The referenced commit lead to performance issues and possibly
crashes in some cases when saving preferences. Thanks to Guillaume
for discovering the issues. See #9828 for more discussion.
I hope to come up with a better fix for #9507.
This reverts commit 390ae05444.
This is one part of bug 9744: If you toggle between TeX fonts and non-TeX
fonts, the settings of the other choice are no longer thrown away, but stored
and re-activated if you switch back. Most parts of the patch are purely
mechanical (duplicating some BufferParams members), the only non-mechanical
change is in the GUI logic.
The code in InsetTabular disables the toolbar icons and menu entries related to vertical lines.
The code in GuiTabular disables vertical lines in the Settings dialog.
Note that there was a bug in
GuiSetBorders::set(Left|Right|Top|Bottom)Enabled, where the borders
did not get drawn correctly.
Fixes bug #9816
Starting with Qt 5 the modifiers aren't reported correctly for disabled swap.
Until this is fixed it is corrected by reverting the modifier mask to check for.
The horizontal alignment changes caused a regression for documents in older
formats. This could have been fixed by adding the following lines to the
format entry for 489 in development/FORMAT:
Previously, the horizontal position was ignored except for the
following parameter combinations:
- fixed width and type Boxed and without inner box
- fixed width and any type and with inner box and with makebox
Now, it is also used for the parameter combination below:
- makebox is not used and not (type Boxed and without inner box)
and a corresponding conversion to convert_BoxFeatures() in
lib/lyx2lyx/lyx_2_2.py. However, it was decided to revert the box alignment
changes instead: The box alignment can contradict the paragraph alignment. A
better way to avoid the additional space that can be created by paragraph
alignment (which was the motivation for implementing box alignment) is the
same as for table cells (see noTrivlistCentering() in src/Paragraph.cpp).
This would be a file format change and it is too late now for 2.2.0.
See http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg188147.html for the
complete discussion (subject "Regression in lyx2lyx box alignment").
The culprit was that the computation of textwidth did not take wordspacing in account.
Also fictor the code so that the pixmap path can use the special RTL handling.
It is not clear however that the handling of left and right bearing works correctly.
These features are active in DEVEL_VERSION when Debug is set to LATEX.
1. The TexRow information is prepended to the source panel.
2. Clicking on any line in the source triggers reverse search. (This would be an
interesting feature to implement on the user side, but we need a proper LFUN.)
Found by cppcheck: (style) Same expression on both sides of '&&'.
I deduced the correct if-condition from the other places where theLaTeXFonts()
is called.
These were found by cppcheck:
Member variable 'x' is not initialized in the constructor.
The crash #9788 would not have happened if this had been done earlier.
Use the function support:truncateWithEllipsis() to shorten a docstring with
... at the end. Actually we use U+2026 HORIZONTAL ELLIPSIS instead of "..." when
automatically shortening strings. This is to be consistent with Qt's own
truncation and is much nicer on the screen.
This includes the bugs #9575 and #9572 regarding broken text elision in the
outliner.
Known issues (non-regressions):
* TocBackend::updateItem() should be rewritten to update all TOCs. (#8386)
* "..." should be replaced with … everywhere else on the interface (including
translation strings).
* We should prefer to rely on QFontMetrics::elidedText() to truncate strings
with an ellipsis whenever possible, or an equivalent for the buffer view
dependent on the font metrics. See the warning in src/support/lstrings.h.
* TexRow now computes rows from a DocIterator. In practice, the cursor
highlighting is now correct inside insets, it is no longer restricted to the
topmost level. It certainly also makes forward-search more precise.
* Added the option to disable a texrow when not needed, for perf.
* Fixed a bug where the last paragraph was not properly highlighted.
Limitations:
* TexRow still does not handle: math (e.g. multi-cell), sub-captions, inset
arguments.
* New TOC "math-macro". This means that math macros can now be accessed in the
outline pane in their order of appearance or in alphabetical order, and can be
searched using the filter.
* Lists of floats now show subfloats deeper in the navigation menu
* The arbitrary 30 element cut-off after which nothing is shown except "Open
Navigator..." is removed. Menus now have no limit in size, so Qt may display
them scrollable. In exchange, we always show "Open outliner..." at the
beginning. I tested for performance issues with a rather complex document and
it is fine; but this does not exclude corner cases with lots of TOC entries of
a certain kind. If necessary, populating the navigation sub-menu should be
delayed like the main menu.
* Elements that do not contribute to the output (e.g. in a note, a disabled
branch) are now preceded with a symbol indicating this status. (The machinery
was already there; I wonder why it was not implemented already.) I have chosen
U+274E NEGATIVE SQUARED CROSS MARK.
* Fix the contextual menus in the outliner (bug introduced at 94e992c5).
* Toc item now move to the caption when present, but first center on the float,
to prevent the situation where the caption is at the top of the screen and the
contents of the float is off-screen above the caption.
(Internally, the action of the toc items can now be customised)
* Fix the LyXHTML output. Disabled captions no longer appear in the list of
figures.
There are still a few warnings of the kind
(style) Variable 'x' is assigned a value that is never used.
since I did not touch code where I was not sure whether there might be a real
bug, and I kept some for symmetry reasons as well.
This fixes cppcheck warnings (style) 'class x' does not have a copy constructor
which is recommended since the class contains a pointer to allocated memory.
These were all flagged by "(style) The scope of the variable 'x' can be reduced."
Narowing the scope improves readability, and if it is in a loop then the
compiler will be clever enough to produce efficient code, we do not need
manual optimization for POD types.
