This is a first cleanup step. More complex rules have to be
implemented on top of this.
Use proper spacing \thinmuskip, \medmuskip and \thickmuskip instead of
ad-hoc values.
Rename isRelOp to isMathRel and introduce isMathBin and isMathPunct
(for InsetMathChar and InsetMathSymbol). Update the categories of
characters in InsetMathChar according to LaTeX source (fontmath.ltx).
Set correctly the spacing around mathrel, mathbin and mathpunct
elements. Use \thinmuskip around MathDelim instead of a hardcoded 4.
This is related to bug #8883.
There is already a spacing of 2 pixels on each side of a button (e.g. collapsed inset). There is no need to add one extra pixel for command insets.
Fixes part of bug #10149.
The computation of the width of the button was wrong. If <--> stands for TEXT_TO_INSET_OFFSET/2 spacing, and if `[]' marks the button's limits, then the intent is
<-->[<-->button text<-->]<-->
Therefore the physical grey rectangle width is
width - Inset::TEXT_TO_INSET_OFFSET
With this change, the spacing on the right of the button is not larger than the left one.
Fixes bug #10147.
The way it works is:
* the inset defines allowParagraphCustomization() correctly
* Text::getStatus acts on it.
Note that, in Text::getStatus, testing for cur.inset().allowParagraphCustomization() does not make much sense, since one should pass the cursor idx as parameter. Actually, for some reason the safest bet is to use the owner of the Text object as inset.
The way it works is:
* the inset defines forcePlainLayout() correctly
* Text::getStatus acts on it.
Note that, in Text::getStatus, testing for cur.inset().forcePlainLayout() does not make much sense, since one should pass the cursor idx as parameter.
There are many other lfuns that do not have to be handled directly by insets. InsetScript in particular has tests for way too many lfuns.
This method did access more CursorSlice than Text. It is only a setter for
CursorSlice with some bound checking. The new signature is
setPitPos(pit_type, pos_type).
The old name would be confusing wrt setSelection(), which does additional checks.
This one is a pure acessor, and the more complete methods are
* setSelection(), which avoids empty selections
* clearSelection(), which resets anchor, and sets word selection and mark more to false.
Most of the code should use these two instead of selection(bool), but this is for later.
It turns out that it did not take off since introduced in 2011. It is better to remove it and the associated boost headers (extract.sh was run against boost 1.60 to do the update).
Since we will move away from several boost classes when transitioning to C++11, it is good to start by removing lesser used ones.
It is easier to use instead getVectorFromString for the use we have of this tokenizer. The two places are environment.cpp (path stuff) and qt_helpers (file fileters). The new code is much shorter.
This allow to remove boost/tokenizer.hpp and friends from our boost tree.
Some headers contain
class Foo;
whereas there is no class Foo.
The list of class statements is given by
classes=`git grep '^\(class\|struct\) [a-zA-Z_:]*;' src | sed 's/^.* \(.*\);/\1/'|sort -u`
The ones that are useless are:
for c in $classes ; do grep -r "\\<$c\\>" src| grep -vq '^[^:]*:\(class\|struct\) [a-zA-Z_:]*;' || echo "$c"; done
Those two functions used two different hackish and buggy
implementation to know when the function is disabled. Replace that by
asking the containing inset whether it accepts inserting display math
inset.
Fixes bug #10033.
When in a tabular cell, "this" is just a lone InsetText, while cur.inset() is the whole tabular. This makes a big difference, especially when one wants to count cells.
Fixes bug "9954.
Compiling different parts of the sources with different WINVER may lead to
subtle and hard to detect problems. Better use the same value everywhere.
The existing error message suggests that this was wanted anyway, and it
fixes a compiler warning when cross-compiling for mingw on linux. Our code
does not require a specific value, only a minimum value of 0x5000, which
means the resulting executable will require at least Windows 2000.
Only the ones I understand (DWORD is always unsigned). There are more:
../../src/Server.cpp: In member function ‘bool lyx::LyXComm::pipeServer()’:
../../src/Server.cpp:280:10: warning: enumeration value ‘CONNECTING_STATE’ not handled in switch [-Wswitch]
switch (pipe_[i].state) {
^
../../src/Server.cpp:347:8: warning: ‘success’ may be used uninitialized in this function [-Wmaybe-uninitialized]
&& status == pipe_[i].iobuf.length()) {
^
Use the standard way to check for the resource compiler, as e.g.
libtool does it: AC_CHECK_TOOL does already provide some cross compiling
magic, and we do also get an error now at configure time if windres is not
found.
