Using a regular expression to find /src/ or \src\ in a string is overkill,
and since regexes can throw exceptions, it makes coverity nervous.
The new code is simpler anyway.
We have a mix in this file of boolean stored as such or as strings.
This translates to values written as true/false or 1/0 in .lyx files.
In this case, the value of use_minted could only be true, since the
char * pointer is non null.
Also add some else clauses.
Spotted by coverity.
This is a consequence of e91572a0, although it is not clear why. The
contextMenuEvent code of the workarea should not delegate context
menu when it cannot honor it.
Also fix a small memory leak.
Fixes bug #10616.
The code in InsetLabel::updateReferences code changes reference insets
in potentially several buffers. When recording undo, it is important
to use the right undo stack, otherwise crashes can ensue.
Once it is done, it is neccessary to create undo groups as needed.
This is done using UndoGroupHelper. This demonstrates a shortcoming of
UndoGroup helper: if a buffer is encountered in two seperate
occasions, two undo groups will be created for this buffer. This is
not correct.
Fixes bug #10643.
While 522516d9 was too strong and broke mathed, d0acc3e570 is too
lenient and can accept insets (mathed/CommandInset, InsetInfo) that
have a positive nargs() but are not editable (because they encapsulate
something).
Therefore the best solution for now is to use editable() in text and
isActive() in mathed, until those two things are merged.
Part of #10667.
(required because filesystems return listings in undeterministic order)
to generate Resources.qrc and thereby Resources.cpp and the lyx binary
in a reproducible way
Setting LC_ALL=C because sort order might vary with locales.
See https://reproducible-builds.org/ for why this matters.
Fixes#10711.
Pygments versions prior to 2.0 only accept lower case names for lexers.
This commit makes sure to always use lower case names for the language
that is written in the LaTeX file, while retaining the proper casing
for the presentation in the GUI, which is dictated by compatibility
with the listings package. Moreover, if one switches from listings
to minted in a document, the language combo is properly updated even
if the used language had attached a dialect (a concept not shared by
minted), or even when importing a LaTeX document with tex2lyx.
In some (not yet understood) situations, the paragraph metrics cache
is empty in generateSyntheticMouseEvent(). We just avoid a crash in
this case, but there is probably an underlying problem that deserves
being fixed.
Fixes bug #10324.
Both listings and minted allow for many complex options. So, a latex
source can be easily written as
\documentclass{article}
\usepackage{minted}
\usepackage{graphicx}
\usepackage{dingbat}
\begin{document}
\begin{minted}[breaklines=true,
breakautoindent=false,
breaksymbolleft=\raisebox{0.8ex}{
\small\reflectbox{\carriagereturn}},
breaksymbolindentleft=0pt,
breaksymbolsepleft=0pt,
breaksymbolright=\small\carriagereturn,
breaksymbolindentright=0pt,
breaksymbolsepright=0pt]{Python}
def f(x):
return 'Some text' + str(x) + 'some more text' + str(x) + 'even more text that goes on for a while'
\end{minted}
\end{document}
The used text editor can therefore add a mixture of tabs and spaces.
The white space after the options is not a problem and the imported
file compiles just fine, but the validator gets confused and doesn't
validate them. This would entail a difficult editing of the options
only to have them validated. So, better remove the white space.
This commit updates tex2lyx in order to also import minted listings.
For the floating version of a listing, minted uses the listing
environment, a concept that is not shared with the listings package,
towards which our listings inset is geared.
For this reason, a kludge is necessary when importing minted listings
not previously exported by LyX itself.
If the floating listing contains only a caption and a label (other
than the listing itself), everything is fine and the import is (or
aims to be) perfect. But, as in all other floating ebvironments,
one can also stick there other elements, which don't have a place
in the listings inset. So, in order to avoid a data loss, tex2lyx
sticks everything into the caption. In this way, things may be
rearranged in the GUI, if necessary. There is no other way, apart
from a complete redesign of the listings inset, of course. However,
I think that this is an acceptable compromise.
This removes the use of rectText in RenderButton. The fact that this
gave different spacing than buttonText was a problem.
Now buttonText requires to specify
* the offset, so that INSET_TO_TEXT_OFFSET is not used anymore in
src/frontends/, which will be useful later.
* the background and frame color, in replacement for the hover state.
Remove the methods button() and buttonFrame() from GuiPainter.
Remove some unused header files.
Fixes bug #10704.
If
1. the inset is deleted before pasting its contents in the outer text, and
2. the inset contents begins with an inset, and
3. the clone of this inner inset is allocated at the memory location just
made free,
then bad things can happen.
To avoid this, we delete the inset only after its contents has been pasted.
Fixes bug #10667.
This is the same issue that was addressed in the all_sel case at
695b0cc3. The rounding issue only happens at specific zoom and
jusification values.
Fixes part of #8883.
The test added at 359aef92 was incorrect. Actually, Inset::editXY
returns the inset when it is edited and also when it is not, which
can be confusing. So if we are unlucky and the slices positions in the
text area and in the inner inset match, the code below triggers and
many bad things can happen.
Also improve the documentation of Inset::editXY and TextMetrics::editXY.
Fixes#10691.
In the document settings allow to immediately switch from one
package to the other for parameters validation without the need
of first applying the changes.
Several comments in the code point to the fact that hidden buffers are assumed
to be clean.
The other solution was to adapt the closing & saving code to take into account
hidden dirty buffers. Experience shows that it is more useful to unhide the
buffers at the moment of the external modification, in the context of a git
workflow where one has to reload the modified children buffers one-by-one.
Fixes crash at #10603
When the Buffer is notified to be externally modified, check that the
file contents have changed using the checksum.
Document the shortcoming of FileMonitorBlocker.
Fixes#10642.
Starting at 61b2bd5e, boost::bind was progressively replaced with
std::bind. They are not interchangeable though. boost::bind implements
the tracking of boost::signals{,2}::trackable objects. Now that
std::bind has completely replaced boost::bind, tracking never occurred.
This commit replaces boost::signals2::trackable with the new preferred
boost::signals2 methods: scoped_connections or slot::track_foreign. The
support::Trackable class introduced is less safe but easier for transitioning
old code.
Fixes the crash at #8261.
- Remove "chapter" and "section" as this are to be passed as class
options and are otherwise not recognized.
- Let onoff=false for all TRUEFALSE parameters, otherwise only the
form option=true is accepted and option=false does not validate,
generating a lot of confusion.
Minted provides for captions only with floating listings. However,
listings always allows captions, and our machinery is geared accordingly.
So, instead of discriminating the floating and non-floating cases,
always allow for captions with minted, too. When minted does not provide
for a caption, we will provide one.
In the child document case the caption will always be before the listing,
while for the inset case the caption will be before the listing if it
is entered as the first line, after the listing otherwise.
We stored the combo position index, but this changes on engine switch.
This also fixes a crash due to out-of-bound index at engine switch.
