- fileformat change
- I could not update the tex2lyx test files because of bug #10440
- maybe the lyx2lyx routine could be improved but since a document can also begin with another layout than "Standard" I could not use the lyx2lyx function put_cmd_in_ert
It should be now possible underlining or striking out any kind
of math inset containing any math construct indigestible to ulem.
While this was already possible for inline math insets, they could
have break if an aligned environment was used, for example.
This is now possible also for diplay math. Even if this can be
nonsensical and not visually perfect, at least no latex errors
should be generated if one tries to.
This should avoid performance problems related to the window update machinery.
Moreover this fixes a crash introduced by 82808fea when closing a file.
Note that GuiWorkArea::Private already had a read_only_ member, but it
was unused.
Also rename LyXVC::vcname() to LyXVC::vcstatus() since it now contains
directly the UI string to be shown.
Font changes are brought inside the \lyxdeleted macro, just before
outputting the latex code for the math inset. The inset writes a
signature before itself and this is checked by \lyxsout for recognizing
a display math. So, the font changes confuse \lyxsout, which also
swallows the first macro at the very start of \lyxdeleted. The result
is that the font changing command is not seen by latex and \sout is also
used to further strike out the formula already striked out by tikz.
This commit makes sure that the expected signature actually appears
just after the opening brace of \lyxdeleted. It also accounts for a
paragraph break occurring just before the math inset, in order to not
introduce too much vertical space, which is noticeable when using
larger font sizes.
LaTeX refuses to break a line when it is empty. But we have to start
a new line here, otherwise the whole displayed equation would be
typeset as it were inline with previous content. The solution is to
put a zero-length space just before the line break. Moreover, this
is the right thing to do, as it simulates the extra space that is
normally added in this circumstance.
Showing deleted display math by enabling "Show Changes in Output" was
only possible with dvi (through dvipost). Although LyX strikes out
such formulas on screen, it was impossible obtaining an output
directly using pdflatex (or other engines producing pdf) because
ulem cannot cope with display math material and gives errors.
The solution is to strike out by ourselves such deleted formulas.
I took into account several options. One of them would produce
an output similar to dvipost (which strikes out each element), but
would have required much more changes in the output routines.
Eventually, I opted for using tikz, which gives a more clean
output (as it requires to simply adding a preamble and a postamble
to the latex code of any displayed math, instead of a mark up
tailored to each particular math construct). The look of the pdf
output is similar to the way LyX strikes out the equations on screen.
Now that there is a signal to inform the controller when the buffer view has
changed, it is no longer necessary to store a perishable pointer to a buffer
view in the dialog view. (Indeed, it was only really useful for checking whether
the new buffer view pointer was different from the old one.)
TODO: other dialogs should be audited for similar hazards.
This enables error reporting for the preamble, provided the preamble is written
using the new InPreamble layouts.
In the future, I find it preferable to deprecate the usual preamble in favour of
InPreamble layouts rather than implementing error reporting for the usual
preamble. This requires some improvements to code editing in the buffer view
first (line breaking behaviour, syntax highlighting).
texstring is a pair of a docstring and a corresponding TexRow. The row count in
the TexRow has to match the number of lines in the docstring.
otexstringstream is an output string stream that can be used to create
texstrings (i.e. it's an odocstringstream that records the TexRow information
and let us extract a texstring from it).
texstrings can be passed around and output to otexstream and otexrowstream,
which produces an accurate TexRow information by concatenating TexRows.
Note that the lyxrc.document_path variable corresponds to what we
call the "Working directory" in the GUI preferences dialog.
Setting document_path to "." makes it so when LyX is started from a
directory, that directory is the default path for many of LyX's
operations, such as the following:
- new file, new from template
- adding a custom BibTeX file
- GUI compare dialog
- local layout button in document settings
- external material file browser
- graphics browser, include browser
The best guess for where the user wants to save or find files is the
directory the user started LyX from. Before, the default was always
the home directory. If desired, the old behavior can be restored by
changing the default path in Preferences > "Working directory".
