There are two techniques that I know of for forcing the direction of a
string, regardlessly of whether its contents is naturally LtR, RtL or
undecided.
1/ The unicode LTR/LTR override characters. This is supposed to be the
clean way, however, it does not seem to work with Qt 5.14 (see
#11691).
2/ The undocumented QTextLayout::setFlags method. This is used
internally and allows to pass the (undocumented) flags
Qt::TextForceRightToLeft and Qt::TextForceLeftToRight. This was
used until we had issues with Qt 5.11 (see #11284).
In order to get the best of both worlds, this patch allows to enable
those two methods separately, and actually enables both at the same
time by default!
(hopefully) Fixes bug #11691.
1/ The most annoying part was the error in po/. It turns out that reading
and understanding the po/Makevars file was the key. A simple change of
variable ensures that "make dist" does not try to rebuild lyx.pot.
2/ The way tests in src/ are defined meant that the
dependency-tracking files were not all deleted. This should be OK now.
Now RenderGraphics adds offsets that depends on its parent inset.
These offsets are set to 0 for InsetGraphics and InsetExternal. A nice
consequence is that icons shown by Info inset stick out less on screen.
As an unrelated change, the "private:" specifier of these two insets
is moved to a more reasonable place.
The basic value is Inset::textOffset(BufferView*), which can in theory
change with the BufferView zoom and dpi. It is hardcoded to 4 for now.
Moreover, we introduce the virtual inset methods
(top|bottom|left|right)Offset, which can be tweaked for each inset.
No change intended (for now).
Move cursor at beginning of selection after deletion. Else backspace
operation gets stuck in a loop (tries to remove the selection again
and again).
This also fixes backspace deletion of insets with confirmDeletion() == true.
Fixes#11630
This is a reimplementation of 6d4e6aad that is both simpler and more
complete.
This uses the updateBuffer mechanism to implement a fully working
version of Inset::isChanged(). Now the function returns true for an
inset that contains an inset that contains a change, for example.
Moverover Buffer::areChangesPresent() is merely a proxy for
Buffer::inset().isChanged().
We will replace this with a better solution
For now, only keep
- Changes::isChanged()
- Buffer::areChangesPresent(), replaced by a dummy function
Next step will be to provide a working areChangesPresent() and to
compute Inset::isChanged in updateBuffer.
This reverts commit 6d4e6aad24.
Add Paragraph::isChanged() and InetText::isCgchanged() which indicate
the presence of a change in the relevant object.
Sets Row::needsChangebar() when adding an inset that contains changes.
Related to bug #8645.
This requires to add a assertion_failed_msg handler. Take this
occasion to cleanup and uniformize the various boost.cpp files that we
have.
This adds 50k line of whatever to the source code.
Fixes part of #8469
For a proper fix that works with change-reject as well as with hide
changes in output, we need to implement
ct information in tabular's row and column.
Small helper lfun that makes LyX remove the aux file before doing the
next export. A bit more convenient than removing the files manually
or restarting LyX.
If the file of an InsetInclude does not exist, loadIfNeeded will try
again and again to look for it. This is very bad for files with many
include insets, especially on windows.
Fixes bug #11656.
When used as an adjective, both variants "descendent" and
"descendant" are acceptable, but when used as a noun only
"descendant" should be used.
For a reference, see here:
https://en.wiktionary.org/wiki/descendent#Noun
This is better than making sure that the inset has exactly one cell.
In the future, inset-dissolve could be extended to dissolve all the
cells contents in the enclosing text.
Note that this check does not appear in mathed, and using dissolve in
e.g. fraction inset may lead to data loss (only current cell contents
is preserved).
We tend to have insets which buffer() member is invalid. To help
debugging, this commit paints their background in red when devel-mode
is on.
To this end, a new method develMode() is added to the Painter class.
With this commit, it is easy to see that macro template do not have a
proper buffer set!
Make InsetGrid::colAlign a normal method and make it check whether
buffer is valid before using it. This avoids crashes as we have seen
in 2.3.3 (see e.g. #11686).
There is still an assertion so that failure is noticeable before release.
Using a map would sort the elements in alphabetic ordering, which
means that when the number of elements is larger than 100, the wrong
elements get pruned.
This commit uses a list instead. Searching an item needs linear time,
but this should not be a problem for a list with less than 100
elements.
Fixes bug #10310.
Horizontal scrolling used to be taken into account when updating caret
geometry. This is wrong since it may have changed when time comes to
draw the caret. This leads to a situation where the first apparition
of the caret is at a wrong place.
Now the extra horizontal offset is used at drawing time.
Fixes bug #11603.
Rename local variables the hide other ones: get_binary_path, find_python_binary
Use unsigned int for conversion from hex using sscanf().
FileName::checksum(), parsecmd (SystemCall): use explcit values rather
than variable which value is known.
1/ When inserting an inset over a selection, it makes sense if the
selection covers a complete or several paragraphs to reset the layout of
the paragraph that contains the inset to plain layout. In general the
inner inset will have the needed layout information and it does not
make sense to keep this information outside.
However, when the inset forces plain layout, it does not make sense to
do that and the outer layout is preserved.
Some code that duplicates what is done in pasteSelectionHelper is also
removed.
2/ Similarly, when dissolving an inset, do not reset the layout of the
first paragraph if the inset was alone in its own paragraph.
Note that this does not work as intended when change tracking is enabled.
Fixes bugs #10266 and #10369.
This commit catches situations when one key in a multi-key citation
is not defined. This commit causes an error to be given, but the
name of the key that is undefined is not provided in the error
dialog.
This commit is consistent with bf99ece7.