This generalises the new use of TocBuilder (97e8101) to listings and wraps and
removes some duplicate code.
Make sure that we will never write an empty float type again in the future
(#9760)
We introduce TocBuilder for building TOCs that take into account both float
insets and their captions.
* Floats without caption are shown with their content.
* Floats with a caption are shown with their caption, but clicking the entry now
correctly moves to the float and not to the caption.
* Subsequent captions produce additional entries in the TOC.
* Figures and subfigures are correctly ordered in the outliner.
* New TOC "senseless" for captions appearing alone (a bit like broken references
are still displayed in the menu and outliner).
* Disable LFUN_CAPTION_INSERT if there is already a caption in a listing
Known issues:
* Inconsistent output for includes located inside floats
* We should record the end of the float in addition of the beginning for a more
accurate cursor -> outliner entry conversion
These were all found by cppcheck. Even in constructors that are there "only
because of std containers" the class should be initialized correctly. You can
never know whether such an object does not get used, and then a nice crash
caused by dereferencing a NULL-pointer is better than undefined behaviour.
Fix bugs #6501 and #7359.
* Selection highlighting has been broken since a conflict with
reverse-search was repaired (at 00a62b7c), is now fixed.
* The selection highlighting was not accurate, for LaTeX formats (in
full source view), and meaningless, for non LaTeX formats.
* fix regression at cc00b9aa: force_getcontent_ was always true
therefore the code to detect changes in the generated source was
dead. The consequence is that the source view would jump to the
beginning at each updateView() even if no change occurred. Cc00b9aa
was meant to fix#5600, which I cannot reproduce with the new
implementation.
* Various improvements:
* When the position-to-line conversion is unavailable (LyXHTML, LyX
source, etc.) we focus on the first difference instead.
* Get some space around the cursor
* Respect the scrollbars
* Highlight with QTextEdit::ExtraSelections instead of cursor
selection (the latter used to break syntax highlighting of the
TeX code... which was not so much of an issue before because the
wrong part was selected)
Known issues:
* The highlighting is off by one line in very last paragraph of a
document. This appears to be a bug in TexRow.cpp.
* The highlighting is off for any kind of inset. This could be
solved by adapting TexRow so that it accepts CursorSlices as
and argument for the conversion to line number. (this is bug
#4725)
Fix bug #9493. The source panel was very slow with auto-update on. Now
we use a timer that ensures that the source is generated only at
rest. The delay is short or long depending on whether we show the
source of a paragraph or the whole source.
* GuiFontMetrics::pos2x, x2pos: add support for inter-word spacing.
* GuiPainter::text: idem
* Row::Element::countSeparators:
Row::countSeparators: new methods that count spaces in strings.
Row::setSeparatorExtraWidth: new method (code lifted from TextMetrics.cpp).
* TextMetrics::computeRowMetrics: rely on the above methods.
* RowPainter::paintMispelledMarked: pass only a Row::Element object reference
RowPainter::paintStringAndSel: idem; do not rely on values returned by
Painter::text (trailing spaces do not honor wordspacing value).
The goal of this commit is to make painting faster by reducing the
number of strings to paint. To this end, it is necessary to include
spaces in row elements.
Also importantly, this commit should fix existing problems with line
breaking in chinese text.
* TextMetrics::breakRow: do not do anything special for word separators.
* Row::add: when adding a character to a row element, keep the string
width updated. If need be, it is possible to tweak this by updating
every 10 characters, for example.
* GuiFontMetrics::breakAt (new): use QTextLayout to break text either
at word boundary or at an arbitrary width.
* Row::Element::breakAt: use the above method.
* Row::shortenIfNeeded: simplify now that because there is no need for
handling separator elements. This will be taken care of by the
improved breakAt.
Two things remain to be done:
* remove all traces of separator row element
* re-implement text justification.
When adding units to the external inset bounding box I overlooked that
InsetGraphics supports only bb, cm, mm and in. Therefore I added too many
units for the external insets. We are not as strict as the graphics inset
and allow all absolute units, but no relative ones.
This brings the external inset on par with the graphics insets as far as the
clipping option is concerned. The graphicxs package supports both: A bounding
box without units (which means that bp ia assumed), and a bounding box with
units, so we can simply output the values including the units.
Being able to compile document with zipped .eps files was a useful feature of
the graphicxs package 20 years ago, but the LyX support is no longer relevant:
- The flag is ignored if preview is on
- If pdflatex is used then uncompressing happens during the compilation anyway
- If set, the flag prevents LyX from issuing proper error messages if
something with the image is wrong
- For hard disk capacities from 20 years ago not uncompressing is a useful
feature, but for current hard disk capacities it does not matter
- The external inset does not have it, and if we want to merge both insets
one day we would need to implement it there, which is even more difficult
than in InsetGraphics
Since commit 7ac70092, lyx::dispatch returns a DispatchResult const &,
which is ignored in the cases below. Nevertheless, the windows
compiler complains that it does not know this type. Gcc and clang can
deal with it without problem.
Now the minibuffer toolbar is "auto" by default. It is opened by
command-execute (M-x) and closed when the command is executed without error.
* make lyx::dispatch return a DispatchResult struct
* there is a new MINIBUFFER type of toolbar, that can be used for this use.
* remove special handling of M-x in minnibuffer; Escape can be used instead. Fix focus in this case.