This commit takes advantage of 9b64d7bd, which allows the use of a
relative path for path preferences.
The limit of 10% is used in both getStatus() and dispatch() to set a
minimum zoom level. Having it centralized makes the code more
readable and makes changing the minimum less error-prone.
* New virtual functions leftMargin() and rightMargin() to get rid of
drawWithMargin()
* Factor and rewrite code for borders.
* Fix several offset calculations.
Known issues:
* Borders of multicols look too good and do not correspond to the pdf
output. (non-regression)
* Bounding box for Hull (Regexp) not pixel-perfect.
* Bounding boxes of Diagram, XYmatrix, are too tight when there are
borders. Also border should be disabled. (non-regression)
A better solution would be to entirely get rid of this borrowed pointer with
unclear lifetime, but this requires to introduce a new signal for when the
buffer view attached to the GuiView has changed.
Until now this was not done for essentially two reasons. The first
one is that local switches are used for short text insertions, so that
they are unlikely crossing environment boundaries. The second one
is that if we have to close a language at the end of an environment
we would be missing the right termination command. As this last
issue can be overcome by simply storing in the stack the current
nest level with a sign denoting the kind of switch, there is no
reason anymore not to track also local languages switches.
Also factor out some commonly used constructs in order to improve
readability.
If the document language is opened outside of any environement, we risk
not closing it if no other language switch occurs. Indeed, the stack is
emptied only at the end of an enviroment. We could of course also empty
it at the end of the document, but we would have an unnecessary language
switch.
Trying to spare a few cycles by avoiding computing metrics during
screen updates and export. See also 8f86ee74, 72cf7c8f, and e36a8903.
Guillaume will tell whether this also avoids crashing his documents ;)
Some macros defined in the lib/symbols file are classified are texmode.
But the MathMacro class was missing a currentMode method for returning
this information.
When using polyglossia, lyx was making a real mess when changing
language inside nested insets. The \begin{language} and
\end{language} commands were not well paired such that they could
easily occur just before and after the start or end of an
environment. Of course this was causing latex errors such that
"\begin{otherlanguage} ended by \end{environment}".
There may still be some cases I did not take into account.
TexRow now returns a range {start, end} when looking up a particular row.
Reverse-search now selects the whole range instead of simply moving the cursor.
Add an exception to the conversion of "missing character" warnings into errors.
The PGF package deliberately uses the dummy font "nullfont" to suppress output.
Therefore, warnings about missing characters in "nullfont" are really only warnings.
Also updated the comment: "Missing character" warnigns are especially widespread
in XeTeX/LuaTeX but can also happen with "classical" 8-bit TeX.
Feel free to port this to branch.
The title is changed to "LaTeX (pdflatex) Preview", etc. depending on the
format. The actual default format is computed.
The menu name "Source Pane" is replaced by "Code Preview Pane" to better reflect
its purpose.
When resolving biblatex's xdata references, consider that xdata fields
can contain a comma-separated list of keys, not just a single key like
crossref.
In addition to the classic crossref, biblatex introduces xdata
references in order to source-out common data of entries. Entries
that have "xdata = {somekey}" just inherit all fields from the
respective @xdata entry, if the field is not already defined in
the entry itself (just like crossref, with the exception that @xdata
entries themselves are _never_ output on their own). @xdata entries can
themselves inherit to other @xdata entries (ad infinitum). So you can,
for instance, setup an xdata entry for a book series with series name
that inherits an xdata entry with information of the publisher
(publisher, address). Any book of that series would just need to refer
to the series xdata and add the number.
BiblioInfo now checks, in addition to crossrefs, for such xdata
references and inherits missing fields.
