, but use the new operator.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15313 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXFunc: new setLyXView() method
* LyXView::dispatch(): call LyXFunc::setLyXView() before lyx::dispatch()
What remains to be done is to ensure that every call to lyx::dispatch that is LyXView dependant is replaced with LyXView::dispatch().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15308 a592a061-630c-0410-9148-cb99ea01b6c8
Only qt4 is guaranted to compile and work. I did not remove gtk and qt3 lyx_gui.C because they might be needed for reference to complete the header declarations in "GuiApplication.C".
- lyx_gui::use_gui transfered to lyx::use_gui in lyx_main.C
- all remaining lyx_gui functions transfered to Application and corresponding GuiApplication implementations.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15306 a592a061-630c-0410-9148-cb99ea01b6c8
- new buffer_list_ member and accessors
- implementation of theBufferList() extern function
* Application: remove everything related to BufferList
* lyx_cb.C: test for lyx::use_gui before using theApp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15303 a592a061-630c-0410-9148-cb99ea01b6c8
export (e.g. the ToC) and the navigate menu.
* src/insets/insetbase.h
(InsetBase::plaintext): output to a docstream
(InsetBase::textString): ditto
* src/mathed/TextPainter.h
(TextPainter::show): ditto
* src/support/docstream.[Ch] New file and string streams for
docstring. The file streams convert to UTF8 on the fly.
* many more files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15301 a592a061-630c-0410-9148-cb99ea01b6c8
Please don't forget to clean up includes and using directives.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15300 a592a061-630c-0410-9148-cb99ea01b6c8
* lyxfunc.h:
- theLyXFunc(): new function in the global namespace.
- lyx::dispatch(): new function in the lyx namespace.
- lyx::getStatus(): new function in the lyx namespace.
* bufferlist.h:
- theBufferList(): new function in the global namespace.
* Clipboard.h:
- theClipboard(): new function in the global namespace.
* Selection.h:
- theSelection(): new function in the global namespace.
* FontLoader.h:
- theFontLoader(): new function in the global namespace.
* FontMetrics.h:
- theFontMetrics(LyXFont const &): new function in the global namespace.
* Application.C: implements the functions defined above.
* LyXView.h:
- getLyXFunc(): deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15298 a592a061-630c-0410-9148-cb99ea01b6c8
- text(): now returns drawn text width()
* rowpainter:
- paintChars(): use the returned width from Painter::text() instead of recalculating it.
All other files: implement the API change. qt3 and gtk not 100% guaranted to compile nor work.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15294 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer.[Ch] (changeRefsIfUnique): extend to handle bibitems
as well (the function takes a InsetCode argument now);
clean up by using InsetIterator.
* InsetMathHull.C (doDispatch): changeRefsIfUnique needs a
InsetCode argument now (bug 2744).
* insetlabel (doDispatch): changeRefsIfUnique needs a
InsetCode argument now.
* insetbibitem (doDispatch): use changeRefsIfUnique
(actual fix for bug 2744).
* insetcommand.[Ch]:
* insetcite.[Ch]: implement replaceContents, which is
used by changeRefsIfUnique.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15289 a592a061-630c-0410-9148-cb99ea01b6c8
* controllers/Dialog.[Ch]
- View::title_ is now a docstring (ctor and access functions changed)
* controllers/ControlLog.[Ch]
- title() now returns a docstring
* controllers/ControlLog.[Ch]
- title() now returns a docstring
* qt4/*: adapted to above changes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15283 a592a061-630c-0410-9148-cb99ea01b6c8
* lstrings.[Ch]: new docstring trim() function
* qt4/validators.C: PathValidator::validate() and printable_list() converted to unicode.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15281 a592a061-630c-0410-9148-cb99ea01b6c8
- getChangeAuthor() and getChangeDate(): converted to unicode.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15279 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/unicode.C
(iconv_convert): Use boost::uint32_t for storing a buffer character,
since the previously stored unsigned char is too small. I did not
use lyx::char_type on purpose because that might not be interpreted
as number, but as wide character if lyx::char_type == wchar_t.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15278 a592a061-630c-0410-9148-cb99ea01b6c8
- ucs4_to_qchar() and qchar_to_ucs4() have been inlined.
- ucs4_to_qstring(): pass a QString to avoid a copy.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15266 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, I replaced all methods in the font_metrics namespace by a proper virtual interface FontMetrics. The FontLoader is _the_ container for FontMetrics.
This patch should also bring some optimizations in a number of place in the code. This is because we do not need any more to search for the LyXFont at each font_metrics call. In effect, the speed advantage is not as sensible and this is a bit deceiving considering that this was my primary motivation behind the patch. But I like the patch anyway as it cleans up the relation and interfacing between fonts, metrics and frontends.
* frontends/FontMetrics.h: new virtual interface. Renamed from font_metrics.h
* qt4/GuiFontMetrics: corresponding qt4 implememtation. Renamed from qfont_metrics.C. The smallCaps particular case treatment has been transfered here as well as the width cache for MacOSX and Windows.
* qt4/QLPainter.C: the smallCapsText has been reworked to return the width of the drawn text.C
all other files: replace font_metric helper function call with corresponding FontMetrics method calls.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15265 a592a061-630c-0410-9148-cb99ea01b6c8
* rename output_changes to outputChanges
* rename tracking_changes to trackChanges
* add FIXMEs for later revision
* remove trackChanges(); the CT data structure will always be set up
* decouple LFUNs changes-output/change-accept/change-reject/
all-changes-accept/all-changes-reject from LFUN changes-track
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15261 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/ui/stdmenus.ui: move math text styles from
menu "insert" to menu "edit"
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15246 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/InsetMathSplit.C
(InsetMathSplit::validate): Only require amsmath for AMS stuff
* src/mathed/MathFactory.C
(createInsetMath): create InsetMathSplit if the latexkey is "split"
* src/mathed/MathParser.C
(Parser::parse1): remove "gathered" and "aligned", since these are
now handled via lib/symbols
(Parser::parse1): create InsetMathSplit if the latexkey is "split"
* lib/symbols: Add aligned, gathered, lgathered and rgathered
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15224 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/FontLoader.h: new interface class.
* frontends/Application.h: new FontLoader() pure virtual method
* frontends/lyx_gui: update_fonts() and font_available() methods deleted
* [qt3/qt4/gtk]/GuiApplication: implement the new interface
* qt4/GuiFontLoader:
- renamed from FontLoader
- now derives from FontLoader
- now in the lyx::frontend namespace
* qt3/qfont_loader
- now derives from FontLoader
* gtk/xftFontLoader
- now derives from FontLoader
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15220 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.C and lyx_cb.C: use Application methods directly instead of the above functions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15211 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/fontutils.C:
Undefine the min and max macros if they are defined
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15210 a592a061-630c-0410-9148-cb99ea01b6c8
virtual std::string const romanFontName() = 0;
virtual std::string const sansFontName() = 0;
virtual std::string const typewriterFontName() = 0;
My goal is to transfer all of "frontends/*/lyx_gui.C" to "frontends/lyx_gui.C". When this is done, "frontends/lyx_gui.C" can go altogether as its functions will then be replaced with direct calls to theApp->XXX().
* frontends/lyx_gui.C: new file with code transfered from [qt3,qt4,gtk]/lyx_gui.C
* frontends/Application: 3 new font related pure virtual methods
* [qt3,qt4,gtk]/GuiApplication: implement the above method with code transfered from lyx_gui.C
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15208 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetgraphics.C
(findTargetFormat): return pdf for vector graphics
* src/format.h
(Flags): new enum describing format flags
(flags_): new member variable for format flags
(vectorFormat): new, tell whether a format can contain vector graphics
* src/format.C: adjust to flags changes
* src/frontends/qt[34]/QPrefsDialog.C
(QPrefsDialog::QPrefsDialog): handle new vector flag
(QPrefsDialog::switch_format): ditto
(QPrefsDialog::updateFormatsButtons): ditto
(QPrefsDialog::new_format): ditto
(QPrefsDialog::modify_format): ditto
* src/frontends/qt3/ui/QPrefFileformatsModule.ui
* src/frontends/qt4/ui/QPrefFileformatsUi.ui
(vectorCB): new checkbox for vector flag
* src/lyxrc.C
(LyXRC::read): read vector flag
(LyXRC::write): write vector flag
* lib/doc/Customization.lyx: document format flags
* lib/configure.py
(checkFormatEntries): Add vector flag to some formats
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15205 a592a061-630c-0410-9148-cb99ea01b6c8
Now we write again \begin{align} instead of \begin{4} to .lyx and .tex.
* src/mathed/InsetMathHull.C
(InsetMathHull::header_write): write type name, not type_.
Use switch instead of if for better readability.
(InsetMathHull::footer_write): ditto
(InsetMathHull::mutate): write type name, not type_
(InsetMathHull::normalize): ditto
(InsetMathHull::infoize): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15204 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/fontutils.C:
Undefine the min and max macros after inclusion of windows.h on cygwin.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15203 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiView.C
(setGeometry): replace test for Q_OS_WIN32 with Q_WS_WIN
* src/support/fontutils.C:
If X_DISPLAY_MISSING is defined, compile the code for Win32
on cygwin, too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15201 a592a061-630c-0410-9148-cb99ea01b6c8
A trivial (looking) patch to correct inset behavior, which is broken
with revision 15068. Without this patch, it is not possible to modify
an existing inset. All modifications processed as new index. (see
lyxfunc.C:1420)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15199 a592a061-630c-0410-9148-cb99ea01b6c8
These font related functions were identical for qt3 and qt4. They are not Qt dependent at all and could also apply to an eventual Win32 or MacOSX gtk port.
