The trick is to remember in BufferView what has been done at the
previous draw, so that the row that contained the caret can be
repainted if needed.
To this end, add an argument paint_caret to BufferView, although
painting the caret is not the job of the BufferView (at this point).
BufferView::needRepaint will act as an interface with
TextMetrics::drawParagraph to know whether the painting of a given
row should be forced.
Currently everything is done at the top row level, so that, if the
caret is in a large table, the whole table will have to be repainted.
It is not clear yet that this is necessary.
Historically, because of two-stage drawing, LyX has been painting on a
Pixmap, and this pixmap is copied to screen at paint event time.
Now that we have three-stage drawing, it is possible to delay the
painting to actual paint event and avoid the intermediate Pixmap.
Known bug: the cursor is never erased.
Normally the two stages of drawing are
1/ compute metrics of insets/rows/paragraphs/mathrow...
2/ draw the elements and cache their positions
Now the three stages are
1/ metrics
2/ nodraw: do not draw the elements, but cache their position
3/ draw the elements (and store again their position; it does not
seems to hurt performance).
Revive the NullPainter: this replaces the setDrawingEnabled mechanism
with a painter that does nothing. The advantage is that updatePosCache
(renamed from setPosCache) does not need anymore to be invoked from
the frontend.
updatePosCache (the nodraw stage) is called at the end of
BufferView::updateMetrics.
The work is done now in Paragraph::anonymize().
Move the handling of the lfun to Buffer class.
Document the new feature in release notes.
(cherry picked from commit 1dba36c7ce)
This is a follow-up to 758de957.
- unify the metrics and drawing of \sqrt and \root using helper
functions mathed_root_metrics and mathed_draw_root.
- compute the vertical spacing above the nucleus of the root following
rule 11 of the TeXbook. In particular, it is different in inline and
display style.
- draw the root glyph without hard-coded pixel values. Make the line
width depend on the zoom.
more work is needed to implement properly rule 11:
- Ideally, we should use sqrt glyphs from the math fonts. Note that
then we would get rule thickness from there.
- The positioning of the root MathData is arbitrary. It should
follow the definition of \root...\of... in The Texbook in
Apprendix B page 360.
Fixes bug #10814.
(cherry picked from commit 16af6e7c50)
(cherry picked from commit 6cb6f78ae9)
Now the helper class contains logic that checks whether buffer are
known before closing them. This avoids potential crashes.
Use it in different places to siplify code. It is not clear at this
point whether it should be used everywhere.
Followup to bug #10847.
(cherry picked from commit cd9e42dc35)
It may happen that the buffers are visited in order buffer1,
buffer2, buffer1. In this case, we want to have only one undo group
in buffer1. The solution is to replace buffer_ with a set<Buffer*>.
A use case among others is InsetLabel::updateReferences.
(cherry picked from commit cc7364dfc5)
The correct behavior is to go to position 0 going up from first row,
and to end of row when going down on last row.
The targetx value of the cursor is not updated, which makes cursor
movement more natural.
Fixes bug #10701.
(cherry picked from commit 34285cc683)
The issue here was that the element was only removed from the queue
after the func request was processed, but within that process, other
function could access the queue, so the queue could even be empty
when this function finally wanted to remove the item.
Fixes: #10406.
(cherry picked from commit dadec50a18)
When pasting "\big" without any following delimiter, avoid
processing the same token again and again. For unknown reasons,
the delim docstring turns out to always be not empty: even when
it simply contains a '0' (no delimiter follows), its length is 1.
Fixes bug #11027.
(cherry picked from commit 8e8b3f6104)
Several problems:
* The regex failed at names such as 1_text_2_text.tex
(returned "2_text.tex)
* The regex failed at names such as 12_text.tex
(returned "2_text.tex)
* Masters with digits in the name (2018_text.tex) were
tracked as their own children
(cherry picked from commit 398e026250)
At some time it seemed like a good idea in breakRow() to return early
when the row was bound to be empty. It turns out that this creates two
symptoms:
* empty paragraphs will not have an end of paragraph marker
* since row width is not correctly computed in this case, caret ghosts
can appear in master.
This commit removes the oprimization and replace the do {} while()
construct to a straightforward while() {}.
Related to bug #10952.
(cherry picked from commit 76f0a3dd4e)
This is currently only relevant fo InsetListings, which falls back to
a fixed-width encoding under specific conditions. It is now possible
to query the inset about that and report the correct encoding in
DocIterator::getEncoding.
Addresses the second part of #10995
(cherry picked from commit f924ef2966)
On platforms where char_type is typedef'd to an integral type
rather than to wchar_t, when using the insertion operator <<
a single char_type is output as the number corresponding to the
code point of the character rather than as the character itself.
In this case, one has to use put().
(cherry picked from commit 144f06a00c)
This gets rid of the hardcoded latin1 encoding for verbatim. Instead,
verbatim now inherits the encoding from the context, which is what is
actually wanted here.
Fixes: #9012, #9258
A brand new event compressor based on Kuba Ober's cleverly simple
solution: <https://stackoverflow.com/a/21006207>.
Fix#9362, #9461, #9933: Lyx suddenly gets keyboard keys wrong, and
deadlocks
Fix#9790: LyX should perform key event compression (for improving the
remote X connections one would also need to implement
Qt::WA_KeyCompression)
Fix#10516: slowness on repeated arrow keys with IBus and Qt5
Patch pulled from
https://github.com/gadmm/lyx-unstable/commit/bf5a1efb0db5bfc2b
Signed-off-by: Juergen Spitzmueller <spitz@lyx.org>
(cherry picked from commit 43e4b80734)
This works around a TextMetrics issue where Row::beg/end_margin_sel
are sometimes not reset correctly when there is no selection on the
row.
In master a fix for this problem has been done at 654cded1. Here we
prefer a much simpler work around that fixes the symptom.
Fixes bug #10972.
At some time it seemed like a good idea in breakRow() to return early
when the row was bound to be empty. It turns out that this creates two
symptoms:
* empty paragraphs will not have an end of paragraph marker
* since row width is not correctly computed in this case, caret ghosts
can appear in master.
This commit removes the oprimization and replace the do {} while()
construct to a straightforward while() {}.
Related to bug #10952.
(cherry picked from commit 76f0a3dd4e)
This gives a more consistent indication of what belongs to an environment
(and semantically, such paragraphs are synonymous to nested standard
paragraphs)
Addresses part of #9261.
This is important for info inset, since if updateBuffer needs to be
run in redoParagraph (for the macro code), crashes can happen.
Fixes bug #10944.