* when minibuffer toolbar is "auto", make the toolbar close itself after
- a command has been executed without error
- an empty command has been executed
- the Escape key has been used
[this is actually commit fdcff02a, which was later reverted at dd61d8cf]
There is a second solution in the code which uses some undocumented Qt
stuff, but it does not work in some cases. The best is to rely on the
documented way.
There is no need for real-valued line width in painters. Actually, this even leads to uneven dashes for continuous spell checker.
The new code is supposed to be equivalent to the old one, just more readable. From this, we can try to see whether some lines need to be made thicker on HiDPI screens.
This effectively makes the horizontal size policy "minimum", which
makes it clear that there is no advantage for this widget of
increasing the horizontal size past the minimum, allowing other
GUI elements to use the horizontal space if useful.
This change for caseCB is consistent with wordsCB and searchbackCB.
Now the minibuffer toolbar is "auto" by default. It is opened by
command-execute (M-x) and closed when the command is executed without error.
* make lyx::dispatch return a DispatchResult struct
* there is a new MINIBUFFER type of toolbar, that can be used for this use.
* remove special handling of M-x in minnibuffer; Escape can be used instead. Fix focus in this case.
* when minibuffer toolbar is "auto", make the toolbar close itself after
- a command has been executed without error
- an empty command has been executed
- the Escape key has been used
The horizontal size policy is now set to "MinimumExpanding", which
means that sizeHint() is enforced as a minimum, but that the widget
can make use of extra available space.
Before, the size policy was ignored, and often resulted in a
scrunched pane that had to have its size manually increased.
The symptom of the bug is that the preference could be incorrectly
displayed (based on the value of the statusbar preference).
This seems to have been a copy/paste mistake introduced in 214f7ed2.
Actually, the change is done only if the cursor language was the
document language already.
This fixes an trivial but annoying problem: create a new file (in
English), change language to your favourite language, then start to
write. Before this fix, the words come out in English, which does not
make sense.
Fixes bug #9586.
A new preference is introduced for allowing the record of the document
directory path in the saved file. Without explicit consent, it is not saved.
If the origin tag contains an invalid/wrong path or garbage, LyX behaves
exactly as before, i.e., included files are simply not found.
Create new helper class UndoGroupHelper, which simplifies a lot the
handling of undo groups in cases like this one. The class tracks open
undo buffers and allows to switch buffers transparently.
Using the class for advanced search and replace is trivial. THe class
may be useful in some other classes.
Fixes ticket #8658
Add a new tag HasGuiSupport to language file. Add it for all l10ns
that we currently ship. The po files that are unused are not currently
tagged as available, but this could be done, since the code later
checks that the translation is actually there.
This new information is used in GuiPrefs when populating the language
combox.
The new scheme implies that adding a new language is now a two-step
process:
* the language code has to be added to po/LINGUAS, as before;
* one of the entries of the lib/language file has to be selected as
reference and be given the "HasGuiSupport true" property.
LaTeX lengths must not use scientific notation, since the + sign has a
different meaning (glue lengths). This is the GUI part of bug 9416,
on top of part 1 [59e4d16ab/lyxgit].
There were now 2 entries named "none" in backgroundcolorCO
- delete the fixmes; the LateX name is used as parameter to save unnecessary conversions for the LateX output; please ask me before adding fixmes
stupid me, I used a translatable string as box parameter. Therefore the feature only worked correctly with English locale. Now it works for every locale.
The "save-as" part of the bug is fixed by extending the \textclass tag
such that, if a local layout file is used, its path relative to the
document directory is now stored together with the name. If a relative
path cannot be used, an absolute one is used but, in this case, the
document is not usable on a different platform.
The "copy" part is fixed by introducing a new \origin tag, which is
written when the file is saved. This tag stores the absolute path of
the document directory. If the document is manually copied to a
different location, the local layout file is retrivied by using
\origin (which is only updated on save).
This new tag may prove useful also for locating other files when the
document is manually moved to a different directory.
As in the original implementation the files needed for the layout
(for example, a latex class) had to be in the same directory as the
layout file, this directory has also to be added to TEXINPUTS.
The problem was due to the use of the wrong symbol for the slash.
The zero-width symbol for the \not operator was being used.
Using TeX fonts for all symbols gives now a better uniform look.
It is not possible using the alternative code even with Qt 5.4.1
because some glyphs are still missing.
Note that I move the definition of cur up because we need to check if
it changed before the return. I also removed the const because
notifyCursorLeavesOrEnters() requires that.
This commit probably fixes other issues for any inset that defines
notifyCursorLeaves().
This fixes only part of #6173.
Normally the theBufferList().updatePreviews(); statement would go inside
of PrefDisplay::applyRC. However, that would not work well because
Buffer::updatePreviews() calls loader() which conditions on
(lyxrc.preview == LyXRC::PREVIEW_OFF) but the new RC has not been set at
this point.
Control + Shift + PgDn now moves a tab to the right.
Control + Shift + PgUp now moves a tab to the left.
These keybindings are consistent with Chromium, Firefox,
Nautilus, and gnome-terminal.
Note that I allow for wrapping. This is consistent with
allowing wrapping for buffer-{next,previous}, but there
might be reasons to disable it in the future.
buffer-next and buffer-previous are now only enabled
if there is more than one tab. Note that it does not
matter whether we are at the first or last tab because
we cycle.
Since the logout process still can be canceled here, we should only
check that all dirty buffers are saved and that the session state is
recorded.
Please test, particularly on Windows and OSX, that logging out with LyX
running (both with and without dirty buffers) proceeds sensibly and that
the LyX session is correctly restored when you re-login.
