The is a fixup to commit 611df441. It seems that the wrong unicode
property was selected. It could be that both classes should be used.
Fixes bug #11900.
Add new RowFlags value CanBreakAfter, which says that the row can be
broken after the inset if needed. There is no CanBreakBefore yet,
because I do not know of an inset that needs it.
This makes screen closer to the actual behavior of insets.
Currently, only unprotected spaces and some special characters are
concerned. There may be more that need this handling.
Fixes bug #11621.
The enum DisplayType is replaced with the flags RowFlags that can be
combined. Here is the correspondence between the old DisplayType and
the new Inset::RowFlags:
DisplayType RowFLags Meaning
Inline Inline plain inline inset
-- BreakBefore row ends before this inset
-- BreakAfter the row ends after this inset
AlignCenter Display the inset is centered on its own row
AlignLeft Display | AlignLeft the inset is left-aligned on its row
AlignRight Display | AlignRight the inset is right-aligned on its row
-- RowAfter an extra row is needed after this inset
Display is just a shortcut for BreakBefore | BreakAfter.
The flags for the newline inset will be BreakAfter | RowAfter,
while the separator inset will just use BreakAfter.
This groundwork does not introduce any new feature at this point. It
aims to remve the numerous isNewLine and isSeparator all over the
code, and to eventually optional break after some insets like spaces
(see #11621).
Most display() methods are renamed to rowFlags(). Some are removed
because they returned Inline.
Now display() is only a helper function for hull insets.
Fix paragraph id in xHTML output to the pre-refactoring status.
Tested on math manual (plus minus nonessential newlines).
Slightly modified patch from Thibaut Cuvelier.
Return early when format is unknown. I am not sure whether this is
supposed to happen and whether we should assert on this condition.
Spotted by coverity.
This commit adds the mathed command \mathds that selects a
font more appropriate than \mathbb for typesetting the
mathematical symbols for the natural (N), whole numbers (Z),
rational numbers (Q), real numbers (R), complex numbers (C),
and some others.
As in the \mathbb case, only capital letters are supported,
but in addition one can also typeset a symbol often used for
representing the indicator function (\mathds{1}) and the
letters a, h, k.
Fixes bug #11887.
It turns out that the resources were mostly not used anyway. Removing
them shrinks LyX binary by ~6MB.
Only autotools have been adapted. cmake will require the same
simplification.
The automatic icons for "command-alternative", "math-insert",
"math-(big)delim" and "command" can be overriden by an explicit icon
name.
Besides that, the iconName function is refactored, and now returns an
additional bool that indicates whether the icon should be flipped.
The code that uses resources is still useless. This will be the
subject of further work.
74540c98 was a fixup of d207e85c, which avoided using inset background
as inset label background.
d207e85c introduced a background under inset labels to avoid fake bold
effect.
Hopefully, this last variation will be the right one !
This is a modern alternative for makeindex that is fully unicode-aware
and written in lua.
As opposed to xindy, it is more lightweight and actively maintained.
The program is still in a rather early stage of development, so we do
not propose this as default.
This relies on xindex 0.22 (about to be released) to function properly.
Due to a hint from Scott:
> I don't think it should be printed to LYXERR0. That goes to the terminal
> for the user. Even our lyx2lyx tests fail if they detect any information
> printed to the terminal (although we escape some warnings). If "find" is
> not a good debug level for it, maybe we can put it in "info" (the first
> debug level)?
It seems that the use of zoom in determining the size of the minimal
value was a bad idea.
It still think that the situation is not very satisfying, we need a new idea.
The code was checking only for particular vertical alignment requests
in order to decide to nest a standard array into a 1x1 ams matrix.
However, also vertical lines are not possible in ams matrices.
These uses are inefficient (a loop really) and require that pit_type
is ptrdiff_t.
Instead, RandomAccesslist::constIterator is renamed to iterator_at and
a version adding a non-const iterator is added. Additionally, the
method retirns end() when position is equal to the size of the
container (see #11861).
lyx::next and lyx::prev are removed, and std::prev is used in the few
places where the code requires it (for no good reason IMO).
These uses are inefficient (a loop really) and require that pit_type
is ptrdiff_t.
Instead, RandomAccesslist::constIterator is renamed to iterator_at and
a version adding a non-const iterator is added.
lyx::next and lyx::prev are removed, and std::prev is used in the few
places where the code requires it (for no good reason IMO).
Before, we would continually set the selection to the empty string,
to maintain ownership. This causes problems with clipboard managers
GPaste and CopyQ. Further, in theory this should have better
performance since checking ownership should be faster than setting.
A disadvantage of this change is that the timestamp of the selection
will be old at this point in the code. However, when the selection
is requested, we put the selection contents at that point so the
selection timestamp should be accurate then. Further, the selection
contents are not accurate at this point in the code (they are just
the empty string), so it is not clear whether having an accurate
timestamp is beneficial.