(cherry picked from commit 806f40dbd4)
Possibility to add an environment before the current one and to append
and environment from outside the nesting scope.
This commit includes all fixes that went in during testing these
functions in master. It also moves the menu items from Edit to Insert.
Now layouts can specify other layouts that should be nested in and
after the current one (if the layout is switched from the current one
and if it follows a paragraph in the current one).
This is particularly useful for things such as the beamer frames, where
particular layouts are practically always nested.
This is a backport from master, including all fixes.
These classes come with their own working implementation of table
footnotes, so we are not supposed to use the tablefootnote or
footnote package.
Also add missing outliner name.
(cherry picked from commit dfaa4e9466)
By default, inactive math corners are invisible. In practice they are
annoying because they are visible when selecting text, and they can
also overwrite some parts of the equation.
The code in Inset::drawMarkers2, which is only used for maths, is
moved to InsetMathHull. Moreover, the inactive corners are not drawn
when they have the same color as the math background. A better way to
achieve this would be to set the color to transparent, but we do not
support this yet.
(cherry picked from commit 68614e9783)
This spacing was wrongly removed at 361bd53b as part of the
introduction of proper spacing between elements, but it only introduces
some breathing space around the delimiters. This will not be necessary
anymore when/if we use proper delimiters from the cmex10 font.
(cherry picked from commit 4cb5cc0c7d)
When a buffer is in an embedded work area (adv. find&replace), it is
not found by BufferList:::exists(), and therefore the undo group
created in GuiApplication::dispatch and in the handling of
LFUN_COMMAND_SEQUENCE will not be closed.. Crashes can ensue, as
described in Ubuntu bug:
https://bugs.launchpad.net/bugs/1737429
The solution is to introduce BufferList::isInternal and act on it.
Fixes bug #10847.
(cherry picked from commit 8b107f0490)
This had the effect that for file dialogs supposed to use two buttons,
only the second one was displayed, while file dialogs supposed to use
one button did not have a button at all.
Candidate for 2.3.x and 2.2.x.
(cherry picked from commit 74607702a5)
This fixes a crash when changing instant preview prefs while
document with previewed external inset is opened.
Fixes: #10785
(cherry picked from commit 0842e22f45)
When using CJK, don't try to close a language that was never
opened before, such as when it is the main language.
(cherry picked from commit 7e51b5f301)
- If a display math not starting a new paragraph is deleted, the
current \lyxdeleted macro (if any) must be closed and a new one
started, otherwise the display math will be shifted up.
- Use \linewidth instead of \columnwidth because the former will adapt
to the reduced horizontal width in list environments, avoiding shifting
to the right the diplay math.
(cherry picked from commit 7f23ca912c)
After 6642152e, user macros were no longer wrapped in \ensuremath. In 2.2 and
before, InsetMathMacro behaved as follow:
* Textmode global symbols are wrapped in \text when in math.
* Other global symbols, and user macros, are wrapped in \ensuremath when in
text.
* Undefined macros (ERT) are wrapped neither in \text nor in \ensuremath.
This is also consistent with the documentation of MathEnsurer in
mathed/MathStream.h.
This patch defines InsetMathMacro::currentMode() accordingly (respectively
TEXT_MODE, MATH_MODE and UNDECIDED_MODE) and uses it to determine the output.
After this patch, there is a mismatch between screen and pdf output for user
macros in \text. This is not a regression wrt 2.2 and is because linearization
does not satisfy currentMode() currently.
(cherry picked from commit 767f0df18fcd61611de1d1e10e0fd1867479fb59)
Instantiating a single QSettings and using it for each ui element
can significantly shorten the time required to save the various
states at exit. The speed up can be better appreciated on *nix,
where the settings are saved on disk, rather than on Windows where
they are held in memory (in the registry).
(cherry picked from commit 3b43fbfbb1)
Scanning is rather slow, so this improves performance in specific
situations (multiple inclusion of larger files in master/child or
chapterbib context)
(cherry picked from commit 88a0666d6c)
The current spelling is not strictly wrong, but flagged as unusual or
historical by some authorities. It is also found fault with many
spell checkers. Thus we decided to move to the more standard "-ible"
form once and for all.
See #10678 for discussion
This part covers the most tricky part: the internal naming.
Translations and layouts will follow.
This will all also all be backported to 2.3.x, for the sake of backwards
compatibility (cherry-picking).
(cherry picked from commit c466baaa5b)
The current spelling is not strictly wrong, but flagged as unusual or
historical by some authorities. It is also found fault with many
spell checkers. Thus we decided to move to the more standard "-ible"
form once and for all.
See #10678 for discussion
This part only covers the usage in comments and the like. More to follow.
This will all also all be backported to 2.3.x, for the sake of backwards
compatibility (cherry-picking).
(cherry picked from commit 648ddd25ec)
At least with gcc 6.4, if the first parameter passed to
regex_match() is afterward changed, the second one gets
corrupted. This is avoided by using a temporary string.
(cherry picked from commit c16ccdb5fd)
The previous redirection of the senseless option "bb" to "viewport" in
PDFLaTeX output has been removed in a recent graphics package update.
This breaks documents, since clipped graphics silently stop displaying.
This change restores the previous output by using "viewport" instaed of
"bb" for non-PS/DVI output, while leaving PS/DVI untouched (where "bb"
and "viewport" behave differently.
Fixes: #7910
Fix several unreleated cases where the `selecting' code path did not
reset cursor font correctly. This leads to a caret that does not have
the correct size, and can cause caret droppings with the new display
scheme.
(cherry picked from commit 88d0390724)
In some insets such as Arguments, a local language switch has to be
used. However, if the language inside the inset was set to be equal
to the outer language, the code decided not to switch language. But
then got confused and tried to close a switch that was never opened.
This patch forces the switch even if the outer language is the same.
(cherry picked from commit ce4f39d414)
If the height of the first row of the document has become smaller (for
example when it contains an image which size has shrunk), that the
anchor offset has to be adapted so that there is not a large blank
space at the top of the document.
(cherry picked from commit d6aecbda0f)
In some cases, it is possible that the BufferPositionMap has
dangling pointers. We thus check whether the Buffer is loaded
before accessing it.
Fixes: #10766
This fixes the display of closed ERTs, Indexes etc. when they contain
special chars, logos or quotation marks.
(Since quotation marks in ERTs are now insets, not chars anymore,
this also fixes a bug/regression of the display of babel shortcuts
such as "= in closed ERTs; hence I consider this fix necessary for 2.3.x)
Remove the trimming operation on LabelString, LabelStringAppendix,
EndLabelString and LabelCounter. This trimming meant that quotes
strings were not preserved, which is wrong.
