This fixes on-screen appearance of things like code with lines longer
than the window width.
The TeXbook makes it clear by indicating that \fontdimen3 == 0 for
these fonts.
The test that was used to avoid breaking a string that was followed
by a too long element was not correct (especially the part that
compared with total row width).
Typical example here is:
- a word with a part that has a font change like /un/breakable;
- a longish sentence after it.
Use a new test that is good enough for this particular case, although
with sortcomings. I do not want to overcomplicate and prefer to wait
for other complaints (this code is already more complicated that I
would like).
Document known shortcoming.
Fix ticket #12660.
Instead of actually fixing the messiness of InsetInfo, let's just fix
the symptom and avoid the access to Paragraph::id() that was crashing
LyX every time updateBuffer/validate/metrics/draw did not happen in
the right order.
Fixes bug #12639.
After removing/adding rows, the corresponding equation numbers in
the LyX display were not updated (although if you clicked outside
the math inset they were).
Now they are updated immediately after the operation.
Parts, chapters and sections have different LabelTypes, but this does
not mean they cannot be transformed into each other while doing
OUTLINE_IN/OUT
Not sure why the labeltype check is here anyway, but let's keep it.
This is my 635th lesson that trying to be too clever is not that good.
This change interferes with the yet-to-come fix to #12674.
This reverts commit cc6dae1363.
When computing the width of the button, some code has been added in
04ece4f0 to shorten the space in LeftButton geometry. It turns out
that the Left/Top-button-ness is not always known at this point (since
it depends on the width itself!).
Therefore, it is better to make the button narrower also in the
TopButton case.
See the thread
2.4 Crash (was: Updated LaTeXConfig.lyx (bxjsclasses added))
on lyx-devel (26/01/2023).
The backtrace imply a problem like:
1/ metrics are computed for some info inset
2/ the info inset is regenerated (and thus the paragraph it held is now invalid)
3/ We draw the inset and because of the new (disabled by default)
bookmark display code, we access the id() of the invalid paragraph.
4/ boom!
To fix the issue, introduce a new boolean member that indicates when
the Row object of the metrics should not be used. In this case, the
draw() method returns early.
Typically there are two sources of spacing:
* the button has two pixels added to the left and to the right
* the frame around the text also has 2 pixels to the left and to the right
Note that this value of two pixels is given here for simplicity, but
these are parameterized by methods like textOffset or leftOffset.
What we want to remove is the space after the button and the space
before the frame. This is done in 3 places
In dimensionCollapsed(), the extra space is removed from the dimension
after its computation
In metrics(), the space avoided before the frame is removed from width.
In draw, the whome text inset is drawn with a negative offset.
Fixes#12335.
This commit had had an additional not documented change: redraws
happen only when they are needed. This did not help fix the bug, but
looked smart on first sight. Alas, I find that these smart changes
added because "why not?" tend to come back to haunt me eventually.
In particular this case, the problem was that the code tested whether
the offset of anchor paragraph had changed, but not whether the
paragraph itself had changed. This means that, when switching from one
section to another with the outliner, the view was not updated.
Fix the following warning:
src/frontends/qt/GuiDocument.h:377:7: error: 'eventFilter' overrides a member function but is not marked 'override' [-Werror,-Winconsistent-missing-override]
bool eventFilter(QObject * sender, QEvent * event);
^
/usr/include/x86_64-linux-gnu/qt5/QtCore/qobject.h:139:18: note: overridden virtual function is here
virtual bool eventFilter(QObject *watched, QEvent *event);
^
Amends 62413580de.
If `havetable == true`, a lot of the code didn't make any sense: in particular, it was outputting a level of <m:mrow> too many.
Also, add some comments and rewrite the comment about mlabeledtr.
Contributed by lynx: https://www.lyx.org/trac/ticket/12629
This was:
../../master/src/mathed/InsetMathBox.cpp:116:20: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::__cxx11::basic_string<wchar_t> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
116 | for (int i = 0; i < parts.size(); i += 2) {
| ~~^~~~~~~~~~~~~~
../../master/src/mathed/InsetMathBox.cpp:120:20: warning: comparison of integer expressions of different signedness: ‘std::vector<std::__cxx11::basic_string<wchar_t> >::size_type’ {aka ‘long unsigned int’} and ‘int’ [-Wsign-compare]
Error noticed by Coverity:
*** CID 382777: Memory - illegal accesses (RETURN_LOCAL)
/home/lasgoutt/src/lyx/coverity/lyx/src/insets/InsetIndex.cpp: 1866 in _ZNK3lyx15InsetPrintIndex5xhtmlB5cxx11ERNS_9XMLStreamERKNS_12OutputParamsE()
1860
1861 // Collect the index entries in a form we can use them.