"Output changes" alters the preamble even in the absence of tracked
changes. Therefore, not being able to notice when it is activated can possibly
yield hard-to-debug compilation failures.
The windres program is typically not called windres for cross compilation.
Now you can call configure with the argument
WINDRES=x86_64-w64-mingw32-windres
in order to use the windres program on a standard debian installation.
The included iconv should not be used on Linux or OS X, but (depending on
local configuration) it might be needed for crosscompiling a mingw target
from Linux. Now the user can choose whether to use the included iconv or not.
cmake does already support that.
eilseq.m4 was taken from the original libiconv 1.14 package.
On mingw-w64, long long (64bit wide) is larger than long (32bit wide).
Therefore we need some more specializations for string, docstring,
otextstream and << overloaded ostream functions. The configuration code
is by me, the source code changes by Shankar Giri Venkita Giri (bug 10053).
This is needed for warning-free compilation with mingw-w64, and does not hurt
for other build configurations. Patch by Shankar Giri Venkita Giri (bug 10053).
The included zlib should not be used on Linux or OS X, but (depending on
local configuration) it might be needed for crosscompiling a mingw target
from Linux. Now the user can choose whether to use the included zlib or not.
cmake does already support that.
zconf.h.in was taken from the original zlib 1.2.8 package. The generation of
zconf.h was made equivalent to the one generated by cmake.
(#8738)
For efficiency, we add a new flag to the buffer indicating when changes are
present. This flag is updated at each buffer update, and also when explicitly
requested via a dispatch result flag.
If we do not do that, it is not possible to position the cursor after
a long inset with the mouse.
To do this, it is necessary to add the pit information to the Row
object. This is a good idea in any case, and will allow to simplify
some code later on.
Fixes bug #10094.
The timer logic introduced to solve bug #7138 was not entirely reliable; in
particular it resulted in spurious updates (noticeable by the treeview
collapsing just after one opens a branch, in particular).
This commit cleans up the timer logic. I followed the original design decision
of having an immediate update followed by a delayed update. Now the updates are
appropriately compressed and done after a delay of 2s (as can be noticed with
the treeview still collapsing, unfortunately, but after a more predictable
delay...).
4d1ad336fixed#9754 but caused perf issues by cancelling the gains of having a
timer (introduced after #7138). This introduces in GuiToc::enableView() a
lightweight check of whether the widget should be updated. The logic is inspired
from GuiViewSource::enableView().
When document settings are modified, a command
inset-forall Branch inset-toggle asign
is run to open as needed all branches. At the end of the said loop,
the cursor is reset to where it was. However, the cur_after undo
element member is not set because it already had a value.
To make this work as expected, it is necessary in LFUN_INSET_FORALL to
reset the cursor before ending the undo group and to insert a dummy
recordUndo call.
Fixes bug #10097.
Deriving from std::vector to provide helper functions appears a touch
excessive. Use typedef instead and move helper functions to the base class. New
header Toc.h provided to replace forward-declarations.
Remove TocIterator which is useless.
The old name conflicted with the newly introduced Inset::isTable.
Now the meaning is as follows.
* Inset::isTable() is true when the inset is composed of lines and columns
* InsetMathHull::allowsTabularFeatures is true when the current type of hull allows for tabular-like functions.
While a one paragraph large collapsable inset (containing for example a tabular) could be very wide and trigger horizontal scrolling, the code that makes collapsable insets wide when they contain several paragraphs would actually make them narrower in this case.
Typical example is a wide tabular and a caption in a table float, where horizontal scrolling would not trigger.
The purpose of this custom widget is to allow the use of a QToolBox in a limited
area. The stock QToolBox does not provide a minimum size hint that depends on
the size of the pages; it assumes that there is enough room. This subclass sets
the minimal size of the QToolbox. Without this, the size of the QToolbox is only
determined by values in the ui file and therefore causes portability and
localisation issues. Note that the computation of the minimum size hint depends
on the minimum size hints of the page widgets. Therefore page widgets must have
a layout with layoutSizeContraint = SetMinimumSize or similar.
inset-select-all has 3 levels
1. select current cell
2. select all cells
3. select inset from outside.
The second level makes sense for tables (text and math), but not for things like a math fraction.
Introduce a new method Inset::isTable() that allows to detect this case properly and skip level 2.