Building on cd8be655, we still allow viewing a produced PDF even if
there were compilation errors. However, now the user must click the
"Show Output Anyway" button in the LaTeX Errors dialog. The reason
is that before, there was a chance that the user would not realize
there was an error (because the PDF would be shown over the error
dialog). The approach in this commit makes it more clear that there
is an error.
A new LFUN is introduced, LFUN_BUFFER_VIEW_CACHE. It is useful not
just for the implementation of the "Show Output Anyway" button, but
also to show the last compiled version of a document, which can save
time if a document takes a long time to compile (e.g. heavy use of
knitr).
* Disable "New Inset" button
* Do not disable line edits, but use setReadOnly instead (this allows copying contents)
Fixes: #9408
Note that some dialogs still need some care.
The computation of length on screen depend in particular of the computation of the size of an em. Many places of the code used to rely on the width of the M character, which is not really correct:
http://en.wikipedia.org/wiki/Em_%28typography%29
In digital typography, the best value to use is the point size of the font.
* Implement FontMetrics::em(), which returns the value in pixels of the EM unit.
Convert code to use it.
* Introduce Length::inPixel(MetricsBase const &), which takes the textwidth and em information from the MetricsBase object. Convert code to use it.
* Fix several places where Length::inPixel is used without a proper em value.
* add mathed_font_em() helper function. It should eventually be removed like some other functions in MathSupport.
* Add dummy implementation of FontMetrics to tex2lyx for linking purposes.
The problem came from the fact that Qt associates Interlingua to locale C.
Now, we do not rely anymore on the Qt locale to set the language. I suspect that the problem will still exist if the system locale is ia_IA.
Fixes bug #9267.
If a compressed svg icon is present, load it instead of a png one.
Also introduce two more sizes (huge and giant icons) that should be
useful when using hires displays, as svg icons automatically scale
to the desired size without loss of quality.
The math icons for the symbol image in the math completer were hardcoded to the
command names. This is wrong for some icons for various reasons, e.g. the case
insensitivity of windows file systems. Therefore we have to use the replacement
list which is also used for the toolbar icons. Bug #3538 is not closed because
of this problem, but IMHO it has nothing to do with this bug, it is a more
general one.
After the str-metrics merge, the kludge for displaying symbols whose
code point corresponds to a soft-hyphen was not working anymore.
The solution is replicating the offending glyphs with index 0x00ad
at a different index. They were replicated at 0x00ac, whose glyph
was missing in all affected fonts.
However, this would not work by alone because, if a system font with
same family name exists, it would be picked up instead of the right one
(at least on non-Windows platforms). For this reason, the style of the
fonts has been changed from "Regular" to "Lyx", so that we can discriminate
the right font. However, this requires using at least Qt 4.8. If an
older Qt is used *and* a system font with same family name is already
available, the affected glyphs will all turn out on screen as the
"logical not" symbol.
I have also set the executable flag on the font files, because on Windows
they are loaded only in this case.
This solves #9229.
This commit fixes a thinko in [8bab2338/lyxgit] causing the warning:
QObject::connect: No such slot lyx::frontend::GuiPreferences::slotApplyRC() in ../../../../src/frontends/qt4/GuiPrefs.cpp:3308
QObject::connect: (sender name: 'applyPB')
QObject::connect: (receiver name: 'PrefsUi')
This fixes the -geometry command line option and restores the
"Use icons from system's theme" checkbox in the preferences.
There is still code addressing Qt4 and xlib that has to be
audited. This code cannot be compiled with Qt5 because the
default backend is now xcb and not xlib. I have marked such
code with a "FIXME QT5" comment.
This implement horizontal scrolling of rows to allow editing insets
(math, tabular...) that are larger then the screen. The scrolling happens
as the cursor moves, in order to make sure that the cursor is always visible.
This effectively closes an 11 years old bug.
This feature is the result of the work of Hashini Senaratne as part of
Google Summer of Code 2013. The code has been cleaned-up for inclusion
and remaining bugs have been fixed.
Fixes bug: #1083.
[This commit is the output of the "horizontal scrolling" GSoC 2013
project, by Hashini Senaratne. The code has been cleaned up, some
variables have been renamed and moved from the Cursor class to
BufferView::Private. This is the base from which I (jmarc) will polish
the feature for landing on master.
Below is the original commit log of Hashini, updated to reflect the
changes that have been done.]
This feature also applicable for other insets; graphics and labels.
This implementation is capable of scrolling a single row when reaching
its content which is beyond the screen limits, using left and right
arrow keys.
The attribute 'horiz_scroll_offset_' introduced in the
BufferView::Private class plays a main role in horizontal scrolling of
the wide rows that grow beyond the screen limits. This attribute
represents by how much pixels the current row that the text cursor
lies in should be get scrolled.
The main logic that is responsible for drawing the scrolled rows is
within the BufferView class, BufferView::checkCursorScrollOffset.
* The main logic is called via BufferView::draw.
* What this does is set the horiz_scroll_offset_ attribute in in order to
show the position that the text cursor lies in.
* To make sure that BufferView::draw gets involved when Update flag is
FitCursor, necessary changes are made in BufferView::processUpdateFlags.
Basically what the logic that used to set the horiz_scroll_offset_
does is,
* The row which the text cursor lies in is identified by a
CursorSlice that points to the beginning of the row. This is the
'rowSlice' variable used in BufferView::checkCursorScrollOffset. Acessors
are added to obtain this variable. Here row objects were not used to
identify the current row, because it appears that row objects can
disappear when doing a decoration update for example. This means that
comparing row pointers is not a good idea, because they can change
without notice.