Fixes: #10692
The test added at 359aef92 was incorrect. Actually, Inset::editXY
returns the inset when it is edited and also when it is not, which
can be confusing. So if we are unlucky and the slices positions in the
text area and in the inner inset match, the code below triggers and
many bad things can happen.
editXY() should probably have a documented way to indicate whether the
cursor has entered the inset, although the test used right now is
probably OK. The inset value is useful mainly for context menus or
tasks that need to know which inset the (x, y) coordinates
point to.
Note finally that the documentation of TextMetrics::editXY is
incorrect concerning the return value. It will return a non-null value
if the cursor is on a not editable inset.
Fixes#10691.
This is a follow-up to e194c9ce. There was actually no reason to let
InsetCollapsable and InsetText draw their own background. It is more
correct to remove the existing code and let the generic
Inset::drawBackground take command.
This allows to revert d207e85c.
Fixes bug #10587.
It was possible to insert a caption in a listing not marked as
floating. This didn't cause errors but the caption simply was
disappearing in the output.
When choosing a code language that has dialects in the languages
combo box, the dialects combo gets activated also when minted is
in use. However, minted does not support the concept of dialects
and the combo should not be enabled. This is harmless because the
dialects are simply ignored and the dialects status is restored
after apply, but it may fool the user in thinking that a dialect
can be actually selected. So, always disable it with minted.
This is a follow-up to e194c9ce. There was actually no reason to let
InsetCollapsable and InsetText draw their own background. It is more
correct to remove the existing code and let the generic
Inset::drawBackground take command.
This allows to revert d207e85c.
Fixes bug #10587.
Update the listings inset to optionally use the minted package
(instead of the listings one) for typesetting code listings.
Only one of the two packages can be used in a document, but it
is possible to switch packages without issues if the used options
are the same. If a switch is made and the options differ, one needs
to manually adjust them if they were entered in the advanced options
tab, or apply again the gui settings.
Note that minted requires the -shell-escape option for the latex
backend and the installation of additional software (python pygments).
When inserting a column in tabular, the border of the new column
should be copied from the border of the (previously) right-most
column.
Also remove a redundant line. The line
setRightLine(i, true);
was only reached if rightLine(i) was true.
Patch from Daniel Ramöller.
Make sure to properly nest \begin{lang} and \end{lang} tags even
when no language package is selected. In this case, LyX assumes
that babel is being used, so the language names might be wrong
if the user arranged for using polyglossia in the preamble.
Nevertheless, we assure that the produced output is syntactically
correct, so that by adding proper preamble code a correct output
is still possible.
When an inset wants to use the whole available width, it is necessary
to take into account that some of this width may already be taken by
the end-of-paragraph (pilcrow) marker.
Fixes bug #10537.
The RenderButton object now has a inherit_font_ property. It is set
depending on the value of Inset::inheritFont().
This is a better fix than 55533804, which caused bugs #10682 and #10677.
Fixes bug #10258
Do not take the optional arguments from the first paragraph, but from the
paragraphs whose layout have no arguments, consistently with the code in
InsetArgument::updateBuffer (i.e. what was shown on screen).
With these changes, equation numbers are shown properly on screen.
When setting is default, we guess the side using these two rules
* ams(art|book) and siamltex classes are leqno by default. This is
signalled because the classes provide "leqno" (in amsdefs.inc). If
there are other classes that do this in output, the relevant classes
should be updated.
* the language arabic_arabi also sets leqno by default. This is
currently hardcoded for lack of a better idea.
Besides, a few bugs are fixed:
* use mathrm instead of mathbf for numbers metrics
* set spacing between maths and labels in inches
This commit replaces the string math_number_before by a proper math_number enum.
Note that the _before naming was misleading. It was chosen at a time
when we were not sure whether leqno was always left or could be right
in RtL documents.
Note that the token in LyX document is still \math_number_before and
this should be changed.
Fixup for 19cc4a1f.
as discussed our support for the formula numbering side should be complete. There are document classes that uses left numbering as default and with the class option "reqno" this can be changed to right numbering. reqno requires the loading of amsamth.
Consider mathbin, mathrel and mathpunct as word separators. This makes
Ctrl+{Left,Right} more intuitive, quicker, and more different from {Left,Right}.
This takes into account all the feedback from the discussion on the general
list. Further feedback welcome.
Setting the default working directory to '.' is an invasive change
on Mac and Windows, where the current working directory of LyX when
LyX is started from the GUI is not a reasonable choice for the
default directory in e.g. the "save as" file dialog or the "open"
dialog. A similar situation could happen on Linux distributions (I'm
not aware of any, e.g., POSIX standard that defines that the working
directory of a binary started from GUI should be the home
directory). Thus, it is not clear this default is good on any
platform.
If the user wishes to have the behavior of '.', the description in
the "paths" preferences pane provides the information for making the
change.
For more information, see the discussion at:
https://www.mail-archive.com/search?l=mid&q=635298DE-5028-4BB1-8D8F-A634BA68C420%40gmx.net
This reverts commit 892593fbdc.
- Adds a currentZoom variable which holds the current zoom level.
- The zoom stored in preferences is used as default zoom level (default binding:
M+0).
- The currentZoom is saved and restored via QSettings.
- Adds LFUN buffer-zoom for (re)setting zoom.
This is done by two things:
1/ the equation returns LefAlign as display() value
2/ Inset::indent() return a value (in general 0) that should be added
on the left (or right in rtl) of the inset when it is flushed.
The code that uses these values is in TextMetrics::computeRowMetrics.
The current set of options to provide include names of
the find and replace internal buffers, something out of
reach for the user. Furthermore, options are provided
using a multi-line syntax, which cannot be entered
using the mini-buffer AFAIK.
Length::inPixels(MetricsBase const &) and VSpace::inPixels(BufferView
const &) should be moved respectuvely to MetricsBase and BufferView:
core file are not supposed to use GUI files.
This reverts commit d4ea07705a.
d4ea0770 lead to a compile error with gcc 4.6. The error is likely
due to that version's weak C++11 support.
This commit reverts d4ea0770 in order to preserve compilation with
gcc 4.6 for alpha1.
New special character to mark an optional line break
without inserting a hyphen (ZWSP). See #10585.
Corresponds to the Unicode character U+200B ZERO WIDTH SPACE
This isn't a “space”. It is an invisible character that can be used
to provide line break opportunities.
http://unicode.org/notes/tn27/
While the literal Unicode character can be used in the LyX
file, it is invisible in the GUI.
For visible feedback, the patch adds a new special character "allowbreak".
The small mark is inspired by LibereOffice.
A tooltip is added.
Use Length instead of HSpace for math_indentation and rename it to mathindent.
Get rid of the string version.
Rename (g|s)etMathIndentation() to (g|s)etMathIndent().
Remove the HSpace class altogether.
Some cleanups to parindent support to look like mathindent.