This is done by implementing the clickable method. It is not possible yet to have the usual left and down arrows, because Qt does not implement them as far as I can see.
Factor the code that triggers row/column selection and fix the logic. Now it is possible to select also at the right of the tabular inset.
When several bufferviews exist for the same inset, the data that depends on the view width have to be BufferView-dependent. While this is the case for several mutable members of InsetCollapsable, some were missing.
This commit makes button_dim_ (renamed from button_dim) and openinlined_ bv-dependent.
Get rid of the hitButton function.
Remove the bv-independent geometry() method and implement editable() explicitely instead.
Fixes bug #9756.
"echo -e" is definitely not portable. Use a plain loop instead.
Also use the automake silent rule mechanism to make the generation of monolithic source files visible.
When the box has a special width, one should not consider that as a fixed width. Otherwise, due to implementation quirks, the width will be set on screen as 1 inch.
A better solution would be to actually set the width by taking in account the contents width, height ans total height. This is not very difficult, but I do not know whether it would workout well in the work area.
Fixes bug #10048.
The purpose of this custom widget is to allow the use of a QToolBox in a limited
area. The stock QToolBox does not provide a minimum size hint that depends on
the size of the pages; it assumes that there is enough room. This subclass sets
the minimal size of the QToolbox. Without this, the size of the QToolbox is only
determined by values in the ui file and therefore causes portability and
localisation issues. Note that the computation of the minimum size hint depends
on the minimum size hints of the page widgets. Therefore page widgets must have
a layout with layoutSizeContraint = SetMinimumSize or similar.
Ask the user for removing bindings when using the "restore" button (#9174).
Fix the already-bound-key detection logic.
Don't forget to trigger the search when initializing the search LineEdit with
its former value.
Remove in particular all comparisons < and >= involving HullType.
Add a guard to make sure that mutate() only operates on types it has been
designed for. Then I figured I could use this new knowledge to give feedback
when math-mutate is not implemented via getStatus(). (To test this, insert a
regexp in Advanced Search & Replace and try to change it into a standard
equation via the contextual menu.)
AMS align environment should have some spacing between odd and even columns.
Add a new virtual method displayColSpace() to InsetMathGrid, InsetMathHull and
InsetMathSplit.
A longstanding problem... (related: #1861)
The columns in AMS math environments have a fixed alignment (colAlign() in
InsetMathGrid.cpp). We set this alignment for display (Georg's
displayColAlign()) in InsetMathHull and InsetMathSplit. This is done according
to tests and documentation for the various environments.
There is also some mechanical code factoring via colAlign().
Finally, I disable setting the horizontal alignment in InsetMathSplit, which has
no impact on the LaTeX output, and has no longer any impact on the screen. (As
for vertical alignment I discovered that it was in fact customisable for
\aligned & friends! I hope that the more faithful interface will let other
users discover that too.)
The offending code appears to have been introduced a long time ago. My
understanding is that it is no longer relevant. Notably, it only appears on copy
and not on cut, which tells us that: 1) it should be safe to remove it, 2) we
should remove it for consistency.
With Qt 5, our code did not correctly detect when icons were
available and thus tried to use nonexistent icons.
QIcon::hasThemeIcon(theme_icon) returns true when theme_icon is
empty. We now rely on the behavior that QIcon::isNull() returns true
if the icon is empty.
The same code is used with Qt 4 and Qt 5.
This is used when scaling graphics previews. It is also used on a rare occasion
to scale instant previews when the user's configuration mixes low-dpi and
high-dpi monitors (#10114).
With this change, it becomes possible to run the following commands:
inset-forall Separator:latexpar char-delete-forward
inset-forall Separator:parbreak inset-modify separator plain
The first one deletes all latexpar separators. The second one turns parbreak
separators into plain separators. This is safe, flexible, and avoids adding a
new LFUN.
2.1.x allows some document settings to have negative values where
2.2.0rc1 does not (because of the bug fix at 9e166088). If a user of
2.2.0rc1 opens a document from 2.1.x that contains one such negative
value, it will appear as though no change to the document settings
can be saved because 2.2.0rc1 treats the document settings as
invalid immediately on opening the dialog. Further, unless the user
manually goes through each tab they will not see the red text next
to the input that is now considered invalid. This could lead to
confusion for users. One example of such confusion is [1].