Nte that biblatex also introduces an "xref" field as an alternative to
crossref. We must not care about that, since the point of xref is that
it does not inherit fields from the target (just cites that one if a
given number of refs to it exist)
Do not assume that the /systemlyxdir path prefix in \origin refers
to the system directory of the running instance, but check through
some heuristics what the real system dir is. In this way, a document
in the system dir of any other LyX installation is correctly spotted
and the \origin tag properly updated. For example, one can use an
installed version of lyx to edit a document in the lib/doc dir of a
git repo and obtain the same result as when running lyx in place.
Revert to the strategy used at 8f86ee74 but not using mathedWordList
because it may be still uninitialized at load time. Instead, use the
globalMacros method for getting the same info.
There was a thinko at 8ec91e80, because globalMacros always returns
null for user defined macros.
It may happen that mathedWordList is not still updated at load time,
so we would still be using a bogus pointer. Better fetching the
necessary info from the global macro table.
The math macros system is quite complex. Macros are updated during
metrics calculation, so a missing update is very likely to cause a
crash. This commit tries to assure that they are updated at export
time, which also happens when the table of contents is updated.
Moreover, in order to circumvent a possible missing update, when
a math macro is detected we try to avoid using the sym_ member
of the MacroData class, as it may contain bogus values.
Load required package textcomp.
Replace call to non-existent packages textcyr and textgreek with the backup definition of the commands as done by LyX export.
Do not load marvosym (clash with pifont) (LyX does not load the package either).
Remove invalid command \\ascii.
On export, a macro defined in ERT (or not defined at all) is left
in the same environment it is entered. So, don't explicitly insert
it in an ensuremath environment when it is entered in a textmode one.
From Günter [1]:
the difference is the textcommand for ETB which changed from
{\ascii\ETB} to
0x21a8 "\\ETB" "ascii" "force=utf8" # UP DOWN
ARROW WITH BASE
because the former resulted in
l.513 \ascii
\ETB{}
! Undefined control sequence.
[1]
https://www.mail-archive.com/search?l=mid&q=nr48qn%242gb%241%40blaine.gmane.org
Fix problems revealed by hand-compiling an examining the test samples in autotests/export/Unicode-characters/:
* new definitions
* fixed definitions
* "force=utf8" when required
* some IPA symbols fail without the "extraipa" package
* fix direction of "textcommaaboveright"
A math-mode command entered in a text-mode environment is wrapped
in an ensuremath inset, as well as a text-mode command entered in a
math-mode environment is wrapped in a text inset. Who doesn't like
the extra insets can always dissolve them and rely on the wrapping
performed on export.
If the first character in the first cell of an aligned math environment is
'[', and the environment does not use top or bottom vertical alignment,
then LyX did write the '[' unprotected so that it got misinterpreted as
optional argument, both when reading the .lyx file in LyX and when reading
the .tex file in LaTeX => data loss!
The fix is to output an empty optional argument in this case, which is
interpreted as default alignment both by LyX and LaTeX. It would also be
possible to output \[ in the first cell instead, but this would be more
difficult to implement.
The \multicolumn command allows to set vertical lines for individual rows.
These are not yet displayed, but if they are supported one day, the code in
a27ff13663 needs to be adjusted. This change hints at the adjustment.
This is a fixup to commit 39329935. The two fixes are
* add forgotten offset `y' when drawing the line
* in order to have a continuous vertical line, draw from the offset of
the previous row.
Fixes bug #10363.
The window title is built from the current file name and its
mofidication state. We use our own code instead of the automatic title
bar provided when windowFileName() is set because
1/ Qt does not keep the full path name
2/ Qt does not yield a nice application name
The "read only" and "version control" status are shown in the status bar:
* for read only we use the tab read only emblem (with the right size)
* for version control, we show the name of the backend (using a new
vcname() method of the backend).
The iconText() of the view is not updated anymore, since this is
deprecated in Qt5.
Now the external material file dialog shows the file types defined in the
template again. Before this fix it did only show "All files (*)".
I don't know what the old syntax was supposed to do or whether it ever worked
with boost::regex, but with std::regex the new one is correct.
As noted in the log, this commit was a bit radical and needs some
adjustments (which was expected, actually).
Let InsetText do their own background drawing.