1862 vector<IndexEntry> entries;
1863 const docstring & indexType = params().getParamOr("type", from_ascii("idx"));
1864 for (const TocItem& item : *toc) {
1865 const auto* inset = static_cast<const InsetIndex*>(&(item.dit().inset()));
>>> CID 382777: Memory - illegal accesses (RETURN_LOCAL)
>>> Using "indexType", which points to an out-of-scope temporary variable of type "lyx::docstring const".
1866 if (item.isOutput() && inset->params().index == indexType)
1867 entries.emplace_back(IndexEntry{inset, &op});
1868 }
1869
1870 // If all the index entries are in notes or not displayed, get out sooner.
1871 if (entries.empty())
Rationales:
- previously, <mstyle> was used, but it's being deprecated for MathML 4 Core in favour of CSS and <mrow> (not a big deal in itself)
- the whole box cannot be hosted within the same tag, because neither <mstyle> nor <mrow> can have text, they need an intermediate container, <mtext> (which cannot hold anything else that pure text)
- new behaviour: always output a container for the whole box that has the right attributes, i.e. an <mrow>; split the content of the cell to have text and other tags set apart (text in <mtext>, other tags left as they were)
Old behaviour, invalid MathML (2 to 4):
<mstyle XXX>text<mn>.</mn></mstyle>
New behaviour, valid MathML:
<mrow XXX><mtext>text</mtext><mn>.</mn></mrow>
The inset represents text (as opposed to maths in formulae). <m:mstyle> is used to give style to its children, it is not supposed to have any contents on its own.
Instead of asserting when there are unprocessed row elements (which,
as I understand it, should almost never happen), play safe and keep
them for later processing.
Related to bug #12617.
- present appropriate alert message in case of missing Python
- add the option to quit LyX immediately
- recheck for Python interpreter on reconfigure if it was missing
Warning was as follows:
src/tex2lyx/Parser.cpp:898:39: error: adding 'uint32_t' (aka 'unsigned int') to a string does not append to the string [-Werror,-Wstring-plus-int]
warning_message("ignoring a char: " + static_cast<uint32_t>(c));
~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
src/tex2lyx/Parser.cpp:898:39: note: use array indexing to silence this warning
warning_message("ignoring a char: " + static_cast<uint32_t>(c));
^
& [ ]
1 error generated.
First and foremost, this patch implements the latest best practices in C++ (i.e. comparison operators are not member functions).
The main objective of this rewrite is to have these operators callable in slightly more general contexts (*this->asFontTag() == *rhs.asFontTag() yielded an error because no member function could be called). This feature is no more required.
The rewrite took place in the context of https://www.lyx.org/trac/ticket/12585. The first iteration was using more complex code to circumvent XMLStream in DocBook (see details in the bug above and in the mailing list), while this one uses XMLStream fully. The bug was due to font tags being considered equal when they were not, due to the comparison done only on the XML tag and not on the actual font change (XML attributes can complement the tag for various font changes).
The new parameter allows more flexibility when encoding some elements that have a poor mapping in DocBook, like theorems. The major use is to wrap the environment in a generic container, figure, which requires a title (but none is available).
* disambiguate "Other" label
* Add accelerator
* Add tooltip to "Other" widget
* Amend tooltip of "Web" widget (since "other" now seems to have taken
part of its function)
Missing return in `specialCharKindToXMLEntity`. Previously, the
functions that were merged into `specialCharKindToXMLEntity` did not
return any kind of error in case an unknown special character is met
(enumerated value). This behaviour is preserved.
This is a new take on c8e2c17a that was reverted at da67bde61a due to entities no more recognised by the browsers. Corresponding thread on the mailing list: https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg213179.html
This patch is a huge cleanup overall, by removing the distinction between HTML and XML entities (the latter arrived due to the DocBook support).
In InsetListingParams, I also changed the mechanism that relied on " to use an XML entity to be consistent with the rest of the code, mostly in case someone looks for HTML entities and wonders why they are still there.
Also, perform the URL fixing magic for DocBook and XHTML.
As it was, it was impossible to enter e.g. "tel:" type links. Now
choosing the "Other" type just outputs the URL as given.
Also, the addition of "http" or "file" was not being done for
DocBook and XHTML. Now it is.
This adds a warning icon to either the tab header or the panel stack
entry item if a widget on the panel/stack has invalid content.
Particularly helpful to get aware of such content on other tabs/panes
than the one currently selected.