- remove quotes around length
- use "default" for default parindent, instead of an empty string
- Fix the constructor Length(string const &) so that an empty string
corresponds to an empty length (coherent with Length::asString()).
This reverts commit d568846e03.
Unfortunately the used alternative API LSCopyDefaultApplicationURLForContentType
is available with 10.10 and later only and cannot be used therefore. So there
is no alternative to deprecated calls ATM. LyX 2.3 should run on 10.7 at least.
When applying or saving Document Settings, LyX no longer opens or
closes branch insets. The intent of the previous code was to open
branch insets of a branch that is activated, and close branch insets
of a branch that is deactivated.
After some discussion [1], it was decided that the behavior intended
by the previous code was inconsistent with activating/deactivating a
branch in the context-menu of a branch inset, and the previous code
assumed a workflow of the user, rather than letting the user
separate opening/closing branch insets from activating/deactivating
them.
This commit modifies fd6cd728.
[1] https://www.mail-archive.com/search?l=mid&q=20161030220813.3zlp3zgqgomhx35y%40steph
1.) The command check_layout exits with "0", even if the module contains errors.
The new module check_layout.cmake tries to compensate.
2.) Added default style to the test layouts when checking single modules.
Seemingly, when removing an argument from argv, and thus inserting
a null pointer to shorten the array, causes an assertion because
the null pointer is not a valid heap pointer (sic!)
Fixes bug #10440
When trying to do implement a LaTeX feature on screen, it is always
good to see how LaTeX does it, just in case it is easy to implement on
our side.
Then we have a correct output at all DPI sizes.
- LyX has new preamble tags. Although that they are not relevant for LaTeX they must be created by tex2lyx nevertheless
- also fix an issue that the formula indentation was always output
- update the tex2lyx tests accordingly
getPosNearX, which is the only user of x2pos, should always return the
nearest position.
In editXY, there is a need to return the position where the inset
stands, but it is done using checkInsetHit.
This is a simplification of commit eb4a2a19, which has been reverted
at 01f0ab64a.
Fixes part of bug #10569.
Instead of using complicated (and wrong) code, it is better to use
getPosNearX here.
Also simplify the code by removing temporary variables.
Fixes part of #10569.
The code that looks whether neighbor block has a different direction
should look to the left or to the right depending on the direction of
the current block.
Fixes part of bug #10569
This allows to fix distclean properly, since we know that
subdir-objects is used. When it is the case, it is not a good idea for
a Makefile to use a source file which is under the control of another
one. This could not be made to work work with old automake versions
(<1.14).
Therefore we refer directly to object files in Makefile.am instead of
source files. The actually leads to less compilation in tex2lyx.
Update the code here and there to remove compatibility hacks. Update
documentation.
Re-enable the layout test and fix the Length test, which was ovewriting
memory in test_inPixels() because lyxrc did not had a correct layout.
As it was, the comparison buffer was sharing a DocumentClass with
one of the compared buffers. I don't fully understand why this was
causing a problem, since we use a shared_ptr. But this patch creates
a new DocumentClass for the new buffer.
This is preliminary work to make roots look more like in TeX output:
* correct font size for root order
* set minimum size of the root from the max ascent descent of the
font. This is what TeX does.
* fix drawing, and in particular horizontal size.
More needs to be done, in particular:
* handle zooming and dpi correctly by removing hardcoded pixel values.
* factor the code for the two types of roots in one.
With RtL text, the method can be non-monotonic wrt x value (which is a
Qt bug). To work around this, we check whether positions adjacent to
those returned by xToCursor look better. Depending on whether the new
x position is too small or too large, we look backward or forward for
a better solution.
The performance is probably not great, but this is only needed for
user interactions, so the performance penalty should not be a problem.
Fixes#10569.
Coverity flags this code as not handling exception that may happen in buffer().
My own analysis is that this can never happen because isBufferValid()
does check whether buffer_ is null.
Any insght appreciated. The commit should be expeanded to more cases, actually.
The RenderButton object now has this property. It is set depending on
the value of inheritFont() method that is currently only set for
InsetRef, InsetBibtex and InsetCitation.
Fixes bug #10258
There a some exceptions related to the fact that BOOST_ASSERT throws
an unhandled exception, which is fait enough. This is handled by
uploading a modeling file to coverity.
The second batch of issues are related to the use of lexical_cast in
convert.cpp. We use now a wrapper around boost::lexical_cast that does
not throw but return empty strings instead. I am not sure actually of
when lexical_cast could fail.
The special mode used by macros where the macro name is displayed as
grey text in a box is now one of the possible marker types for any
inset. The new code puts the macro name below the text, which means
that only the text below the current line will be moved. This makes
edition much more comfortable. The grey border around the contents has
been removed too.
The marker_type enum has been moved from Inset to InsetMath. A
markerMargin() function returns the horizontal margin required on each
side for the marker. Only the corner-type markers MARKER and MARKER2
need some.
A new BOX_MARKER enum value has been added and is taken care of in
afterMetricsMarkers (renamed from metricsMarkerVertical) and
drawMarkers.
The InsetMath::marker() macro now takes a BufferView pointer as
argument, so that the marker type can depend on editing state.
MathRow::metrics now makes changes to the MathRow object when needed.
The specific metrics/draw code in MathMacro has been removed and
replaced by assertions. Code in addToMathRow and marker is adapted to
reflect the cases where linearization is possible.
Rephrase positively the check box for the output of en- and em-dashes
and disable it when using non-TeX fonts. The state of the check box
is remembered, so that toggling the non-TeX fonts check box does not
cause information loss.
This commit fixes the regression introduced in 2.2 about the
output of en- and em-dashes. In 2.2 en- and em-dashes are output as
the \textendash and \textemdash macros when using TeX fonts, causing
changed output in old documents and also bugs (for example, #10490).
Now documents produced with older versions work again as intended,
while documents produced with 2.2 can be made to produce the exact
same output by simply checking "Don't use ligatures for en-and
em-dashes" in Document->Settings->Fonts.
When exporting documents using TeX fonts to earlier versions, in order
to avoid changed output, a zero-width space character is inserted after
each en/em-dash if dash ligatures are allowed. These characters are
removed when reloading documents with 2.3, so that they don't accumulate.
Handle name prefix (aka "von" part) as a separate entity, just like
BibTeX and Biblatex do. This allows to omit or reposition it in
accordance to the current style ("Goethe, Johann Wolfgang" or
"von Goethe, Johann Wolfgang" or "Goethe, Johann Wolfgang von" are all
valid and used).
LyX's name parser should now be on par with BibTeX's.
This patch removes explicit calls to stat() in the DepTable code. The
original motivation was to get read of a stat() invokation where the
error condition was not checked (spotted by coverity).
It is not clear that the optimization is a gain, but it is clear that
it has a cost: some elements of formulas will not be present in the
position cache.
Fixes bug #10520.