Jen-Marc says: It would be nice to convince fontconfig to do the same for linux.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15196 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): move code for ref insert to InsetMathNest
(InsetMathHull::getStatus): move code for ref insert to InsetMathNest
* src/mathed/InsetMathNest.C
(InsetMathNest::doDispatch): move code from InsetMathHull here
(InsetMathNest::getStatus): move code from InsetMathHull here
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15189 a592a061-630c-0410-9148-cb99ea01b6c8
* gtk/qt3/qt4/GuiApplication: createView() method deleted
* LyXView:
- init(): is now a pure virtual method. autoSave code transferred to constructor and updates to the frontends.
- setGeometry(): new pure virtual method
* gtk/GView, qt3/QtView, qt4/GuiView: adapted to above change
- setGeometry(): code transfered from GuiApplication
* lyx_main.C: call LyX::ref().addLyXView() in there instead of in Application::createView()
*
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15183 a592a061-630c-0410-9148-cb99ea01b6c8
addWithStatus(). It also replaces LyXView uses with BufferView as none of the LyXView feature were used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15181 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insettabular.C
(InsetTabular::getStatus): enable COPY_ROW and COPY_COLUMN features
(InsetTabular::tabularFeatures): handle COPY_ROW and COPY_COLUMN
* src/tabular.h
(TabularFeature): add COPY_ROW and COPY_COLUMN
* src/tabular.[Ch]
(LyXTabular::copyRow): new method, copy a row
(LyXTabular::copyColumn): new method, copy a column
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15173 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView
- layoutChanged: new boost signal.
- LyXView owner(), owner_: deleted
* text3.C
- emit BufferView::layoutChanged instead of calling LyXView::setLayout directly
- LFUN_MOUSE_RELEASE: delete LyXView updateMenubar() and updateToolbars() direct calls.
The update is of both bars is done in WorkArea::dispatch().
* WorkArea.C
- dispatch(): add LyXView updateMenubar() call.
* LyXView
- connects to BufferView::layoutChanged directly to Toolbars::setLayout()
- setLayout(): deleted.
* qt4/GuiImplementation: modify BufferView construction (without LyXView).
All other files: cleanup header declaration of LyXView.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15153 a592a061-630c-0410-9148-cb99ea01b6c8
(only on windows).
* src/frontends/Dialogs.C
(Dialogs::hide): Don't send the signal if we are quitting
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15116 a592a061-630c-0410-9148-cb99ea01b6c8
Most of qt3 and gtk should stay compilable except for LyXView.h because the LyXFunc instance has been transferred to Application.
* frontends/Application: new class aimed to be the one unique interface between the frontend and the kernel. Contains one global pointer to the unique instanciation theApp.
* frontends/qt4/GuiApplication: renamed from qt4/Application, the qt4 specialisation of the Application class. Contains one global pointer to the unique instanciation guiApp (equal to theApp but pointing to a GuiApplication instead).
* frontends/qt4/lyx_gui.C: most of the code has been moved to Application and GuiApplication
All other file: adapted to new API.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15114 a592a061-630c-0410-9148-cb99ea01b6c8
The associated WorkArea is then responsible to connect these signals to its LyXView parent.
* BufferView:
- showDialog, showDialogWithData, showInsetDialog: new boost signals
* LyXView:
- connectBufferView(), disconnectBufferView(): new method in charge of the connection/disconnection of the above signal to associate private methods (showDialog(), etc).
* WorkArea
- setBufferView(): will connect/disconnect the BufferView to its LyXView parent.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15068 a592a061-630c-0410-9148-cb99ea01b6c8
* src/CutAndPaste.C (pasteSelectionHelper): pass Cursor
as argument, remove cursor-dependent arguments,
implement method to reset layout in insets which
forceParagraphsToDefault.
* src/CutAndPaste.C (pasteParagraphList): adapt call of
pasteSelectionHelper.
* insets/insetbox.C (doDispatch):
* insets/insetert.C (doDispatch):
* insets/insetcharstyle.C (doDispatch):
* insettext.[Ch] (forceParagraphsToDefault):
remove ad-hoc-Code to
reset paragraph layout.
This is now done generally in CutAndPaste.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15062 a592a061-630c-0410-9148-cb99ea01b6c8
No scons and cmake support! scons and cmake need to find out the size of
wchar_t and define this macro in config.h (example for 32bit wchar_t):
* The size of a `wchar_t', as computed by sizeof. */
#define SIZEOF_WCHAR_T 4
* configure.ac: Test size of wchar_t
* src/support/types.h: don't include docstring.h anymore.
Use wchar_t as lyx::char_type if it is 32 bit wide.
* src/support/docstring.h: Use lyx::char_type for defining docstring
* src/metricsinfo.h: include support/docstring.h instead of
support/types.h
* src/lyxlex.h: ditto
* src/frontends/font_metrics.h: ditto
* src/frontends/qt4/qt_helpers.h: ditto
* src/frontends/Painter.h: ditto
* src/errorlist.h: ditto
* src/support/lstrings.h: ditto
* src/lyxfunc.h: ditto
* src/LaTeX.h: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14991 a592a061-630c-0410-9148-cb99ea01b6c8
(QLPopupMenu::populate): Don't append a lyx::char_type to a qstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14988 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insettabular.C (getStatus):
* src/insets/insettext.C (doDispatch,getStatus): remove special code
for LFUN_INSET_DISSOLVE.
* src/text.C (dissolveInset): new method.
(erase, backspace): use dissolveInset.
* src/text3.C (dispatch): use dissolveInset for LFUN_INSET_DISSOLVE.
(getStatus): disable LFUN_INSET_DISSOLVE if the inset has more than one cell.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14940 a592a061-630c-0410-9148-cb99ea01b6c8
LyXText at cursor position is the same as LyXText at
cursor.selBegin() position. Fixes a crash (bug 2600).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14936 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/ControlMath.C
(latex_misc): Add intop and ointop
* lib/images/math/intop.xpm: New
* lib/images/math/ointop.xpm: Ditto
* lib/images/math/int.xpm: Add box to make the difference to intop clear
* lib/images/math/oint.xpm: ditto
* lib/Makefile.am: add new files
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14924 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/unicode.C
(bytes_to_ucs4): make it work on big endian machines
(bytes_to_ucs2): make it work on little endian machines
(ucs2_to_ucs4): ditto
(utf8_to_ucs4): Invoke iconv with explicit BE suffix
(ucs2_to_ucs4): ditto
(ucs4_to_ucs2): ditto
(ucs4_to_utf8): ditto
* configure.ac: Check for byte order
* development/scons/SConstruct: Ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14890 a592a061-630c-0410-9148-cb99ea01b6c8
* Dialogs::disconnect(string const & name): check if the dialog is an inset before resetting open_insets_
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14889 a592a061-630c-0410-9148-cb99ea01b6c8
isLetterChar(): verify also that this is a one-byte char (<256).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14877 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/qt_helpers.[Ch]
(toqstr): add variant for docstring
(qstring_to_ucs4): Use docstring and port from qt4 to qt3
* Many other files: Many std::string -> lyx::docstring conversions
* src/support/lstrings.[Ch]
(subst): Add variant for docstring and char_type
(externalLineEnding): std::string -> lyx::docstring
(internalLineEnding): std::string -> lyx::docstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14871 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/math_symbolinset.C
(void MathSymbolInset::maxima):
- newer maxima versions use inf instead of INF
- add support for greek pi
(void MathSymbolInset::mathematica):
- add support for \cdot
* src/mathed/math_stringinset.h
- account for the const version of asStringInset()
* src/mathed/math_extern.C
(bool extractScript):
- added bool superscript to formal parameters in order
to only extract superscripts
(MathArray::iterator extractArgument):
- leave out delimiters and a possible superscript
for function arguments
(bool isKnownFunction):
(bool extractFunctionName):
- recognize standard and user defined function names
(void splitScripts):
- correctly split scripts as expected by other functions
(MathAtom replaceDelims):
- ranamed as replaceParenDelims
(bool testOpenBracket):
(bool testCloseBracket):
- test for "[" and "]", respectively
(MathAtom replaceBracketDelims):
- replace something delimited by "[" and "]" with a
proper DelimInset
(void extractDelims):
- create a DelimInset for "[" and "]" delimiters, too
(void extractFunctions):
- improved recognition of function names
(bool testTermDelimiter):
- test for '+' or '-' as term delimiters
(MathArray::iterator extractTerm):
- extract a "term", i.e., something delimited by '+' or '-'
(bool testDiffItem):
- improved recognition of a "differential fraction"
(void extractDiff):
- call splitScripts() on numerator and denominator of a
differential fraction before analyzing them
(void extractLims):
- improved recognition of a limit function
(void extractStructure):
- reorganized order of searches
(MathArray pipeThroughMaxima):
- newer versions of maxima use simpsum instead of SIMPSUM
(string fromMathematicaName):
- translates from mathematica names
(MathArray pipeThroughMathematica):
- calls mathematica and collects its output
(MathArray pipeThroughExtern):
- add support for mathematica
* src/mathed/math_numberinset.C
* src/mathed/math_numberinset.h
(void MathNumberInset::mathematica):
- add support for mathematica
* src/mathed/math_matrixinset.C
* src/mathed/math_matrixinset.h
(void MathMatrixInset::mathematica):
- add support for mathematica
* src/mathed/math_diffinset.C
* src/mathed/math_diffinset.h
(void MathDiffInset::maxima):
- add support for maxima
(void MathDiffInset::mathematica):
- mathematica uses "D" and not "Dt" for normal derivatives
* src/mathed/math_liminset.C
* src/mathed/math_liminset.h
(void MathLimInset::maxima):
- add support for maxima
(void MathLimInset::mathematica):
- mathematica uses "Limit" and not "Lim" for limits
* src/mathed/math_exfuncinset.C
(string asMathematicaName):
- added some more function names
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14865 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/docstring.[Ch]
(from_ascii): new conversion function
(from_utf8): new conversion function
(to_utf8): new conversion function
(operator==) new, compare docstring and ASCII C string
(operator!=) new, compare docstring and ASCII C string
* src/support/Makefile.am: add new file docstring.C
* development/scons/scons_manifest.py: ditto
* src/funcrequest.[Ch]
(argument): change name to argument_ and type to docstring,
add an accessor
(FuncRequest): Add two new constructors taking a docstring argument
* all other files: adjust to the FuncRequest changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14861 a592a061-630c-0410-9148-cb99ea01b6c8
In src/support/os_cygwin.C path styles are converted (when needed) from
one style to another. I discovered a couple of cases in which an
unnecessary conversion takes place.