Fixes bug #10359.
Before, it could have been the case that
lyx -e pdf2 file.lyx
had exit code 0 even though file.lyx includes a file that exits with
error. If compiled in the GUI a warning was given, but from the
command line exit code it would seem there was no problem. The exit
code for this case is now non-zero and the word "Warning" is now
removed from the message because it should be treated as an error.
An exception is thrown from InsetInclude and is caught in
Buffer::makeLaTeXFile() and added to the error list.
The (similar) use case at #8840 is also fixed by this commit.
buffer-zoom-out can actually zoom in (by giving a positive number as
the argument), so it should only be disabled at the minimum zoom
level if it is indeed zooming out.
Similarly, buffer-zoom-in can zoom out, so it should be disabled if
the user is at the minimum zoom and it is called to zoom out.
This commit amends 8884c404.
Replace the member reference to FuncRequest in Action.cpp with a
shared_ptr. Compared to copying the FuncRequest, the shared_ptr has two
advantages:
* Recreating the menu each time creates a lot of new actions, so we avoid a lot
of copies.
* FuncRequest can remain forward-declared in Action.h.
The field prettyname can accept Unicode and therefore must be parsed into a
docstring.
Little simplification of the code on the way.
* For other fields, either a validator should be set to prevent non-ascii input
in the preferences, or they should be transformed into docstring too.
When breaking paragraph in an empty top-level paragraph, nothing
happens on screen but yet there is an undo step because the layout is
reset to what it already was.
Avoid this case.
Fixes bug #10089.
Single quotes are special to our parser and must be either escaped or
quoted if they are part of a filename, otherwise they are stripped out.
See #10342.
Since we process layouts sequentially, we export LaTeX code for the
title once we arrive to a layout that has InTitle false. If the
document then later has a layout with InTitle true, we do not
(currently) go back to add it to the title and just output it
in-place. We previously warned with LYXERR0, but since this can
cause missing or unexpected output we now warn in the GUI.
For more information, see the following lyx-devel thread:
https://www.mail-archive.com/search?l=mid&q=a65ae226-d3bd-8fc5-a93b-7bb23f1cda82%40lyx.org
Now by default all insets paint their own background when needed. This
means that 63cf3297 and part of 9940acc5 can be reverted.
To avoid extra painting, background drawing is disabled for
InsetCommand and InsetCollapsable. These insets draw background as
part of their normal drawing activity.
This will avoid drawing artifacts with InsetNewpage, InsetVSpace and
probably some others.
Fix assertion with gcc 6: The comparison function must be a strict weak
orderings and not give x < x.
Fix assertion when a custom exportable document format is given a non-ASCII
name. Use qt_ to be consistent with the rest of the code.
Use Qt's locale-aware comparison for appropriate sorting.
There was an oddity in the manual that exposed a problem with the
test for the "special case" of an inset all by itself in a pargraph.
If a font change is applied to that inset, we still need to open the
paragraph.
File format change. On format reversion, we need to put some extra code
in the local layout that emulates the 2.3 behavior.
Simply Input'ing the respective layouts is unfortunately not enough,
due to the insertion order.
See #9977
"lyxclient -g" now calls the just implemented lyx-activate (see
previous commit) after server-goto-file-row. This allows the PDF
viewer to switch to LyX after executing a reverse search.
On Linux and Mac OS, this action brings the LyX window into focus.
Such behavior is not allowed by Windows OS so instead the color of
the taskbar entry is changed to indicate that the window has changed
in some way.
The action is hidden in the shortcuts menu because it would make
sense to assign a shortcut to it. The only way to execute shortcut
would be if the LyX window is already activated.
lyx-activate will be used (see next commit) to allow the PDF viewer
to switch to LyX after executing a reverse search.
* New constant LYXFILE_LAYOUT_FORMAT in src/TextClass.cpp. This determines the
layout format corresponding to the current lyx file format.