Using this global variable in the class is clearly a bug. If we wanted
to avoid doing it by mistake, the variable should be moved to the LyX
singleton.
Also add an underscore to the private variable formatlist_.
When we have a name with more than two parts, but no "von",
it was coming out as, e.g.:
Obama, Barack Hussain Obama
i.e., with the last name appearing twice.
Also adds a check for names without spaces, which would have given:
Pele, Pele
This was not the original issue at #10582, so that bug is still
open (though I cannot reproduce it).
The error is reported in the GUI, but for the terminal we must write
explicitly to STDERR.
For a specific example of this type of exception, see the previous
commit, 72c3dbd.
If an included file is not found, it seems impossible that the final
output would be correct. Before this commit, when exporting on the
command line, LyX would create the PDF and exit with a zero error
code so unless the user was monitoring the terminal output, they
would not know there is a problem.
This change is consistent with 1a374a93.
Introduce a distinction between being read-only and having the read-only flag. A
buffer is read-only if either it has been externally modified or if it has the
read-only flag.
Coverity complains that we might read strings that are arbitrary
large, and that this can be a security issue. This is a problem in
particular, when we feed these strings to from_utf8(), which coverity
flags as dangerous for some reason.
The best solution would be IMO to model from_utf8() properly, but I do
not know how to do that. Here I try a different solution, where I
cannot read a string larger than 64k from the file.
Let's see whether this removes part of coverity warnings.
Coverity does not find it obvious that p is never negative. Normally
it is the case (because the items have been filtered), but it is
better to play safe.
The added cmake-parameter is:
-DLYX_EXTERNAL_MYTHES=<value>
where <value> is one of
AUTO (Default) Search first on system for mythes (lib and include)
ON Use installed only (errors if not installed)
OFF Compile the provided source in 3rdparty
Instead of using a coverity annotation (that does not work) it is
better to really iinitialize the members of the object, just in case
somebody decides to actually use the DisplayPath() constructor.
Coverity correctly spotted that the existing code creates a temporary
map and returns a value from it. It is not possible to make the map
const& directly because operator[] may change the map.
Therefore, we use map::find instead.
When including files, LyX always searches the user and the system
directory, in that order. This means that when using local layout
files broken down into multiple includes, the various includes should
be specified with a path relative to the user layouts directory
(typically ~/.lyx/layouts), making this very impractical.
This commit allows including local files by specifying their path
as explicitly relative to the main layout file position, i.e., by
specifying their path with either "./" or "../". If the main layout
is not loaded from a local file, the usual search order is used,
even if the path are explicitly relative. So, for system layouts,
both "Input ./name.inc" and "Input name.inc" are equivalent.
It extended QToolBox with size calculation to fix UI issues with the previous
design of GuiCitation. Since it always needed some kind of hack and since
QToolBoxes do not appear so popular, it probably won't be used anymore.
Because latex allows to do so, and there is no easy way to achieve this.
This was apparently implemented to allow cycling between the various dash
types, but it was a bad idea bringing no benefit and causing griefs.
Previous fontspec loaded xunicode internally, for recent version, this
is no longer desired. However, we still need it for tipa emulation.
We use fontspec's trick to bypass XeTeX test with LuaTeX.
Now the selection is not done by the inset, but by the MathData
itself. This allows for some code simplification and avoids an
extra redraw.
Additionally, this fixes the selection inside macros, which was broken
by the new MathRow code.
Useful to cache copies of objects, including shared_ptrs. No risks of dangling
pointer, and avoid naked pointers in the source.
Fix memory leak when compiling with Qt5.
Now backspace and delete in text will select non-empty math and text insets
before deleting them. This is consistent with what happens in math already.
This is implemented for InsetText as well but can be disabled in case of
negative feedback.
This can be set for any sort of inset with the new virtual method
Inset::confirmDeletion.
New option "force" for the LFUN_*_DELETE_* commands, that bypasses the
confirmDeletion check.
The special mode used by macros where the macro name is displayed as
grey text in a box is now one of the possible marker types for any
inset. The new code puts the macro name below the text, which means
that only the text below the current line will be moved. This makes
edition much more comfortable.
The marker_type enum has been moved from Inset to InsetMath.
A new BOX_MARKER enum value has been added and is taken care of in
afterMetricsMarkers (renamed from metricsMarkerVertical) and
drawMarkers.
The InsetMath::marker() macro now takes a BufferView pointer as
argument, so that the marker type can depend on editing state.
MathRow::metrics now makes changes to the MathRow object when needed.
The specific metrics/draw code in MathMacro has been removed and
replaced by assertions. Code in addToMathRow and marker is adapted to
reflect the cases where linearization is possible.
From now on \kern and \mkern remain as ERT as long as the length is invalid.
Fixes#10539 (regression at 10c8d51b).
The only way to produce an InsetMathKern now is via parsing (i.e. file opening
or copy-paste). This is because there has never been any sensible way to input a
valid InsetMathKern, but this is another issue.
Since in InsetMathNest::cursorPos we do not know what is the value of
the row element before value of a given BOX, it does not make sense to
set the cursor at a given offset from the start of the MathData
object.
Therefore here we set the cursor in the middle of the MathData object,
which unfortunately may or may not be visually centered wrt the BOX.
The best solution would be to use the MathRow data here, but
unfortunately this is not completely trivial.
This patch replaces 7917ebcc4.
Horizontal space is now added for linearized macros too.
Vertical space handling is done in a separate method.
This is in preparation for handling of 'box' macro editing mode in
MathRow.
The current version was wrong for non-English dialogs, and even for
the English one, due to the translator commands that were not removed
for calculation (as in "Formats[[output]]").
Candidate for stable.
This adds support for the chapterbib package, but also adds ways to
produce this sort of multibib with biblatex and bibtopic (which are
both incompatible with chapterbib).
File format change.
InsetMathDelim does not need markers because the delimiters are
visually enough.
CommandInset (like InsetMathRef) does have cells, but they are hidden
(only for storage). Therefore the default InsetMath::markers() method
mistakenly added markers. In practice, the markers were never active
(since the cursor cannot go into the inset), but some space was
reserved for them.
This allows to somewhat simplify the text and avoid some uses of
Paragraph (in the long term, RowPainter should not have to access
these things).
At the same time do a small cleanup to RowPainter: rename
text_metrics_ to tm_, remove pm_ and width_.
The enum values BEG_MACRO/END_MACRO and BEG_AR/END_AR are replaced by a
single BEGIN/END pair.
The MathRow code now only knows about insets and math arrays.
New hooks (before|after)(Metrics|Draw) are run by the MathRow code
as needed. They are actually also used internally by the MathMacro
code.
The gain is that most traces of explicit macro handling (and
the MathRow::Element::macro member) have been removed from MathRw.cpp.
The next step will be to extend the tokenizing process to allow for
linearizing insets other than macros.
