When document settings are modified, a command
inset-forall Branch inset-toggle asign
is run to open as needed all branches. At the end of the said loop,
the cursor is reset to where it was. However, the cur_after undo
element member is not set because it already had a value.
To make this work as expected, it is necessary in LFUN_INSET_FORALL to
reset the cursor before ending the undo group and to insert a dummy
recordUndo call.
Fixes bug #10097.
Deriving from std::vector to provide helper functions appears a touch
excessive. Use typedef instead and move helper functions to the base class. New
header Toc.h provided to replace forward-declarations.
Remove TocIterator which is useless.
The old name conflicted with the newly introduced Inset::isTable.
Now the meaning is as follows.
* Inset::isTable() is true when the inset is composed of lines and columns
* InsetMathHull::allowsTabularFeatures is true when the current type of hull allows for tabular-like functions.
While a one paragraph large collapsable inset (containing for example a tabular) could be very wide and trigger horizontal scrolling, the code that makes collapsable insets wide when they contain several paragraphs would actually make them narrower in this case.
Typical example is a wide tabular and a caption in a table float, where horizontal scrolling would not trigger.
The purpose of this custom widget is to allow the use of a QToolBox in a limited
area. The stock QToolBox does not provide a minimum size hint that depends on
the size of the pages; it assumes that there is enough room. This subclass sets
the minimal size of the QToolbox. Without this, the size of the QToolbox is only
determined by values in the ui file and therefore causes portability and
localisation issues. Note that the computation of the minimum size hint depends
on the minimum size hints of the page widgets. Therefore page widgets must have
a layout with layoutSizeContraint = SetMinimumSize or similar.
inset-select-all has 3 levels
1. select current cell
2. select all cells
3. select inset from outside.
The second level makes sense for tables (text and math), but not for things like a math fraction.
Introduce a new method Inset::isTable() that allows to detect this case properly and skip level 2.
This is done by implementing the clickable method. It is not possible yet to have the usual left and down arrows, because Qt does not implement them as far as I can see.
Factor the code that triggers row/column selection and fix the logic. Now it is possible to select also at the right of the tabular inset.
When several bufferviews exist for the same inset, the data that depends on the view width have to be BufferView-dependent. While this is the case for several mutable members of InsetCollapsable, some were missing.
This commit makes button_dim_ (renamed from button_dim) and openinlined_ bv-dependent.
Get rid of the hitButton function.
Remove the bv-independent geometry() method and implement editable() explicitely instead.
Fixes bug #9756.
"echo -e" is definitely not portable. Use a plain loop instead.
Also use the automake silent rule mechanism to make the generation of monolithic source files visible.
When the box has a special width, one should not consider that as a fixed width. Otherwise, due to implementation quirks, the width will be set on screen as 1 inch.
A better solution would be to actually set the width by taking in account the contents width, height ans total height. This is not very difficult, but I do not know whether it would workout well in the work area.
Fixes bug #10048.
The purpose of this custom widget is to allow the use of a QToolBox in a limited
area. The stock QToolBox does not provide a minimum size hint that depends on
the size of the pages; it assumes that there is enough room. This subclass sets
the minimal size of the QToolbox. Without this, the size of the QToolbox is only
determined by values in the ui file and therefore causes portability and
localisation issues. Note that the computation of the minimum size hint depends
on the minimum size hints of the page widgets. Therefore page widgets must have
a layout with layoutSizeContraint = SetMinimumSize or similar.
Ask the user for removing bindings when using the "restore" button (#9174).
Fix the already-bound-key detection logic.
Don't forget to trigger the search when initializing the search LineEdit with
its former value.
Remove in particular all comparisons < and >= involving HullType.
Add a guard to make sure that mutate() only operates on types it has been
designed for. Then I figured I could use this new knowledge to give feedback
when math-mutate is not implemented via getStatus(). (To test this, insert a
regexp in Advanced Search & Replace and try to change it into a standard
equation via the contextual menu.)