* The Local Layout pane is changed so that the "Convert" button does not convert
to the internal layout format but to the current lyx file format, to make sure
that the file does not become unreadable with a specified earlier version of
LyX.
* If LYXFILE_LAYOUT_FORMAT == LAYOUT_FORMAT then LyX behaves as before. This is
the value defined in master.
It is currently called on hundreds of files: settings, layouts, icons, cached
graphics files (incl. graphics from files that are not opened on startup).
According to callgrind, fixing the FIXME comments could speed up startup by more
than 30%.
A static local variable is guaranteed to be initialized only once, and in time.
Lambda expressions can be used to perform complex initialization of those static
variables on the spot.
(starting from: gcc >= 4.8, msvc >= 2015)
Prevent setRange() from causing a recursive call to scrollTo(). Reduces three
calls of scrollTo() to one call for all scrolling functions of the scroll bar
(e.g. clicking on the arrow, dragging, or clicking somewhere on the scrollbar).
The function is no longer used in LyX's sources (as of the previous
comit, 9b64d7bd) and is thus removed with this commit. Perhaps the
advantage this function had over other path functions we have has
disappeared over time (see e.g. 1a7b7f65).
Before this commit, in the paths preferences tab if you put a
relative path, LyX would convert it behind the scenes to an absolute
path by evaluating the relative path with respect to the working
directory of the LyX instance where the preference change is taking
place. This seems confusing because (1) it is done behind the scenes
(after the preferences dialog is closed) and (2) if the user chooses
to enter a relative path, the safest thing to do is to preserve it
as a relative path, instead of making the assumption that the user
intended for it to be expanded to an absolute path.
An explanation of how relative paths are handled is given at the
bottom of the paths tab. Note that the height/width of the
preferences window is not changed as a result of adding this
explanatory comment because the height of the preferences dialog is
already stretched by other tabs.
This commit improves consistency in the sense that the behavior of
LyX is now the same when a relative path is specified in the
preferences dialog as when it is manually specified in the
preferences file. Before, if the preferences file were manually
edited and a relative path were inserted, the next time the user
made a change to preferences with the GUI (even if the preference
change was a different preference, e.g. instant preview), the
relative path would be silently converted to an absolute path,
evaluated with respect to the working directory of that instance.
Beyond improving clarity and consistency (IMO), this commit allows
for a new feature to be implemented of using relative paths in the
paths preferences. For example, the user may now enter '.' as the
"Working directory" path and now whenever they start LyX from a
directory and create a new file, the default location of the file
will be the directory from which they started LyX, instead of the
user's home directory which is LyX's default and is less intuitive.
No prefs2prefs work is needed because if a relative path were
entered in the preferences dialog before this commit, it was
converted to an absolute path before being stored in preferences. If
a relative path were specified by manually editing the preferences
file, then (unless the path were already automatically converted to
an absolute path by a GUI preferences change, as described above)
the behavior will be the same (the path will be treated as a
relative path).
For related discussion, see the lyx-devel thread here:
https://www.mail-archive.com/search?l=mid&q=20160616003010.bnymtcouar7g55ti%40cotopaxi
This commit removes the last use of lyx::support::expandPath() in
LyX's sources.
The Qt documentation states that tabAt() returns -1 if the position
is not over a tab. This behavior has been consistent since Qt 4.3
[1]. This commit's improvement likely makes the code faster in two
ways:
(1) we do not need to loop through potentially all tabs
(2) we only need to look up the tab index corresponding with one
position
posIsTab() is not currently used intensively so no practical gain in
speed is achieved, but it protects against future use.
[1] https://doc.qt.io/archives/4.3/qtabbar.html#tabAt
This is the default behavior of Chromium and Firefox. The main
appeal is that instead of having to precisely click on the 'x' to
close a tab, one can more easily middle-click anywhere in the tab.
The tab is closed if the middle button is pressed on a tab and is
relased on the same tab. After pressing, the user may move the mouse
over other tabs but as long as they move it back to the tab where
they initiated the press before they release, the close will
execute. This is how the feature works in Chromium and Firefox.