* Stop calculations of horiz_scroll_offset_ variable, if metrics have not been
computed yet. Otherwise the calls to TextMetrics::parMetrics, calls
redoParagraph and may change the row heigths. Therefore vertical scrolling
feature may get disturbed. This is avoided.
* Using BufferView::::setCurrentRowSlice resets horiz_scroll_offset_
when changing cursor row. This is done in order to prevent unwanted
scrolling that happens when changing the selected row using up and
down arrow keys.
* Recompute inset positions before checking scoll offset of the row, by
painting the row insets with drawing disabled. This is done because the
position of insets is computed within the drawing procedure.
* Current x position of the text cursor is compared with the
horiz_scroll_offset_ value and the other variables like row.width(),
bv.workWidth(). Compute the new horiz_scroll_offset_ value in order
to show where the text cursor lies in. The basics conditions that we
check before recomputing it are, if the text cursor lies rightward to
the current right screen boundary, if the text cursor lies leftward
to the current left screen boundary, if the text cursor lies within
screen boundaries but the length of the row is less than the left
boundary of the screen (this happens when we delete some content of
the row using delete key or backspace key).
* Change update strategy when scrooll offset has changed. This allows to
redraw the row when no drawing was scheduled. By doing so, it was
possible to redraw a wide row when moving to the leftmost position of the
wide row, from the leftmost position of the row below, using the left
arrow key.
In TextMetrics::drawParagraph it is checked whether the current row is
what is drawing now. If it is so, the value used to the x value of the row
for drawing is adapted according to BufferView::horizScrollOffset.
The method used to pass boundary() was fixed to get row when cursor was in
a nested inset. This matter is considered in Cursor::textRow and it is
modified accordingly.
GuiWorkArea::Private::showCursor() is modified to show the cursor position
in a scrolled row.
This happens when part of the word is selected.
To reproduce:
1. Start a new document
2. Type "af"
3. Select 'a'
4. Observe that the right part of the 'f' is clipped away.
This patch uses QRegion to set a clip region that is everything except
the part that is drawn in another color.
Fixes: #9223.
This patch fixes a series of warnings like:
{{{
In file included from ../../master/src/mathed/InsetMathBoldSymbol.cpp:13:
In file included from ../../master/src/mathed/InsetMathBoldSymbol.h:15:
../../master/src/mathed/InsetMathNest.h:37:7: warning: 'lyx::InsetMathNest::metrics' hides overloaded virtual function [-Woverloaded-virtual]
void metrics(MetricsInfo const & mi) const;
^
../../master/src/insets/Inset.h:186:15: note: hidden overloaded virtual function 'lyx::Inset::metrics' declared here: different number of parameters
(2 vs 1)
virtual void metrics(MetricsInfo & mi, Dimension & dim) const = 0;
^
}}}
For a description of the problem, see for example:
http://stackoverflow.com/questions/18515183/c-overloaded-virtual-function-warning-by-clang
3 different strategies have been used:
* in frontend, some functions have been renamed.
* in InsetMath.h, Inset::write has been explicitly imported too
* in InsetMathNest.h, since a comment said that hiding Inset::metrics is intended, a special trick has bee used to silence the warning.
These are now in version.cpp. The build machinery should therefore make sure
that version.cpp is recompiled at every compilation.
These variables are now referred to by the other places that made use of __DATE__ and __TIME__.
A similar fix was reverted (453ce611) because of crashes.
The crashes occurred simply because of a failed check that
we have a buffer view before using it. That is now done in
this commit.
The below commit description is copied from the original
commit (fb05011a):
Empty selections can cause confusing behavior for a few reasons:
(1) some functions behave differently depending on whether there is a
selection. If I press delete, nothing happens (where I expect the
character or inset before the cusor to be deleted). If I toggle bold or
emphasize nothing happens (where if there is no selection the entire
word is toggled). There are other LyX functions that depend on whether
there is a selection or not. Further, I wonder if any part of LyX's code
assumes that if there is a selection it is non-empty.
(2) menu options are incorrectly set. For example, the scissors icon.
For remaining empty selection issues, see #9222.
For more information, see:
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg184758.html
The shape of the parbreak separator is slightly changed in order to
better distinguish it from the forced newline. This allows using the
same color of the plain version without risk of confusion.
Introduce the concept of pixel ratio: the ratio of physical and device independent pixels.
This is useful for rendering of content on Retina-displays of Mac hardware with high resolution.
Qt has real support for this starting with Qt5 - therefore it has to be compiled conditionally.
This change uses some work of Marcelo Galvão Póvoa, thank you.
This commit replaces almost all occurrences of Q_WS_WIN to comply
with Qt5. The remaining occurrences should *not* be replaced,
because the guarded code won't compile on Qt5.
The command line argument -geometry WIDTHxHEIGHT±XOFF±YOFF
specifies a preferred size and location for the main window.
Currently, this is semi-broken on Windows. Indeed, only
specifying WIDTH and HEIGHT places the main window such that
the left and top borders are invisible such that the window cannot
be moved. Moreover, the XOFF and YOFF parts (when present) are
used to specify the distance of the window from the left and top
or right and bottom edges of the screen, when using '+' or '-',
respectively. However, -geometry 800x600-20-20, instead of placing
the window such that its bottom and right edges are at a distance
of 20 pixels from the corresponding screen edges, places the
window such that its left and top borders are out of the screen.
This is corrected by this commit, which also addresses the fact
that Qt5 does not define Q_WS_WIN anymore.