The default output path style in external_path is windows because this
function is also used when adding fonts though a native Windows API call.
However, this call is not made in an X11 build, so it is not necessary
that the output path style is windows.
Log:
Small fixes for cygwin.
* os_cygwin.C (is_windows_path): avoid unnecessary conversion
when path is relative
(convert_path_list): avoid unnecessary conversion when path
list is empty
(external_path): for an X11 build it is not necessary that
the output path style is windows
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14859 a592a061-630c-0410-9148-cb99ea01b6c8
* qfont_metrics.C: make use of above methods instead of those in unicode.[Ch]
* QLPainter.C: ditto
* QLyXKeySym.C: ditto + simplification and a BOOST_ASSERT that verifies that the event is one char only.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14852 a592a061-630c-0410-9148-cb99ea01b6c8
catch exception thrown by boost::filesystem if copying to the
backup directory fails (fixes bug 2740: crash and dataloss if
the backup dir was invalid or not writeable).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14849 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiWorkArea.C
(GuiWorkArea::dropEvent): Use toLocalFile instead of toString,
because toString omits the first backslash of UNC paths.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14846 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXView: save two setLayout() calls that are done in updateLayoutChoice() anyway.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14833 a592a061-630c-0410-9148-cb99ea01b6c8
* src/tex2lyx/text.C
(known_spaces): new, LaTeX names of known spaces
(known_coded_spaces): new, LyX names of known spaces
(parse_text): Recognize all known spaces
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14832 a592a061-630c-0410-9148-cb99ea01b6c8
element (like {a'}^{2}). (froward port from 14802)
* src/mathed/math_nestinset.C (script): when creating a script
inset, handle specially previous atom if it is a MathBraceInset
(this is used in interactive input).
* src/mathed/math_parser.C (parse1): when creating a script inset,
handle specially previous atom if it is a MathBraceInset (this is
used in parsing phase).
* src/mathed/math_scriptinset.C (write): put nucleus into braces
if it contains more than one element or is itself a script inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14819 a592a061-630c-0410-9148-cb99ea01b6c8
Log:
* lyxfunc.C:
- LyXFunc::dispatch(): put some save guards before using
BufferView::cursor() and sendDispatchMessage().
* BufferView_pimpl.C
- BufferView::Pimpl::setBuffer(): return before if exiting.
* WorkArea.C:
- WorkArea::redraw(): update the toolbar when greying out.
* LyXView.C:
- LyXView::setBuffer(): sanitization
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14815 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/Action.C (Action): do not set entry to
checkable by default; invoke update() to set it up.
(update): only set checkable property if needed.
* src/frontends/qt4/QLPopupMenu.C (populate): in the case of
a Command menu item, let Action set itself up.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14811 a592a061-630c-0410-9148-cb99ea01b6c8
if the bib file is in a non-readable directory (bug 2782).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14807 a592a061-630c-0410-9148-cb99ea01b6c8
in the text.
* src/insets/insetbase.h (notifyCursorLeaves): return a bool
indicating whether cursor is invalidated.
* src/mathed/math_nestinset.C (notifyCursorLeaves):
* src/mathed/math_hullinset.C (notifyCursorLeaves): adapt to
prototype change.
* src/mathed/math_scriptinset.[Ch] (notifyCursorLeaves): return
true when an inset has been deleted.
* src/BufferView.C (mouseSetCursor): do not call dEPM when cursor
is invalidated by notifyCursorLeaves.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14796 a592a061-630c-0410-9148-cb99ea01b6c8
* math_scriptinset.C (notifyCursorLeaves): call recordUndoInset
before deleting a cell; if the nucleus does not have scripts
anymore, delete it and replace it by its contents at enclosing
level.
(write): output scripts even when they are empry.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14793 a592a061-630c-0410-9148-cb99ea01b6c8
* config/lyxinclude.m4: reset release date for development versions.
* src/version.C.in: make lyx_release_date a placeholder.
* src/lyx_main.C (parse_version):
* src/frontends/controllers/ControlAboutlyx.C (getVersion): change a
bit the display of LyX release date.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14712 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/package.C.in: use PATH_MAX instead of MAX_PATH
* INSTALL.scons: add instruction for building qt3 2ith msvc
* development/scons/SConstruct: use the right lib (qt-mt3) and manifest file
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14709 a592a061-630c-0410-9148-cb99ea01b6c8
* src/CutAndPaste.C (setSelectionRange, replaceWord): remove.
(replaceSelectionWithString): select the new string after
replacement; add a bool parameter indicating in which sense the
selection is made.
* src/lyxfind.C (replace): adapt to above changes.
(find): comment out debug message.
* src/frontends/controllers/ControlSpellchecker.C (isLetter):
rename parameter.
(nextWord): take a LCursor as parameter; set the selection over
the word that has been found.
(check): adapt to changes above (the length of the word is not
necessarily the length of the selection -- fixes bug 2068).
(replace): use cap::replaceSelectionWithString
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14708 a592a061-630c-0410-9148-cb99ea01b6c8
LFUN_GOTOERROR.
* src/bufferview_funcs.C (findInset): exit early when at end of
document (and avoid a crash).
* src/insets/insetbase.[Ch]: remove ERROR_CODE
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14706 a592a061-630c-0410-9148-cb99ea01b6c8
Log:
* BufferView/pimpl:
- scrollDocView(): call to BufferView::update() deleted.
- scrollDocView(): second part is now in setCursorFromScrollbar()
- setCursorFromScrollbar(): new method.
* WorkArea:
- setBufferView(): show the cursor immediately
- redraw(): call to updateScrollbar()
- updateScrollbar(): new method
- scrollBufferView(): fix it and show the cursor immediately.
* qt4/GuiWorkArea
- setScrollbarParams(): now disable the Qt scrollbar tracking.
- paintEvent(): scrollbar related code deleted
* qt3/QWorkArea
- setScrollbarParams(): now disable the Qt scrollbar tracking.
* qt3/QContentPane
- paintEvent(): scrollbar related code deleted
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14704 a592a061-630c-0410-9148-cb99ea01b6c8
gcc 3.3.x and older. They were first supplied with the libstdc++ of
gcc 3.4.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14685 a592a061-630c-0410-9148-cb99ea01b6c8
- simplify setting/unsetting of item
- consolidate 2 methods that set bulletSelected
- store character (int) instead of pointer to item
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14672 a592a061-630c-0410-9148-cb99ea01b6c8
(Buffer::errorList): simplify
* src/buffer.h
emptyErrorList_ move to buffer.C and make it static const
* src/lyx_main.C
(LyX::exec2): Use for_each instead of for loop
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14667 a592a061-630c-0410-9148-cb99ea01b6c8
- src/support/unicode.[Ch]: new files with functions for converting
to and fro ucs4, ucs2 and utf8.
- src/support/docstring.h: specialization of basic_string that
holds a uint32_t internally.
- Several functions changed to use char_type instead of char or unsigned char.
- Qt3 and Qt4 sends ucs2 on to core
- Gtk sends ucs4 on to core
- Read and write utf-8 .lyx files.
- font_metrics and painter updated to handle ucs4 chars as input.
- Quite a bit of ugly compability code, conversion string->docstring, etc.
- Have fun...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14661 a592a061-630c-0410-9148-cb99ea01b6c8
* src/graphics/GraphicsConverter.C
(Converter::Impl::Impl): Don't call the default converter directly,
but create a temporary script with build_script() as for the
configured converters. This makes sure that the file name does not
need to be passed on the command line anymore.
(build_script): This cannot fail anymore, so change the return type
to void
(build_script): Use build_conversion_command also for the default
converter. This has the advantage that the special code for moving
${outfile}.0, ${outfile}.1 is actually used for ImageMagick's convert.
(build_conversion_command): factored out from build_script
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14657 a592a061-630c-0410-9148-cb99ea01b6c8
I had no choice but to use string for the map key. This is
because the only information that could be passed to the controller is a
string.
With this new architecture, persistent error lists are now possible.
* Buffer
- errorList_, addError(), : deleted
- std::map<std::string, ErrorList> errorLists_ : new member
- errorList(std::string const & type): associated accessors
* buffer_funcs.C
- bufferErrors(Buffer const & buf, TeXErrors const & terr): now needs a third errorList argument
- bufferErrors(Buffer const & buf, ErrorList const & el): deleted.
* Converter
- convert(): now needs an ErrorList argument instead of filling the Buffer errorList member directly.