To preserve layouts, the Layout format has been updated to 64, so that
layout2layout can remove extra spaces on existing strings, which
ensures that behavior is unchanged for old layouts (courtesy of rgheck).
It is now possible to re-add spaces in label strings where it makes
sense.
Fixes bug #10723.
(cherry picked from commit 5c54557350)
This fixes 3 bugs:
1/ only spaces are considered as part of the prefix
2/ leading tabs are removed unconditionally
3/ off-by-one error in the removal
The new intended behavior is:
1/ find the prefix (sequence of spaces and tabs) before the first
line; remove this prefix from the line
2/ on the next lines, check whether they start with the same prefix,
and if they do, strip this prefix
(cherry picked from commit 48f099d93a)
It was not a good idea to rely on QTextLine::naturalTextWidth() to
compute a string width. The correct method is horizontalAdvance().
Also round the value to the nearest pixel, since this is what
QFontMetrics::width() does.
Fixes bug #10700 (and maybe others).
(cherry picked from commit c874641e95)
Dispatching LFUN_BUFFER_ZOOM inside of GuiView::restoreLayout() was
blocked in some cases because the function can be called without a
buffer (and the LFUN is marked as needing a buffer). Instead of
conditioning on a buffer, the call is removed because in testing it
does not appear why it is needed.
This commit removes the status message that is displayed if starting
LyX without opening a buffer:
"Command not allowed without any document open"
See discussion at:
https://www.mail-archive.com/search?l=mid&q=20170718084344.3kjmu7hzoyajt7vd%40steph
This commit amends 4183a9f4.
Due to its peculiarity of not being saved in the document, the
shell escape setting was applied immediately without the need
for hitting the Apply or OK buttons. However, for uniformity
sake, it is better to adhere to the established paragdim of
confirming any changes before applying them.
Allow a LaTeX backend to run external commands after user confirmation.
This is a per document and per machine setting. The authorization has
to be given through the document settings pane, but is not recorded in
the document itself. Moving the document to either another computer or
another directory on the same computer revokes the authorization.
This can also be done by right clicking the red icon that appears in
the status bar when a document is marked as one requiring shell escape.
The patch also checks whether the user has added the -shell-escape
option to a LaTeX converter and nags the user to remove the option
(which would be used for all documents) in favor of the (per document)
support offered by LyX.
- Do not warn when the document properties pane is opened but only
when minted is selected and the pygmentize command was not found.
- Warn before launching latex if minted is selected and the document
actually uses listings insets.
Replace four cases of 'default: ;' in VCBackend.cpp with
default:
break;
Justification: Make consistent with the rest of the LyX source code.
I found no other occurences of 'default: ;' in the source.
Fix some editorial whitespace errors in AspellChecker.cpp.
Changes are non-controversial and I've reviewed them manually.
The whitespace errors were distracting from the big picture while
using the file to work on candidate(s) for a clang-format
configuration.
QSignalBlocker in updateScrollbar is too strong and prevents the scroll bar from
communicating with its scroll area. The only solution to block signals between
specifically between two objects is to disconnect. This makes sense in this
case, by making updateScrollbar responsible for managing the connection in the
first place.
Traditionally LyX behaves differently when the directive DEVEL_VERSION
is defined at compile time. This covers
* more detailed description of current position in status bar
* the help files are open in read/write mode
* more detailed debug output in the View Source panel
This patch introduces the new function devel-mode-toggle that allows
to use devel mode in stable releases, and vice versa.
The information is saved in the session file. The default is to
disable devel mode.
Remove all traces of DEVEL_VERSION in autoconf and cmake
Since TeXLive 2016, "fontspec" maps the ligature break command
\textcompwordmark to the ZWNJ character (U+200C).
This character is missing in many fonts (including the default: Latin
Modern) which leads to "Missing character" warnings in the XeTeX/LuaTeX
log file if a document using non-TeX fonts contains a ligature break.
LyX reports missing characters as error since fixing #9610.
In case of "invisible" characters, there is no data loss, in case of the
ZWNJ the functionality is kept: ligatures are prevented also if the ZWNJ
is missing in a font.
Therefore, a missing ZWNJ is now treated similar to missing characters
in "nullfont" (see [63f41711/lyxgit], bug #10394) and does not trigger
an error.
Fixes: #10727
This commit does a bulk fix of incorrect annotations (comments) at the
end of namespaces.
The commit was generated by initially running clang-format, and then
from the diff of the result extracting the hunks corresponding to
fixes of namespace comments. The changes being applied and all the
results have been manually reviewed. The source code successfully
builds on macOS.
Further details on the steps below, in case they're of interest to
someone else in the future.
1. Checkout a fresh and up to date version of src/
git pull && git checkout -- src && git status src
2. Ensure there's a suitable .clang-format in place, i.e. with options
to fix the comment at the end of namespaces, including:
FixNamespaceComments: true
SpacesBeforeTrailingComments: 1
and that clang-format is >= 5.0.0, by doing e.g.:
clang-format -dump-config | grep Comments:
clang-format --version
3. Apply clang-format to the source:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
4. Create and filter out hunks related to fixing the namespace
git diff -U0 src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace.patch
5. Filter out hunks corresponding to simple fixes into to a separate patch:
pcregrep -M -e '^diff[^\n]+\nindex[^\n]+\n--- [^\n]+\n\+\+\+ [^\n]+\n' \
-e '^@@ -[0-9]+ \+[0-9]+ @@[^\n]*\n-\}[^\n]*\n\+\}[^\n]*\n' \
fix_namespace.patch > fix_namespace_simple.patch
6. Manually review the simple patch and then apply it, after first
restoring the source.
git checkout -- src
patch -p1 < fix_namespace_simple.path
7. Manually review the (simple) changes and then stage the changes
git diff src
git add src
8. Again apply clang-format and filter out hunks related to any
remaining fixes to the namespace, this time filter with more
context. There will be fewer hunks as all the simple cases have
already been handled:
clang-format -i $(find src -name "*.cpp" -or -name "*.h")
git diff src > tmp.patch
grepdiff '^} // namespace' --output-matching=hunk tmp.patch > fix_namespace2.patch
9. Manually review/edit the resulting patch file to remove hunks for files
which need to be dealt with manually, noting the file names and
line numbers. Then restore files to as before applying clang-format
and apply the patch:
git checkout src
patch -p1 < fix_namespace2.patch
10. Manually fix the files noted in the previous step. Stage files,
review changes and commit.