Before, there was always a space after the tag, even when there were no attributes. Now, the space is output conditionally, so that the output makes more sense.
Before, one space too many for the tag name (title), casting doubt on whether the code had this space hard coded or not:
<!-- Output Error: Unrecognised tag type 'para' for 'title ' -->
After, no such space:
<!-- Output Error: Unrecognised tag type 'para' for 'title' -->
Remove some special cases that I do not really understand and
streamline the cases.
Also make sure that there is only one code path for centering.
Fixes bug #12491.
Instead of having to add and individually test the versions to check
for, we store the current version and test on that with a specific
function isAvailableAtLeastFrom(package, year, month, day)
Currently only used for the LaTeX version, but could also be extended
for package versions.
If the main language does not require the inputenc package, but a
secondary language does, inputenc needs to be loaded as well
(without options)
Also simplify the code a bit.
- new function to list bibtex databases
- citation-insert returns the list of undefined keys
if the request comes from the LyX server
Original patch from Benjamin Piwowarski (2012!).
Modified and updated by Riki Heck and myself.
File switches with documents are done via \inputencoding.
Other than with fontenc, these do not need to be laoded via options
beforehand.
Also, out current code loaded the additional languages' encoding last,
which might result in wrong encoding settings.
This restores the previous behavior of runCommand().
When the child process could not be properly terminated the
error "RunCommand: could not terminate child process" was being
issued. However, in fb7b7e52 there was a misinterpretation
between this condition and the exit status of the child and
these two different errors were mixed up. They are now
disentangled again.
Apostrophes were being converted inside code-like areas, like LilyPond insets. This patch fixes tests that started to fail:
Processing `./60/lily-95ee389a.ly'
Parsing...
././60/lily-95ee389a.ly:7:12: error: undefined character or shorthand: &
\relative c
’’ { g a b c}
This is similar to what LaTeX does in its output.
See the (long) discussion in ticket #11244. Port of ad3e6c69b2 for DocBook.
This patch requires delaying entire strings instead of just characters, so that the DocBook code path can be as similar to the XHTML one as possible.
Instead of specifying "force" to disable the deletion protection
mechanism, invert the default so that "confirm" is needed to activate
it. The idea is to keep the lfun reasonable for scripting and add a
special argument for interactive use.
Document in release notes.
Update LFUN.lyx documentation
Update bind files.
Add conversion step to prefs2prefs_lfun.py.
Remove all trace of Qt4 support. The different elements have been
considered carefully before removal.
The only changes that need to be done concern Windows and macOS
compilation instruction and will need to be taken care of by the
respective maintainers before prerelease.
The file TODO.killqt4 lists what remains to be done.
This macros are important for particle physicists. Note that the
package hepparticles as distributed in recent texlive does not work
(see #11804) and need to be patched. This is however not something we
can do, and any physicist wanting to use this will have patched his
own version I guess.
I contacted Andy Buckley, the author of the package, who answered that
he is aware of the issue but does not have time right now to fix it.
The workaround is straightforward: on line 176 of hepparticles.sty,
replace "\updefault" by "n".
Two parts:
- add *lots* of definitions to lib/symbols
- add hepparticles and hepnames as simple features in LaTeXFeatures.
The definitions are courtesy of @renyhp, and extracted from the
aforemented packages:
https://www.ctan.org/pkg/hepparticleshttps://www.ctan.org/pkg/hepnames
Fixes bug #11804.
We now allow the user to cancel the background process at any point
(via the red "x" in the status bar or Document > Cancel Export), so
we do not need to poll the user with the dialog.
The patch works by setting timeout to "-1" which is treated as a
special value to disable the poll.
Fix (by obviation) #12531 and #9953, which were about the dialog.
An export can be canceled by clicking on the status bar icon or by
executing export-cancel (e.g., via Document > Cancel Background
Process).
The centralized code kills the script and updates the status bar
icons.
No change in functionality intended.
Related commits: 70a71a82 and 01abab9a.
This is consistent with 70a71a82 (which is about the code path
through clicking on the 'x' status bar icon).
In the next commit I'll make a function to centralize this sequence
of killing a script and emitting the scriptKilled() signal.
Removing. M-c e has a different meaning nowadays
(tabular-feature delete-vline-left)
Please file a new report with an updated description if this is still
an issue.
LyX removes a single backslash when it is inserted in a
macro name by the keyboard. However if it is followed by
another character before moving the cursor, it is retained
causing an assertion (bug #12601).
Disable the arguments append-column and delete-column of tabular-features.
The code is taken from InsetMathCases, with some changes
* no need to record undo here
* in dispatch, return is prefered to break, since we do not want to invoke
InsetMathGrid::doDispatch.