The following settings now allow negative values, which is
consistent with 2.1.x. Negative values in these settings do not lead
to LaTeX errors:
- Text Layout tab: the two line edits enabled with "Custom"
- Page Margins tab: all eight line edits
The following settings are not changed by this commit, so they now
(with 2.2.0) do not allow negative values that 2.1.x allowed. This
change makes sense because negative values lead to LaTeX errors in
these cases:
- Page Layout tab: the "Height" and "Width" line edits, which are
enabled when "Custom" is selected
[1] https://www.mail-archive.com/search?l=mid&q=CAGZ2pgXqf27UaAaQ%3De_wFz1fGTa6Yv0iFyS97qu1C7B5R59irg%40mail.gmail.com
An undocumented behaviour of QClipboard::mimeData() is that it can fail on
windows due to the specificities of the windows API that allow a race condition.
In particular it seems that querying the clipboard as soon as the dataChanged()
signal is received favourises this race condition.
Thanks to Trac user bquistorff for the explanation and a proof of concept patch.
This was a regression of 8aa37c43. I did not take into account that end_pos
could be -1, so the code that checked whether a pair of braces needs to be
inserted between two hyphens did not work for that case. Now we check for
the length of text_, which should be done anyway, and only take end_pos into
account when it is not -1.
http://thread.gmane.org/gmane.editors.lyx.devel/161725
These wms have trouble with the fix at b5a2f1c7, probably more precisely with
the trick to force the calculation of the actual sizes before the display
(layout->invalidate() and the code around it).
This patch gets rid of the code that forces the calculation. As a consequence,
the minimum sizes are again incorrect the first time the window is shown. They
are only correct the second time the window is shown. Now here is the trick: LyX
remembers the sizes of windows between sessions. Therefore, as soon as the good
minimum size has been set, the good size is remembered for the next
session. Thus, in the following sessions, even though the minimum size is
incorrect the first time, the dialog still opens with the good size. So the user
does not see the problem in practice, apart from the very first time.
This is meant as a temporary workaround.
* provide GuiApplication::typewriterSystemFont() to get a fixed font consistently
* enlarge fixed font on Mac because of the too small default Qt system font
* use it in source pane, progress view, log view and document preamble editor
Regression at cfeddb929. If a flex inset has no layout upon saving (e.g. if a
module has been deleted) then its name became lost. This checks whether the name
resolution, introduced with the ObsoletedBy tag, comes back empty-handed (which
it will if the layout is not defined). In this case, we do as was done before
cfeddb929.
In addition, the use of support::token to strip "Flex:" off the beginning of the
name introduces a regression if somebody used a name containing ":". This
replaces it with support::split.
This is the same as the parbreak separator and is represented on screen
as the old parbreak. Old parbreak separators are converted to latexpar
separators when they are used for introducing blank lines in the
latex output rather than for separating environments.
Instead, parbreak separators are now represented on screen by a
double line. In essence, latexpar and parbreak separators produce
the same output but are represented differently on screen.
The context menu does not account for latexpar separators and only
"true" separators can be turned each into the other one.
7b1107d7 introduced the following inconveniences which are regressions to 2.1:
* The citation dialog can open with vertical scroll bars in the options
* The citation dialog can open with horizontal scroll bars, especially if the
translated text is longer than the original text (e.g. in FR)
* Resizing the dialog is inconvenient because it increases the gap between the
options. This is unlike before when the dialog could let us see more of the
reference list when enlarging.
This is because the QToolbox that the above commit introduced is not natively
aware of the sizes of its page sub-widgets. The widget is not conceived for this
use, where the space is scarce.
Geometry values provided in the ui file (automatically computed by qtcreator I
suppose) somehow gave the illusion that it worked, but relying on such values is
not portable : it does not take into account the specific theme, font sizes and
localization. This explains why it failed on my side and will probably fail in
other settings too.
Luckily, there is a simple way to make QToolbox suitable for the current use,
which is to add the "missing link" which computes its size based on the minimal
sizes of its pages. The result looks very nice and intuitive. It solves all the
aforementioned issues.
The term LongTable has been deprecated and moreover the renaming makes the interface easier to the eye.
File format updated to 507. (conversion based on jamatos patch)
Layout format updated to 60.
tex2ylx tests updated.
Document EmbeddedObjects.lyx has been updated.