AMS align environment should have some spacing between odd and even columns.
Add a new virtual method displayColSpace() to InsetMathGrid, InsetMathHull and
InsetMathSplit.
A longstanding problem... (related: #1861)
The columns in AMS math environments have a fixed alignment (colAlign() in
InsetMathGrid.cpp). We set this alignment for display (Georg's
displayColAlign()) in InsetMathHull and InsetMathSplit. This is done according
to tests and documentation for the various environments.
There is also some mechanical code factoring via colAlign().
Finally, I disable setting the horizontal alignment in InsetMathSplit, which has
no impact on the LaTeX output, and has no longer any impact on the screen. (As
for vertical alignment I discovered that it was in fact customisable for
\aligned & friends! I hope that the more faithful interface will let other
users discover that too.)
The offending code appears to have been introduced a long time ago. My
understanding is that it is no longer relevant. Notably, it only appears on copy
and not on cut, which tells us that: 1) it should be safe to remove it, 2) we
should remove it for consistency.
With Qt 5, our code did not correctly detect when icons were
available and thus tried to use nonexistent icons.
QIcon::hasThemeIcon(theme_icon) returns true when theme_icon is
empty. We now rely on the behavior that QIcon::isNull() returns true
if the icon is empty.
The same code is used with Qt 4 and Qt 5.
This is used when scaling graphics previews. It is also used on a rare occasion
to scale instant previews when the user's configuration mixes low-dpi and
high-dpi monitors (#10114).
With this change, it becomes possible to run the following commands:
inset-forall Separator:latexpar char-delete-forward
inset-forall Separator:parbreak inset-modify separator plain
The first one deletes all latexpar separators. The second one turns parbreak
separators into plain separators. This is safe, flexible, and avoids adding a
new LFUN.
2.1.x allows some document settings to have negative values where
2.2.0rc1 does not (because of the bug fix at 9e166088). If a user of
2.2.0rc1 opens a document from 2.1.x that contains one such negative
value, it will appear as though no change to the document settings
can be saved because 2.2.0rc1 treats the document settings as
invalid immediately on opening the dialog. Further, unless the user
manually goes through each tab they will not see the red text next
to the input that is now considered invalid. This could lead to
confusion for users. One example of such confusion is [1].
The following settings now allow negative values, which is
consistent with 2.1.x. Negative values in these settings do not lead
to LaTeX errors:
- Text Layout tab: the two line edits enabled with "Custom"
- Page Margins tab: all eight line edits
The following settings are not changed by this commit, so they now
(with 2.2.0) do not allow negative values that 2.1.x allowed. This
change makes sense because negative values lead to LaTeX errors in
these cases:
- Page Layout tab: the "Height" and "Width" line edits, which are
enabled when "Custom" is selected
[1] https://www.mail-archive.com/search?l=mid&q=CAGZ2pgXqf27UaAaQ%3De_wFz1fGTa6Yv0iFyS97qu1C7B5R59irg%40mail.gmail.com
An undocumented behaviour of QClipboard::mimeData() is that it can fail on
windows due to the specificities of the windows API that allow a race condition.
In particular it seems that querying the clipboard as soon as the dataChanged()
signal is received favourises this race condition.
Thanks to Trac user bquistorff for the explanation and a proof of concept patch.
This was a regression of 8aa37c43. I did not take into account that end_pos
could be -1, so the code that checked whether a pair of braces needs to be
inserted between two hyphens did not work for that case. Now we check for
the length of text_, which should be done anyway, and only take end_pos into
account when it is not -1.
http://thread.gmane.org/gmane.editors.lyx.devel/161725
These wms have trouble with the fix at b5a2f1c7, probably more precisely with
the trick to force the calculation of the actual sizes before the display
(layout->invalidate() and the code around it).