Fixes#11715.
This inset allows counters to be set, reset, saved, restored, etc,
both in the LyX GUI and in the output; optionally, the effect can be
limited to the GUI. Of course, LaTeX provides means for doing all of
these things, so they could previously be done with ERT, as far as
the output is concerned. But there was no mechanism for manipulating
counters in the GUI and none for other output formats.
Keep track of nested includes and just refuse to re-enter a file
we're already in the process of handling.
There's a question whether we should do this in updateBuffer and
validate, or whether we should do it separately. For now, this seems
to work.
Other than issuing a warning on the console, now the LyX window is
raised when in single-instance mode and no files to load are specified.
In this way, the user is aware that something happened after double
clicking the program icon. To support this functionality the new lfun
window-raise has been introduced.
Actually the change is affecting only builds if
1.) Using cmake build
2.) on unix
To use it on
cygwin: one has to patch development/cygwin/lyxrc.dist.in
MacOSX: -//- development/MacOSX/lyxrc.dist.in
We need also a Windows-version
Also the compilation with automake lacks the handling of development/unix/lyxrc.dist.in
Most of the RtL icons that we provide are simply mirrors of the LtR ones.
Therefore let the code do that by default if no +rtl icon is found.
The only RtL icon left for now is for "layout Enumerate" (notice the
numbers in it).
Also remove useless getPixmap wrapper and several old bidi_xxx icons
that were forgotten in previous patch.
When the cursor in RTL text, icons for "depth-increment" or
"layout-toggle Enumerate" look wrong.
Instead of relying on the clumsy "bidi" lfun of 2898c335, this new
version relies on a new Toobar tag BidiItem that inserts an action
which can have two icons, depending on the direction of the paragraph
containing the caret (or of the direction of the UI when no file is
open).
The alternative icon has the same name as the original one, with a
"+rtl" string appended to the lfun string. The alternative icon is
only active if the file is found. The icon themes `default', `oxygen'
and `classic' have been updated accordingly.
Fixes bug #4451.
This should work on Windows, but needs test.
The changes (namely the installation directory for the dtl executables)
for automake are not yet done. (JMarc?)
It may fix bug #11325 if cmake configured with '-DLYX_EXTERNAL_DTL=OFF'
After commit 6a936d63, the helpful debug message tries to display
non-existing elements and crashes the program :(
Fix by radical simplification of the message.
Part of bug #11777.
The ^ is interpretted as bitwise XOR, so 2^(20) evaluated to 22.
Thanks to Riki for the << trick. This way, we do not have to use
pow() and include the <cmath> header for this one expression.
As a consequence of fix e64ea357 to ticket #10797, we draw a bit too
much of the inset background outside of the inset (visible for insets
with colored background). #10797 is a ticket that triggers when the
cursor has a width larger than 1.
This patch limits the problems in two respects
* nothing is done on the left, since the cursor width only expands on
the right.
* on the right, the extra width is limited to cursor width.
Fixes bug #11786.
There is a chance that this code is still useful for Qt 4. We keep
it around just in case.
For the case of Qt 4, this commit restores the code changed in
f8e40f8a, d255339a, and d4ff3a29.
This reverts commit 438f15da21.
Revert "Track whether we have warned about mixing layouts across e.g. branches."
This reverts commit 861c6167ca.
Revert "Track whether title has been issued via OutputParams."
This reverts commit b536759c07.
There are massive complications here, and I don't have time to fix them all
right now.
Use QFontMetrics::boundingRect() instead. QFontMetrics::width() does
not actually calculate the width of the bounding box and is mostly
useful for knowing where to draw text after a string, taking into
account bearings. Indeed, it has been renamed to
QFontMetrics::horizontalAdvance().
For the code touched in this commit, we want to center a string.
Either method would likely be fine, but it is more easy to
understand exactly what QFontMetrics::boundingRect() does.
This commit does change functionality, although it should not be
noticeable.
Setting the family to "family" is already attempted above. A
different case was adapted to be this duplicate case at d4ff3a29,
but it should have just been removed.
Spotted by Enrico.
This commit fixes the following warning from Qt 5.14:
error: ‘void QTreeWidgetItem::setTextColor(int, const QColor&)’ is deprecated: Use QTreeWidgetItem::setForeground() instead [-Werror=deprecated-declarations]
setForeground was introduced in Qt 4.2 [1].
We have a couple of commented out uses of a setTextColor() method in
GuiDocument.cpp, but the QTextEdit::setTextColor() is not deprecated so no
change is needed.