This is a fixup to fc7fb6a564. The fix in there seems perfectly
correct (up to now), but for some reason, I could not refrain from
making InsetInfo not active. "What could possibly go wrong?", I heard
myself think.
Now I know: this causes an assertion error in InsetText::updateBuffer
because DocIterator::forwardPos does not enter the inset anymore.
This is a fixup to the series of commits 522516d9, d0acc3e5, 13c3c148.
Actually the right thing to consider in all situations is isActive(),
which really means `can a cursor be in there?'.
Improve the description of isActive() and editable() in Inset.h.
Set isActive() to false for InsetInfo, since no cursor should ever go there.
Again part of #10667.
Fix the whitespace in e.g. 'QString&' to 'QString &' as this
incorrect, but primarily to simplify a comparison related to
later possibly introducing the use of .clang-format.
When trying to read a textclass, read(Lexer, Readtype) parses and
executes the first token and only then verifies that its effect was to
set format properly. Otherwise it exits.
This is wrong, because if the first tag is "AddToPreamble", then it will
have modified the preamble by the time we notice it was not "Format" and
therefore exit.
The new code starts by requiring a correct "Format" tag.
Fixes bug #10725.
Move the code that forbids character insertion in its own helper function.
Call this function before doing a recordUndo. This avoids to mark the
document dirty in cases where nothing happens.
Part of bug #10721.
Using a regular expression to find /src/ or \src\ in a string is overkill,
and since regexes can throw exceptions, it makes coverity nervous.
The new code is simpler anyway.
We have a mix in this file of boolean stored as such or as strings.
This translates to values written as true/false or 1/0 in .lyx files.
In this case, the value of use_minted could only be true, since the
char * pointer is non null.
Also add some else clauses.
Spotted by coverity.
This is a consequence of e91572a0, although it is not clear why. The
contextMenuEvent code of the workarea should not delegate context
menu when it cannot honor it.
Also fix a small memory leak.
Fixes bug #10616.
The code in InsetLabel::updateReferences code changes reference insets
in potentially several buffers. When recording undo, it is important
to use the right undo stack, otherwise crashes can ensue.
Once it is done, it is neccessary to create undo groups as needed.
This is done using UndoGroupHelper. This demonstrates a shortcoming of
UndoGroup helper: if a buffer is encountered in two seperate
occasions, two undo groups will be created for this buffer. This is
not correct.
Fixes bug #10643.
While 522516d9 was too strong and broke mathed, d0acc3e570 is too
lenient and can accept insets (mathed/CommandInset, InsetInfo) that
have a positive nargs() but are not editable (because they encapsulate
something).
Therefore the best solution for now is to use editable() in text and
isActive() in mathed, until those two things are merged.
Part of #10667.
(required because filesystems return listings in undeterministic order)
to generate Resources.qrc and thereby Resources.cpp and the lyx binary
in a reproducible way
Setting LC_ALL=C because sort order might vary with locales.
See https://reproducible-builds.org/ for why this matters.
Fixes#10711.
Pygments versions prior to 2.0 only accept lower case names for lexers.
This commit makes sure to always use lower case names for the language
that is written in the LaTeX file, while retaining the proper casing
for the presentation in the GUI, which is dictated by compatibility
with the listings package. Moreover, if one switches from listings
to minted in a document, the language combo is properly updated even
if the used language had attached a dialect (a concept not shared by
minted), or even when importing a LaTeX document with tex2lyx.
In some (not yet understood) situations, the paragraph metrics cache
is empty in generateSyntheticMouseEvent(). We just avoid a crash in
this case, but there is probably an underlying problem that deserves
being fixed.
Fixes bug #10324.
Both listings and minted allow for many complex options. So, a latex
source can be easily written as
\documentclass{article}
\usepackage{minted}
\usepackage{graphicx}
\usepackage{dingbat}
\begin{document}
\begin{minted}[breaklines=true,
breakautoindent=false,
breaksymbolleft=\raisebox{0.8ex}{
\small\reflectbox{\carriagereturn}},
breaksymbolindentleft=0pt,
breaksymbolsepleft=0pt,
breaksymbolright=\small\carriagereturn,
breaksymbolindentright=0pt,
breaksymbolsepright=0pt]{Python}
def f(x):
return 'Some text' + str(x) + 'some more text' + str(x) + 'even more text that goes on for a while'
\end{minted}
\end{document}
The used text editor can therefore add a mixture of tabs and spaces.
The white space after the options is not a problem and the imported
file compiles just fine, but the validator gets confused and doesn't
validate them. This would entail a difficult editing of the options
only to have them validated. So, better remove the white space.
This commit updates tex2lyx in order to also import minted listings.
For the floating version of a listing, minted uses the listing
environment, a concept that is not shared with the listings package,
towards which our listings inset is geared.
For this reason, a kludge is necessary when importing minted listings
not previously exported by LyX itself.
If the floating listing contains only a caption and a label (other
than the listing itself), everything is fine and the import is (or
aims to be) perfect. But, as in all other floating ebvironments,
one can also stick there other elements, which don't have a place
in the listings inset. So, in order to avoid a data loss, tex2lyx
sticks everything into the caption. In this way, things may be
rearranged in the GUI, if necessary. There is no other way, apart
from a complete redesign of the listings inset, of course. However,
I think that this is an acceptable compromise.
This removes the use of rectText in RenderButton. The fact that this
gave different spacing than buttonText was a problem.
Now buttonText requires to specify
* the offset, so that INSET_TO_TEXT_OFFSET is not used anymore in
src/frontends/, which will be useful later.
* the background and frame color, in replacement for the hover state.
Remove the methods button() and buttonFrame() from GuiPainter.
Remove some unused header files.
Fixes bug #10704.
If
1. the inset is deleted before pasting its contents in the outer text, and
2. the inset contents begins with an inset, and
3. the clone of this inner inset is allocated at the memory location just
made free,
then bad things can happen.
To avoid this, we delete the inset only after its contents has been pasted.
Fixes bug #10667.
This is the same issue that was addressed in the all_sel case at
695b0cc3. The rounding issue only happens at specific zoom and
jusification values.
Fixes part of #8883.
The test added at 359aef92 was incorrect. Actually, Inset::editXY
returns the inset when it is edited and also when it is not, which
can be confusing. So if we are unlucky and the slices positions in the
text area and in the inner inset match, the code below triggers and
many bad things can happen.
Also improve the documentation of Inset::editXY and TextMetrics::editXY.
Fixes#10691.
In the document settings allow to immediately switch from one
package to the other for parameters validation without the need
of first applying the changes.