This patch gets rid of the code that forces the calculation. As a consequence,
the minimum sizes are again incorrect the first time the window is shown. They
are only correct the second time the window is shown. Now here is the trick: LyX
remembers the sizes of windows between sessions. Therefore, as soon as the good
minimum size has been set, the good size is remembered for the next
session. Thus, in the following sessions, even though the minimum size is
incorrect the first time, the dialog still opens with the good size. So the user
does not see the problem in practice, apart from the very first time.
This is meant as a temporary workaround.
* provide GuiApplication::typewriterSystemFont() to get a fixed font consistently
* enlarge fixed font on Mac because of the too small default Qt system font
* use it in source pane, progress view, log view and document preamble editor
Regression at cfeddb929. If a flex inset has no layout upon saving (e.g. if a
module has been deleted) then its name became lost. This checks whether the name
resolution, introduced with the ObsoletedBy tag, comes back empty-handed (which
it will if the layout is not defined). In this case, we do as was done before
cfeddb929.
In addition, the use of support::token to strip "Flex:" off the beginning of the
name introduces a regression if somebody used a name containing ":". This
replaces it with support::split.
This is the same as the parbreak separator and is represented on screen
as the old parbreak. Old parbreak separators are converted to latexpar
separators when they are used for introducing blank lines in the
latex output rather than for separating environments.
Instead, parbreak separators are now represented on screen by a
double line. In essence, latexpar and parbreak separators produce
the same output but are represented differently on screen.
The context menu does not account for latexpar separators and only
"true" separators can be turned each into the other one.
7b1107d7 introduced the following inconveniences which are regressions to 2.1:
* The citation dialog can open with vertical scroll bars in the options
* The citation dialog can open with horizontal scroll bars, especially if the
translated text is longer than the original text (e.g. in FR)
* Resizing the dialog is inconvenient because it increases the gap between the
options. This is unlike before when the dialog could let us see more of the
reference list when enlarging.
This is because the QToolbox that the above commit introduced is not natively
aware of the sizes of its page sub-widgets. The widget is not conceived for this
use, where the space is scarce.
Geometry values provided in the ui file (automatically computed by qtcreator I
suppose) somehow gave the illusion that it worked, but relying on such values is
not portable : it does not take into account the specific theme, font sizes and
localization. This explains why it failed on my side and will probably fail in
other settings too.
Luckily, there is a simple way to make QToolbox suitable for the current use,
which is to add the "missing link" which computes its size based on the minimal
sizes of its pages. The result looks very nice and intuitive. It solves all the
aforementioned issues.
The term LongTable has been deprecated and moreover the renaming makes the interface easier to the eye.
File format updated to 507. (conversion based on jamatos patch)
Layout format updated to 60.
tex2ylx tests updated.
Document EmbeddedObjects.lyx has been updated.
There are two regressions that are fixed here:
* empty rows at the end of a paragraph (think after newline at end of
paragraph or empty line in Verbatim) do not have an end-of-par
marker. This is fixed by removing the early return in breakRow and
letting the whole function be executed. This requires to relax an
assertion in Paragraph::fontSpan. It makes sense here to query
position at the end of the paragraph.
* a newline at the end of a paragraph will be followed by and
end-of-par marker. This is fixed by skipping the end-of-par marker
when a new row has been requested.
The context menu of newline insets was completely greyed out if one clicked
at the right of the inset. Thanks Scott for finding this. The fix is to undo
the cursor movement also for insets without settings, but with a context menu.
According to callgrind, the time taken to display the symbol dialog is spent in
updateSymbolsList. No longer translate strings for every symbol. This speeds
it up more or less by a factor two.
The stmary font has an unusual large descent that was causing a large
gap between lines in the math delimiter dialog because of the \llbracket
and \rrbracket delimiters. The solution is to force Qt using the same
size for all elements of the QlistWidget widget instead of letting it
compute the size of each element.
When a row is broken by for example a display math inset, it is
possible to put the cursor at the end of the previous line using the
boundary setting of cursor.