[1] https://doc.qt.io/archives/qt-4.8/qtreewidgetitem.html#setForeground
This commit fixes a few warnings from Qt 5.14 like the following
one:
error: ‘void QComboBox::setAutoCompletion(bool)’ is deprecated: Use setCompleter() instead. [-Werror=deprecated-declarations]
We only generated setAutoCompletion() from setting the property in
the .ui files. There does not seem to be a .ui file property that
generates setCompleter(). However, the default in both Qt5 [1] and
Qt4 [2] is to enable case-insensitive autocompletion, which seems to
be the same type of autocompletion as when we were relying on
setAutoCompletion(true). Thus, we can remove the properties that set
autocomplete to true. There is only one file, SearchUi.ui, where we
were turning off the autocompletion; we now do so using
setCompleter(0) in GuiSearch::GuiSearch().
[1] https://doc.qt.io/qt-5/qcombobox.html#setCompleter
[2] https://doc.qt.io/archives/qt-4.8/qcombobox.html#setCompleter
When branches are used in the title, we may need to track whether
we've issued the title across branch insets. So we put the relevant
variables into OutputParams.
This commit fixes a couple of warnings from Qt 5.14 like the
following one:
error: ‘int QTime::restart()’ is deprecated: Use QElapsedTimer instead [-Werror=deprecated-declarations]
This commit changes two uses of QTime to QElapsedTimer, one used
only when the "files" debug flag is set, and the other for timing
whether a script (e.g., knitr) takes longer than a certain amount of
time to run.
QElapsedTimer is superior for these two use cases in that it uses a
monotonic clock if possible, and is thus more robust to certain
changes (e.g., daylight savings changes) [1]. Similarly, the commit
in Qt Base that makes this deprecation [2] mentions the following in
the commit message:
QElapsedTimer does the job better and without the DST kludges.
Note that QElapsedTimer class was introduced in Qt 4.7, so no
conditioning on Qt version is necessary.
Not all methods of QTime are deprecated and we still use some of
the non-deprecated methods in our code (e.g., to get the current
wall clock time in GuiProgress::currentTime()).
[1] https://doc.qt.io/qt-5/qelapsedtimer.html
[2] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=ed99a591a83a399458f12341d0a1c0b3152f247a
Thus a document can be viewed if it contains references to
its master, children or siblings that are being excluded via includeonly,
or viewed standalone if it contains references to its master or siblings.
Using a dialog may trigger a redraw at times where the metrics caches
have not been updated yet. To fix this, do as in paintEvent() and
abort caret blinking if there is an open undo group.
Move the decision to skip the caret painting to showCaret(), closer to
where real work happens. hideCaret () is now an alias for
showCaret(false), which allows some code refactoring.
See also commit c7496a11b2.
Fixes bug #11763 (although it does not trigger on master).
This is a mode for includeonly handling that is effective and still outputs
at least mostly correct counters and references. This is intended for non-
final editing work.
File format change.
GuiInclude::initialiseParams() calls InsetCommand::string2params()
which calls InsetCommandParams::clear(), however this last function
did not reset the special "preview_" parameter. Now this parameter
is reset to false as part of clear().
The ParamData class documents (see InsetCommandParams.h) the
following:
// No parameter may be named "preview", because that is a required
// flag for all commands.
Thus, we must handle preview_ separately from the other parameters.
This commit fixes#11779.
First, we do not need to run bibtex/biber on the maintenance run, as
the necessary references will be generated on the includeonly run.
Second, exclude the master from DepTable in maintenance run, as the
master is re-checked in any case in the includeonly run, and as it will
always be detected as changed due to the \includeonly statement, which
will trigger a complete build.
More improvements to follow.
There is no need to change the cursor's position to the beginning of
the line.
This change does not affect the behavior of using the buttons in the
Outliner pane, but is useful for using the keyboard shortcuts.
Fix warnings coming from deprecations of QTextEdit::tabStopWidth()
and QFontMetrics::width(). Regarding tabStopWidth(), the ChangeLog
states the following [1]:
Introduced tabStopDistance property in QTextOption, QTextEdit and
QPlainTextEdit as replacement for the inconsistently named tabStop and
tabStopWidth properties. QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth are now deprecated.
Note that QFontMetrics::horizontalAdvance() is what we want here, as
opposed to QFontMetrics::boundingRect(), because we want to know
where to draw the next character after the tab.
[1] https://code.qt.io/cgit/qt/qtbase.git/tree/dist/changes-5.10.0/?h=v5.10.0
Fix the following warning from Qt 5.14.1:
error: ‘static bool QPixmapCache::find(const QString&, QPixmap&)’ is deprecated: Use bool find(const QString &, QPixmap*) instead [-Werror=deprecated-declarations]
Fix the following warning from Qt 5.14.1:
error: ‘static QList<T> QList<T>::fromSet(const QSet<T>&) [with T = QString]’ is deprecated: Use QList<T>(set.begin(), set.end()) instead. [-Werror=deprecated-declarations]
Regarding QList::fromSet(), the documentation now states the
following [1]:
Since Qt 5.14, range constructors are available for Qt's generic
container classes and should be used in place of this method.