- runLaTeX(): ditto
- scanLog(): ditto
* CutAndPaste.C
- pasteParagraphList(): ditto
- pasteSelection(): ditto
* lyxtext.h/text.C
- readParagraph(): ditto
- LyXText::read(): ditto
* importer:
- Importer::Import(): ditto
* BufferView_pimpl.C
- loadLyXFile(): send the Buffer::errors() signal instead of calling LyXView::showErrorList() directly.
* exporter.C
- Export(): send the Buffer::errors() signal instead of calling LyXView::showErrorList() directly in lyxfunc.C
* ControlErrorList.C
- initialiseParams(): translation operation transfered here from LyXView::showErrorList().
* LyXView.C
- LoadLyXFile(): add a showErrorList("Parse") call.
- showErrorList(): simplified due to code transferred to the ControlErrorList.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14652 a592a061-630c-0410-9148-cb99ea01b6c8
* src/tex2lyx/text.C
(void parse_noweb): new, parse a noweb code chunck
(void parse_text): handle noweb <<xxx>>= and [[xxx]] constructs
* src/tex2lyx/tex2lyx.[Ch]: new global variable noweb_mode and
command line option to set it
* src/tex2lyx/preamble.C
(parse_preamble): prepend "literate-" to the textclass name in
noweb mode
* lib/configure.py
(checkConverterEntries): fix literate -> lyx converter
(checkConverterEntries): fix typo in latex -> sxw converter
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14635 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/layouts/revtex4.layout: refer to tex2lyx rather than
reLyX in comments
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14627 a592a061-630c-0410-9148-cb99ea01b6c8
preferences
* src/lyxfunc.C
(quoteArg): move to LyXLex
(LyXFunc::dispatch): adjust to the change above
* src/lyxlex.[Ch]
(quoteString): new, moved from lyxfunc.C
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14620 a592a061-630c-0410-9148-cb99ea01b6c8
* src/BufferView_pimpl.C (dispatch/LFUN_NEXT_INSET_TOGGLE): moved from
LyXText.
* src/text3.C (dispatch/LFUN_NEXT_INSET_TOGGLE): moved to
BufferView::Pimpl, since this should work in mathed too.
* src/mathed/math_nestinset.C (doDispatch/LFUN_INSET_TOGGLE): do not try to
do the work which belongs to LFUN_NEXT_INSET_TOGGLE (bug 2756).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14617 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LyXAction.C:
* src/lfuns.h:
- add new lfun LFUN_INSET_DISSOLVE.
* src/insets/insettext.C
(void InsetText::doDispatch):
- dissolve inset when hitting backspace in the
very first or delete in the very last position
of an inset.
* src/text3.C
(void LyXText::dispatch):
(bool LyXText::getStatus):
- implement new lfun LFUN_INSET_DISSOLVE.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14572 a592a061-630c-0410-9148-cb99ea01b6c8
* src/graph.C
(Graph::getReachable): Only add a child format to only viewable
formats if the child or parent has a viewer. Previously a child
format was also added when there was no viewer at all.
* lib/configure.py
(checkFormatEntries): add text2, text3 and text4 formats
(checkConverterEntries): add ps2ascii , pstotext and catdvi converters
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14528 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/gtk/GWorkArea.C
(GWorkArea::onScroll): redraw the workarea
(GWorkArea::onButtonPress): Call WorkArea::dispatch instead of
BufferView::workAreaDispatch in order to redraw the workarea
(GWorkArea::onButtonRelease): ditto
(GWorkArea::onMotionNotify): ditto
* src/frontends/WorkArea.h
(dispatch): make public
* src/frontends/qt3/QContentPane.C
(QContentPane::scrollBarChanged): redraw the workarea
(QContentPane::generateSyntheticMous): Call WorkArea::dispatch instead
of BufferView::workAreaDispatch in order to redraw the workarea
(QContentPane::mousePressEvent): ditto
(QContentPane::mouseReleaseEvent): ditto
(QContentPane::mouseMoveEvent): ditto
(QContentPane::doubleClickTimeout): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14517 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LaTeX.C
(LaTeX::deplog): Add the toc file to the dependencies if a line
\tf@toc=\write#
is present in the log file, since miktex does not write the line
\openout# = `sample.toc'.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14496 a592a061-630c-0410-9148-cb99ea01b6c8
* src/tex2lyx/preamble.C
(parse_preamble): ignore the definition of the lyxgreyedout
environment
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14495 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/tex_helpers.h: doxyfy comment
* src/frontends/controllers/tex_helpers.C
(rescanTexStyles): Pop up a message box when TeXFiles.py fails
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14488 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/math_factory.C
(createMathInset): Create a MathFracInset of kind OVER for \over
* src/mathed/math_fracinset.C
(MathFracInset::draw): handle kind OVER
(MathFracInset::drawT): ditto
(MathFracInset::write): ditto
(MathFracInset::name): ditto
(MathFracInset::extraBraces): ditto
* src/mathed/math_fracinset.h
(Kind): New kind OVER
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14487 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyxfunc.C
(quoteArg): new, quotes arguments for the "log" dialog
(LyXFunc::dispatch): quote log filename
* src/frontends/controllers/ControlLog.C
(ControlLog::initialiseParams): parse \" as " and \\ as \ in filename
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14481 a592a061-630c-0410-9148-cb99ea01b6c8
(BufferList::close): Don't ignore unsaved changes if quitting == true
(BufferList::close): Use menuWrite(buf) instead of buf->save(),
because menuWrite tells the user if the file could not be saved and
asks for another name
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14475 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyx_cb.C
(newFile): Only set the new buffer if it is valid
* src/BufferView_pimpl.C
(BufferView::Pimpl::loadLyXFile): Test whether newFile succeeded
* src/lyxfunc.C
(LyXFunc::menuNew): Only set the new buffer if it is valid
(LyXFunc::open): ditto
* src/importer.C
(Importer::Import): ditto
* src/lyx_main.C
(LyX::exec2): Only use the new buffer if newFile succeeded
* src/buffer_funcs.C
(newFile): discard the buffer and return 0 if the template is invalid
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14474 a592a061-630c-0410-9148-cb99ea01b6c8
* src/tex2lyx/tex2lyx.C
(tex2lyx): output an empty paragraph if the document is empty
* src/tex2lyx/context.C
(Context::check_layout): set empty to false
* src/tex2lyx/context.[Ch]
(empty): new flag, tells whether all contexts are empty
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14469 a592a061-630c-0410-9148-cb99ea01b6c8
TODO 1: All occurrences of "LyXView::showErrorList()" in the "kernel" should be replaced by a boost signal emission (Buffer::errors()). This signal is already connected to this showErrorList() slot.
TODO 2: The ErrorList mechanism is used wrongly in a number of place, most notably in "Converter.C". Instead of replacing the ErrorList in the "Buffer" class, the "Converter" class should maintain its own list instead and connect directly to the LyXView::showErrorList() slot.
Buffer:
* errorList_: new private member and associated access methods.
* setErrorList(): new accessor method.
* addError(): apend an error to the errorList_.
* error(): deleted.
* errors(): new boost signal, unused for now. Shall be used instead of LyXView::showErrorList().
LyXView:
* getErrorList(), addError(), errorlist_, errorConnection_: deleted.
* errorsConnection_: new boost connection for the Buffer::errors() signal.
lyx_main.C:
* LyX::exec2(): manually print all errors.
BufferView.h: remove unneeded ErrorList forward declaration.
BufferView::pimpl::menuInsertLyXFile(): delete Buffer::error() connection and add a FIXME comment
text.C: Use Buffer::addError() instead of Buffer::error() signal emission.
ControlErrorList.C: get the ErrorList from the Buffer instead of LyXView
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14467 a592a061-630c-0410-9148-cb99ea01b6c8
* src/graphics/GraphicsCacheItem.C
(CacheItem::Impl::convertToDisplayFormat): Don't derive the temp
file name from the original file name. This ensures that it is
composed of valid characters only.
* src/graphics/GraphicsConverter.C: remove example script, since it
will get out of date.
(build_script): Copy the original file to a temp file before the
conversion chain starts. This avoids problems with converters that
can't handle ' in filenames.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14459 a592a061-630c-0410-9148-cb99ea01b6c8
With this change, the only difference between BufferView.h and BufferView_pimpl.h is "cursor.h" so I think it is time to merge the two classes at last.
BufferView:
* showErrorList(), getErrorList(): transfered to LyXView.
BufferView::pimpl
* addError(), showReadonly(), connectBuffer(), disconnectBuffer(): transfered to LyXView.
CutAndPaste.C: adapted to API changes
frontends/controllers/ControlErrorList.C: ditto
lyxfunc.C: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14458 a592a061-630c-0410-9148-cb99ea01b6c8
The performance may suffer a bit because we do the second drawing step in all cases. This could be possibly optimized out by checking the return value of the BufferView::update() method in "lyxfunc.C:1610". But it is maybe better to keep those two parts of the frontend ignorant of each other: the event handling and the drawing.
BufferView:
* needRedra(), need_redraw_: deleted.
* updateMetrics(): now public.
* update(): only do the first drawing step. Returns true if a full updateMetrics is needed before drawing on screen.
WorkArea:
* redraw(): no check on BufferView::needRedraw(), call updateMetrics() unconditionally.