Propagate these changes to InsetMathCases.
Cleanup of the InsetMathCases error messages to fit with other parts
of the code.
The handling of tabular-features in mathed needs to be unified somehow.
Based on a commit from lynx <lorenzobertini97@gmail.com>
Part of bug #12590.
Qt >= 5 refuses to display them. We work around this in lib/symbols
already, but make sure we do not try to display math glyphs at these
code points anyway.
Fixes bug #8493.
Backslashes are not allowed in macro names and LyX
enforces this by not allowing entering them by keyboard.
However, it was possible to paste them and this may cause
crashes (see bug #12596).
The previous code explicitly disabled it and this behaviour caused problems (like "A&A" being output as-is, which is wrong in HTML: it should be "A&A").
Qt4 code has been identidifed by
git grep -l 'QT_VERSION.*\(0x050000\|0x04\)' src
Uses of QT_VERSION_CHECK have been checked too.
been used to remember what places need further work.
Then remaining Qt4 references have been searched using
git grep -i qt4
git grep -i 'qt 4'
and relevant issues have been either fixed or noted in the new
TODO.killqt4 file.
It appears that gcc 4.9 does not implement the following part of C++11:
https://cplusplus.github.io/CWG/issues/1148.html
Therefore, we have to use a special case in C++11 mode that does an
explicit std:move.
With recent compilers (gcc >= 9), this leads in C++11 mode to a warning:
MetricsInfo.cpp: In member function ‘lyx::Changer lyx::MetricsBase::changeFontSet(const string&)’:
../../master/src/MetricsInfo.cpp:83:13: warning: redundant move in return statement [-Wredundant-move]
83 | return move(rc);
| ~~~~^~~~
MetricsInfo.cpp:83:13: note: remove ‘std::move’ call
Partly reverts commit fff28c57.
This branch improves handling of spaces on display (see #10117):
* caret is correctly shown in the middle of double spaces in justified rows;
* sequence spaces are correctly shown at the end of rows before
automatic row breaks.
Moreover, this branch:
* streamlines the code that handles spaces in row breaking
* improves display in Qt4 : although the improvements outlined above
are not present in Qt4 for monospaced fonts, some dsplay glitches
are resolved.
* improves performance for very long paragraphs (#12598).
When is it detected that our zero-width characters are not really
zero-width, avoid to use them altogether. Currently, this is known to
happen in Qt4 with monospace fonts.
This allow to remove the special Qt4 code in breaskString_helper.
Related to bug #10117.
This allows to create a new version that takes an already built
TextLayoutHelper struct as parameter.
No intended change.
See discussion in bug #10117.
In order to work around the Qt row breaking algorithm, which considers
multiple spaces as one at QTextLine break, we insert word_joiner unicode
characters beteween each pair of spaces.
The TextLayoutHelper class makes it easy to handle that.
Update Row::Element::rtrim() to only remove one space at row end.
Update support::countExpanders() to count all spaces, without special
handling for consecutive ones.
Fixes bug #10117.
This new code allows to get rid of some hardcoded stuff and will be a
foundation for handling of consecutive spaces.
This code can be used in the future for getTextLayout, x2pos, and
pos2x in order to streamline code. Actually some features as the naked
parameter are here to prepare for this second set of changes.
No change intended. The modified code is much clearer, though.
Related to bug #10117.
When there is no module, the old code would invoke tex2lyx with option
-m
instead of
-m ""
and an error would ensue.
This is because the QProcess command line parser used in Systemcall is
broken and does not recognize empty parameters as such. The solution
is to rewrite our parsecmd() parser to generate a list of parameters.
This is post-2.4.0 work.
The workaround used here is:
- set the list of modules to "," when it should be empty. In effect,
this is a list of two empty modules.
- change tex2lyx to accept empty module names and ignore them; this is
good in terms of robustness anyway.
Additionally, when there is no receiving buffer, set the defaults as
the BufferParams defaults instead of empty (this is cleaner, but
should not make a difference in practice).
In the long term, we should switch to use the QStringList-based API of
QProcess in Systemcall (see QTBUG-80640).
This is a convenience function for indexing. It adds a copy of the
index inset under cursor after any word in the buffer that is equal
(case-insensitively) to the word preceding the index inset.
The function can be easily used to generate bad indexes (and I warn
about that in the UserGuide), but if used with care, it can also be
extremely convenient.
Previously, only the suggestions starting with the current input were
shown.
Contains the following minor improvements:
- Add space to indicate when only one suggestion is found
- Select first item in suggestion-list in order to make selecting with
arrow keys more intuitive
- Fix selection with Shift+Up/Down in text-field
Fix for bug #12572.