Several comments in the code point to the fact that hidden buffers are assumed
to be clean.
The other solution was to adapt the closing & saving code to take into account
hidden dirty buffers. Experience shows that it is more useful to unhide the
buffers at the moment of the external modification, in the context of a git
workflow where one has to reload the modified children buffers one-by-one.
Fixes crash at #10603
When the Buffer is notified to be externally modified, check that the
file contents have changed using the checksum.
Document the shortcoming of FileMonitorBlocker.
Fixes#10642.
Starting at 61b2bd5e, boost::bind was progressively replaced with
std::bind. They are not interchangeable though. boost::bind implements
the tracking of boost::signals{,2}::trackable objects. Now that
std::bind has completely replaced boost::bind, tracking never occurred.
This commit replaces boost::signals2::trackable with the new preferred
boost::signals2 methods: scoped_connections or slot::track_foreign. The
support::Trackable class introduced is less safe but easier for transitioning
old code.
Fixes the crash at #8261.
- Remove "chapter" and "section" as this are to be passed as class
options and are otherwise not recognized.
- Let onoff=false for all TRUEFALSE parameters, otherwise only the
form option=true is accepted and option=false does not validate,
generating a lot of confusion.
Minted provides for captions only with floating listings. However,
listings always allows captions, and our machinery is geared accordingly.
So, instead of discriminating the floating and non-floating cases,
always allow for captions with minted, too. When minted does not provide
for a caption, we will provide one.
In the child document case the caption will always be before the listing,
while for the inset case the caption will be before the listing if it
is entered as the first line, after the listing otherwise.
We stored the combo position index, but this changes on engine switch.
This also fixes a crash due to out-of-bound index at engine switch.
Fixes: #10692
The test added at 359aef92 was incorrect. Actually, Inset::editXY
returns the inset when it is edited and also when it is not, which
can be confusing. So if we are unlucky and the slices positions in the
text area and in the inner inset match, the code below triggers and
many bad things can happen.
editXY() should probably have a documented way to indicate whether the
cursor has entered the inset, although the test used right now is
probably OK. The inset value is useful mainly for context menus or
tasks that need to know which inset the (x, y) coordinates
point to.
Note finally that the documentation of TextMetrics::editXY is
incorrect concerning the return value. It will return a non-null value
if the cursor is on a not editable inset.
Fixes#10691.
This is a follow-up to e194c9ce. There was actually no reason to let
InsetCollapsable and InsetText draw their own background. It is more
correct to remove the existing code and let the generic
Inset::drawBackground take command.
This allows to revert d207e85c.
Fixes bug #10587.
It was possible to insert a caption in a listing not marked as
floating. This didn't cause errors but the caption simply was
disappearing in the output.
When choosing a code language that has dialects in the languages
combo box, the dialects combo gets activated also when minted is
in use. However, minted does not support the concept of dialects
and the combo should not be enabled. This is harmless because the
dialects are simply ignored and the dialects status is restored
after apply, but it may fool the user in thinking that a dialect
can be actually selected. So, always disable it with minted.
This is a follow-up to e194c9ce. There was actually no reason to let
InsetCollapsable and InsetText draw their own background. It is more
correct to remove the existing code and let the generic
Inset::drawBackground take command.
This allows to revert d207e85c.
Fixes bug #10587.
Update the listings inset to optionally use the minted package
(instead of the listings one) for typesetting code listings.
Only one of the two packages can be used in a document, but it
is possible to switch packages without issues if the used options
are the same. If a switch is made and the options differ, one needs
to manually adjust them if they were entered in the advanced options
tab, or apply again the gui settings.
Note that minted requires the -shell-escape option for the latex
backend and the installation of additional software (python pygments).
When inserting a column in tabular, the border of the new column
should be copied from the border of the (previously) right-most
column.
Also remove a redundant line. The line
setRightLine(i, true);
was only reached if rightLine(i) was true.
Patch from Daniel Ramöller.
Make sure to properly nest \begin{lang} and \end{lang} tags even
when no language package is selected. In this case, LyX assumes
that babel is being used, so the language names might be wrong
if the user arranged for using polyglossia in the preamble.
Nevertheless, we assure that the produced output is syntactically
correct, so that by adding proper preamble code a correct output
is still possible.
When an inset wants to use the whole available width, it is necessary
to take into account that some of this width may already be taken by
the end-of-paragraph (pilcrow) marker.
Fixes bug #10537.
The RenderButton object now has a inherit_font_ property. It is set
depending on the value of Inset::inheritFont().
This is a better fix than 55533804, which caused bugs #10682 and #10677.
Fixes bug #10258
Do not take the optional arguments from the first paragraph, but from the
paragraphs whose layout have no arguments, consistently with the code in
InsetArgument::updateBuffer (i.e. what was shown on screen).
With these changes, equation numbers are shown properly on screen.
When setting is default, we guess the side using these two rules
* ams(art|book) and siamltex classes are leqno by default. This is
signalled because the classes provide "leqno" (in amsdefs.inc). If
there are other classes that do this in output, the relevant classes
should be updated.
* the language arabic_arabi also sets leqno by default. This is
currently hardcoded for lack of a better idea.
Besides, a few bugs are fixed:
* use mathrm instead of mathbf for numbers metrics
* set spacing between maths and labels in inches
This commit replaces the string math_number_before by a proper math_number enum.
Note that the _before naming was misleading. It was chosen at a time
when we were not sure whether leqno was always left or could be right
in RtL documents.
Note that the token in LyX document is still \math_number_before and
this should be changed.
Fixup for 19cc4a1f.
as discussed our support for the formula numbering side should be complete. There are document classes that uses left numbering as default and with the class option "reqno" this can be changed to right numbering. reqno requires the loading of amsamth.
Consider mathbin, mathrel and mathpunct as word separators. This makes
Ctrl+{Left,Right} more intuitive, quicker, and more different from {Left,Right}.
This takes into account all the feedback from the discussion on the general
list. Further feedback welcome.
Setting the default working directory to '.' is an invasive change
on Mac and Windows, where the current working directory of LyX when
LyX is started from the GUI is not a reasonable choice for the
default directory in e.g. the "save as" file dialog or the "open"
dialog. A similar situation could happen on Linux distributions (I'm
not aware of any, e.g., POSIX standard that defines that the working
directory of a binary started from GUI should be the home
directory). Thus, it is not clear this default is good on any
platform.
If the user wishes to have the behavior of '.', the description in
the "paths" preferences pane provides the information for making the
change.