* processKeySim(): uneeded "redraw()" call commented out. When/if the call to LyXView::redrawWorkArea() in "lyxfunc.C:1610" is not needed anymore, this line should be uncommented out.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14456 a592a061-630c-0410-9148-cb99ea01b6c8
movement LFUNs; use LCursor::selHandle consistently (fixes bugs 2119
and 2259, and also a crash related to with dEPM)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14436 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LyXAction.C
(LyXAction::init): handle new LFUN_CLIPBOARD_PASTE
* src/insets/insettabular.C
(InsetTabular::doDispatch): ditto
* src/insets/insetbox.C
(InsetBox::doDispatch): ditto
* src/insets/insetert.C
(InsetERT::doDispatch): ditto
(InsetERT::getStatus): ditto
* src/insets/insetcharstyle.C
(InsetCharStyle::doDispatch): ditto
* src/BufferView_pimpl.C
(BufferView::Pimpl::selectionRequest): stuff selection, not clipboard
* src/mathed/math_nestinset.C
(MathNestInset::lfunMousePress): get stuff selection, not clipboard
(MathNestInset::lfunMouseRelease): clipboard -> selection in
commented code
* src/CutAndPaste.C
(cutSelection): ditto
* src/frontends/{qt3,gtk}/GuiImplementation.C
(GuiImplementation::newWorkArea): create new selection, not clipboard,
since the clipboard is now an object
(GuiImplementation::destroyWorkArea): destroy selection, not clipboard
* src/frontends/{qt4,qt3,gtk}/GuiSelection.h: new, copied from
GuiClipboard.h
* src/frontends/{qt4,qt3,gtk}/GuiSelection.C: new, copied from
GuiClipboard.C
* src/frontends/{qt3,gtk}/GuiImplementation.h
(selection): new accessor for selection_
(selection_): new, the global selection object
* src/frontends/{qt4,qt3,gtk}/Makefile.am: add GuiSelection.C and
GuiSelection.h
* src/frontends/{qt4,qt3,gtk}/GuiClipboard.C
(GuiClipboard::get): return clipboard, not selection
(GuiClipboard::put): stuff clipboard, not selection
* src/frontends/{qt4,qt3,gtk}/GuiClipboard.h
(haveSelection): remove (this is now in GuiSelection)
* src/frontends/{qt3,gtk}/GuiClipboard.h
(old_work_area_): remove, since it is not needed anymore
* src/frontends/gtk/ghelpers.C
(getGTKStockIcon): handle LFUN_CLIPBOARD_PASTE
* src/frontends/Clipboard.h
(haveSelection): remove (this is now in Selection)
* src/frontends/qt4/GuiImplementation.[Ch]
(GuiImplementation::selection): new accessor for selection_
* src/frontends/Gui.h
(selection): New accessor for the global selection object
* src/frontends/Selection.h; new, copied from Clipboard.h
* src/frontends/Makefile.am: add Selection.h
* src/text3.C
(various): s/clipboard().haveSelection/selection().haveSelection/
(LyXText::dispatch): handle LFUN_CLIPBOARD_PASTE
(LyXText::getStatus): ditto
* src/lfuns.h: new lfun LFUN_CLIPBOARD_PASTE
* lib/ui/stdmenus.ui: add new lfun LFUN_CLIPBOARD_PASTE
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14408 a592a061-630c-0410-9148-cb99ea01b6c8
(build_script): replace unused code for equal formats by an assert
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14400 a592a061-630c-0410-9148-cb99ea01b6c8
* rowpainter:
- paintText: take the painter as an argument
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14384 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/WorkArea:
- processKeySym(): new method that should be used by all frontends
instead of buffer_view_->workAreaKeyPress().
* frontends/qt4/GuiWorkArea:
- keyPressEvent(): call WorkArea::processKeySym() instead of
buffer_view_->workAreaKeyPress().
* frontends/gtk/GWorkArea.C:
* frontends/qt3/QContentPane.C:
- call WorkArea::processKeySym() instead of
buffer_view_->workAreaKeyPress()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14383 a592a061-630c-0410-9148-cb99ea01b6c8
* CoordCache:
- startUpdating(), doneUpdating(): deleted because the screen drawing
is now done at one place (WorkArea::redraw()) and cannot be called
for within itself. Those debug methods are then not useful.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14382 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/LyXView:
- redrawWorkArea(): new temporary method called from within
BufferView::pimpl::update() that calls WorkArea::redraw()
in order to do the actual screen redrawing.
* frontends/WorkArea:
- the redraw() method now check if the the attached bufferView
needs a screen redraw().
* BufferView:
- needsRedraw(): new method for WorkArea::redraw()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14381 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/ControlPreamble.[Ch]:
remove files, since this controller was only used
by the xforms frontend
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14352 a592a061-630c-0410-9148-cb99ea01b6c8
- Change unsigned -> signed
- Change signed -> unsigned
- Add a cast or two (really few of those)
- Remove/comment out unused variables
- Comment out unused arguments
- Add missing cases to switches.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14344 a592a061-630c-0410-9148-cb99ea01b6c8
* src/main.C
(main): return LyX::exec()
* src/frontends/{gtk,qt3,qt4}/lyx_gui.C
(lyx_gui::exec): Change return value to int
(lyx_gui::start): ditto
* src/frontends/qt[3,4]/lyx_gui.C
(lyx_gui::exit): Call QApplication::exit instead of ::exit, this
hack is not needed anymore
* src/frontends/lyx_gui.h
(lyx_gui::exec): Change return value to int
(lyx_gui::start): ditto
* src/lyxtextclasslist.[Ch]
(LyXSetStyle): SChange return value to bool and don't call ::exit
* src/lyx_main.C
(showFileError): Don't exit anymore
* src/lyx_main.[Ch]
(LyX::exec): Change return value to int
(LyX::priv_exec): ditto
(LyX::exec2): ditto
(LyX::init): Change return value to bool
(LyX::readRcFile): ditto
(LyX::readUIFile): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14339 a592a061-630c-0410-9148-cb99ea01b6c8
- slight speedup by checking if debugging before creating
the debug output.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14333 a592a061-630c-0410-9148-cb99ea01b6c8
- streamline a bit to only run updateMetrics once
- do not take a backup copy of theCoords
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14332 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView, BufferView::pimpl:
- metrics_info_: private variable holding ViewMetricsInfo
- viewMetricsInfo(): accessor function
- updateMetrics(): renamed from metrics(), sets metrics_info_
- update(): change to use updateMetrics()
* frontends/WorkArea:
- redraw(): get the ViewMetricsInfo through accessor to BufferView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14331 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView,BufferView::Pimple:
- workArea_ removed
* frontends/LyXView:
- now contains a pointer reference to the current
WorkArea instead of the BufferView.
- workArea(): temporary access method
* frontends/WorkArea:
- bufferView(): new access methods.
* GuiImplementation: updated due to above changes
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14329 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView and Bufferview::pimpl: repaintAll() methods deleted.
* rowpainter.C:
- refreshInside : new variable in the anonymous namespace.
- use of refreshInside instead of the repaintAll() methods
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14324 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/os_win32.C: Query the registry about cygwin, instead of
calling uname
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14276 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/os.[Ch]
(python): new function, return the python command
* lib/lyx2lyx/lyx_1_5.py
(revert_font_settings): replace tabs with spaces
The rest is simply s/python/python -tt/ and
s/"python"/lyx::support::os::python()/ where appropriate.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14270 a592a061-630c-0410-9148-cb99ea01b6c8
- natbib style (the combox) works
- when moving/up down the item stays selected (allowing sequential ups/downs)
- when deleting the next selected entry gets focus (allowing sequential deletes)
- the info is now shown and updated
- find subsets the available entries as you type
- no additional find dialog (removed QCitationFind.ui)
- selecting with double-click
- removal of unused: Citation class, toVector() function
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14252 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/xforms/FormSpellchecker.C (update):
* src/frontends/qt[34]/QSpellchecker.C (update_contents): fix bug
2218: Spellchecker doesn't pop up dialogue window for the first
misspelled word.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14246 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.C set width and height to 0
* frontends/qt3/lyx_gui.C test on 0
* frontends/qt4/lyx_gui.C test on 0
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14235 a592a061-630c-0410-9148-cb99ea01b6c8
(doDispatch): fix off by one error when checking cur.idx() (bug 2655)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14185 a592a061-630c-0410-9148-cb99ea01b6c8
* QLPainter::start() now re-initialize qp_
* QLPainter::end() now end qp_
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14184 a592a061-630c-0410-9148-cb99ea01b6c8
in available space instead of line pairs.
* rowpainter.C
(paintPar): change background rectangle
* insets/insettext.C
(InsetText::draw):
(InsetText::drawSelection): simplify rectangle drawing
* insets/insettext.h: dump Tall()
* insets/insetcollapsable.C
(InsetCollapsable::metrics): subtract button from available
space in case of inlined inset
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14161 a592a061-630c-0410-9148-cb99ea01b6c8
* qt4/Application.[Ch]: was not merged (GUI API cleanup merge) for an unknown reason
* qt4/clipboard.C: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14153 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/lyx2lyx/LyX.py (format_relation): add file format 247 (from Georg BAUM).
* lib/lyx2lyx/lyx_1_5.py: add convert_font_settings, revert_font_settings (from Georg BAUM).
* lib/chkconfig.ltx: Test for newly supported font packages
* lib/doc/LaTeXConfig.lyx.in: document newly supported font packages
* lib/doc/UserGuide.lyx: document new UI.
* lib/doc/Extended.lyx: update PostScript font documentation
* development/FORMAT: document file format change 246->247.
* src/tex-strings.[Ch]: new strings tex_fonts_roman, tex_fonts_sans,
tex_fonts_monospaced (with GUI equivalents).
* src/buffer.C: Format up to 247.
* src/bufferparams.C:
new params fontsRoman, fontsSans, fontsTypewriter, fontsDefaultFamily,
fontsSC, fontsOSF, fontsSansScale and fontsTypewriterScale
(LyXFont const BufferParams::getFont): consider switch of default family.