[1] https://doc.qt.io/qt-5/qlist.html
Fix the following warning:
error: ‘void QFileDialog::setConfirmOverwrite(bool)’ is deprecated: Use setOption(DontConfirmOverwrite, !enabled) instead [-Werror=deprecated-declarations]
Note in the change that "false" changes to "true" because the option
is *Dont*ConfirmOverwrite.
QFileDialog::setConfirmOverwrite() is obsolete at least since 4.8
and QFileDialog::setOption() is available since 4.5 [1].
[1] https://doc.qt.io/archives/qt-4.8/qfiledialog-obsolete.html
[2] https://doc.qt.io/qt-5/qfiledialog.html#setOption
Fixes the following warning:
error: ‘void QWidget::getContentsMargins(int*, int*, int*, int*) const’ is deprecated: use contentsMargins() [-Werror=deprecated-declarations]
The new code also has advantages in that 'l' can be set to const and
it is more readable because it is clear that only 'l' is used.
QWidget::getContentsMargins() was deprecated in 5.14.0 [1]. and
QWidget::contentsMargins() is available since 4.6 [2].
[1] https://code.qt.io/cgit/qt/qtbase.git/tree/dist/changes-5.14.0/?h=v5.14.0
[2] https://doc.qt.io/archives/qt-4.8/qlayout.html#contentsMargins
This commit replaces qSort with std::sort to fix warnings from compiling with
Qt 5.14.1. Below is one of the warnings:
error: ‘void qSort(RandomAccessIterator, RandomAccessIterator, LessThan) [with RandomAccessIterator = QList<lyx::ColorCode>::iterator; LessT$
an = bool (*)(lyx::ColorCode, lyx::ColorCode)]’ is deprecated: Use std::sort [-Werror=deprecated-declarations]
qSort() has been deprecated since Qt 5.2. Quoting from the ChangeLog [1]:
With STL no longer being optional for building and using Qt, a number of
parts of QtAlgorithms no longer make sense, and have therefore been
deprecated. Replacements are available in the STL, and generally have
much better performance
There are some cases that require more than just a trivial substitution, but
our code does not appear to use any of those cases.
For some discussion on the differences in speed of std::sort() and
qSort(), see the following:
https://phabricator.kde.org/D10857
These are just warnings now, but will likely be errors with Qt 6:
https://bugreports.qt.io/browse/QTBUG-73048
I tested that LyX can still be built against Qt 4.8.7 with this commit.
This commit follows 24926b2e, which also fixes some deprecation warnings.
[1]
https://code.qt.io/cgit/qt/qtbase.git/tree/dist/changes-5.2.0/?h=v5.2.0
These changes fix a few instances of the following type of warning:
error: ‘void QListWidget::setItemSelected(const QListWidgetItem*, bool)’ is deprecated: Use QListWidgetItem::setSelected() instead [-Werror=deprecated-declarations]
as well as similar warnings for setItemHidden() and
setItemExpanded(). These are just warnings now, but it is planned to
remove the methods for Qt 6:
https://bugreports.qt.io/browse/QTBUG-73048
I tested that LyX can still be built against Qt 4.8.7 with this
commit. Indeed, these methods have been deprecated for a while (it
is just that QT_DEPRECATED_WARNINGS was only turned on by default
starting with 5.13.0). See, e.g.,
https://doc.qt.io/archives/qt-4.7/qlistwidget-obsolete.html
Using a dialog may trigger a redraw at times where the metrics caches
have not been updated yet. To fix this, do as in paintEvent() and
abort caret blinking if there is an open undo group.
Move the decision to skip the caret painting to showCaret(), closer to
where real work happens. hideCaret () is now an alias for
showCaret(false), which allows some code refactoring.
See also commit c7496a11b2.
Fixes bug #11763 (although it does not trigger on master).
I've long wondered why dialogs seem to update twice when it seems
they just need to update once. It seems it was this code. But it
was only put there to deal with a problem with code in the button
controllers that was disabled in 2007! So I'm going to try removing
it. If we start seeing weird behavior with dialogs in master, then
this will be why.
The above mentionned patch did paint the background of the sublabel to
avoid "bold-like" effect. However the correct backgound color is the
row's one, not the inset's one.
The realPath() implementation on Windows works only for files and
not for directories. By using an API available starting from Vista
it is possible to fix it in a simple way.
I also took into account using the Qt QFileInfo::canonicalFilePath(),
but it turns out to not work when a path component is a junction
(tested with Qt 5.14.1).
Due to this, it is not possible compiling or using LyX on Windows
versions earlier than Vista.
In case of path names for external files containing symbolic links the real path
and the logical path name may be different for the same file or directory.