The new function inset-insert-copy can only be invoked from the ToC.
It is currently only implemented for Index inset.
It is a special lfun because Inset::dispatch is called directly from
the ToC widget with cursor pointing to the inset, whereas the patch
happens in the workarea at caret position. This function cannot be
called directly.
Add an entry for this function in the toc context menu.
Fixes bug #4582.
The change ensures that the function is not seen by the compiler when
the debug mode is not enabled. The flag is not set by default, because
it might have a significant performance impact for large indices.
The reason for the flag is that the default configuration under Linux
forbids the definition of unused functions.
**WARNING; only compilation has been ested; even that does not work**
The goal of this commit is to use the list-based API to
QProcess::start, to avoid annoying syntax issues (see issues with
pasting from LaTeX).
* Create a new latexEnvironment() in filetools.h that returns a
map<string, string> containing the variables and their values.
* Rewrite parsecmd() so that it returns a QStringList of tokenized parameters.
* Use this in startProcess. This is the part is is not finished yet.
Obviously, this will not be possible to get right for 2.4.0.
This reverts commit 008a0825e8.
This commit was part of bug #12310. The goal was to remove the
selection when using "up" at the start of selection (so that the
cursor cannot move). Unfortunately, it creates navigation issues for
insets inside tabulars.
Since the fix was minor, the safest decision is to revert.
The part of ticket #12310 that resets selection with
char-forwars/backward when moving is not possible still works.
Fixes bug #12593.
This quashes a new warning in clang++ 15, when std::move() (the
one-parameter version) is used as simply move(). There is a strong
recommendation from WG21 to avoid that.
Details here: https://reviews.llvm.org/D119670
It might be that we should not use that many move()s. I am not
competent to decide on that.
I also used this occasion to get rid of a spacial casing for C++11
that does not seem necessary after all.
Being able to insert completion in a read-only document is definitely
a bad idea.
This patch acts both on indication of completion and on insertion
itself.
Fixes bug #12582.
I mathed, undo should record the underlying inset on completion,
whereas in test recording the paragraph is enough.
Therefore the recordUndo() in GuiCompleter::tab is removed, and the
relevant recordUndo/recordUndoInset are used at the right places.
As a further cleanup, the parameter `finished' of
Text::insertCompletion is removed as it is useless.
Fixes bug #12581.
This amends [4a7a1935/lyxgit]. Before 4a7a1935 it was assumed
that a labeled row was also numbered. Hence, when unnumbering
a row a label was also deleted. We now have to do this explicitly.
From Kornel:
> /usr2/src/lyx/lyx-git/src/Paragraph.cpp:1931:1: warning: control reaches end of non-void
> function [-Wreturn-type]
>
> This is with gcc-12, compiled in debug mode.
With a string like "abc def [inset]", it should be possible to break
between the "def" and the inset. A case of interest is when "abc def "
is too long, but "abc def" is not.
To this end, tweak the test that look whether breaking was successful:
the right width to look at is nscp_width, the width without the final
space.
The only goal is to improve code readability: this enum class is strictly equivalent to a Boolean, with the same meaning as the previous is_xhtml arguments (arbitrary choice).
In several range-based for loops, implicit copies are made. Remove
that when possible, and try to shut converity up otherwise.
Fixes issues found by coverity.
- Check the state of the synchronize TeX output option of the document to enable or disable the LFUN for forward-search.
- write synctex macro to TeX source not only for PdfLaTeX
When unbinding a shortcut, it may happen that the exact definition of
the request is not known. A typical example it Tab, which is bound to
a complex command sequence.
In this case it is convenient to use the syntax
\unbind "Tab" "*"
To make this word, the special "*" value is translated to the
FuncRequest::unknown lfun and this value is considered specially in
several places.
This code was triggering the following warnings:
src/mathed/InsetMathHull.cpp:234:15: error: variable 'counters_to_save' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
const char * counters_to_save[] = {"section", "chapter"};
^
src/mathed/InsetMathHull.cpp:235:21: error: unused variable 'numcnts' [-Werror,-Wunused-const-variable]
unsigned int const numcnts = sizeof(counters_to_save)/sizeof(char *);
The original code was put in at 645f9fdf (and the comment at 8a226ec4).
This commit amends a65e12d6.
Time will tell whether this is too expensive (because most equations
after this on will change too, unless equations are numbered by
section).
Related to bug #11535.
This patch simplifies and fixes the generation of previews with
numbering. Instead of saving the counter values (which is complicated
and error prone), the \thequation macro is set to the numbers_ string
which has been computed by updateBuffer for screen display.