For newline insets and separator insets, we want to force the cursor
to be before this inset. Also, in the other cases, do not force
boundary property (effectively reverts part of f29e7803).
* breakRow: remove wrong condition that would silently eat the contents of the
paragraph when the window is narrower than left margin
* breakRow: make sure that there is at least one element in each row
* breakAt: when force-breaking a row element, make sure it is not empty. Doing
so may create empty rows and therefore a endless loop.
Fixes bugs #9962 and #10001.
The existing code already avoids merging with typewriter font, but it does not work with LyX-Code, where the typewriter family is inherited. Therefore it is Cursor::real_current_font that must be tested.
Fixes bug #9987.
removeShortcut() restores default settings, therefore was used incorrectly. I
introduce deactivateShortcuts() which only removes assignments.
Clean up a bit the lack of view / model distinction (getting rid of the crashing
code at the same time).
Repair inconsistency of the selection in the "modify" case. (regression at
717d19d3c)
Make the test for existing bindings a bit more robust. (Not perfect yet.)
Focus on the item that has just been added/modified. (cosmetic)
This fixes a failing unit test with 32bit gcc 4.9.3 and -O2 optimization:
It computed 9953 instead of 9954 for Length::inPixels() of value 2342.
The reason for this is probably different rounding behaviour caused by storing
the unrounded value in a processor register (uses 80bit accuracy) vs. writing
it back to memory (uses 64bit accuracy). The unrounded value is very close to
9953.5 (which is not representable as an exact IEEE floating point value).
Apart from that, having a proper function for rounding makes the code more
readable, and has the nice side effect to make Length::inPB() work for
negative lengths as well.
\origin is a transient property in the sense that in a collaborative context
each co-author is going to have a different value for it. Moreover, \save_origin
is a global (lyxrc) setting that cannot yet be deactivated for a single file,
but one author's setting is going to impact other authors, even those who have
set save_origin=false.
There is only one location where lyxrc.save_origin produces an effect, modified
by this patch. With this patch, everything happens as if lyxrc.save_origin was
false whenever save_transient_properties=false.
This is not a file format change. When a file has
save_transient_properties=false but an origin is set (for instance a file
produced before this patch) then the origin produces its effect before the file
is saved. This produces the same effect as if the user decided to disable
save_origin between two sessions.
This concerns InsetPreview, InsetIPA and InsetMathHull.
Caching such a value is bad when opening the same buffer in two views.
In this case, it is not necessary to remember use_preview_ at all,
actually.
Also remove private member dim_ which is not used and remove some trailing whitespace.
Fixes bugs #9085 abd #9957.
Since the low-level version of tabular features is only called by the high-level one, it does not make sense to record undo there. It is much better to do it once in the high-level handler, rather than 37 times (yes!) at lower level when the tabular GUI calls tabular-feature with all the settings at once.
With large tables, this avoids to keep 37 copies of the table in Undo stack.
As an added bonus, this fixes bug #9960.
When an inset is separated from the adjacent string by a space, it is
reasonable to be able to break the string after the space.
Unfortunately, QTextLayout does not do that.
This patch reverts the workaround inserted in 71378268 and replaces it
with a different trick: the string is enlosed between a pair of
zero-width non breaking space characters, so that the leading/trailing
spaces are now normal spaces, where QTextLayout will agree to break
the string.
Fixes bug #9921 for good.
We open the input file now twice: The first time in latin1 encoding to read
the document encoding from the preamble. This does always work, since
traditional TeX does not allow non-ASCII contents without an encoding changing
command (except for comments, but we do not need them, and using latin1 rather
than utf8 ensures that they do not produce an iconv exception, but are simply
recored with wrong characters), and we do detect the utf8 based TeX engines
XeTeX and LuaTeX as well. The second time we open the file directly with the
document encoding.
This fixes a few tex2lyx tests on OS X, since changing the encoding of an
open file steam does not work with clang on OS X. Files using more than one
encoding are still broken, but all single-encoding files are fixed now.