LyX is using QDir::tempPath() to create the path name of the temporary directory.
The Qt implementation is free to return the logical or the real path name here and
it happens to be different for various platforms and versions.
The most stable and clean solution is to use the real path name consistently.
As the xcb_send_event man page [1] states,
In order to properly initialize these bytes, we allocate 32 bytes
even though we only need less for an xcb_configure_notify_event_t
This commit fixes the following Valgrind error, which could be
triggered by selecting a letter in LyX:
==12698== Syscall param writev(vector[...]) points to uninitialised byte(s)
==12698== at 0x61F578D: __writev (writev.c:26)
==12698== by 0x61F578D: writev (writev.c:24)
==12698== by 0x4A83BFC: ??? (in /usr/lib/x86_64-linux-gnu/libxcb.so.1.1.0)
==12698== by 0x4A83FD0: ??? (in /usr/lib/x86_64-linux-gnu/libxcb.so.1.1.0)
==12698== by 0x4A84246: ??? (in /usr/lib/x86_64-linux-gnu/libxcb.so.1.1.0)
==12698== by 0x4A84ACB: xcb_flush (in /usr/lib/x86_64-linux-gnu/libxcb.so.1.1.0)
==12698== by 0x17C8F06: lyx::frontend::GuiApplication::nativeEventFilter(QByteArray const&, void*, long*) (GuiApplication.cpp:3366)
==12698== by 0x5AA4EEE: QAbstractEventDispatcher::filterNativeEvent(QByteArray const&, void*, long*) (qabstracteventdispatcher.cpp:484)
[1] https://www.x.org/releases/current/doc/man/man3/xcb_send_event.3.xhtml
/cvs/lyx/lyx-devel/src/frontends/qt/TocModel.cpp:356: warning: loop variable 'toc' has type 'const pair<std::string, shared_ptr<lyx::Toc> > &' (aka 'const pair<basic_string<char>, shared_ptr<vector<lyx::TocItem> > > &') but is initialized with type 'const std::pair<const std::__cxx11::basic_string<char>, std::shared_ptr<std::vector<lyx::TocItem, std::allocator<lyx::TocItem> > > >' resulting in a copy
/cvs/lyx/lyx-devel/src/frontends/qt/TocModel.cpp:356: use non-reference type 'pair<std::string, shared_ptr<lyx::Toc> >' (aka 'pair<basic_string<char>, shared_ptr<vector<lyx::TocItem> > >') to keep the copy or type 'const std::pair<const std::__cxx11::basic_string<char>, std::shared_ptr<std::vector<lyx::TocItem, std::allocator<lyx::TocItem> > > > &' to prevent copying
Easier just to use 'auto'.
There are two techniques that I know of for forcing the direction of a
string, regardlessly of whether its contents is naturally LtR, RtL or
undecided.
1/ The unicode LTR/LTR override characters. This is supposed to be the
clean way, however, it does not seem to work with Qt 5.14 (see
#11691).
2/ The undocumented QTextLayout::setFlags method. This is used
internally and allows to pass the (undocumented) flags
Qt::TextForceRightToLeft and Qt::TextForceLeftToRight. This was
used until we had issues with Qt 5.11 (see #11284).
In order to get the best of both worlds, this patch allows to enable
those two methods separately, and actually enables both at the same
time by default!
(hopefully) Fixes bug #11691.
1/ The most annoying part was the error in po/. It turns out that reading
and understanding the po/Makevars file was the key. A simple change of
variable ensures that "make dist" does not try to rebuild lyx.pot.
2/ The way tests in src/ are defined meant that the
dependency-tracking files were not all deleted. This should be OK now.
Now RenderGraphics adds offsets that depends on its parent inset.
These offsets are set to 0 for InsetGraphics and InsetExternal. A nice
consequence is that icons shown by Info inset stick out less on screen.
As an unrelated change, the "private:" specifier of these two insets
is moved to a more reasonable place.
The basic value is Inset::textOffset(BufferView*), which can in theory
change with the BufferView zoom and dpi. It is hardcoded to 4 for now.
Moreover, we introduce the virtual inset methods
(top|bottom|left|right)Offset, which can be tweaked for each inset.
No change intended (for now).
Move cursor at beginning of selection after deletion. Else backspace
operation gets stuck in a loop (tries to remove the selection again
and again).
This also fixes backspace deletion of insets with confirmDeletion() == true.
Fixes#11630
This is a reimplementation of 6d4e6aad that is both simpler and more
complete.
This uses the updateBuffer mechanism to implement a fully working
version of Inset::isChanged(). Now the function returns true for an
inset that contains an inset that contains a change, for example.
Moverover Buffer::areChangesPresent() is merely a proxy for
Buffer::inset().isChanged().