Nothing is done if the user middle-clicks on the blank part of the
tab bar. This is consistent with Chromium. Firefox, on the other
hand, opens a new tab. In LyX one can already double-click the blank
part to open a new tab, and in feedback from lyx-users [1] most
expected and desired that nothing be done in this case.
[1] https://www.mail-archive.com/search?l=mid&q=20160720063306.6fyarf3kywexbxvd%40steph
A chunk of code in an event handler seems to be unnecessary to me
because the event that the situation handles never makes it this far
in the event handling hierarchy. I'm not sure why this is, and thus
I'm not sure if this is true in all cases (e.g. Qt version) and if
it will be true in the future so I leave this code for now.
In redoParagraph, this should be done before coping with the insets,
other wise some graphic gliches may occur. This is a better fix for
Fixes bug #10163.
With the commit cb0c881 we reference XSendEvent in X11-lib
if qt uses X11.
For QT5, this library is pulled by Qt5X11Extras, but
for QT4 we have to add it too.
Spotted by Scott Kostyshak.
For reference, the bug was that quote insets grew bolder because, when
painted over themselves, anti-aliasing made them darker.
It turned out that the fix there created others than were
painstakingly fixed: #7164, #7165, #7174, #7193... More recently, it
created other problems:
http://article.gmane.org/gmane.editors.lyx.devel/163471
We use the right fix here:
* draw background of quote inset when not doing full repaint
* draw background of math macro template when not doing full repaint
* remove hack that grew from #4889 fix.
The default for ZOOM_OUT is -20 from a user perspective. That is,
the following are equivalent:
buffer-zoom-out -20
buffer-zoom-out
The reason for this is that the argument to ZOOM_OUT is treated the
exact same way as ZOOM_IN. The only way they differ is how the
default case is handled.
This commit also clarifies that (1) the argument may be positive or
negative and that (2) the argument is interpreted as percentage
points, not percent.
The code that specializes for double elements in the display string
does not trigger anymore: displayString() returns a single unicode
value, plus some space for french guillemets.
Use a thin space for these french quotes instead of a plain space and
remove special case in metrics().
was not English: We return the the abbreviated author "One and Two",
but translated to the GUI language; then we search that for " and "
in order to pull the authors apart again.
I've just replaced the distinct routines with a single one that handles
both cases, depending upon whether a Buffer is provided as one argument.
* Fix bug #10261 : KDE smartly adds conflicting accelerators.
* Prevent bugs like #9495 in the future.
Issues (non-regression):
* It does not appear possible to prevent Ubuntu's Unity from grabbing the
accelerators for the menus. For instance Alt+A still opens _Affichage in the
French localization.
Add a new checkbox "Save transient properties" to the "Output" panel in the
document properties dialog (now renamed as "Format").
This provides the front-end for the change at 5c2d04999.
is output when a branch is NOT activated. Fixes bug #7698.
At the moment, inversion is controlled through the branch settings
dialog. There is no provision for inserting inverted insets directly,
or for changing them from the context menu. Both of these could be
done, of course. The latter would need LFUN_BRANCH_TOGGLE_INVERTED.
The differentiation of "xetex" and "platex" is not needed here,
is ambiguous and confusing (see #10013). The code that relies on
it can/should get its information otherwise.
Furthermore, polyglossia-exclusive languages now also work with
LuaTeX, since we support LuaTeX + polyglossia.
With both Qt4 and Qt5, when using a click-to-focus policy, the first
attempt to paste a selection by middle mouse in an external application
which has no focus may fail. It is not clear why this succeeds for some
applications and fails for others, but refreshing the timestamp of the
selection request cures the issue. The cmake part is by Kornel.
See also this thread:
http://thread.gmane.org/gmane.editors.lyx.devel/162491
dealing properly with the paragraph separator tag.
We really need to use that tag as a kind of general marker for which
tags we're responsible for in a given paragraph and which tags we are
not. So the changes to InsetText.cpp use the tag as that kind of marker.