Changing the codecvt_facet of a file stream after the file has been opened
does not work with clang on OS X. Therefore we avoid it if possible (i. e. the
new encoding is the same as the old one).
This does not make any difference currently, since the only instance of the
Preamble class is a global one, but it is cleaner and will be needed for
parsing the encoding with a second Preamble instance.
This is a fixup to commit cdb9f043, which fixed bug #9757.
It is necessary to make a special case for inserting an InsetCaption
in a tabular cell, because this commonly happens in longtable mode.
Fixes bug #9945.
* Increase LyX format
* New function convert_info_insets in lyx2lyx_tools.py
Use this function in the future for future updates of info insets
* Convert "inset-modify tabular" to "tabular-feature" in info insets
* Remove icon naming hack regarding "inset-modify tabular"
The tabular-features LFUN was merged with "inset-modify tabular" when
simplifying the tabular dialog at b5049e7. This choice later indirectly caused a
few regressions (#7308, #9794).
I reintroduce tabular-feature to allow more flexibility for user
commands, whereas "inset-modify tabular" is now reserved for the tabular
dialog. In particular, inset-modify tabular is no longer caught by math grid
insets. The name tabular-feature is kept to avoid renaming icons.
Known issues:
* After successfully applying a tabular command, the cursor is truncated to the
table.
* Note that the tabular dialog still has similar issues that are inherited from
the achitecture of the dialog menu. For instance the pref change can be
mis-dispatched to an inset inside a cell and cause an error, for instance:
Lexer.cpp (934): Missing 'Note'-tag in InsetNote::string2params. Got
tabular instead. Line: 0
Maybe the inset-modify LFUN should be modified to treat commands coming from
the wrong dialog (by checking the type) as unknown and undispatched so that
the parent can get it. In that case a non AtPoint variant of inset-modify
could be reintroduced in order to generalise tabular-feature. See:
http://mid.gmane.org/n4rdk1$efj$1@ger.gmane.org
External processes cannot access files which are open in LyX. Therefore the
temp files created by the external inset need to be closed right after
creation. The symptom was that the date inset did not produce any outout on
windows (bug 9925). This change reverts a small part of f09a9fe2.
Although the date inset is unimportant and will probably be removed, this
change is important for all external insets that make use of temp files.
Unfortunately the footmisc package does not work together with hyperref:
Before 0bf8b8a1, a footnote in a section title was created as a link in pdf
outpout, after 0bf8b8a1 ist was no link anymore. For now we revert to the old
code, and wait until the footmisc and hyperref packages are made compatible.
The important thing is actually not the date inset, but the converter
machinery, which did convert the time stamps of two unused freshly created
temp files, which does not make sense, and did work before f09a9fe2 only by
accident.
This fixes the date inset on linuy, but not on windows, probably due to
different file locking semantics.
AMS align environment should have some spacing between odd and even columns.
Add a new virtual method displayColSpace() to InsetMathGrid, InsetMathHull and
InsetMathSplit.
I have no clue why this was automatically committed, I just applied the path, nothing more.
This reverts commit bb5470b5d1.
# Conflicts:
# src/mathed/InsetMathGrid.cpp
# src/mathed/InsetMathSplit.cpp
AMS align environment should have some spacing between odd and even columns.
Add a new virtual method displayColSpace() to InsetMathGrid, InsetMathHull and
InsetMathSplit.
A longstanding problem... (related: #1861)
The columns in AMS math environments have a fixed alignment (colAlign() in
InsetMathGrid.cpp). We set this alignment for display (Georg's
displayColAlign()) in InsetMathHull and InsetMathSplit. This is done according
to tests and documentation for the various environments.
There is also some mechanical code factoring via colAlign().