For more information, see the discussion at:
https://www.mail-archive.com/search?l=mid&q=635298DE-5028-4BB1-8D8F-A634BA68C420%40gmx.net
This reverts commit 892593fbdc.
- Adds a currentZoom variable which holds the current zoom level.
- The zoom stored in preferences is used as default zoom level (default binding:
M+0).
- The currentZoom is saved and restored via QSettings.
- Adds LFUN buffer-zoom for (re)setting zoom.
This is done by two things:
1/ the equation returns LefAlign as display() value
2/ Inset::indent() return a value (in general 0) that should be added
on the left (or right in rtl) of the inset when it is flushed.
The code that uses these values is in TextMetrics::computeRowMetrics.
The current set of options to provide include names of
the find and replace internal buffers, something out of
reach for the user. Furthermore, options are provided
using a multi-line syntax, which cannot be entered
using the mini-buffer AFAIK.
Length::inPixels(MetricsBase const &) and VSpace::inPixels(BufferView
const &) should be moved respectuvely to MetricsBase and BufferView:
core file are not supposed to use GUI files.
This reverts commit d4ea07705a.
d4ea0770 lead to a compile error with gcc 4.6. The error is likely
due to that version's weak C++11 support.
This commit reverts d4ea0770 in order to preserve compilation with
gcc 4.6 for alpha1.
New special character to mark an optional line break
without inserting a hyphen (ZWSP). See #10585.
Corresponds to the Unicode character U+200B ZERO WIDTH SPACE
This isn't a “space”. It is an invisible character that can be used
to provide line break opportunities.
http://unicode.org/notes/tn27/
While the literal Unicode character can be used in the LyX
file, it is invisible in the GUI.
For visible feedback, the patch adds a new special character "allowbreak".
The small mark is inspired by LibereOffice.
A tooltip is added.
Use Length instead of HSpace for math_indentation and rename it to mathindent.
Get rid of the string version.
Rename (g|s)etMathIndentation() to (g|s)etMathIndent().
Remove the HSpace class altogether.
Some cleanups to parindent support to look like mathindent.
- remove quotes around length
- use "default" for default parindent, instead of an empty string
- Fix the constructor Length(string const &) so that an empty string
corresponds to an empty length (coherent with Length::asString()).
This reverts commit d568846e03.
Unfortunately the used alternative API LSCopyDefaultApplicationURLForContentType
is available with 10.10 and later only and cannot be used therefore. So there
is no alternative to deprecated calls ATM. LyX 2.3 should run on 10.7 at least.
When applying or saving Document Settings, LyX no longer opens or
closes branch insets. The intent of the previous code was to open
branch insets of a branch that is activated, and close branch insets
of a branch that is deactivated.
After some discussion [1], it was decided that the behavior intended
by the previous code was inconsistent with activating/deactivating a
branch in the context-menu of a branch inset, and the previous code
assumed a workflow of the user, rather than letting the user
separate opening/closing branch insets from activating/deactivating
them.
This commit modifies fd6cd728.
[1] https://www.mail-archive.com/search?l=mid&q=20161030220813.3zlp3zgqgomhx35y%40steph
1.) The command check_layout exits with "0", even if the module contains errors.
The new module check_layout.cmake tries to compensate.
2.) Added default style to the test layouts when checking single modules.
Seemingly, when removing an argument from argv, and thus inserting
a null pointer to shorten the array, causes an assertion because
the null pointer is not a valid heap pointer (sic!)
Fixes bug #10440
When trying to do implement a LaTeX feature on screen, it is always
good to see how LaTeX does it, just in case it is easy to implement on
our side.
Then we have a correct output at all DPI sizes.
- LyX has new preamble tags. Although that they are not relevant for LaTeX they must be created by tex2lyx nevertheless
- also fix an issue that the formula indentation was always output
- update the tex2lyx tests accordingly
getPosNearX, which is the only user of x2pos, should always return the
nearest position.
In editXY, there is a need to return the position where the inset
stands, but it is done using checkInsetHit.
This is a simplification of commit eb4a2a19, which has been reverted
at 01f0ab64a.
Fixes part of bug #10569.
Instead of using complicated (and wrong) code, it is better to use
getPosNearX here.
Also simplify the code by removing temporary variables.
Fixes part of #10569.
The code that looks whether neighbor block has a different direction
should look to the left or to the right depending on the direction of
the current block.
Fixes part of bug #10569
This allows to fix distclean properly, since we know that
subdir-objects is used. When it is the case, it is not a good idea for
a Makefile to use a source file which is under the control of another
one. This could not be made to work work with old automake versions
(<1.14).
Therefore we refer directly to object files in Makefile.am instead of
source files. The actually leads to less compilation in tex2lyx.
Update the code here and there to remove compatibility hacks. Update
documentation.
Re-enable the layout test and fix the Length test, which was ovewriting
memory in test_inPixels() because lyxrc did not had a correct layout.
As it was, the comparison buffer was sharing a DocumentClass with
one of the compared buffers. I don't fully understand why this was
causing a problem, since we use a shared_ptr. But this patch creates
a new DocumentClass for the new buffer.
This is preliminary work to make roots look more like in TeX output:
* correct font size for root order
* set minimum size of the root from the max ascent descent of the
font. This is what TeX does.
* fix drawing, and in particular horizontal size.
More needs to be done, in particular:
* handle zooming and dpi correctly by removing hardcoded pixel values.
* factor the code for the two types of roots in one.
With RtL text, the method can be non-monotonic wrt x value (which is a
Qt bug). To work around this, we check whether positions adjacent to
those returned by xToCursor look better. Depending on whether the new
x position is too small or too large, we look backward or forward for
a better solution.
The performance is probably not great, but this is only needed for
user interactions, so the performance penalty should not be a problem.
Fixes#10569.
Coverity flags this code as not handling exception that may happen in buffer().
My own analysis is that this can never happen because isBufferValid()
does check whether buffer_ is null.
Any insght appreciated. The commit should be expeanded to more cases, actually.
The RenderButton object now has this property. It is set depending on
the value of inheritFont() method that is currently only set for
InsetRef, InsetBibtex and InsetCitation.
Fixes bug #10258
There a some exceptions related to the fact that BOOST_ASSERT throws
an unhandled exception, which is fait enough. This is handled by
uploading a modeling file to coverity.
The second batch of issues are related to the use of lexical_cast in
convert.cpp. We use now a wrapper around boost::lexical_cast that does
not throw but return empty strings instead. I am not sure actually of
when lexical_cast could fail.
The special mode used by macros where the macro name is displayed as
grey text in a box is now one of the possible marker types for any
inset. The new code puts the macro name below the text, which means
that only the text below the current line will be moved. This makes
edition much more comfortable. The grey border around the contents has
been removed too.