There are two regressions that are fixed here:
* empty rows at the end of a paragraph (think after newline at end of
paragraph or empty line in Verbatim) do not have an end-of-par
marker. This is fixed by removing the early return in breakRow and
letting the whole function be executed. This requires to relax an
assertion in Paragraph::fontSpan. It makes sense here to query
position at the end of the paragraph.
* a newline at the end of a paragraph will be followed by and
end-of-par marker. This is fixed by skipping the end-of-par marker
when a new row has been requested.
The context menu of newline insets was completely greyed out if one clicked
at the right of the inset. Thanks Scott for finding this. The fix is to undo
the cursor movement also for insets without settings, but with a context menu.
According to callgrind, the time taken to display the symbol dialog is spent in
updateSymbolsList. No longer translate strings for every symbol. This speeds
it up more or less by a factor two.
The stmary font has an unusual large descent that was causing a large
gap between lines in the math delimiter dialog because of the \llbracket
and \rrbracket delimiters. The solution is to force Qt using the same
size for all elements of the QlistWidget widget instead of letting it
compute the size of each element.
When a row is broken by for example a display math inset, it is
possible to put the cursor at the end of the previous line using the
boundary setting of cursor.
For newline insets and separator insets, we want to force the cursor
to be before this inset. Also, in the other cases, do not force
boundary property (effectively reverts part of f29e7803).
* breakRow: remove wrong condition that would silently eat the contents of the
paragraph when the window is narrower than left margin
* breakRow: make sure that there is at least one element in each row
* breakAt: when force-breaking a row element, make sure it is not empty. Doing
so may create empty rows and therefore a endless loop.
Fixes bugs #9962 and #10001.
The existing code already avoids merging with typewriter font, but it does not work with LyX-Code, where the typewriter family is inherited. Therefore it is Cursor::real_current_font that must be tested.
Fixes bug #9987.
removeShortcut() restores default settings, therefore was used incorrectly. I
introduce deactivateShortcuts() which only removes assignments.
Clean up a bit the lack of view / model distinction (getting rid of the crashing
code at the same time).
Repair inconsistency of the selection in the "modify" case. (regression at
717d19d3c)
Make the test for existing bindings a bit more robust. (Not perfect yet.)
Focus on the item that has just been added/modified. (cosmetic)
This fixes a failing unit test with 32bit gcc 4.9.3 and -O2 optimization:
It computed 9953 instead of 9954 for Length::inPixels() of value 2342.
The reason for this is probably different rounding behaviour caused by storing
the unrounded value in a processor register (uses 80bit accuracy) vs. writing
it back to memory (uses 64bit accuracy). The unrounded value is very close to
9953.5 (which is not representable as an exact IEEE floating point value).
Apart from that, having a proper function for rounding makes the code more
readable, and has the nice side effect to make Length::inPB() work for
negative lengths as well.
\origin is a transient property in the sense that in a collaborative context
each co-author is going to have a different value for it. Moreover, \save_origin
is a global (lyxrc) setting that cannot yet be deactivated for a single file,
but one author's setting is going to impact other authors, even those who have
set save_origin=false.
There is only one location where lyxrc.save_origin produces an effect, modified
by this patch. With this patch, everything happens as if lyxrc.save_origin was
false whenever save_transient_properties=false.
This is not a file format change. When a file has
save_transient_properties=false but an origin is set (for instance a file
produced before this patch) then the origin produces its effect before the file
is saved. This produces the same effect as if the user decided to disable
save_origin between two sessions.
This concerns InsetPreview, InsetIPA and InsetMathHull.
Caching such a value is bad when opening the same buffer in two views.
In this case, it is not necessary to remember use_preview_ at all,
actually.
Also remove private member dim_ which is not used and remove some trailing whitespace.
Fixes bugs #9085 abd #9957.
Since the low-level version of tabular features is only called by the high-level one, it does not make sense to record undo there. It is much better to do it once in the high-level handler, rather than 37 times (yes!) at lower level when the tabular GUI calls tabular-feature with all the settings at once.
With large tables, this avoids to keep 37 copies of the table in Undo stack.
As an added bonus, this fixes bug #9960.
When an inset is separated from the adjacent string by a space, it is
reasonable to be able to break the string after the space.
Unfortunately, QTextLayout does not do that.
This patch reverts the workaround inserted in 71378268 and replaces it
with a different trick: the string is enlosed between a pair of
zero-width non breaking space characters, so that the leading/trailing
spaces are now normal spaces, where QTextLayout will agree to break
the string.
Fixes bug #9921 for good.