We will replace this with a better solution
For now, only keep
- Changes::isChanged()
- Buffer::areChangesPresent(), replaced by a dummy function
Next step will be to provide a working areChangesPresent() and to
compute Inset::isChanged in updateBuffer.
This reverts commit 6d4e6aad24.
Add Paragraph::isChanged() and InetText::isCgchanged() which indicate
the presence of a change in the relevant object.
Sets Row::needsChangebar() when adding an inset that contains changes.
Related to bug #8645.
This requires to add a assertion_failed_msg handler. Take this
occasion to cleanup and uniformize the various boost.cpp files that we
have.
This adds 50k line of whatever to the source code.
Fixes part of #8469
For a proper fix that works with change-reject as well as with hide
changes in output, we need to implement
ct information in tabular's row and column.
Small helper lfun that makes LyX remove the aux file before doing the
next export. A bit more convenient than removing the files manually
or restarting LyX.
If the file of an InsetInclude does not exist, loadIfNeeded will try
again and again to look for it. This is very bad for files with many
include insets, especially on windows.
Fixes bug #11656.
When used as an adjective, both variants "descendent" and
"descendant" are acceptable, but when used as a noun only
"descendant" should be used.
For a reference, see here:
https://en.wiktionary.org/wiki/descendent#Noun
This is better than making sure that the inset has exactly one cell.
In the future, inset-dissolve could be extended to dissolve all the
cells contents in the enclosing text.
Note that this check does not appear in mathed, and using dissolve in
e.g. fraction inset may lead to data loss (only current cell contents
is preserved).
We tend to have insets which buffer() member is invalid. To help
debugging, this commit paints their background in red when devel-mode
is on.
To this end, a new method develMode() is added to the Painter class.
With this commit, it is easy to see that macro template do not have a
proper buffer set!
Make InsetGrid::colAlign a normal method and make it check whether
buffer is valid before using it. This avoids crashes as we have seen
in 2.3.3 (see e.g. #11686).
There is still an assertion so that failure is noticeable before release.
Using a map would sort the elements in alphabetic ordering, which
means that when the number of elements is larger than 100, the wrong
elements get pruned.
This commit uses a list instead. Searching an item needs linear time,
but this should not be a problem for a list with less than 100
elements.
Fixes bug #10310.
Horizontal scrolling used to be taken into account when updating caret
geometry. This is wrong since it may have changed when time comes to
draw the caret. This leads to a situation where the first apparition
of the caret is at a wrong place.
Now the extra horizontal offset is used at drawing time.
Fixes bug #11603.
Rename local variables the hide other ones: get_binary_path, find_python_binary
Use unsigned int for conversion from hex using sscanf().
FileName::checksum(), parsecmd (SystemCall): use explcit values rather
than variable which value is known.
1/ When inserting an inset over a selection, it makes sense if the
selection covers a complete or several paragraphs to reset the layout of
the paragraph that contains the inset to plain layout. In general the
inner inset will have the needed layout information and it does not
make sense to keep this information outside.
However, when the inset forces plain layout, it does not make sense to
do that and the outer layout is preserved.
Some code that duplicates what is done in pasteSelectionHelper is also
removed.
2/ Similarly, when dissolving an inset, do not reset the layout of the
first paragraph if the inset was alone in its own paragraph.
Note that this does not work as intended when change tracking is enabled.
Fixes bugs #10266 and #10369.
This commit catches situations when one key in a multi-key citation
is not defined. This commit causes an error to be given, but the
name of the key that is undefined is not provided in the error
dialog.
This commit is consistent with bf99ece7.
For more information, and possible follow-up discussion (e.g., on
putting the key in the error dialog), see the following ML thread:
https://www.mail-archive.com/search?l=mid&q=20190908165644.qnz6xu5bm5eqiko6%40boogie
When a selection spans more than one line, we now check for whether
there is a change at one position after the last position of each
fully selected line.
This fixes#11629.
More complicated than I wished for, but color handling in RTL is
particularly tricky.
The three versions are needed due to the differences between [pdf]latex,
xetex, luatex/luabidi and luatex/babel.
The reader of CREDITS (GuiAbout.cpp) now ignores lines that start
with the number sign (#). This commit also introduces a commented
out header in CREDITS reminding any potential editor that all
changes will be overwritten by generate_contributions.py.
Graphics "height" is only the height above the baseline and thus not
what most people will expect. Also, using height can result in a
division by zero with rotation.
Use totalheight now since this means "height of the figure" (independent
of the baseline).
The custom options field can be used if height is really desired.
We handle this in conversion/reversion, respectively, so document
output will not change.
Hence, file format change.
Fixes: #9676
This is a modern implementation of endnotes building on LaTeX3 tools which
gets away with deficiencies of the endnotes package, has some extra features,
is localized, supports hyperref and is better customizable.
As this is a fairly new package requiring l3, we keep the old endnotes
module and provide this as an alternative.