Empty selections can cause confusing behavior for a few reasons:
(1) some functions behave differently depending on whether there is a
selection. If I press delete, nothing happens (where I expect the
character or inset before the cusor to be deleted). If I toggle bold or
emphasize nothing happens (where if there is no selection the entire
word is toggled). There are other LyX functions that depend on whether
there is a selection or not. Further, I wonder if any part of LyX's code
assumes that if there is a selection it is non-empty.
(2) menu options are incorrectly set. For example, the scissors icon.
For remaining empty selection issues, see #9222.
For more information, see:
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg184758.html
This branch implements string-wise metrics computation. The goal is to
have both good metrics computation (and font with proper kerning and
ligatures) and better performance than what we have with
force_paint_single_char. Moreover there has been some code
factorization in TextMetrics, where the same row-breaking algorithm
was basically implemented 3 times.
Globally, the new code is a bit shorter than the existing one, and it
is much cleaner. There is still a lot of potential for code removal,
especially in the RowPainter, which should be rewritten to use the new
Row information.
The bugs fixed and caused by this branch are tracked at ticket #9003:
http://www.lyx.org/trac/ticket/9003
What is done:
* Make TextMetrics methods operate on Row objects: breakRow and
setRowHeight instead of rowBreakPoint and rowHeight.
* Change breakRow operation to operate at strings level to compute
metrics The list of elements is stored in the row object in visual
ordering, not logical. This will eventually allow to get rid of the
Bidi class.
* rename getColumnNearX to getPosNearX (and change code accordingly).
It does not make sense to return a position relative to the start of
row, since nobody needs this.
* Re-implement cursorX and getPosNearX using row elements.
* Get rid of lyxrc.force_paint_single_char. This was a workaround that
is not necessary anymore.
* Implement proper string metrics computation (with cache). Remove
useless workarounds which disable kerning and ligatures.
* Draw also RtL text string-wise. This speeds-up drawing.
* Do not cut strings at selection boundary in RowPainter. This avoids
ligature/kerning breaking in latin text, and bad rendering problems
in Arabic.
* Remove homebrew Arabic and Hebrew support from Encoding.cpp. We now
rely on Qt to do handle complex scripts.
* Get rid of LyXRC::rtl_support, which does not have a real use case.
* Fix display of [] and {} delimiters in Arabic scripts.
The use of RLO/LRO overrides to force text orientation was really hackish and the way it was done caused dropped letters in Mac OS X (for some unknown reasons).
This new approach is much cleaner, except that it relies on features not advertised in documentation
but present at least from Qt 4.5 to Qt 5.3:
* TextFlag enum values TextForceLeftToRight and TextForceRightToLeft, which are strong versions
of QPainter::setLayoutDirection; they are passed as a parameter of QPainter::drawText.
* QTextLayout::setFlags method, which is required to pass the above flags to QTextLayout.
The unicode override method is still used to draw strings Mac OS X because, for some reason, the direction was not really enforced in this case.
This can only be done where splitting of string is identical in row breaking and display. It will be possible to reintroduce this when row painting uses the tokenized row information.
The option --enable-qt5 allows configuring for Qt5. The default is Qt4.
Nothing special is done with respect to Qt4, apart from pulling in the
correct libraries. Indeed, other than the core and gui libraries, now
also the concurrent and widgets libraries are needed.
This variable was introduced to guard against any bad consequence of the then-new right-to-left
languages support. Let's be bold and get rid of it altogether!
Now right to left support is always enabled.
The display of partially-selected word is now done in a new Painter::text method
which displays the string twice with different clip settings. This allows to
catter for the case where Color_selectiontext is not black.
Morover, the code that uses unicode override characters to force the
direction of a string is moved to lstrings.h.
Fixes: #9116
The old implementation of Row::Element::pos2x and x2pos did not work
correctly with Arabic text, because characters can have shapes that
depend on context.
This new implementation leverages QTextLayout in a simplified way,
since only one word is added to the layout.
This allows to make Row::Element::x2pos more readable.
Fixes: #9115.
Using a static variable here was premature optimization: fileNames() is only
called from GuiRef (directly or indirectly), and since this is a dialog the
copying of a FileNameList is not noticeable at all.
FileName::tempName() created a new temp file name by using qt to create a
temporary file with a unique name, and then deleting that file and returning
the name. This was unsafe, since other processes or even other threads of the
running LyX could create files with the same name between deletion and then
using the temp name.
This is fixed by using the TempFile class instead. As a side effect, a few
cases where the temp files were not deleted after usage were fixed as well.
The only place that is still unsafe is createTmpDir().
Thanks to maciejr we know now what the remaining problem was with bug 7954:
My unicode symbol fallback works fine, the problem was that a font named
"Symbol" is available on OS X, but it does not use the font-specific encoding
we expect: Almost all glyphs are at their unicode code point.
Therefore the bug is fixed by re-enabling the unicode workaround and blocking
the Symbol font on OS X.
Maximizing the document settings window when on the modules pane,
the horizontal space is now given to the module names and so no
scrollbar is needed. Before, even when maximized, a scrollbar was
sometimes needed because the horizontal space was given to the
buttons in the middle, which did not provide an extra benefit.
The default sizeType was "Expanding" and is now changed to "Minimum"
for the horizontal spacer above the middle buttons.
The firs tinvolves a thinko in BibTeXInfo::expandFormat. We were previously
counting passes through this routine, which means: one for every character,
more or less. So long strings would hit the "recursion limit". But what
we are worried about is an infinite loop caused by misues of macros, so that
is what we need to count.