Finally, I disable setting the horizontal alignment in InsetMathSplit, which has
no impact on the LaTeX output, and has no longer any impact on the screen. (As
for vertical alignment I discovered that it was in fact customisable for
\aligned & friends! I hope that the more faithful interface will let other
users discover that too.)
When hitting Enter after a non-standard layout a plain separator is
now inserted. This seems to be preferred and more in line with what
is obtained with the "Alt+M P" shortcut.
Increment LyX format to 504.
With this new parameter, the user can indicate that some other parameters that
are frequently switched must not be recorded in the file (as if they were a
setting specific to the user or transient, rather than a document setting). This
will play nicer with version control systems.
See the discussion, e.g.:
http://thread.gmane.org/gmane.editors.lyx.devel/157824/focus=157993 (third
solution mentioned)
TODO:
* The interface remains to be set up. We cannot change this setting from LyX
for now.
* If save_transient_properties is false, we should read the user setting as a
per-user-per-document (session) setting (e.g. like the cursor position).
* Once the above is done, we can treat \justification the same way (but it would
be even better if \justification was moved to lyxrc).
The current behaviour of the \origin parameter replaces relative file names
with the absolute original names if a document has been moved even if the
files have been moved as well. This behaviour is annoying e.g. for editing the
LyX docs in a git checkout.
Now file names are only replaced if the referenced file sdo not exist.
Simplify the logic for language package selection and make it more consistent:
Use polyglossia with non-TeX fonts (system fonts/Unicode fonts) for all
export flavours (XeTeX, LuaTeX, DVI-LuaTeX), if the language package setting
is "auto" and there is no language not supported by Babel and no package
providing Babel.
This solves some Babel-related autotest cases and leads to some new failures
due to the polyglossia language nesting problem.
The lib/unicodesymbols part is based on work by Günter Milde:
Both, \r{A} and \AA (rsp. \r{a} and \aa) are equivalent standard LICR macros
for Aring/aring as well as the deprecated "angstrom sign" character (212B).
However, with \AA for 212B and \r{A} for 00C5, tex2lyx converts \AA to the
deprecated "angstrom sign" which is missing in many fonts including the
Unicode version of Latin Modern.
I added the normalize_c() calls so that tex2lyx prefers the precomposed forms
(these are better editable in LyX) and the deprecated flag.
The conversion is not completely correct yet, but adding the test before the
fix has the advantage that the fix can easily be documented by changing the
test reference.
whose children is also a child of another buffer, then try to close that
one.
The problem is that we do not check properly to make sure that the child
is not a child of some other buffer. Now we do.
whether a given child Buffer is also a child of some other parent.
Then do the releasing or resetting where this method is called.
There should be no change of behavior with this patch.
Improve the test whether cursor has moved in Cursor::posVisLeft. The code for posVisRight had already been fixed for #5764 at 0730c923, but this replaces both tests by the proper == operator.
Fixes bug #9913.
By initializing 'to' to a value, the code made it seem like that
value mattered. But the value is overwritten in getWord().
Further, now if 'to' is used before it is initialized, there might
be a useful compiler warning that could point to a bug.
Gcc STL debugging feature asserts when swapping an object with itself. This happens in some cases with math grids that have only one column.
A quick review of other uses of swap() in the code base did not reveal any other dubious case.
Fixes bug #9902.
At d449e7e6 it has been decided that submenus are going to be displayed even if
all their items are disabled. Here we make an exception for OptSubmenus.
Example of submenu no longer shown: Insert > Insert Regexp
Example of submenu always shown: Edit > Math > Limit Type, Macro Definition
\output_changes is now output at a distance from \tracking_changes.
Since both parameters can be seen as per-user preferences, they can cause
undesirable merge conflicts, in a multi-author setting, were it treated as a
single block by the version control system, as was the case before this patch.
After d5a5fbb8, as indicated in the commit log, it remained to make sure that
the sub-menus of the navigation menu showing the TOCs are generated in a delayed
fashion, to avoid corner cases regarding performance when documents have very
lengthy tocs (e.g. in a document with 1000 sections it takes a few hundreds
milliseconds for the menu to be refreshed). But this idea actually requires
substantial changes to the way menus are computed, so it is not for now.