(string const BufferParams::loadFonts): new method to get all the LaTeX
font stuff done.
* src/paragraph.C
(LyXFont const Paragraph::getFont):
(LyXFont const Paragraph::getLabelFont):
(LyXFont const Paragraph::getLayoutFont): user buffer's not textclass's
default font
* src/text.C
(int LyXText::leftMargin):
(int LyXText::rightMargin): user buffer's not textclass's default font
* src/text2.C
(LyXFont LyXText::getFont):
(LyXFont LyXText::getLayoutFont):
(LyXFont LyXText::getLabelFont): check if the family of the default document
font has been customized.
* src/frontends/gtk/GDocument.[Ch]: implement new font ui (from Georg BAUM).
* src/frontends/gtk/glade/document.glade: implement new font ui (from Georg BAUM).
* src/frontends/qt3/Makefile.dialogs: add new FontModuleBase
* src/frontends/qt3/ui/FontModuleBase.ui: new File
* src/frontends/qt3/ui/TextLayoutModuleBase.ui: remove font widgets
* src/frontends/qt3/QDocument.C
* src/frontends/qt3/QDocumentDialog.[Ch]: implement new font ui
* src/frontends/qt4/Makefile.dialogs: add new FontUi
* src/frontends/qt4/QDocumentDialog.[Ch]: implement new font ui
* src/frontends/qt4/ui/FontUi.ui: new File
* src/frontends/qt4/ui/TextLayoutUi.ui: remove font widgets
* src/frontends/qt4/ui/compile_uic.sh: add new FontUi
* src/frontends/xforms/FormDocument.[Ch]: implement new font ui
* src/frontends/xforms/forms/form_document.fd: add new font tab.
* src/frontends/controllers/ControlDocument.[Ch]
(char ControlDocument::fontfamilies):
(char ControlDocument::fontfamilies_gui):
(bool ControlDocument::isFontAvailable):
(bool ControlDocument::providesSC):
(bool ControlDocument::providesOSF):
(bool ControlDocument::providesScale): new methods, providing font info.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14143 a592a061-630c-0410-9148-cb99ea01b6c8
(Formats::view): Call the viewer with the absolute filename instead
of changing the working directory to avoid a race condition on
systems with a slow fork().
(Formats::edit): Ditto (editor instead of viewer)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14142 a592a061-630c-0410-9148-cb99ea01b6c8
Don't use multiple QPainter::begin on the same QPaintDevice.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14101 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyx_cb.C
(quitLyX): lyx_gui::exit takes now an argument
* src/frontends/{gtk,xforms}/lyx_gui.C
(lyx_gui::parse_init): rename to lyx_gui::exec and call LyX::exec2
(void lyx_gui::exit): add exit status argument
* src/frontends/qt{3,4}/lyx_gui.C
(cleanup): new function for pointer cleanup
(lyx_gui::parse_init): rename to lyx_gui::exec and call LyX::exec2,
turn static variables into automatic variables
(void lyx_gui::exit): add exit status argument
(start): Use cleanup()
(exit): ditto
* src/frontends/lyx_gui.h
(parse_init): remove
(exec): new
(exit): Take exist status argument
* src/lyx_main.[Ch]
(LyX::priv_exec): split into LyX::priv_exec and LyX::exec2
* src/lyx_main.C
(lyx_exit): New, choose the right exit function
(showFileError): call lyx_exit
(LyX::queryUserLyXDir): ditto
(LyX::init): ditto
(LyX::priv_exec): ditto
(LyX::priv_exec): Replace want_gui by lyx_gui::use_gui
(LyX::priv_exec): replace lyx_gui::parse_init by lyx_gui::exec and
exec2
(LyX::init): Replace gui argument by lyx_gui::use_gui
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14036 a592a061-630c-0410-9148-cb99ea01b6c8
a warning.
* src/text.C (readParToken): handle \change_inserted and
\change_deleted tokens with wrong author index (bug 2614).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14028 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/ALLFRONTENDS/lyx_gui.C: use passed width/height/posx/posy in lyx_gui::start
* src/frontends/lyx_gui.h: prototype change for lyx_gui::start
* src/lyx_main.C: determine windows size and position from lyxrc or session.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13953 a592a061-630c-0410-9148-cb99ea01b6c8
TODO: reorganize this code. In particular make sure that this advise from Qt documentation is respected:
Since the QApplication object does so much initialization, it must be created before any other objects related to the user interface are created.
Right now this is not the case. For example, "FontLoader::initFontPath()" is called before the QApplication creation. Moreover, I suspect that a number of global variables contains Qt object that are initialized before the passage through parse_init(). This might also explain the message displayed by Qt that caused the hanging:
QObject::killTimer: timers cannot be stopped from another thread
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13948 a592a061-630c-0410-9148-cb99ea01b6c8
(LyXServerSocket::~LyXServerSocket): Don't try to unregister and
close fd_ if the socket is disabled (avoids crash on win, from Peter
KÃŒmmel)
(LyXServerSocket::~LyXServerSocket): Check the return value of close()
(LyXDataSocket::~LyXDataSocket): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13941 a592a061-630c-0410-9148-cb99ea01b6c8
"Don't view/edit this format", and 'auto' means "Use the default viewer/editor".
* src/format.C
(fixCommand): Change semantics: "none" is equal to "", and "auto"
is removed if canAutoOpenFile returns false.
* src/frontends/xforms/FormPreferences.C
(FormPreferences::SpellOptions::apply): "none" -> ""
* src/lyxrc.C
(LyXRC::read): "none" -> ""
* lib/doc/Customization.lyx: Document the autoopen feature
* lib/configure.py
(checkProg): add optional not_found argument, defaulting to 'none'
(checkViewer): new, equivalent to checkProg with not_found = 'auto'
(checkFormatEntries): call checkViewer instead of checkProg for
viewers and editors
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13929 a592a061-630c-0410-9148-cb99ea01b6c8
qt4/qfont_loader.h: reverted to last version and added comment about pointer reference.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13927 a592a061-630c-0410-9148-cb99ea01b6c8
Disable saving of bookmarks in mathed for it is not yet supported
and makes LyX crash (bug 2597)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13911 a592a061-630c-0410-9148-cb99ea01b6c8
do not mark the cursor undispatched after mouse (button 3) press
(prevents the cursor from leaving the tabular when opening the
dialog).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13906 a592a061-630c-0410-9148-cb99ea01b6c8
fix crash due to invalidated
cursor after insertAciiString (bug 2603).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13905 a592a061-630c-0410-9148-cb99ea01b6c8
(InsetGraphics::prepareFile): Rename file in the temp dir if the
extension does not match the format (bug 2235)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13898 a592a061-630c-0410-9148-cb99ea01b6c8
is changed
* src/cursor.C: remove unused 'using std::swap'
* src/BufferView.C: ditto
* src/CutAndPaste.[Ch]
(switchBetweenClasses): replace ParagraphList argument with InsetText
argument. This avoids an unnecessary swap in lyxfunc.C.
* src/CutAndPaste.C
(pasteSelectionHelper): Adjust to the changes above
(pasteSelectionHelper): Use ParagraphList::swap instead of std::swap.
This fixes the crash.
* src/lyxfunc.C
(LyXFunc::dispatch): Adjust to switchBetweenClasses changes
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13895 a592a061-630c-0410-9148-cb99ea01b6c8
(document_): new flag, telling whether this is a document format and
we want to show this format in the export and view menus
(documentFormat): accessor for document_
* src/format.h: Add some documentation
* src/frontends/qt3/QPrefsDialog.C
(QPrefsDialog::QPrefsDialog): handle new documentCB checkbox
(QPrefsDialog::switch_format): ditto
(QPrefsDialog::updateFormatsButtons): ditto
(QPrefsDialog::new_format): ditto
(QPrefsDialog::modify_format): ditto
* src/frontends/qt3/ui/QPrefFileformatsModule.ui: Add documentCB checkbox
* src/frontends/qt4/QPrefsDialog.C
(QPrefsDialog::QPrefsDialog): handle new documentCB checkbox
(QPrefsDialog::switch_format): ditto
(QPrefsDialog::updateFormatsButtons): ditto
(QPrefsDialog::new_format): ditto
(QPrefsDialog::modify_format): ditto
* src/frontends/qt4/ui/QPrefFileformatsUi.ui: Add documentCB checkbox
* src/frontends/xforms/FormPreferences.C
(FormPreferences::Formats::build): handle new check_document checkbox
(FormPreferences::Formats::input): ditto
(FormPreferences::Formats::Add): ditto
(FormPreferences::Formats::Browser): ditto
* src/frontends/xforms/forms/form_preferences.fd: Add check_document
checkbox
* src/lyxrc.C
(LyXRC::read): Remove compatibility code for 1.3 \format entries.