Harcoding the number in the formula means that two equations with
different numbers have different previews, which is the subject of the
bug.
The special code for saving counters in updateBuffer and outputing
them in preparePreview from 645f9fdf (ticket #6894) is removed and
replaced by this simpler approach.
This fixes ticket #11535.
The module subequation allows to number equations in the "Subfigure"
inset to be numbered (1a), (1b), (1c), etc.
To implement this on screen, we need to redefine temporarily the
"equation" counter to use this different numbering.
To this end, implement Counters::copy method that can be used to
backup full counter definitions.
Fixes bug #12567.
This patch simplifies and fixes the generation of previews with
numbering. Instead of saving the counter values (which is complicated
and error prone), the \thequation macro is set to the numbers_ string
which has been computed by updateBuffer for screen display.
Harcoding the number in the formula means that two equations with
different numbers have different previews, which is the subject of the
bug.
The special code for saving counters in updateBuffer and putputing
them in preparePreview from 645f9fdf (ticket #6894) is removed and
replaced by this simpler approach.
This fixes ticket #11535.
The module subequation allows to number equations in the "Subfigure"
inset to be numbered (1a), (1b), (1c), etc.
To implement this on screen, we need to redefine temporarily the
"equation" counter to use this different numbering.
To this end, implement Counters::copy method that can be used to
backup full counter definitions.
Fixes bug #12567.
The layout from the paste content is adopted only if
- the paragraph is empty (ie. empty after the selection has been
erased) and Standard or Plain Layout, or
- empty and multiple lines are pasted, or
- multiple lines are pasted at the beginning of a paragraph
As for what other applications do:
- MS Word decides the adoption of a layout depending on whether the end of line
character is copied
- Libre Writer adopts the paste content layout only if the paragraph is empty
(otherwise it makes *all* pasted paragraph the target layout)
In LyX, as in Libre Writer, one cannot copy the end of line character by
selecting a single line. However, the Libre Writer solution is problematic
because one always has to make sure that a paragraph is in Standard layout if
one wants to paste several lines with their source layout. The implemented
behaviour differs from Libre Writer in that the source format is kept when end
of line characters are pasted, i.e. several lines are pasted, and hence does
what MS Word does in that situation.
Fix for bug #11023: Copy and paste from one list into another often leads to
undesired result.
Introduce the new FileName method ensureExtension, which does the following:
* if the extension is already correct (in a case-insensitive way), do nothing.
* if it is not correct, add the extension to the file name.
This is different from changeExtension that will fail in a case where
the file contains dots, but not a real extension, like newfile2.1.
Use this new method in renameBuffer() and exportBufferAs().
Fixes bug #11008.
This requires to add a parameter to GuiToolbar::addItem so that it is
possble to make a difference between toolbar buttons and menu items.
The long-term solution is to rely on the menu backend for such things.
Fixes bug #12004.
There are several small parts that are needed here:
* Implement LayoutModuleList::asString() that returns a comma-separated
list of modules.
* in Converter::convert(), handle the new tokens $$c for the current
textclass and $$m for the list of modules.
* in Buffer::importFile(), pass the current buffer as parameter instead
of nullptr.
* in pasteClipboardText(), copy the parameters of the current buffer to
the internal one used for importation, so that the textclass and
modules information is available to convert().
* finally, modify configure.py to pass "-c $$c -m $$m" to tex2lyx for
the latexclipoard->lyx converter.
Fixes bug #11312.
In Advanced Find and Replace, Tab can be used to move the focus from
Search field to the replace field. This is inconvenient when Tab has
another use, like completion.
To fix this, check that the function bound to Tab is disabled before switching focus.
The same is done for BackTab.
Fixes bug #11114.
The removal of duplicates is done in LastCommandsSection::add and uses
the erase-remove idiom for performance.
Most of the patch is a cleanup of GuiCommandBuffer:
* remove history_ member, that was a copy of the session lastcommands
vector. Use instead a wrapper history() around it and a addHistory
wrapper for adding new entries.
* Make sure that there is only one place where commands are added to
history. The code used to maintain a list for interactive editing,
and a list for saving the session. They could be different in terms
of leading/trailing spaces.
* [unrelated] remove command_ member, which is just a copy of
LyXAction list of commmands. Use directly lyxaction instead.
In mathed it is assumed that a labeled line is also implicitly numbered.
However, latex allows to label an equation without numbering it.
The label is then assigned the value of a nearby numbered one.
This commit drops the above mathed assumption in order to allow to import
valid latex code with a labeled but not numbered equation line.