In the meanwhile, I reintroduce a max size for menus, after which it is cut
off. This differs from the one that I removed at d5a5fbb8 in two ways: 1) if
there are more items than the max size, then we still show something instead of
nothing, 2) we allow ourselves to rely on qt's scrollable menus and therefore
allow bigger menus than before the above commit. The philosophy is that it is
better to show something than nothing, that it's better to show a scrollable
menu than to cut the menu to fit the screen, and that beyond a certain size the
scrollable menu becomes useless anyways.
It is a bad idea to have a QObject variable that oulives the main QApplication object. See for example:
https://www.ics.com/designpatterns/book/globals.html
Here the QTextLayout object was static to the anonymous namespace getTextLayout function, and got destroyed after the freetype renderer had been disposed of by QApplication.
This causes segmentation faults when quitting LyX on some systems.
This patch moves the cache together with other GuiFontMetrics caches. It means that one will have one such QTextLayout per font type, but this will not change much.
Preliminary work for addressing #7790. Thanks to Richard for providing initial
files this is based on.
Adding to TextClass:
OutlinerName <string> <string>
(the second string is translated)
e.g.:
OutlinerName thm "Definitions & Theorems"
Adding to Layout:
AddToToc <string> (default "", means no)
IsTocCaption <bool> (default 0)
e.g.:
AddToToc thm
IsTocCaption 1
Adding to InsetLayout:
AddToToc <string> (default "", means no)
IsTocCaption <bool> (default 0)
e.g.:
AddToToc literate
Adding to inset arguments:
IsTocCaption <bool> (default 0)
The active/inactive status of hfills was not checked in numberOfHFills.
The code is reorganized a bit, but the important part is the change in the above function.
Part of bug #9870.
This crude caching mecanism is useful in the particular case of a screen with many misspelling dotted lines. In this case, it is necessary to build a QTextLayout in order to know where to put the start/end of the spell line. Since rows typically contains text snippets longer than a word, we may be in a situation where the same QTextLayout is constructed repeatedly.
This commit is useful in this particular use case, and should not be costly in other cases. A better fix would be to remember the QTextLayout associated to each row element. This is a bit more work, so this fix should be sufficient for now.
Additionally, do not paint misspelled marks when painting is disabled.
Fixes bug #9890.
Although af8ba5e0fixed#9321, it broke a valid use case that was
reported by a user at #9785. Hopefully we can come up with a better
fix for #9321.
This reverts commit af8ba5e069.
exist. This will allow for a proper fix for bug #8796, though that may or may
not get fixed before 2.2.0.
Also, change the InStyle tag to ModifyStyle, per a suggestion of Jurgen's.
(http://mid.gmane.org/565E17DD.7090008@clear.net.nz)
Fix the pilcrow and the cross in the outliner for Windows and old Ubuntus.
The thin space after the cross is based on aesthetics (in Ubuntu at least) after
trying both with and without a normal space. A thin space is already used for
display in BiblioInfo.cpp, so I presume it is safe.
Ideally, I prefer ❌ (CROSS MARK), whose description fits the purpose, over ✖
(HEAVY MULTIPLICATION X), which looks too bold in the UI. Whereas ✕
(MULTIPLICATION X, successfully tested in Windows by Andrew) looks too dim. But
❌ (CROSS MARK) is next to ❎ (NEGATIVE SQUARED CROSS MARK) so it might be as
problematic as the latter.
Do not output the cross on the author name in the toc of tracked changes.
Previews are now generated when previews are turned on in
preferences. This change ensures that when users activate previews
for the first time, they are not confused by no previews showing up
(a restart of LyX or a triggering of each individual preview would
be required).