This prevents the error we were previously getting, but it reveals a huge
slowdown when one tries to open a citation inset with a large nubmer of keys.
So we also limit the number of keys we try to process, and the length of the
string we try to display, when we are generating citation information.
I'm convinced that there is a deeper problem in how citation information is
generated (see the bug tracker for more info), but that will require major
surgery and a file format change
addPath() always adds a slash at the end, os got a double one before.
Qt and the OS are clever enough to understand that, but a single slash
looks more nice.
This has the advantage of simplifying our code and to produce the
correct output: the small capitals should have the exact same width as
the lower case letters.
The slanted fonts are also translated to oblique on Qt side, but this
does not seems to have an effect in my testing. It may be that proper
oblique fonts need to be installed.
* remove unused class TexStream.
* remove unused virtual method Inset::cellXOffset
* remove second argument of FileDialog constructor, which was actually
not used
* remove some dead local code
* remove some unused private members of classes
* in InsetMathNest::updateBuffer, fix the logic of a test
for possible thread conflicts, of the sort Georg resolved at
6a30211f. I have made static variables const where possible,
and marked cases that looked potentially problematic with the
comment:
// FIXME THREAD
Many of these definitely are vulnerable to concurrent access, such
as the static variables declared at the start of output_latex.cpp.
Suppose, e.g., we were outputting latex and also displaying the
source of a different document.
I'd appreciate it if others could grep for "FIXME THREAD" and see
if some of these are harmless, or what.
It is confusing for the users to see the formats 1.3--1.6 in the file-open
dialog and not the 2.0 format. The exotic extensions were only used when
e.g., LyX 1.6.x exported to LyX 1.5.x format.
try to show dialogs or ask for user input while doing advanced find
and replace. In many of these cases we should simply find a way for
avoiding lyx to show a dialog, however an extra info/warning dialog
is better than the GUI freezing and having to kill the process.
This extends the already existing math symbol fallback mechanism in two ways:
1) When considering the availability of the math font, also take broken
code points into account. These are currently 0x0009 and 0x00ad, depending
on the platform.
2) If the fallback symbol in the standard "Symbol" font is not given, or if
the "Symbol" font is not available, or the fallback symbol is one of the
broken ones, try to use a generic unicode symbol as second fallback instead.
If this is available, we rely on Qt to find a font which has it. Only if
this is not available, display the symbol as ERT.
This ensures that we do never get a symbol which is not displayed: Either
it can be displayed, with or without fallback, or it will be shown as ERT.
* disable branch-add-insert in pass thru paragraphs
* when it is not possible to input a quote inset, insert a single
ascii quote when argument to quote-insert is "single"
* handle "mathspace" dialog in Text::getStatus
* disable insertion of newline inset in pass thru paragraphs
* handle "mathdelimiter" and "mathmatrix" dialogs in GuiView::getStatus.
the name, in the hyperlink. Fixes bug #8792.
This also fixes a bug discovered while working on this code: The
params passed to GuiHyperlink were never used.
the minibuffer. As the comments explain, this leaves a different
bug, but (a) it isn't a crash and (b) it probably won't affect
many users, if *any* users.
See https://bugreports.qt-project.org/browse/QTBUG-34132
* [QTBUG-34132] QFileDialog does no longer instantiate widgets if a
native dialog will be used instead. Therefore some accessors
which previously returned unused objects will now return null.
As before, you can set the DontUseNativeDialog option to ensure
that widgets will be created and used instead.
Seemingly, Qt uses native dialogs by default starting from version 5.2.0.
When trying to open a file dialog, LyX segfaults in release mode, whereas
Qt asserts in debug mode:
ASSERT failure in QList<T>::at: "index out of range",
file /usr/local/qt/5.2.0/include/QtCore/qlist.h, line 472
This is avoided by explicitly setting the DontUseNativeDialog option
in the code path selected by *not* setting USE_NATIVE_FILEDIALOG.
This option was introduced in Qt 4.5, which is the minimum required
for compiling LyX. So, it is not protected by a preprocessor macro.
LFUN_BUFFER_SAVE_AS has an optional argument where an initial format can be preset
This fixes:
* The remainder of bug #3402: Open Export As dialog when attempting to export to read-only directories
* Bug #8886: 'export as' should default to the default document output format
It is always a bad idea to compare a localized string. I think the whole method Formats::getFormatFromPrettyName (which is now unused) should be ditched. This is bound to fail.
In [19024f72\lyxgit] this line was removed. Later this caused that floats were converted to strings using ','s instead of '.'s. Readding this line fixes this.
Get the default language by a mix of QLocale and LyXRC::gui_language
Known limitations:
* encoding is supposed to be UTF-8 (the charset parameter is checked);
* context is not handled (implemented differently in LyX);
* plural forms not implemented (not used for now in LyX);.
* tThe byte endianness of the machine on which the .mo file have been
built is expected to be the same as the one of the machine where this
code is run.
(unless it's already there, in which case it should move to the end of the next paragraph).
Change the preference setting name (mac_like_word_movement to mac_like_cursor_movement)
to better reflect its function.
Patch and description from Bennett Helm
- InsetBox.cpp:
a framebox without inner box and without a width is \fbox
a framebox with inner box is also \fbox
a framebox without inner box and with width is \framebox
- GuiBox.cpp: the width checkbox must be checked if there is width
- this was forgotten to commit;
(without this we would get invalid LaTeX code when changing in the box dialog a makebox without a width to a minipage and press apply - a makebox required to specify a width, at least an invisible one like "0cm")
* InsetBox and GuiBox: Use proper empty length instead of the broken -9.99col% trick
* some slight changes to the logic of GuiBox to make sure that values are set as needed.