The screen representation omits the line number and encloses the label
in square brackets for further differentiation. However, it is still not
possible to label an equation without numbering it using the GUI.
The aliases are defined by a file in the (system or user) image
directory. The format is pretty simple: each line is like
<str1> <str2>
Where every instance of <str1> will be replaced with <str2>.
Fixes bug #12509.
Adding this particular line created bad redraw interactions. See
thread on lyx-devel here:
https://marc.info/?l=lyx-devel&m=165648365808777&w=2
The code is reorganized a bit:
- the part of updateGUI() that (en|dis)abled elements is not moved to
updateBottons ; the rest is renamed updateWorkAreas()
- only updateButtons is called now in eventFilter
- finally the recursion curse is fixed now in updateWorkAreas() by
setting the old_buffer value _before_ calling copy_params. This
avoid recursion if some bad update were to happen again.
When changing the document class, the message "Converting document to
new document class..." is shown in minibuffer. This message leads to
weird GUI update interactions with the FindAndReplace panel, and
ultimately infinite loops. It would only be useful if the conversion
took a long time.
See this thread for rreference:
https://marc.info/?l=lyx-devel&m=165648365808777&w=2
Therefore, just remove it.
This important part is the last point, the rest is what is needed to
make it happen.
* implement (FindAndReplace|FindAndReplaceWidget)::hasWorkArea, that
tell whether a work area is own by the advanced find & replace
widget.
* factor out method find() from GuiView::findOrBuild.
* implement GuiView::hasVisibleWorkArea, that tells whether a workarea
is visible in the view (current tab in a split or adv. f&r
workarea).
* Finally, in TocWidget::sendDispatch, change the current workarea
temporarily to the document workarea before dispatching the
function. The code tries to be as careful as possible to handle all
cases. The future will tell whether it is good enough.
When the commit string from the inputMethodEvent can be interpreted as
characters bound to some action, dispatch this action instead of
inserting the string.
This is useful on an international keyboard, when diaresis+space gives
a plain double quote. It is better in this case to enter a smart
quote.
Adapted from a patch from Daniel Ramoeller <d.lyx@web.de>.
Fixes bug #10377.
Fix for bug #12547.
- "Interword" becomes "Normal"
- "Protected" becomes "Non-Breaking"
Plus a minor fixes to the "Horizontal Space Settings" dialog:
- Indicate that when "Non-Breaking" is disabled, the space will be non-breaking
In FindAdv we use Qt to interpret regular expressions.
Regex uses for instance '\w', '\d' etc.
'\d' finds not just '0-9' but also e.g. '߂' (Nko Digit Two: U+07c2)
'\w' includes also such numbers.
ATM, only FindAdv uses this function.
In this case we skip the undesired word-characters before starting the search.
There are still some inconsistencies between LyX and Qt of 'what counts as a word-character',
but too hard to resolve.
Since the element 'match_len' in class MatchResult is an integer,
the check 'if (!match(...).match_len))' is changed to
'if (match(...).match_len) <= 0)'
1.) The type of variable at_begin changes from bool to enum matchType
true -> MatchStringAdv::MatchFromStart,
false -> MatchStringAdv::MatchAnyPlace
2.) discard default parameter-values of
MatchStringAdv::operator()
MatchStringAdv::findAux()
1.) Changed arrays dept and closes to vector-type because of runtime error in UserGuide.lyx
with a big paragraph (size > 8900 chars) contained too many opening parentheses
2.) Removed one creation 'textcyrillic'-key because it is later anyway created
3.) Most important (thanks to Scott who found the failure)
Move the check if the found string really is part of MATH to
the relevant place.
Without this change the search using 'Search only in maths' will fail miserably.
When implementing multi-row string breaking, an extra createLine()
statement, which made sense in the original code, was kept by mistake.
This basically made the mechanism ineffective, because it created one
row with the correct length, plus a second one with all the remaining
text, which would have to be itself broken. This went undetected
because the display is still correct.
Additionally, this issue polluted the break cache to the extent that
the hit rate could be 0%.
Together, these two effects created a major slowdown with a document
containing a single ~30000 characters paragraph.
Fixes bug #12534.
When toggleFree is called without a selection, the only result is to
change the cursor currentfont.
In the other cases (selection or implicit selection), we want to reset
the cursor font from the text font.
Fixes bug #12518.
To handle this case, we use '\lyxdollar' string instead.
Also try to handle '\n' in the docstring directly instead in the
string already converted to utf8.
(The utf8-version is still there, but commented out)
If the searched area contains deleted parts, there may be more closing
as opening parentheses in latex output. We have to remove them before
further processing.