Note that, as of this commit, the User Guide again exports without any
kind of error. I haven't yet checked the other manuals.
This fixes bug #8022.
A window manager could be configured such that to maintain a certain
stack order for the windows. It would be annoying that opening a new
file through menu brings up the window, so do this only if we are
loading a file through the lyx-server.
The line felt too thin.
Note: I am still sceptical with the principle of an increase at the rate of
1/200% instead of 1/100%.
Also, I am sceptical with changing painting dimensions to int when Qt supports
doubles for everything (see e.g. 463bd17d). If the goal is to force
integer-width solid lines then one could try to disable antialiasing on Qt's
side.
I think the painter should move in the other direction, towards more doubles and
fewer ints. For instance, for Hi-DPI, Qt could probably take advantage of the
increased precision even without AA. (Then one would have to fix the problem
regarding uneven lines, mentioned in the above commit, in another fashion.)
* Underline or strike through the label as if it was text (it is).
* Strike through deleted InsetText, but let RowPainter handle the case of
non-MultiPar text insets.
* Change the colour of the frame as a cue, unless its colour is customised (not
Color_foreground). (Essentially do the border of CharStyles like Tabular does
it already.)
* The change info needs to be reset when entering InsetText. Otherwise labels
are painted with the change of their n+1-th parent.
It is not possible to use opacity effects (such as drawing an antialiased line
to strike diagonally through an inset), until the painter is fixed so that it
does not redraw repeatedly over the same spot (otherwise, the usual aritfacs
appear).
For now, pixellated lines are OK.
* Justification and nicer line breaks.
* Much nicer tooltip for lists of bibliographical references.
* Removed unnecessary iterated copies of the string buffer in
InsetText::ToolTipText() which looked bad. This function used to be costly
(cf64064), maybe it is quicker now.
After the previous commit, tooltip in the outliner are formatted automatically,
along with the other tooltips. A previous commit had already removed the
expensive call to tooltipText() that, although it gave a better rendering, was
very expensive (cf64064). This patch finishes to remove the custom tooltip
from the model data in the outliner.
(It would be nice to reintroduce a tooltip based on tooltipText(), but there
seemed to be a consensus that in that case one would prefer a less expensive
approach that computes the tooltip on the fly.)
* The tooltips in the list of modules now include the names of the modules.
* The tooltips of modules more consistent across the widgets.
* Sort the list of modules according to the locale (i.e. "É" comes before "F").
* Replace a hand-made sentence boundary finder by Qt's.
* New function formatToolTip(QString):
Format text for display as a ToolTip, breaking at lines of a certain
width. Note: this function is expensive. Better call it in a delayed manner,
i.e. not to fill in a model (see for instance the function
ToolTipFormatter::eventFilter).
* Install a global event filter that formats tooltips on-the-fly
Inspired from
3793fa09ff
but much improved.
When is formatToolTip called automatically? Whenever the tooltip is not already
rich text beginning with <html>, and is defined by the following functions:
* QWidget::setToolTip(),
* QAbstractItemModel::setData(..., Qt::ToolTipRole),
* Inset::toolTip() (added in one of the subsequent patches)
In other words, tooltips can use Qt html and the tooltip will still be correctly
broken. Moreover, it is possible to specify an entirely custom tooltip (not
subject to automatic formatting) by giving it in its entirety, i.e. starting
with <html>.
This is the well known file locking problem: The TempFile class keeps the
created file locked for the own process, and this prevents the CAS to read it.
We need to invalidate the BibTeX cache when undoing or redoing. I do
not like having to do it for every undo or redo. We should only have
to do it if we restored or deleted an InsetBibTeX. But there is no
way, so far as I can see, to do it that way. I tried.
The main thing it does is integrate mouse-modifiers into the
FuncRequest machinery. Previously, these had to be passed
separately, which led to some ugly function signatures.
There was also an unnecessary form of the constructor, which
can now be removed.