For more information, and possible follow-up discussion (e.g., on
putting the key in the error dialog), see the following ML thread:
https://www.mail-archive.com/search?l=mid&q=20190908165644.qnz6xu5bm5eqiko6%40boogie
When a selection spans more than one line, we now check for whether
there is a change at one position after the last position of each
fully selected line.
This fixes#11629.
More complicated than I wished for, but color handling in RTL is
particularly tricky.
The three versions are needed due to the differences between [pdf]latex,
xetex, luatex/luabidi and luatex/babel.
The reader of CREDITS (GuiAbout.cpp) now ignores lines that start
with the number sign (#). This commit also introduces a commented
out header in CREDITS reminding any potential editor that all
changes will be overwritten by generate_contributions.py.
Graphics "height" is only the height above the baseline and thus not
what most people will expect. Also, using height can result in a
division by zero with rotation.
Use totalheight now since this means "height of the figure" (independent
of the baseline).
The custom options field can be used if height is really desired.
We handle this in conversion/reversion, respectively, so document
output will not change.
Hence, file format change.
Fixes: #9676
This is a modern implementation of endnotes building on LaTeX3 tools which
gets away with deficiencies of the endnotes package, has some extra features,
is localized, supports hyperref and is better customizable.
As this is a fairly new package requiring l3, we keep the old endnotes
module and provide this as an alternative.
This allows to support classes that don't use the Xpaper wording.
Add support for KOMA font (keyval) syntax on top of that.
Also support class-specific font and paper sizes in tex2lyx.
File and layout format change.
The provided working directory was not properly set when the underlying
process starts.
It is not clear, why only this one call to one.startscript()
needs fixing. OTOH, the other calls do not use 'Systemcall::DontWait'
as the first parameter.
When the cursor in RTL text, icons for "depth-increment" or
"layout-toggle Enumerate" look wrong.
To fix this, the lfun "bidi" is introduced. "bidi ltr func" behaves
like "func" in LTR text, but is unknown in RTL text. "bidi rtl" does
the opposite. This allows to add two icons, but only have one icon
available. When no document is available, only LTR is assumed.
To make this work, the handling of unknown functions in toolbar has
been changed so this these functions can change dynamically their
existence.
The icon themes `default', `oxygen' and `classic' have been updated
accordingly.
Fixes bug #4451.
In particular, the directory frontends/qt4 is renamed to frontends/qt.
Many configurations file have to be updated. All mentions of qt4 in
the source have been audited, and changed to qt if necessary.
The only part that has not been updated is the CMake build system.
By default, the behavior is the same as before, except that the
language of new document is not unconditionally en_US anymore.
The new checkbox "Respect OS keyboard language" (off by default)
governs this behavior.
Update prefs format to 30.
Instead of setting language from context when moving the cursor, set
it to the OS input language. This behavior will probably need to be
controlled by a preference, since not everybody changes keyboard
mapping when changing language.
This required to move BufferView::setCursorLanguage to
Cursor::setLanguageFromInput().
This bug provides two features:
1/ when a new document is created the language is set to the current
keyboard language.
2/ when keyboard is switched at OS level, the input language of
current window is changed. The language is set preferably to one of
those of the document. Ex. if the keyboard changes to en_GB but one
is typing a document in US English and Hebrew, then US English will
be selected rather that adding UK English to the list.
The implementation depends a lot on Qt. The platform status is :
* working on Windows 10
* not working with Linux (although 1/ works with Qt4); it seems that
Qt5 supports switching through ibus, but I do not know what this
means.
* not yet tested on macOS.
This addresses bugs #6450, #6247 and somehow #10514.
This is done to ensure that numbering never overlaps equations. The
result can be different according to the bufferview, which is why
RowInfo::offset is now a std:map.
Remaing issues (how bad are theese ?):
- the numbering is considered too large when it overlaps the inset
rect, whereas one could consider the width if the current row
instead.
- previews may need to be adapted similarly to fit the whole screen width
This is the first (easiest) step in fixing bugs 10668 and 11333.
The numbering is now drawn outside of the insets, which solves the
alignment problems and make editing easier.
What does not work yet:
- long labels will overwrite equations. To fix this, we need to
implement the same algorithm as LaTeX and put labels on their own
row when required.
- previews may need to be adapted similarly to fit the whole screen width
It is not a good idea to call caretPosAndHeight when the caret is in a
paragraph that is not in cached metrics. This can happen when not
using "cursor follows scrollbar".
This commit refactor things a bit so that testing is done in
BufferView.
This bug is not in 2.3.x.
Like with macOS, the Wayland compositor seems to require a
backingstore when doing partial updates like we do.
This extends the mechanism that has been introduced for macOS. This
has to be done at run time, not compile time.
LyX follows LaTeX in dropping support for this combination
(it only worked by tricking "inputenc.sty").
There is no known case where this combination is required or helpfull.
For power users with special needs, XeTeX + TeX fonts is still
available after setting the input encoding to "ascii" or "utf8-plain".
See also #10600.
This revives a patch by Uwe and extends it. Additional options to font
packages/fontspec can now be entered in Document Settings.
This is principally also true for TeX fonts, if the new TeXFont tag
MoreOptions is set. For the time being, I have only done this for
MinionPro, as a model and prove of concept.
Note that adding more TeXFonts requires a file format change,
respectively, and changes to tex2lyx (in the same way as I've done for
MinionPro).
This addresses #8226
This is a higher-level (non-TeX) font interface of babel that draws on,
but is supposed to be used rather than, fontspec with babel and XeTeX/
LuaTeX.
File format change.
Addresses: #11614
See the discussion. The decision was just to keep re-trying for a
bit, since the lock preventing us from removing the old file seems
to clear after a bit.