* Convert the kerning into a proper right margin for mathnormal, mathscr and
mathcal (fonts with \fontdimen2 == 0 as per rule 17 from TeXBook).
* Simulate the fact that characters in mathnormal fonts have a 0-width left
bearing.
* Implement subscript positioning in the case of rule 17 using negative italic
correction (kerning_).
File format change.
This allows for the relevant InsetCommand-based dialogs (such as
citation text before/after, Bibitem label, hyperlink name etc.)
to provide both the input of verbatim code or text that is transformed
to proper LaTeX code.
Some dialogs (Nomencl, Href) already had some methods (although they
could not be toggled), which are now centralized and streamlined.
The initial work of this patch has been done by Georg Baum (see
http://www.lyx.org/trac/attachment/ticket/2751/x.diff)
Fixes: #2751, #8227.
When using Qt stuff in breakAt, it may happen that the row is broken
after an hyphen (whereas the old code would only consider spaces).
The fact that we abuse the Row::right_boundary() property to detect when
a row should be flushed broke justification when a row is cut at an
hyphen.
Fix this by introducing a new Row::flushed() property and set it as needed.
The code that tries to decide whether it is worth splitting a given
text row element had a shortcoming: it did not take into account the
left margin of the new row that would be created.
The problem is that this left margin is not the same as the left
margin of the current row, because there can be for example
indentation effects.
To fix this problem, we pass the amount of available space on the
next row as a parameter of Row::shortenIfNeeded.
Note that there is no need to care about RtL row elements at this
point, since the bidi algorithm will be applied to the row
subsequently.
This avoids some duplicate code. Note that the return value of
Paragraph::getAlign had to be changed. I suspect it was set to char to
avoid reading one header file in Paragraph.h.
Whenever an argument delimiter is used inside the argument, the argument
needs to be grouped, that is
\cites({text (text) text})
or
\cite[{text [text] text}]
This fixes the original case reported in #2751 which is independent
from the general issue that the pre- and postnote field take literal
code.
Starting with Qt 5.6, setting the environment variable QT_SCALE_FACTOR
makes everything accordingly bigger. So, if QT_SCALE_FACTOR=1.2, all
text and GUI elements are rendered 20% bigger. However, if an application
does not account for this, everything will also look "blocky".
With this commit, all text and images will be scaled remaining sharp.
This works whether a HiDpi screen is used or not, but is mostly useful
with a HiDpi screen, as all GUI elements are more spaced apart and one
can use the mouse for selecting things without requiring a high precision.
These are biblatex-specific multicite commands that allow for multiple
pre- and postnotes, as in:
\cites(pre)(post)[pre1][post1]{key1}[pre2][post2]{key2}...
with an optional general pre- and postnote, which applies to the whole
list (like [][] in normal cite commands) and an optional pre- and
postnotes for each item, so that pagination can actually be specified in
multi-cite references, as in:
(cf. Miller 2015, 2; furthermore Smith 2013, 23-23; Jenkins 2012, 103,
also refer to chapter 6 in this book)
See the biblatex manual, sec. 3.8.3., for details.
File format change.
It seems that QTextLayout does not handle properly a single character
with 0 width. This breaks drawing of things like \not.
Actually the problem had been worked around already in lib/symbol. The
work around can therefore by removed now.
[additionally, remove extra spacing from \mapsto, \Mapsto]
Add a pixel gap around boxes.
When a box is invisible, its width should be null (but keep the weight
to avoid drawing problems (think empty sqrt in a macro).
Fixes missing outliner names in various situations. Now if the warning "Missing
outliner name" appears in the console, this correctly hints at an actual issue
with the layout.
Biblatex can be used with Japanese, but then, biber (not pbibtex) should
be used as processor.
I this context, bring the jbibtex UI in line with bibtex, allowing for
a selection of alternatives.
This is now set as default. It selects biber for Biblatex (with
fall-back to first bibtex8, then bibtex, if the former is not
installed), and bibtex for BibTeX-based engines.
With this, users do not normally need to care for the processor when
they switch cite engines.
The goal of this patch is to be able to properly remove the space
needed for markers in the case of insets that are inside macros and do
not need these markers. This was attempted at 9a9a6a8, but did not
work reliably.
To this end, the following simplifications are made:
* instead of drawing its own markers, each inset has a virtual method
marker() which prescribes either NO_MARKER, MARKER (normal bottom
marker) or MARKER2 (top and bottom marker). All explicit calls to
(draw|metrics)Markers(|2) are removed.
* the space necessary for the markers is now counted in the
before/above margins in the row structure. Therefore painting will
not happen at (x + 1, y), but just (x,y).
* the methods drawDecoration are removed.
* the helper methods InsetMath::(draw|metrics)Markers(|2) are removed
and replaced by a new function drawMarkers in MathRow.cpp.
Now the marker type is kept in the MathRow::Element object (and set to
NO_MARKER in not editable context) and the marker is accounted for in
MathRow::(metrics|draw).
Moreover, the extra pixel for the marker is taken on the before/After
space if possible. The marker will only require extra space when
before/after is 0.
See comment 168 of #8883 to understand what issues are fixed.
The rewrite of macro_nesting done at 0f15dcc6 was faulty, in
particular since the information should be available also at draw
time. To this end, we revert the patch of the said commit that removes
macro nesting information from MathRow::Element. In the next commit,
we will change the marker code so that MathRow::draw does not need the
nesting information.
Actually the code is now cleaner since the macro nesting stack of
MathRow::metrics can be removed.
When cloning InsetExternal, the tempname_ member of InsetExternalParams
has yet to be initialized. So, trying to remove it causes the warning
"QFile::remove: Empty or null file name".
No one seems to have been adding them `thematically', and it's too
hard to know how to do that, anyway. This at least makes it easier
to scan through the list.
I have verified, by re-generating LFUNs.lyx, that no significant
changes have been made here.
inset.
If the reference is "sec:mysec", then this will output just "mysec".
This is what is needed, e.g., to use refstyle's range commands, e.g.,
\secrangeref{mysec1}{mysec2}
You *cannot* use:
\secrangeref{sec:mysec1}{sec:mysec2}
even if those are the actual labels.
Eventually, I'd like to add native support for this, but I'm a bit
frightened of trying to make the reference dialog support multiple
selections.
This _must_ be increased for xhtml output of fullcite, else we get
fragmentary html code.
I am aware of the reason for this size limit (#8944) and have carefully
checked that this is not affected.
* ifentrytype:<type> whether we are a specific entry type (e.g. "book")
* export: export context (as opposed to dialog or workarea)
* second: whether we are in the second item of a list (useful when you
need to separate by " and " or ", and "
This entails a change of getAbbrAuthor to getAuthorList (the default is
still abbreviated with respect to MaxCiteItems, but the list can be, at
explicit request, shortened or full notwithstanding MaxCiteItems.
This will be used to transfer any single-cite related information from
anywhere to BiblioInfo (instead of the many strings and bools we use
until now).