Read the new format flags (but don't require them for 1.4
compatibility)
(LyXRC::write): Write the new format flags
* src/MenuBackend.C
(expandFormats): Remove the hardcoded exception for image formats
and use Format::isDocument() instead
* lib/doc/Customization.lyx: Document auto viever/editor and the
"document format" flag
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13887 a592a061-630c-0410-9148-cb99ea01b6c8
* panelstack.C: automatic creation of parent category if not already created.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13886 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/qfontloader.C (initFontPath, ~FontLoader): add fonts in
lyxdir/fonts to system fonts in windows; remove them in destructor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13877 a592a061-630c-0410-9148-cb99ea01b6c8
* CutAndPaste.C
(eraseSelectionHelper): merge (conditionally) only first and last
paragraph of selection
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13875 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetinclude.h
(updateBibfilesCache): adjust comment
(getBibfilesCache): ditto
* src/insets/insetinclude.C
(getChildBuffer): new, return the buffer of the child if it exists
(updateBibfilesCache): update the child buffer only if already loaded
(getBibfilesCache): scan the child buffer only if already loaded
* src/buffer.h
(updateBibfilesCache): adjust comment
(getBibfilesCache): ditto
(bibfilesCache_): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13869 a592a061-630c-0410-9148-cb99ea01b6c8
atm this does not work because it depends on the order in which these entries were added.
now the order is alphabetical and things are messed up.
the attached patch adds the nr of the format/converter to the listwidgetitem as a type and uses that to get to the right details
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13864 a592a061-630c-0410-9148-cb99ea01b6c8
Can you move the SUBDIRS var back to the top of the file pleae.
Also EXTRA_DIST should be at the top.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13863 a592a061-630c-0410-9148-cb99ea01b6c8
* configure.ac: removed frontends/qt4/moc compilation.
* frontends/qt4/: moc files (*_moc.cpp) are now included at the end of relevant source file (*.C)
* SConscript: adapted to "moc included in .C file" change.
* frontends/qt4/Makefile.am: adapted to "moc included in .C file" change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13860 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyx_main.C (init): call Formats::setAutoOpen.
* src/lyxrc.C (read): do not reset editor/viewer values of "none".
* src/format.C (fixCommand): helper function: tweak command depending
of the availability of OS viewer/editor.
(setAutoOpen): run fixCommand over all the formats.
* src/support/Makefile.am: under win32, link against shlwapi.dll.
* src/support/os_*.C (canAutoOpenFile, autoOpenFile): new
functions, used to let the OS handle viewers and editors it knows about.
* configure.ac: improve check for shlwapi.
* lib/configure.py: remove check for native windows viewers.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13855 a592a061-630c-0410-9148-cb99ea01b6c8
lyxrc.dist, but before reading lyxrc.defaults; add extra_prefix to
the PATH before reconfiguring.
(needsUpdate): new helper function; returns true if file does not
exist or is older than configure.py.
(queryUserLyXDir): check textclass.lst and packages.lst in
addition to lyxrc.defaults.
(reconfigureUserLyXDir): use SystemCall, since system() does not
wait on windows.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13816 a592a061-630c-0410-9148-cb99ea01b6c8
* SConstruct: force the use of g++ under windows, and use the right libraries
* config/qt4.py: check QtGui4 etc as well.
* src/SConscript: link to the right libraries
* src/tex2lyx/SConscript: use the right libraries
* src/frontends/qt3/SConscript: manually moc .h files under windows
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13814 a592a061-630c-0410-9148-cb99ea01b6c8
remove lookupChangeType;
rename setChange to setChangeType;
rename setChangeFull to setChange
src/paragraph_pimpl.h:
remove lookupChange;
rename lookupChangeFull to lookupChange;
rename setChange to setChangeType;
rename setChangeFull to setChange
src/changes.h: remove lookup;
rename lookupFull to lookup;
rename loose_contains to containsOrPrecedes;
adjust the other files accordingly
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13812 a592a061-630c-0410-9148-cb99ea01b6c8
adjust some commands according to the LyX naming conventions
(toggle-tooltip => tooltip-toggle, *-change(s) => change(s)-*)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13811 a592a061-630c-0410-9148-cb99ea01b6c8
browsebox is not build anymore and commented out in bulletsmodule
bullets are disabled in documentdialog: wasn't working before either
remove qt3support!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13809 a592a061-630c-0410-9148-cb99ea01b6c8
* SConstruct: pass -Wl, options correctly
* scons_utils.py: find boost libraries with more complex names
* qt4.py: fix a bug regarding the use of pkg_config
* src/SConscript: build a static library for src/*
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13808 a592a061-630c-0410-9148-cb99ea01b6c8
Index: src/frontends/qt4/QCitationDialog.C
Index: src/frontends/qt4/QCitationDialog.h
Index: src/frontends/qt4/ui/QCitationFindUi.ui
Index: src/frontends/qt4/QPrefsDialog.C
Index: src/frontends/qt4/QPrefsDialog.h
Index: src/frontends/qt4/ui/QPrefColorsUi.ui
Index: src/frontends/qt4/ui/QPrefCopiersUi.ui
Index: src/frontends/qt4/ui/QPrefFileformatsUi.ui
Index: src/frontends/qt4/ui/QPrefConvertersUi.ui
Index: src/frontends/qt4/QParagraphDialog.C
no more qt3 drag n drop:
Index: src/frontends/qt4/QWorkArea.C
as discussed on list:
Index: src/frontends/qt4/QLyXKeySym.C
Index: src/frontends/qt4/QLyXKeySym.h
bit of repair here:
Index: src/frontends/qt4/ui/QAboutUi.ui
Index: src/frontends/qt4/QAbout.C
bit of cleaning here (no separate color column, but rather icon)
Index: src/frontends/qt4/QBranches.C
got rid of this altogether:
Index: src/frontends/qt4/qcoloritem.C
Index: src/frontends/qt4/qcoloritem.h
Index: src/frontends/qt4/Makefile.am
+ filedialog to qt4 one
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13805 a592a061-630c-0410-9148-cb99ea01b6c8
* insetcaption.[Ch]
(InsetCaption::draw): draw label with surrounding-float-sensitive name
and true counter number
cursorPos, metrics, edit, editXY: add
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13797 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt3/ui/moc/Makefile.am: ditto
* src/frontends/qt3/ui/*.ui: Add extra includes to the
implementation rather than the declaration
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13789 a592a061-630c-0410-9148-cb99ea01b6c8
found.
(init): read lyxrc.dist before lyxrc.defaults; remove code to read
lyxrc (LyX 1.1.5 compatibility code).
* src/encoding.C (read):
* src/language.C (read): set debug to the INFO channel.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13788 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt3/moc/Makefile.am: Add src/frontends/qt3 to includes
* src/frontends/qt3/ui/moc/Makefile.am: ditto
* src/frontends/qt3/ui/*.ui: Convert to qt3 format, no functional
change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13787 a592a061-630c-0410-9148-cb99ea01b6c8
* src/cursor.C
(LCursor::plainInsert): Move special \bigl stuff from here to
MathNestInset::interpret
(LCursor::macroModeClose): try to intepret the current macro before
it is simply inserted
* src/mathed/math_nestinset.C
(MathNestInset::doDispatch): try to intepret the argument of
LFUN_SELFINSERT also if it is longer than one character
* src/mathed/math_nestinset.[Ch]
(MathNestInset::interpret): new, moved from LCursor::plainInsert
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13786 a592a061-630c-0410-9148-cb99ea01b6c8
* src/bufferlist.C: save opened file list here, do not save slave document
* src/lyxfunc.C: not here
* src/session.[nC]: change to single file addition
* src/lyx_main.C: needed change because of single file addition
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13777 a592a061-630c-0410-9148-cb99ea01b6c8
instead of lyxrc.defaults. Simplify the check for
chkconfig.ltx.
* configure.ac: do not run lib/configure.py
* lib/doc/Makefile.am: LaTeXConfig.lyx is not generated anymore.
* lib/configure.py (removeExtraFiles): remove.
* lib/Makefile.am: no files are generated in there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13763 a592a061-630c-0410-9148-cb99ea01b6c8
(infoize2): Implement to show name if the cursor is to the right
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13757 a592a061-630c-0410-9148-cb99ea01b6c8
* src/tex2lyx/text.C
(parse_arguments): Eat space in front of required arguments
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13753 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt3/QPrefs.C, QPrefsDialog.C, ui/QPrefUIModule.ui: add two checkboxes
* src/lyxrc.C: turn off load_session by default (since we now can turn it on)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13741 a592a061-630c-0410-9148-cb99ea01b6c8
(LaTeX::scanLogFile): remove \0 characters inserted by MikTeX before
further processing
(LaTeX::deplog): likewise
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13737 a592a061-630c-0410-9148-cb99ea01b6c8
* toc.[Ch]:
- rewritten to take advantage of new TocBackend class. The toc
cache is implemented as a static variable:
static map<Buffer const *, lyx::TocBackend> toc_backend_;
* buffer_funcs.C:
updateLabels(Buffer const & buf) now calls
"lyx::toc::updateToc(buf);"
* pariterator.h: added default constructor
ParConstIterator(): DocIterator() {}
* insetfloat.C: added pit parameter to TocItem construction
* insetwrap.C: added pit parameter to TocItem construction
* MenuBackend.C: use a const ref instead of a copy of TocList
* ControlToc.[Ch]: optimisation of the API by using const reference instead of copy.
* qt4/TocPanel.[Ch]:
- optimisation of the API by using const reference instead of
copy
- directly use of TocBackend::TocIterator instead of identification by paragraph contents.