The marker_type enum has been moved from Inset to InsetMath. A
markerMargin() function returns the horizontal margin required on each
side for the marker. Only the corner-type markers MARKER and MARKER2
need some.
A new BOX_MARKER enum value has been added and is taken care of in
afterMetricsMarkers (renamed from metricsMarkerVertical) and
drawMarkers.
The InsetMath::marker() macro now takes a BufferView pointer as
argument, so that the marker type can depend on editing state.
MathRow::metrics now makes changes to the MathRow object when needed.
The specific metrics/draw code in MathMacro has been removed and
replaced by assertions. Code in addToMathRow and marker is adapted to
reflect the cases where linearization is possible.
Rephrase positively the check box for the output of en- and em-dashes
and disable it when using non-TeX fonts. The state of the check box
is remembered, so that toggling the non-TeX fonts check box does not
cause information loss.
This commit fixes the regression introduced in 2.2 about the
output of en- and em-dashes. In 2.2 en- and em-dashes are output as
the \textendash and \textemdash macros when using TeX fonts, causing
changed output in old documents and also bugs (for example, #10490).
Now documents produced with older versions work again as intended,
while documents produced with 2.2 can be made to produce the exact
same output by simply checking "Don't use ligatures for en-and
em-dashes" in Document->Settings->Fonts.
When exporting documents using TeX fonts to earlier versions, in order
to avoid changed output, a zero-width space character is inserted after
each en/em-dash if dash ligatures are allowed. These characters are
removed when reloading documents with 2.3, so that they don't accumulate.
Handle name prefix (aka "von" part) as a separate entity, just like
BibTeX and Biblatex do. This allows to omit or reposition it in
accordance to the current style ("Goethe, Johann Wolfgang" or
"von Goethe, Johann Wolfgang" or "Goethe, Johann Wolfgang von" are all
valid and used).
LyX's name parser should now be on par with BibTeX's.
This patch removes explicit calls to stat() in the DepTable code. The
original motivation was to get read of a stat() invokation where the
error condition was not checked (spotted by coverity).
It is not clear that the optimization is a gain, but it is clear that
it has a cost: some elements of formulas will not be present in the
position cache.
Fixes bug #10520.
Using this global variable in the class is clearly a bug. If we wanted
to avoid doing it by mistake, the variable should be moved to the LyX
singleton.
Also add an underscore to the private variable formatlist_.
When we have a name with more than two parts, but no "von",
it was coming out as, e.g.:
Obama, Barack Hussain Obama
i.e., with the last name appearing twice.
Also adds a check for names without spaces, which would have given:
Pele, Pele
This was not the original issue at #10582, so that bug is still
open (though I cannot reproduce it).
The error is reported in the GUI, but for the terminal we must write
explicitly to STDERR.
For a specific example of this type of exception, see the previous
commit, 72c3dbd.
If an included file is not found, it seems impossible that the final
output would be correct. Before this commit, when exporting on the
command line, LyX would create the PDF and exit with a zero error
code so unless the user was monitoring the terminal output, they
would not know there is a problem.
This change is consistent with 1a374a93.
Introduce a distinction between being read-only and having the read-only flag. A
buffer is read-only if either it has been externally modified or if it has the
read-only flag.
Coverity complains that we might read strings that are arbitrary
large, and that this can be a security issue. This is a problem in
particular, when we feed these strings to from_utf8(), which coverity
flags as dangerous for some reason.
The best solution would be IMO to model from_utf8() properly, but I do
not know how to do that. Here I try a different solution, where I
cannot read a string larger than 64k from the file.
Let's see whether this removes part of coverity warnings.
Coverity does not find it obvious that p is never negative. Normally
it is the case (because the items have been filtered), but it is
better to play safe.
The added cmake-parameter is:
-DLYX_EXTERNAL_MYTHES=<value>
where <value> is one of
AUTO (Default) Search first on system for mythes (lib and include)
ON Use installed only (errors if not installed)
OFF Compile the provided source in 3rdparty
Instead of using a coverity annotation (that does not work) it is
better to really iinitialize the members of the object, just in case
somebody decides to actually use the DisplayPath() constructor.
Coverity correctly spotted that the existing code creates a temporary
map and returns a value from it. It is not possible to make the map
const& directly because operator[] may change the map.
Therefore, we use map::find instead.
When including files, LyX always searches the user and the system
directory, in that order. This means that when using local layout
files broken down into multiple includes, the various includes should
be specified with a path relative to the user layouts directory
(typically ~/.lyx/layouts), making this very impractical.
This commit allows including local files by specifying their path
as explicitly relative to the main layout file position, i.e., by
specifying their path with either "./" or "../". If the main layout
is not loaded from a local file, the usual search order is used,
even if the path are explicitly relative. So, for system layouts,
both "Input ./name.inc" and "Input name.inc" are equivalent.
It extended QToolBox with size calculation to fix UI issues with the previous
design of GuiCitation. Since it always needed some kind of hack and since
QToolBoxes do not appear so popular, it probably won't be used anymore.
Because latex allows to do so, and there is no easy way to achieve this.
This was apparently implemented to allow cycling between the various dash
types, but it was a bad idea bringing no benefit and causing griefs.
Previous fontspec loaded xunicode internally, for recent version, this
is no longer desired. However, we still need it for tipa emulation.
We use fontspec's trick to bypass XeTeX test with LuaTeX.
Now the selection is not done by the inset, but by the MathData
itself. This allows for some code simplification and avoids an
extra redraw.
Additionally, this fixes the selection inside macros, which was broken
by the new MathRow code.
Useful to cache copies of objects, including shared_ptrs. No risks of dangling
pointer, and avoid naked pointers in the source.
Fix memory leak when compiling with Qt5.
Now backspace and delete in text will select non-empty math and text insets
before deleting them. This is consistent with what happens in math already.
This is implemented for InsetText as well but can be disabled in case of
negative feedback.
This can be set for any sort of inset with the new virtual method
Inset::confirmDeletion.
New option "force" for the LFUN_*_DELETE_* commands, that bypasses the
confirmDeletion check.
The special mode used by macros where the macro name is displayed as
grey text in a box is now one of the possible marker types for any
inset. The new code puts the macro name below the text, which means
that only the text below the current line will be moved. This makes
edition much more comfortable.
The marker_type enum has been moved from Inset to InsetMath.
A new BOX_MARKER enum value has been added and is taken care of in
afterMetricsMarkers (renamed from metricsMarkerVertical) and
drawMarkers.