This allows to support classes that don't use the Xpaper wording.
Add support for KOMA font (keyval) syntax on top of that.
Also support class-specific font and paper sizes in tex2lyx.
File and layout format change.
The provided working directory was not properly set when the underlying
process starts.
It is not clear, why only this one call to one.startscript()
needs fixing. OTOH, the other calls do not use 'Systemcall::DontWait'
as the first parameter.
When the cursor in RTL text, icons for "depth-increment" or
"layout-toggle Enumerate" look wrong.
To fix this, the lfun "bidi" is introduced. "bidi ltr func" behaves
like "func" in LTR text, but is unknown in RTL text. "bidi rtl" does
the opposite. This allows to add two icons, but only have one icon
available. When no document is available, only LTR is assumed.
To make this work, the handling of unknown functions in toolbar has
been changed so this these functions can change dynamically their
existence.
The icon themes `default', `oxygen' and `classic' have been updated
accordingly.
Fixes bug #4451.
In particular, the directory frontends/qt4 is renamed to frontends/qt.
Many configurations file have to be updated. All mentions of qt4 in
the source have been audited, and changed to qt if necessary.
The only part that has not been updated is the CMake build system.
By default, the behavior is the same as before, except that the
language of new document is not unconditionally en_US anymore.
The new checkbox "Respect OS keyboard language" (off by default)
governs this behavior.
Update prefs format to 30.
Instead of setting language from context when moving the cursor, set
it to the OS input language. This behavior will probably need to be
controlled by a preference, since not everybody changes keyboard
mapping when changing language.
This required to move BufferView::setCursorLanguage to
Cursor::setLanguageFromInput().
This bug provides two features:
1/ when a new document is created the language is set to the current
keyboard language.
2/ when keyboard is switched at OS level, the input language of
current window is changed. The language is set preferably to one of
those of the document. Ex. if the keyboard changes to en_GB but one
is typing a document in US English and Hebrew, then US English will
be selected rather that adding UK English to the list.
The implementation depends a lot on Qt. The platform status is :
* working on Windows 10
* not working with Linux (although 1/ works with Qt4); it seems that
Qt5 supports switching through ibus, but I do not know what this
means.
* not yet tested on macOS.
This addresses bugs #6450, #6247 and somehow #10514.
This is done to ensure that numbering never overlaps equations. The
result can be different according to the bufferview, which is why
RowInfo::offset is now a std:map.
Remaing issues (how bad are theese ?):
- the numbering is considered too large when it overlaps the inset
rect, whereas one could consider the width if the current row
instead.
- previews may need to be adapted similarly to fit the whole screen width
This is the first (easiest) step in fixing bugs 10668 and 11333.
The numbering is now drawn outside of the insets, which solves the
alignment problems and make editing easier.
What does not work yet:
- long labels will overwrite equations. To fix this, we need to
implement the same algorithm as LaTeX and put labels on their own
row when required.
- previews may need to be adapted similarly to fit the whole screen width
It is not a good idea to call caretPosAndHeight when the caret is in a
paragraph that is not in cached metrics. This can happen when not
using "cursor follows scrollbar".
This commit refactor things a bit so that testing is done in
BufferView.
This bug is not in 2.3.x.
Like with macOS, the Wayland compositor seems to require a
backingstore when doing partial updates like we do.
This extends the mechanism that has been introduced for macOS. This
has to be done at run time, not compile time.
LyX follows LaTeX in dropping support for this combination
(it only worked by tricking "inputenc.sty").
There is no known case where this combination is required or helpfull.
For power users with special needs, XeTeX + TeX fonts is still
available after setting the input encoding to "ascii" or "utf8-plain".
See also #10600.
This revives a patch by Uwe and extends it. Additional options to font
packages/fontspec can now be entered in Document Settings.
This is principally also true for TeX fonts, if the new TeXFont tag
MoreOptions is set. For the time being, I have only done this for
MinionPro, as a model and prove of concept.
Note that adding more TeXFonts requires a file format change,
respectively, and changes to tex2lyx (in the same way as I've done for
MinionPro).
This addresses #8226
This is a higher-level (non-TeX) font interface of babel that draws on,
but is supposed to be used rather than, fontspec with babel and XeTeX/
LuaTeX.
File format change.
Addresses: #11614
See the discussion. The decision was just to keep re-trying for a
bit, since the lock preventing us from removing the old file seems
to clear after a bit.
Place autocorrect at the top of `InsetMathNest::interpretChar`,
ensuring that any autocorrections that trigger on special characters
(such as '^' or '~') work. In particular, you can now make an
autocorrection from "<~" to "\preceq"!
With non-TeX fonts, the \inputencoding setting is overridden
by "utf8-plain" (pass-through). Keeping the old value allows
switching back to TeX fonts without the need to (re)set
the input encoding.