* qt4/QToc.C:
- optimisation of the API by using const reference instead of
copy
- makes use of TocBackend::Item::uid()
* qt2/QToc.C:
- use TocItem::depth() and TocItem::str() instead of public member access.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13713 a592a061-630c-0410-9148-cb99ea01b6c8
don't update the screen after saving (avoids scrolling back to
cursor)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13702 a592a061-630c-0410-9148-cb99ea01b6c8
* src/cursor.C
(LCursor::plainInsert): combine the previous math atom with the new
one to a MathBigInset if possible
* src/mathed/math_biginset.[Ch]
(MathBigInset::name): implement
(MathBigInset::isBigInsetDelim): new, test whether a given token is
a valid MathBigInset delimiter
* src/mathed/math_biginset.C
(MathBigInset::size): handle Big, Bigg and Biggg
(MathBigInset::increase): ditto
(MathBigInset::draw): fix deco drawing
(MathBigInset::write): append space if necessary
* src/mathed/math_factory.C
(createMathInset): handle l->inset == "big"
* src/mathed/math_parser.C
(Token::asInput): return a token as input, stolen from tex2lyx
(void Parser::parse1): Create a MathBigInset when needed
* src/mathed/math_support.C:
(deco_table): add lbrace and rbrace
* src/mathed/math_nestinset.C
(MathNestInset::interpret): combine the previous math atom with the
new character to a MathBigInset if possible
* src/ParagraphParameters.C
(findToken): move from here
* src/support/lstrings.[Ch]
(findToken): to here
* lib/symbols: add MathBigInset symbols
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13700 a592a061-630c-0410-9148-cb99ea01b6c8
* src/CutAndPaste.C
(resetOwnerAndChanges): rename to resetParagraph and reset the
language of ERT paragraphs, too
(copySelectionHelper): adapt to changes above
(cutSelection): ditto
(copySelection): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13699 a592a061-630c-0410-9148-cb99ea01b6c8
(BufferView::Pimpl::dispatch): prevent crash with section header
not in the main lyxtext
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13696 a592a061-630c-0410-9148-cb99ea01b6c8
* Toc.[Ch]: new function getCurrentTocItem()
* ControlToc.[Ch]: new function getCurrentTocItem()
* QToc.[Ch]: new function getCurrentIndex()
* QTocDialog.C
- QTocDialog::update() calls QToc::getCurrentIndex()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13695 a592a061-630c-0410-9148-cb99ea01b6c8
- bool ControlToc::canOutline(): new method to test if outline is possible.
* TocModel: new class
* QToc is now the controller (inheriting ControlToc directly) and the model (using TocModel)
* QTocDialog is now only the view (inheriting Dialogs::View directly)
* Dialogs.C: updated toc controller and view correspondingly
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13692 a592a061-630c-0410-9148-cb99ea01b6c8
* src/BufferView_pimpl.C
(bool BufferView::Pimpl::dispatch): update bibfiles cache after adding or
deleting a bib database
* src/buffer.C
(bool Buffer::readDocument): update bibfiles cache after the document
was read
* src/buffer.[Ch]
(void Buffer::updateBibfilesCache): new method to build or update a cached
vector with all used bibtex databases.
(void Buffer::getBibfilesCache): new method that returns the actual cache.
(Buffer * Buffer::getMasterBuffer): new (non-const) method to get the buffer
of the master document
* src/insets/insetbibtex.C
(void InsetBibtex::doDispatch): update the bibfiles cache after the inset has
been modified.
* src/insets/insetinclude.C.
(void Insetinclude::doDispatch): update the bibfiles cache after the inset
has Been modified.
* src/insets/insetinclude.[Ch]:
(void Insetinclude::updateBibfilesCache): new method to build or update
a cached vector with all used bibtex databases.
(void Insetinclude::getBibfilesCache): new method that returns the actual
cache.
* src/insets/insetcite.C
(string const getNatbibLabel): store a map of timestamps for all used bibtex
files (buffer's bibfiles cache) and rebuild the list of keys only if the timestamps
or the list of files have changed. This is the actual performance boost.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13681 a592a061-630c-0410-9148-cb99ea01b6c8
indicating if ct is used in the current buffer.
(cleanChanges): pass enum ChangeTracking.
* src/paragraph_pimpl.C (cleanChanges): delete ct marks from
paste content if ct is of in the buffer. Set content INSERTED
if ct is on (bug 2207).
* src/CutAndPaste.C (pasteSelectionHelper): pass information
about the current change tracking state to cleanChanges.
* src/paragraph_pimpl.h (cleanChanges): pass enum ChangeTracking.
* src/paragraph.C (cleanChanges): pass enum ChangeTracking.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13666 a592a061-630c-0410-9148-cb99ea01b6c8
LFUN_PASTESELECTION. Simplifies the code a lot and fixes
wrong language settings.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13665 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView_pimpl.h: delete LyXKeySymPtr typedef
* kbmap.h: include LyXKeysym.h and remove forward declaration of LyXKeySym,
and delete LyXKeySymPtr typedef
* kbsequence.h:
* frontends/WorkArea.h: delete LyXKeySymPtr typedef, include LyXKeySym.h
and don't include boost/shared_ptr.hpp, remove forward declaration of
LyXKeySym.
* frontends/LyXKeySym.h: include boost/shared_ptr.hpp, and add typedef
for LyXKeySymPtr
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13663 a592a061-630c-0410-9148-cb99ea01b6c8
(MathNestInset::doDispatch): replace recordUndo by recordUndoInset for
LFUN_DELETE, to fix undo behaviour
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13658 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/math_amsarrayinset.C
(metrics): use ArrayChanger to change the style
(draw): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13648 a592a061-630c-0410-9148-cb99ea01b6c8
In frontend/qt4/Dialog.C, we use these class like this:
} else if (name == "citation") {
QCitation * ci = new QCitation(*dialog);
dialog->setController(ci);
dialog->setView(new QCitationDialog(*dialog, ci));
dialog->bc().bp(new NoRepeatedApplyReadOnlyPolicy);
Now, it should be possible to define another view like this:
} else if (name == "citation-inline") {
QCitation * ci = new QCitation(*dialog);
dialog->setController(ci);
dialog->setView(new QCitationInline(*dialog, ci));
All the citation functionalities are not there yet but the basic ones are there. There are still a few "intelligence" still to be transfered from the view to the dialog.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13635 a592a061-630c-0410-9148-cb99ea01b6c8
* src/text3.C, src/lyxfunc.C: no special treatment of view-source dialog now.
* src/frontends/controllers/ControlViewSource.h, .C:
handle everything (get source type, code) in the controller.
* src/insets/insetbibtex.C, insetexternal.C insetinclude.C:
add dryrun mode to file copying etc.
* src/frontends/qt2/QViewSource.C: small changes when calling the controller.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13627 a592a061-630c-0410-9148-cb99ea01b6c8
Also move reponse to middle mouse from Release to Press
* math_nestinset.C
(MathNestInset::lfunMousePress): Add and convert to editXY
(MathNestInset::lfunMouseRelease): Remove
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13617 a592a061-630c-0410-9148-cb99ea01b6c8
QMathDialog.C: set icon paths
QMathUi.ui: set icon paths to lib/images/math for visual feedback in designer
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13614 a592a061-630c-0410-9148-cb99ea01b6c8
layout file in the same directory as .lyx file will be used. .cls can also
be in this directory.
* src/buffer.C, bufferparams.C: move filepath to bufferparams so this
info will be available in getToken()
* src/lyxtextclasslist.h, .C: add addTextClass() that read a .layout file
from filepath.
* src/lyxtextclass.h, .C: pass filepath to LyXTextClass::load(). .layout
file in filepath will be loaded before system ones.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13611 a592a061-630c-0410-9148-cb99ea01b6c8
* paragraph.h: make value_type point at char_type
* other files: change some bald 'char' to 'char_type'
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13609 a592a061-630c-0410-9148-cb99ea01b6c8
capitalized to have first letter lowercased.
* Adjust all affected files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13605 a592a061-630c-0410-9148-cb99ea01b6c8
letter start with a lower letter.
* All other .C and .h in the cs: adjust for above change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13603 a592a061-630c-0410-9148-cb99ea01b6c8
* text.C:
- LyXText::breakParagraph(): test if needsUpdateCounters() is enough before a full updateCounter
- LyXText::backspacePos0(): ditto
* text2.C:
- LyXText::deleteEmptyParagraphMechanism(): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13593 a592a061-630c-0410-9148-cb99ea01b6c8
QtView.C: typo in include
QPrefsDialog.C: update after changing color
QPrefsDialog.h: default parent in constructor
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13580 a592a061-630c-0410-9148-cb99ea01b6c8
- replaced the sqrt etc QPushButton with QToolButton
- modified the layout
* QMathDialog::QMathDialog
- got rid of the fixed width for function QWidgetList
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13571 a592a061-630c-0410-9148-cb99ea01b6c8
session support that
* handle recent opened files (previously lastfile)
* save/load bookmarks when quit lyx
* save/load buffer cursor location whan a file is closed
* save/load windows position and size when a file is closed
* add rc entries load_session, use_lastfilepos,
screen_geometry_height, screen_geometry_width,
screen_geometry_xysaved.
* trigger LFUN_QUIT when Alt-F4 or close-button is used to close lyx.
* remove lastfile.h lastfile.C (merged in session.h, session.C)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13561 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt2/QPrefs.C:
(internal_path_list, external_path_list): Handle the PATH prefix
style according to the user-prefs style.
(QPrefs::apply, QPrefs::update_contents): fix inverted logic of
rc.cygwin_path_fix
* src/support/os.h: New declarations to deal with PATH lists.
* src/support/os_cygwin.C: Major rewrite to account for path style
problems.
* src/support/os_unix.C:
* src/support/os_win32.C: Stub functions for PATH lists.
* src/support/environment.C: fix bug 2344: Wrong path_prefix handling
in cygwin
* src/support/filetools.C (ChangeExtension): fix for the path
style to be written in .tex files (cygwin related).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13558 a592a061-630c-0410-9148-cb99ea01b6c8
* QMathUi.ui: Port to Qt4, icons paths are hacked to point to ../lib/images/
* QMathDialog: Port to qt4
* iconpalette.C: fix cols calculation
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13557 a592a061-630c-0410-9148-cb99ea01b6c8