This is a prerequisite for some forthcoming fixes and enhancements.
Copy-pasting $#\n$ from text to LyX gives the error message:
MathMacroArgument::MathMacroArgument: wrong Argument id
and it is not hard to get a crash soon after.
There are legitimate uses of # not followed by 1..9 in LaTeX and it is good to
parse them correctly when importing from LaTeX.
Following discussion on the list:
https://www.mail-archive.com/lyx-users@lists.lyx.org/msg103012.html
This defines a new behaviour for Ctrl[+Shift]+Arrow in math:
* Left/Right does not enter insets
* Left/Right jump groups of insets that have the same math class ("words")
* Enable Up/Down for consistency.
This was missing for macros defined in lib/symbols. This only affects the
equation splitting since global macros are always linearized. This fixes#10107.
Testcase: Define a math macro \AA, overriding the definition of \AA from
lib/symbols, then insert it in math mode.
* Before this commit: \text{\AA}, and \lyxmathsym{\AA} after deleting \text, but
displayed like \AA.
* After this commit: \text{\AA} is inserted, but one gets \AA after deleting
\text. The output is now consistent with the display and the meaning.
* Expected: only \AA is inserted. This is unfortuately not what one gets; for
this to work, the scope of the macros would need to be resolved upon creating
the inset.
About removing the changeEnsureMath in MathMacro::{metrics,draw} : as it is only
called in edition mode, it only happened for user macros for which no ensureMath
is needed anyway. ChangeEnsureMath should indeed be applied for global macros,
but since they are linearized there is no obvious place to call it.
Next to the cmd name, introduce optional latex names (that might differ
from the cmd name) and aliases (that are "obsoleted by" the cmd).
This enhances portability between the engines.
For biblatex, we need the file name as it was entered in the inset
(abs path, rel path, only file name) in order to resolve it properly
for the export (as in the BibTeX inset intself).
Therefore, we now store a pair<docstring, FileName>.
A FileNamePairList has been added to FileNameList for this purpose.
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg198191.html
The root of the issue is in Buffer::reload() called during "Save As". After
loadLyXFile() there, all the insets have been deleted, and therefore the Inset
pointer GuiView::documentBufferView()->cursor().inset() is dangling. Immediately
after loadLyXFile(), reload() calls updateBuffer() which causes a segfault.
While debugging I got other segfaults caused by the same dangling Inset pointer
in Cursor, notably: 1) a trace identical to the second one from
<http://www.lyx.org/trac/ticket/10520>, and 2) a similar segfault in the
critical path after emergency saving (call to inMathed()).
Having to "refresh" by hand the inset pointer cache in CursorSlice is very
unsatisfactory, but there does not appears to be a consistent strategy for
managing these Inset pointers in CursorSlice.
We use the more comprehensive cochineal package if available and fall
back to the crimson package, if not.
Math support is provided by means of newtxmath
Fixes: #9974, #9976
From: "Joel A. Kulesza" <jkulesza@gmail.com>
Date: Mon, 24 Oct 2016 17:37:58 -0600
Subject: [PATCH] Add "Swap & Reverse" to math delimiter dialog
When "Keep matched" is unchecked, a button becomes enabled to "Swap &
Reverse" the left and right delimiters. This is expected to be of use
with line-wrapped equations featuring one or more set of delimiters that
break across the lines. When "Keep matched" is checked, the button is
visible but disabled.
The most common use case is expected to be the user entering a pair of
unmatched delimiters on the first line of an equation (e.g., "(" and
"(None)"), entering the inner text, going to the next line, and
inserting the opposite set of delimiters (e.g., "(None)" and ")").
This button will negate the need to find the correct corresponding
combination. However, it relies on the dialog's memory of the previous
unmatched set.
This change addresses Ticket #10457
-----------
Modifications by spitz to the original patch:
* Only enable the button if an unmatched pair is selected
* Consider l7n when locating the string "(None)"
* Add an accelerator and a tooltip to the dialog
* Simplify the code a bit
Fixes: #8831
This introduces
* a new inset member isPartOfTextSequence() that returns
whether the inset produces something visible at the current position
in the text flow
* an isOpenPunctuation() test that returns whether a character is in the
'Punctuation, Open' unicode class. This is used instead of just checking
for two (Western, ASCII) opening brackets
It also fixes the isChar() and isLetter() value of InsetSpecialChar,
since some types have not been assigned correctly.
* b `british' (``inner quotation'')
* w >>swedishg>> ('inner quotation') ["g" = Guillemets]
* f <<french>> (``inner quotation'')
* i <<frenchin>> (<<inner quotation>>) ["in" = Imprimerie Nationale]
* r <<russian>> (,,inner quotation``)
Rename "french" to "swiss"
Also rename "single/double" to "secondary/primary" ("inner/outer" in
the UI) and "left/right" to "opening/closing". Note that the inset
identifier string is left as is ("s/d" and "l/r")
The current char-based implementation gets increasingly unreadable,
especially if styles are added that do not follow the strict
single-double paradigm.
The QTextLayout handling is terribly slow on Qt 4.8.7, but some
caching has been added in Qt5 that makes it much faster. For some
reason, it is not that slow with Qt 4.8.1.
Caches are introduced for the three following methods
* width(doctring), controlled by CACHE_METRICS_WIDTH. This cache already
existed, but the code has been cleaned up
* getTextLayout, controlled by CACHE_METRICS_QTEXTLAYOUT (disabled by
default on Qt5, which does its own caching). This is used for pos2x
and x2pos and now for drawing of text too. The previous code used a
trivial caching scheme of the last used QTextLayout, but now they
are properly kept in a QCache. Moreover, the cacheEnabled() property
is enabled for these QTextLayout object (not sure what this does).
* breakAt, controlled by CACHE_METRICS_BREAKAT. This is the only user
of QTextLayout which did not have some kind of caching already.
For some weird reasons related to Argument-dependent look-up, the
qHash(docstring) function has to be defined in std namespace, since
lyx::docstring is actually std::basic_string<wchar_t>.
[NOTE: this version has profiling hooks, enabled by commenting out the line
#define DISABLE_PMPROF
that should eventually be removed.]
The xfrac package is the "state of the art" for "split-level" (nice) fractions.
Character replacements look consistent, scale properly and fit in the line.
Fixes#5220.
A dot in the <lang><side><times> string means: keep current value.
This expert feature allows to change arbitrary quote features in one step.
E.g.,
inset-forall Quotes inset-modify changetype f..
=> change all quote insets to French style, maintaining current side
and times setting
inset-forall Quotes inset-modify changetype ..s
=> change all quote insets to single quotes, keeping style and times
inset-forall Quotes inset-modify changetype g.s
=> change all quote insets to German single quotes, keeping left/right
setting
Any idea where to document this?
All typographic quotation marks are supported, if the proper
LaTeX macros (as opposed to ligatures) are used.