The InsetMath::marker() macro now takes a BufferView pointer as
argument, so that the marker type can depend on editing state.
MathRow::metrics now makes changes to the MathRow object when needed.
The specific metrics/draw code in MathMacro has been removed and
replaced by assertions. Code in addToMathRow and marker is adapted to
reflect the cases where linearization is possible.
From now on \kern and \mkern remain as ERT as long as the length is invalid.
Fixes#10539 (regression at 10c8d51b).
The only way to produce an InsetMathKern now is via parsing (i.e. file opening
or copy-paste). This is because there has never been any sensible way to input a
valid InsetMathKern, but this is another issue.
Since in InsetMathNest::cursorPos we do not know what is the value of
the row element before value of a given BOX, it does not make sense to
set the cursor at a given offset from the start of the MathData
object.
Therefore here we set the cursor in the middle of the MathData object,
which unfortunately may or may not be visually centered wrt the BOX.
The best solution would be to use the MathRow data here, but
unfortunately this is not completely trivial.
This patch replaces 7917ebcc4.
Horizontal space is now added for linearized macros too.
Vertical space handling is done in a separate method.
This is in preparation for handling of 'box' macro editing mode in
MathRow.
The current version was wrong for non-English dialogs, and even for
the English one, due to the translator commands that were not removed
for calculation (as in "Formats[[output]]").
Candidate for stable.
This adds support for the chapterbib package, but also adds ways to
produce this sort of multibib with biblatex and bibtopic (which are
both incompatible with chapterbib).
File format change.
InsetMathDelim does not need markers because the delimiters are
visually enough.
CommandInset (like InsetMathRef) does have cells, but they are hidden
(only for storage). Therefore the default InsetMath::markers() method
mistakenly added markers. In practice, the markers were never active
(since the cursor cannot go into the inset), but some space was
reserved for them.
This allows to somewhat simplify the text and avoid some uses of
Paragraph (in the long term, RowPainter should not have to access
these things).
At the same time do a small cleanup to RowPainter: rename
text_metrics_ to tm_, remove pm_ and width_.
The enum values BEG_MACRO/END_MACRO and BEG_AR/END_AR are replaced by a
single BEGIN/END pair.
The MathRow code now only knows about insets and math arrays.
New hooks (before|after)(Metrics|Draw) are run by the MathRow code
as needed. They are actually also used internally by the MathMacro
code.
The gain is that most traces of explicit macro handling (and
the MathRow::Element::macro member) have been removed from MathRw.cpp.
The next step will be to extend the tokenizing process to allow for
linearizing insets other than macros.
* Convert the kerning into a proper right margin for mathnormal, mathscr and
mathcal (fonts with \fontdimen2 == 0 as per rule 17 from TeXBook).
* Simulate the fact that characters in mathnormal fonts have a 0-width left
bearing.
* Implement subscript positioning in the case of rule 17 using negative italic
correction (kerning_).
File format change.
This allows for the relevant InsetCommand-based dialogs (such as
citation text before/after, Bibitem label, hyperlink name etc.)
to provide both the input of verbatim code or text that is transformed
to proper LaTeX code.
Some dialogs (Nomencl, Href) already had some methods (although they
could not be toggled), which are now centralized and streamlined.
The initial work of this patch has been done by Georg Baum (see
http://www.lyx.org/trac/attachment/ticket/2751/x.diff)
Fixes: #2751, #8227.
When using Qt stuff in breakAt, it may happen that the row is broken
after an hyphen (whereas the old code would only consider spaces).
The fact that we abuse the Row::right_boundary() property to detect when
a row should be flushed broke justification when a row is cut at an
hyphen.
Fix this by introducing a new Row::flushed() property and set it as needed.
The code that tries to decide whether it is worth splitting a given
text row element had a shortcoming: it did not take into account the
left margin of the new row that would be created.
The problem is that this left margin is not the same as the left
margin of the current row, because there can be for example
indentation effects.
To fix this problem, we pass the amount of available space on the
next row as a parameter of Row::shortenIfNeeded.
Note that there is no need to care about RtL row elements at this
point, since the bidi algorithm will be applied to the row
subsequently.
This avoids some duplicate code. Note that the return value of
Paragraph::getAlign had to be changed. I suspect it was set to char to
avoid reading one header file in Paragraph.h.
Whenever an argument delimiter is used inside the argument, the argument
needs to be grouped, that is
\cites({text (text) text})
or
\cite[{text [text] text}]
This fixes the original case reported in #2751 which is independent
from the general issue that the pre- and postnote field take literal
code.
Starting with Qt 5.6, setting the environment variable QT_SCALE_FACTOR
makes everything accordingly bigger. So, if QT_SCALE_FACTOR=1.2, all
text and GUI elements are rendered 20% bigger. However, if an application
does not account for this, everything will also look "blocky".
With this commit, all text and images will be scaled remaining sharp.
This works whether a HiDpi screen is used or not, but is mostly useful
with a HiDpi screen, as all GUI elements are more spaced apart and one
can use the mouse for selecting things without requiring a high precision.
These are biblatex-specific multicite commands that allow for multiple
pre- and postnotes, as in:
\cites(pre)(post)[pre1][post1]{key1}[pre2][post2]{key2}...
with an optional general pre- and postnote, which applies to the whole
list (like [][] in normal cite commands) and an optional pre- and
postnotes for each item, so that pagination can actually be specified in
multi-cite references, as in:
(cf. Miller 2015, 2; furthermore Smith 2013, 23-23; Jenkins 2012, 103,
also refer to chapter 6 in this book)
See the biblatex manual, sec. 3.8.3., for details.
File format change.
It seems that QTextLayout does not handle properly a single character
with 0 width. This breaks drawing of things like \not.
Actually the problem had been worked around already in lib/symbol. The
work around can therefore by removed now.
[additionally, remove extra spacing from \mapsto, \Mapsto]
Add a pixel gap around boxes.
When a box is invisible, its width should be null (but keep the weight
to avoid drawing problems (think empty sqrt in a macro).
Fixes missing outliner names in various situations. Now if the warning "Missing
outliner name" appears in the console, this correctly hints at an actual issue
with the layout.
Biblatex can be used with Japanese, but then, biber (not pbibtex) should
be used as processor.
I this context, bring the jbibtex UI in line with bibtex, allowing for
a selection of alternatives.
This is now set as default. It selects biber for Biblatex (with
fall-back to first bibtex8, then bibtex, if the former is not
installed), and bibtex for BibTeX-based engines.
With this, users do not normally need to care for the processor when
they switch cite engines.