Using the new inline statements
find_effective(), find_with_non_output(), find_with_deleted(),
find_set_feature(), find_add_feature() and find_clean_features()
makes the code a slightly better readable.
This lfun (like several others) does not work with multicell
selection. Disable the lfun in this this case for now, until a nice
solution is found.
Fixes bug #12530.
Also fix a thinko in interpreting the found values.
The match_len describes the length of the second regex field,
while matchend is the length of the search field 0.
This happens when the cursor goes into a deeper inset, since
selectWord() was called on the wrong Text object.
Additionally, fix the new word selection when cursor goes before
existing selection.
Fixes bug #12529.
DocBook comes in another commit, as the modifications are not required to keep the code compilable.
A semicolon is no more used between an index term and the places it appears, because some languages need a space before it and others not: this wasn't handled at all. With a dash, this problem disappears.
We are removing leading values from the start of string, so
the size of removed data was wrong because s.find() could find
a position inside the leading part.
Problem occured if
1.) not using regex and
2.) search without format and
3.) the search pattern ended with '}'.
then this last char '}' in the search pattern was discarded.
With the debug-level 'find' there are now less output.
The original output can be received now with debig-level 'findverbose'
Also constructions like
LYXERR(Debug::FIND|Debug::FINDVERBOSE, "...");
are now possible.
This adds native macros for subindexes (!level), |see and |seealso
as well as native support for ranges |( |) and pagination format
-- e.g., |textbf -- via the index dialog
Resolves#12478, #7232 and #5014
The feature is complete (incl. tex2lyx) except for
* file format change and lyx2lyx
* docbook/xhtml
* documentation
1/ put cusror in some display inset
2/ use shift-left until the cursor exits the inset
3/ see how the selection extends on the right.
This is not really a selection drawing bug, but rather the fact that
the anchor will be normalized to the first position after the inset,
which is in the next row.
This can be avoided by using the boundary property.
See discussion in bug #12520.
Difficult to decide, when to remove the sequence '%\n'.
The sequence is OK for latex output as a command separator,
but must be removed in searched string.
Alas, not all occurences are wrong. Sigh.
It is not a good idea to contruct a QChar from a char_type that is
really 32bits.
Use lyx::isSpace, which already catters for this case.
Since this code does not depend on qt anymore, move it to
support::countExpanders.
Get rid of Row::countSeparators, which is not used anymore.
Fixes bug #12519.
The functionality was mentioned, but it seems worth it to give the
command explicitly, so it is seen how "Branch:<branch name>" is used
to refer to the specific branch with name <branch name>.
Additionally, tweak a phrase in doc for buffer-forall.
In some situation the macros are not used with their unicode
representation. For instance all greek characters are used
as \alpha, \beta, ... in the latex output.
For the search it is more convenient to use the corresponding UTF-8 codes.
Wrong behaviour before this commit:
Open new lyx-file
insert
unicode-insert 0x025c 0x1d08
Open adv-find dialog
search for unicode 0x025c OK
search for unicode 0x1d08 OK
search with regex for unicode 0x025c OK
search with regex for unicode 0x1d08 ==> NOT OK (because we are searching for \textrevepsilon
and this was mapped to 0x025c
Fixes bug reported here:
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg217265.html
1. Start a new document.
2. Start a math inset and inside put "1+2".
3. Put the cursor to the right of "+".
4. Press <Shift> + L three times. This will select the entire math inset
(as expected).
5. Press <Shift> + R.
Before 503c7c16, the selection inside the math inset was preserved.
After 503c7c16, it is lost.
The problem is that InsetMathNest does too much for our needs and
resets the anchor (why, I do not know). Therefore, it is better to
duplicate the code.
These are just annoying. Note that the language mark cannot currently
be specified in a layout file, but it is not clear that there is a
need for that. Therefore I used the simple and hackish way.
This is actually a generic InsetInfo issue:
1/ the contents of the inset is computed in updateBuffer, so that it
is available for drawing but also for latex output (think batch
export). When it is called, it deletes the existing inner paragraph
and replaces it by a new one
2/ metrics build a new Row object that represents to paragraph
3/ draw() relies on this information
Now, imagine that updateBuffer() is called after metrics(). This can
happen for many reasons, and does happen here (display a shortcut info
and change the shortcut file from cua to emacs).
This problem has been here forever, but is only visible now that the
(experimental) bookmark display code needs to read the underlying
paragraph id.
The solution is to compute the inset contents at metrics time. This
is done by moving the relevant code to a new standalone build() method
that is called in metrics() but also in latex().