So no need for forcing straight quotes.
This is in line with what babel-hebrew suggests.
* Adjoining closing Single + double quote becomes double + single quote
(for English, Swedish and German, LaTeX export as ''').
* French double quotes are converted to << >> in the LaTeX file and to
double inverted question/interrogation marks in the output, if the font
encoding is set to [None] or OT1 but the global default is T1. (test
for lyxrc.fontenc instead of the document-specific fontenc setting in
InsetQuotes.cpp).
* Quote type ignored for LyXHTML: always "English" quotes used.
See #10451
Also output the right one depending on whether the unit is "mu" or
not. Indeed, the two macros are identical, except that \mkern only
accepts unit mu, and kern does not accept it.
With this patch, both macros accept all units, but on writing beck,
the right one is used.
It may happen (for example with on the fly spell checking) that
GuiFontMetrics::pos2x is called with a negative pos value. Add a
special case for this situation.
Fixes bug #10506
This helper method is used to set the inset dimension cache at metrics
time. However this is already done by the metrics code itself
(MathRow::metrics, TextMetrics::redoParagraph), so that there is no
need to do this same work again in a different place.
Also, InsetPhantom::metrics is removed, since it does not do anything
interesting.
This commit comes with a mild risk attached (it might be that some of
these calls were useful after all!), but all of this is fixable.
This helper method is used to set the inset position cache at drawing
time. However this is already done by the drawing code itself
(MathRow::draw, RowPainter::paintInset), so that there is no need to
do this same work again in a different place.
Note that the inset positions are still set in InsetTabular::draw for
each cell.
This commit comes with a mild risk attached (it might be that some of
these calls were useful after all!), but all of this is fixable.
Up to now Inset::dimension was either a helper function to access
CoordCache, or... something else. This created problems to properly
use it.
In particular, the definition of InsetText::dimension created problems
for child classes. Removing this definition (actually renaming it to
dimensionHelper) allows to streamline the code.
* endInsertRow was incorrectly placed before endResetModel, sometimes leading to
bad access by the view before it was informed that the model was empty. In
fact begin/endInsertRows were redundant with begin/endResetModel.
* Empty blocks are not supposed to be shown. This happened when moving the
cursor. A valid block is now selected intead. Due to the design/optimisation
of the model update, this requires a first update with an empty
model. Simplify the old code.
Tweak the algorithm so that a BOX math row element can have some
spacing. To this end, MathRow::before/after do not look at the type of
an element for deciding when to skip it, but rather to its math class.
In the new setting, the spacing algorithm works on all elements, but
skips the MC_UNKNOWN elements as if they were not present. As a
consequence, the two element types BEGIN and END have been replaced by
a single DUMMY (they can be recognized from their class).
To simply the code, add a new `mclass' argument to the
MathRow::Element constructor (default is MC_UNKNOWN).
Macro nesting is now recorded into the macro inset itself. This allows
the ArgumentProxy inset to determine whether it is editable or not by
looking at its macro.
Remove code in the metrics and draw methods of ArgumentProxy: this
code is AFAICS not active anymore, since arguments are linearized into
math rows.
Use Changer idiom to change locally the values of MecticsInfo::base.macro_nesting.
This is a long standing issue, present since the new math macros
inception in version 1.6. It manifests as a display issue when a
macro with optional arguments appears in the optional argument of
another macro. In this case the display is messed up and it is
difficult, if not impossible, changing the arguments as they do not
appear on screen as related to a specific macro instance. It also
manifests as latex errors when compiling, even if the latex output
is formally correct, due to limitations of the xargs package used
to output the macros. Most probably, both aspects have the same
root cause, as simply enclosing in braces the macro and its
parameters solves both issues. However, when reloading a document,
lyx strips the outer braces enclosing a macro argument, thus
frustrating this possible workaround.
This commit solves the display issue by correctly accounting for
macros with optional arguments nested in the argument of another
macro, and circumvents the xargs package limitations causing errors
by enclosing in braces the macros with optional arguments appearing
in the argument of an outer macro when they are output. This means
that when loading an old document with such macros and saving it
again, the macro representation is updated and will have these
additional braces. However, as such braces are stripped by lyx on
loading, there is no risk that they accumulate.
See also this thread:
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg197828.html
This fixes the "bad keming" of math ERT (in fact wrong metrics) which recently
was worsened by InsetMathChar substitutions and their MathClass spacing.
Also fix a small inefficiency: always prefer:
Changer dummy = (currentMode() == TEXT_MODE)
? pi.base.font.changeShape(UP_SHAPE) : Changer();
over:
Changer dummy = pi.base.font.changeShape((currentMode() == TEXT_MODE)
? UP_SHAPE : pi.base.font.shape());
The former only records and restores a value when the condition is satisfied,
and does not cost anything otherwise.
- Allow using logical values for icon sizes as the standard sizes may
differ among different icon sets
- Do not allow setting sizes smaller than smallIconSize
When the logical sizes differ and the icon set is changed, the correct
sizes are established only after a restart.
Addressing #10481.
This patch adds the new 'needauth' option for converters launching
external programs that are capable of running arbitrary code on behalf
of the user. These converters won't be run unless the user gives explicit
authorization, which is asked on-demand when the converter is about to
be run (question is not asked if the file is cached and calling the
converter is not needed).
The user prompt has a 3rd button so that he/she's not prompted again
for (any converter over) the same document (identified through
buffer->absFileName()).
Two preference options are added:
lyxrc.use_converter_needauth_forbidden disables any converter with
the 'needauth' option, which is meant to force user to an explicit
action via the preferences pane, before being able to use advanced
converters that can potentially bring security threats;
lyxrc.use_converter_needauth enables prompting the user for 'needauth'
converters, or bypasses the check if not enabled, falling back to the
previous behavior.
So, the first option is for maximum security, the second is for
maximum usability.
The current math style should have no impact on \kern1mu. This is another
benefit of a9eb87a8.
Testcase:
\begin{align*}
& \kern1em a\\
& {\scriptscriptstyle \kern1em a}\\
& \kern18mu a\\
& {\scriptscriptstyle \kern18mu a}
\end{align*}
- Adds LFUNs for setting the icon size
- Adds icons sizes to the Toolbars menu
- Uses the Toolbars menu as application context menu
- The context menu can now be user defined in stdcontext.inc
Fixes ticket #10428.
In fact having an extra parameter "bool cond" is no longer useful because it can
now always be emulated with a ternary operator:
Changers dummy = cond ? do_change() : Changer();
* Factor code for easier maintainance.
* Avoid computing metrics several times. This duplication explained the
exponential blowup during the metrics phase for nested fractions (see
b2b87330). This happened in particular when using lyxproofs which heavily uses
nested \dfracs for on-screen drawing.
* Call MetricsBase::changeScript instead of MetricsBase::changeFrac for
\nicefrac and \unitfrac.