Also change back the GUI name of the "auto-legacy" setting
(cf. #11115).
The culprit here is the constructor QString(QByteArray const &): in
Qt4, it would interpret the byte array as latin1, and in Qt5 as utf8.
Therefore it is safer to use explicitly QString::fromUtf8 instead of
this constructor.
Several places where additionally simplified, in order to avoid some
extra conversions.
Ensure the default encoding "utf8" comes always first,
followed by other common variants.
The encodings were sorted based on the GUI name which leads to
the default setting moving from the top position in some localizations.
The warning about unneeded std::move can be solved by conditioning on
C++14 mode.
The warnings about deprecated copy is harder, so we disable it for
now. We will be able to fix our part, but Qt triggers it a lot too.
python23_call: determines if the binary given is appropriate and adds the necessary calling options
find_python_binary: get a list of candidates and choose the right one using python23_call
python: returns the name of the python interpreter that can be found on PATH, using find_python_binary
Now we report these in the same way as LaTeX errors (but let the user to
see the result anyway). It remains to be shown much is this disturbing
to users. Generally, ignoring these is not a good idea, because they are
harder to manually spot in longer documents.
The details of reported error varies because log linebreaks at 90
induced by pdflatex make log harder to parse.
The committed code is more robust than previous, in which some missing
cits/refs with long keys would go unnoticed.
Tested on bibtex and natbib.
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg208912.html
It is now possible to specify in the lib/language file whether screen
rows can be broken anywhere (CJK languages) or only at work boundary.
Set WordWrap to false for the CJK languages (notice that japanese-cjk
had been forgotten before).
Moreover, remove a test for separators in row element that was not
really helpful.
Fixes part of ticket #10299.
The first step is to move the MathRow cache to BufferView, alongside
coordCache. This was on the todo list anyway, since it allows to let
go the math row information when the math equation is not on the
screen anymore. With the old scheme, it would always remain in memory.
Then, when computing caret size in MathData::metrics, make sure that
the mathrow of the elements that are linearized in the MathRow object
get their caret size information initialized too.
Fixes bug #11587.
Currently, math autocorrect allows to transform a couple of characters
to a new one. This patch allows to transform a couple (sequence,
character) to a new character.
No example are implemented right now. One possible idea would be
"--" + ">" => \longrightarrow
This effectively allow paragraph breaks in insets only for cosmetic
reasons (e.g., to align contents on different lines).
This is the last change necessary for an enhanced covington gloss support
(which uses the new covington gloss ui)
See https://marc.info/?l=lyx-devel&m=155879185229073&w=2.
The problem is that, after saving the document and reloading, the
TOC is corrupted, more or less, when we run through updateBuffer.
So we reset it first.
The mhchem \ce inset is a text mode environment but allows entering
spaces and mathmode commands. However, even if it doesn't allow unicode
symbols, LyX allows entering them (by copy/paste, for example), causing
latex errors. As a unicode symbol may have a proper latex representation
from the unicodesymbols file, use it instead of the bare symbol. Here, we
don't care about the mode because both text and math mode should be allowed.
For example, the ⟶ symbol is not recognized but its latex representation
(\longrightarrow) is fine. Of course, there may be symbols that are
not recognized anyway, but this is better because they cause explicit
errors from mhchem instead of cryptic iconv errors in case they cannot
be represented in the document encoding.
Prepare for languages that use CJK with TeX fonts and Polyglossia
with non-TeX fonts.
Korean is already supported by Polyglossia,
LyX support will follow (file version change).
Previously, we only included branches from the master document. This
includes those from the parent, grandparent, etc, and does so in a way
that won't crash on recursive includes.
This is hardcoded for now for simplicity and to allow backporting to
2.3.
The behavior is unchanged for all languages but Chinese, Japanese or
Korean.
Fixes part of bug #10299.
Following the suggestion in the Babel-Azerbaijani documentation,
we use the glyphs from the Cyrillic fonts for the Latin
text character. This fits better than IPA fonts (assuming there are matching
Latin and Cyrillic fonts specified) and also provides bold etc.
A branch inset modifies the layout of the internal structures in
which the text is organized. When a branch is active, it is as if it
was not there, but its only presence makes a paragraph which would not
be the last one to actually be the last one, or the check for the
language of the previous paragraph to fail because there is no
previous paragraph before the first one in a branch inset.
Oney way I found to tackle it, is tracking whether the typesetted
paragraphs are actually part of an active branch inset and acting
accordingly.
Encoding cp858 supported by only some iconv variants.
Most users will want to change their "encoding" setting instead
of installing/recompiling "iconv" to support this legacy encoding.
ctests are likely will fail with either "vanilla" or "enhanced"
iconv and test a situation that is unlikely to change generally,
so we ignore this test now by default.