There was a previously attempted fix for #9507 at 390ae054 which was
reverted at 358745d0 for performance reasons: it updated previews
after every preference change and updating previews is costly (even
if the cache signals there are no changes needed).
This implementation is consistent with what we do for updating the
system fonts in preferences.
boost::regex supports escape sequences starting with a backslash in format
strings of regex_replace, but std::regex does not. Therefore format strings
involving literal backslashes have to be written differently for both flavours.
The special MSVC handling in regex.h is removed, since it is not needed
anymore, and using grep syntax would definitely be wrong.
The computation of the legth of expanded hfills did not take into account their unexpanded size. This is done now by increasing the dimension (+=) instead of merely setting it.
Moreover, since the insets sizes are integer number, rounding effects have to be taken in account. To this end, the extra number of pixels is added to the last hfill in the row.
This fixes part of bug #9860.
Note not everything is fixed by this patch: the logic of ParagraphMetrics::hfillExpansion seems bogus to me. I do not see why consecutive hfills at the beginning of a row should not be all expanded. Since I do not know what are the peculiarities of hfill handling in LaTeX, I did not change it (yet).
I did not either try to investigate the label hfill part, because I do not even know what is so special about it. I think there is a lot of old logic that nobody ever tried to question.
This is done by implementing contentAlignment() for this inset.
In order to display properly 'stretch' alignment, the code for TextMetrics::getAlign is rewritten to include some code that was in computeRowMetrics.
Back references in the format string of regex_replace use the syntax $n both
in std::regex and in boost::regex for the default format. Boost seems to
support the syntax \n in addition, but it is not documented at
http://www.boost.org/doc/libs/master/libs/regex/doc/html/boost_regex/format.html.
Therefore it is a good idea to use $n also for boost.
The changed code is not used, but I tried to use a similar approach for
boost::regex, and found some problems:
- regex_replace and regex_search are implemented in the replacement, so they
must not be used directly
- an smatch object must be given by reference (as in the called methods),
otherwise an exception would be thrown at runtime
- the commented out regex_replace version is actually needed
This code is supposed to be deleted, but nevertheless I wanted to record here
how it had to be modified if it was actually needed.
It was possible for errors that occured in the first run to be shown
in the error list after the second run. Now, the errors are cleared
before the second run.
Although I do not have a reproducible example at hand, I imagine
this situation would occur if a rerun is required and there is still
an error after the rerun.
Related to #9765.
Before, the exit code for the first LaTeX run was used to set the
flag, which caused an error to be reported when in fact there was no
error on the second run.
This fix ammends 1dbf0e5a.
When importing TeX code like
%comment
TEXT
the LyX document currently becomes
[ERT %comment] TEXT
so that TEXT is now part of the comment.
Now output_comment adds a trailing newline if the token after the
comment is not a newline. Note that the newline that marks the end of
the comment has already been parsed at this point.
tex2lyx tests have been checked manually and updated.
Fixes ticket #9551.
A plausible scenario is that change tracking is used together with a versioning
system. In this case, parallel modifications might remove an \author line on one
side, and add another change of this author on the other side. This scenario
causes a bad merge after which the added change has no associated author. In
this case, LyX used to display a list of errors on opening and deliberately
removed the corresponding change tracking information.
* If ever a tracked change refers to an author that does not exist, then add a
dummy author. This dummy author is not saved to the file afterwards.
* Have a very clear error message on opening such a corrupt file.
This is better because it implements a LRU cache. Indeed, while editing in particular, width of many different strings has to be computed. This is different from the previous situation where only width of single characters was computed and cached.
This popped up in cmake monolithic build once. It looks like BufferView is
included indirectly by some of the other headers (otherwise we would have seen
compile errors for other build configurations as well), bu I'll keep the
forward declaration since we don't want to depend on this indirect header
inclusion.
N_() is a preprocessor macro to mark translatable static strings. It is not a
good idea to also name a class member variable N_: It did only work in the
other build configurations because gettext.h was not included.