Move math style to FontInfo and compute the font sizes for scriptstyle and
scriptscriptstyle according to standard proportions: 0.73 and 0.55.
This is simpler and more accurate. It also fixes the font size of
${\scriptscriptstyle {\textstyle A}}A$ which exposed the limitations of the
previous approach.
There is no reason to reserve pixel space in macros replacement text,
which is not editable. This makes macros more compact and eases the
writing of lib/symbols.
* introduce new InsetMath::drawMarkers and friends that do nothing
when nested inside a macro. This required to move macro_nesting
inside MetricsBase, and to pass MetricsInfo & to metricsMarkers.
* keep track of nesting when drawing rows or macros.
Empty insets should use a minimal amount of space, especially when
they are part of a built-in macro in lib/symbols.
With this change, blue rectangles signal actually editable places.
Empty macros in editable data are shown as grey boxes, but they do not
appear when further nested.
This is done by adding a new type BOX of MathRow::Element object and a
MetricsInfo::macro_nesting that keeps track of macros (and is reset to
0 in editable macro arguments).
* new MathRow class which contains the description of a MathData
object in terms of math class and spacing
+ macros and their arguments used in the MathData object are
linearized (replaced with their contents) so that all math insets
are typeset as a string together. To this end, we introduce a
method addToMathRow to InsetMath and MathData. This method allows
to linearize recursively a MathData object.
+ It is then necessary to set manually the dimension and position of
the macros and arguments.
+ the class class and spacing are computed using the MathClass helpers.
The MathRow data is cached in the MathData object in a bufferview-dependent
way (different dpi for different screens).
* delegate most of the work MathData::metrics/draw to MathRow metrics/draw.
The case of draw is trickier, since many draw() methods rely on their
metrics without any spacing added.
This implements the relevant math typography rules described in the
Appendix G of the TeXbook. More precisely, for each atom
+ the class is computed by implementing rules 5 and 6 of Appendix G
+ the spacing is computed according to the table p. 170
This code is not used at this point.
This done according to the TeXbook. This class replaces the individual
isMathXXX() methods. The mathClass() method (currently unused) is
provided for the following insets:
* InsetMathChar (with a revised list of affected characters)
* InsetMathSymbol: the class is given by the `extra' field
Operators defined in lib/symbols (e.g. \log) are MC_OP
* InsetMathFrac is MC_INNER (except nicefrac and units)
* InsetDelimiters is MC_INNER
* InsetStackrel is MC_REL
* The class of InsetScript is the class of the last element of its
nucleus (yes, it is a hack, but doing it right is more work).
Remove the explicit spacing that was done in the different insets. The spacing
will be reintroduced properly in a forthcoming commit.
* set up a replacement of *, -, and : by the adequate symbols (#9893)
* fix the wrong character selection and operator spacing in \text mode
* hide some internal symbols from the auto-completion.
* Fix spacing in lib/symbols after recent commits about math spacing, as well as
older spacing issues (e.g. \Join).
* InsetMathKern now uses the same em value as other math length commands.
What is nice is that the kerning amount now matches the ones found in the
packages definition (modulo 10mu that lyx currently adds between relations).
Testcase: $\CheckedBox\LEFTcircle\RIGHTcircle\photon\gluon\vcentcolon\dblcolon\Coloneqq\eqcolon\models\hookrightarrow\bowtie\hookleftarrow\Join\APLinv\neq$
This is a long wanted feature, although it does not go all the way to
fix#6604 (private-cut/private-paste).
Additionally, it fixes a crash that can happen when using undefined
branches. This is done by making the action when pasting unknown
branches configurable.
Fixes bug #6570.
An overlong word containing a hyphen could be broken anywhere, instead of after
the hyphen.
Example: compare the line breaking of
aaaaa-aaaaa-aaaaa-aaaaa
with
aaa aaaaa-aaaaa-aaaaa-aaaaa
(with a very narrow window)
This also improves Chinese text in some situations (#10299)
1) Distinguish expanding characters from separators, to fit with Qt's notion of
expanding character which comes from the Unicode std. CountExpanders() is moved
to FontMetrics to fix a discrepancy with the duplicate implementation from
598f7e4a.
2) Make these expanders stretch on-screen proportionally to the em of the font.
If a row mixes large and small text, LyX let us see which spaces are set in the
bigger font.
3) Now that the stretch is defined in ems, add a limit such that an expander
never stretches more than 1.5em to avoid weird and hard to read justified lines.
4) Add a return boolean to setSeparatorExtraWidth for future use.
When \multicolumn{ncol}{align}{content} is parsed and the ncol
parameter is not a numeric value, this parameter is swallowed
and replaced with '1'. Hence, if the file is subsequently saved
a dataloss would occur. With this commit, \multicolumn is not
interpreted when ncol is not a numeric value and is left as is.
See also #10466
It turns out that Cursor::getFont() does not return a fully realized
font in some cases. This patch uses real_current_font instead, which
seems better anyway.
I suspect that all uses of getFont() should be removed, but this is
not code that I know well.
Fixes bug #10478.
This means that, when a string contains high-plane Unicode characters,
the length of a docstring and the corresponding QString will be
different: Qt will encode these characters using several 16bit
characters.
We have additionally to take into account QTBUG-25536, which implies
that sometimes qstring_to_ucs4(toqstr(s)) !=s. It is not clear whether
this bug can be a problem in other places.
Fixes bug #10443.
1. We must always output all (diverging) options, including
default options; if not, default options might get overwritten.
2. Do not output options in \setotherlanguage, since we might have
multiple "other languages" varieties from the same language (such
as naustrian, nswissgerman). And the options are output for the
language switches anyway.
Hence, LaTeXFeatures::getPolyglossiaLanguages() does not have to record
varieties. This was not done correctly anyway, since the map allowed
for one entry per language only.
Math macros can be displayed on screen by providing a different
representation than the one used for latex output. This representation
is actually used by lyx even while it is being updated. This leads to
printing useless error messages on the terminal. For example, a macro
parameter has to be entered as \#1 and, if the macro is already used in
a math inset, lyx prints on terminal the error message "Math parse error:
missing token after \\" as soon as one hits the \ key, followed by
"MathMacroArgument::MathMacroArgument: wrong Argument id: -48" as soon as
one hits the # key. So, this is not a useful information and simply
clutters the terminal output. On the other hand, the input is sanitized
even if one stops input after hitting either \ or #, so that no further
messages are issued. Hence, those error messages are simply pointless.
1/ simplify logic that triggers margin selection painting
2/ fix logic for end of paragraph markers. They are now selected when
there is an end row margin selection.
3/ avoid rounding problems due to int/double conversions.
Also use the exact amount of vertical space TeX adds after a
math display (instead of 1ex) for vertically shifting the box.
We have to use \belowdisplayshortskip here, instead of
\belowdisplayskip, because the math formula is typeset by alone
in a box, and thus there is no following line.