* lengthToWidget(): handle properly the empty length case. All the other related Qt helpers did it already, it was probably an oversight. Also set the default_unit parameter as optional (not needed in this patch actually, but I got carried away :)
* allow generating LaTeX code for an empty length, since some broken code does that.
If there is a new toolbar, it will not be restored by Qt and we need to
initialize it ourselves. However, it is not so easy to find out which
toolbars are restored by Qt and which are not. For this, the setVisible
function of GuiToolbar is 'misused'. If the visibility is set, the toolbar
must have been restored by Qt and we should leave it alone.
LyX uses QTemporaryFile to create a unique temporary directory. This
temporary directory will consist of two random characters and the process
identifier (PID).
Currently, the two random characters are often the same because Qt's
random generator was not seeded. If there are a lot of lyx temporary
directories accumulated, the chance of failing to find a unique temporary
directory is (N/100)%.
The temporary directories can be left behind if either LyX crashes, or
when a file in the temporary directory is opened in another viewer when
LyX closes. This can be a pdf that is viewed in a reader that disallows
the file to be removed while viewing it.
The default citation capability of LaTeX is not a true numerical
citation engine, rather it uses a mixture of labels/numbers. Thus
we now distinguish them: "numerical" always increments the bibitem
counter and uses its value as a numerical citation label, while
"default" only uses the bibitem counter when no label is provided.
LyX file format incremented to 471.
These should be used if any new style needs to be introduced in the stable
2.1 series: If the ForceLocal flag of the style is set, it will always be
written to the document header, so that even older 2.1 versions can read
and correctly output the document.
Reason for this 'cleanup' is the strange "optional = false" lines at the
end of the "case md_item" and "case md_subitem". Then, it is nicer to
directly use the value of the switch to be the running variable and to use
this to determine whether an item is optional and whether we should quit.
The panels in GuiDocument and GuiPrefs are stored in a map. The keys are
the translated descriptions of these panels. Whenever someone changes the
gui language and reopens the Document Settings pane, LyX asserted because
it could not find the "Child Documents" pane.
In commit bd9e8fecd the currentIndex of the FindAndReplaceAdv Pane was
changed from 0 to 1. Since then LyX crashed when requesting the pane or
when changing LyX preferences.
This patch reverts this, although it is not clear why it would crash
otherwise. It is still committed like this, because LyX is unusable
without.
View Source pane layout now automatically switches between horizontal
and vertical design when docked in vertical or horizontal way.
Original idea and patch from Edwin.
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg178801.html
Note: the long standing-fight with too bulky minimal QTextEdit size
is now solved via ViewSourceUi.sizePolicy=Ignored.
This is mostly unused private class members.
There are also a few unused functions that got #if'ed out. I never know in this case whether the code should be nuked.
False positive rate of hints is quite high. Although the includes can be
technically removed (due to other includes) they logically belong to the
header.
each failure.
There are several places I was not sure what to do. These are marked
by comments beginning "LASSERT:" so they can be found easily. At the
moment, they are at:
Author.cpp:105: // LASSERT: What should we do here?
Author.cpp:121: // LASSERT: What should we do here?
Buffer.cpp:4525: // LASSERT: Is it safe to continue here, or should we just return?
Cursor.cpp:345: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:403: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:1143: // LASSERT: There have been several bugs around this code, that seem
CursorSlice.cpp:83: // LASSERT: This should only ever be called from an InsetMath.
CursorSlice.cpp:92: // LASSERT: This should only ever be called from an InsetMath.
LayoutFile.cpp:303: // LASSERT: Why would this fail?
Text.cpp:995: // LASSERT: Is it safe to continue here?
The default sizeAdjustPolicy is AdjustToContentsOnFirstShow. As the
combobox is initially filled with all items, it will not change size if we
later remove the 'At Decimal Separator' item.
Before, if a user had "Group" checked in GuiRef and double-clicked
on a category, that category would be inserted as a (broken)
reference. Now, when a category is double-clicked, nothing happens.
If a label starts with ':' and 'Group' is checked,
the label is now shown under "<No prefix>" instead of
not shown.
Note that labels starting with ':' can be valid in LaTeX.
If "Group" is checked, "<No prefix>" is shown only if there exists a
label with no prefix. Before, it was shown even when it was empty and
even when there were no labels at all.
As discussed on the list. No automatic contents detection is done, the user
needs to use the special paste menu instead. I used the new TempFile class
for safe temporary file handling.
The documentation would go into section 2.2 of UserGuide.lyx, but I am not
allowed to edit that document.
The HTML export is now mature enough so that it can be used to transfer
formatted text to the clipboard. This enhances interoperability e.g. with
office applications.
We only need to sort the formats when it is really necessary, i.e. for GUI
purposes.
This also prevents 11000 requests for translation everytime the toolbars
are updated.
- fileformat change
- it was a pity that LyX did not yet support a simple rectangular frame without a defined width but LyX did this for e.g. oval frames
- \fbox and \mbox often occur in TeX files and can now be imported
Before, it was done on editingFinished(). The new behavior is more
intuitive because it is easier for the user to see how editing the box
is connected with enabling/disabling the other widgets. Before, the user
would not get instant feedback and would have to click away before the
connection is revealed. This new behavior is less efficient, however,
because checkEnabled() is called after every keystroke.