No change of behavior is intended.
The only exceptions are:
- The purpose of the header is to drag in the used symbol, e.g. unique_ptr.h
- The used symbol is inside a class or a namespace other than lyx
The reason for this is that global 'using' statements effectively forbid to
use the used symbols in any other namespace in the whole program, since simply
adding or removing an #include of the corresponding header subtly changes the
name lookup. The namespace lyx is sort of global, so it should not have these
statements either.
Maxima uses \it as a markup for multiletter variables. However,
it has been reported that since texlive 2016 using \it in math
mode produces an error, even though I was not able to reproduce.
Anyway, this can be avoided by replacing the old-style construct
"{\it ...}" with the new-style one "\mathit{...}".
The problem has also been reported upstream:
https://sourceforge.net/p/maxima/bugs/3181/
but this workaround will hold whatever the resolution.
output of tags until we know they're needed. In the case of HTML
tables, empty cells should of course be output, so we need to force
the tags to be output.
The external date inset was implemented as a demonstrator for external insets
in general. It was never intended for production code. Now that we have several
external insets defined we do not need the demonstrator anymore. This fixes
bugs #4398 and #9948.
This was dead code that did never work, and most of it was boilerplate that
you can steel in 15 minutes from any existing math inset. Apart from that it
did contain a pointer to InsetXYMatrix which would create the same problems
we saw with the macros.
This requires to change many docstrings into std::strings. The logic behind that
is that they represent a fixed set of math fonts, and therefore “string” means
here “poor man's enum” rather than text (this is consistent with MetricsBase).
Profiling of scrolling inside a document over macro-instensive areas:
Before the patch:
44,1% BufferView::updateMetrics()
-> 34,8% InsetMathHull::metrics()
-> 9,8% FontSetChanger::FontSetChanger()
28,4% BufferView::draw()
After the patch:
35,3% BufferView::updateMetrics()
-> 27,2% InsetMathHull::metrics
-> 0,4% FontSetChanger::FontSetChanger()
47,5% BufferView::draw()
FontSetChanger::FontSetChanger() is made 41x less expensive (with reference
BV::draw()) just by removing this conversion. The remaining 0,4% could be
squished by replacing the strings with a proper enum, but this is premature. Of
course, this only treats the symptoms: there is no good reason that this
function is called 45500 times over the time of 40 repaints.
Replace the manual manipulation of a stack of RowEntries with a Changer
function. When I introduced the stack of RowEntries, I did not know about the
Changer mechanism.
* Inset::canTrackChange() had two meanings: can it deal with change tracking?
Will it paint its own CT status? The latter information is now given by
Inset::canPaintChange().
* Line thickness computation is moved from RowPainter to MetricsBase.
* Painting function for Changes moved to lyx::Change. (One new, that strikes
diagonally.)
RefChanger temporarily assigns a value to a non-const reference of any
kind. RefChanger provides a flexible and uniform generalisation of the various
scope guards previously derived from the old Changer class in MetricsInfo.h.
As before, a temporary assignment lasts as long as the Changer object lives. But
the new Changer is movable. In particular, contorsions are no longer needed to
change a private field. Special code can be moved into the appropriate classes,
and it is no longer necessary to create a new class for each specific use.
Syntax change:
FontSetChanger dummy(mi.base, value);
-> Changer dummy = mi.base.changeFontSet(value);
New function for generating arbitrary Changers:
Changer dummy = make_change(ref, val, condition);
Bugfix:
* Fix the display of \displaystyle{\substack{\frac{xyz}{}}} (missing style
change).
The command 'lualatex' can produce a DVI with the option
--output-format=dvi
It is best to keep things as is because it is better to guess a PDF
than to guess a DVI (we do not use that feature of the 'lualatex'
command internally; we use 'dvilualatex' instead). However, we
should ideally get this information in a more robust way.
Thanks to Günter for pointing this out.
XeTeX with TeX fonts is only safe with ASCII input encoding (see #9740)
and we therefore force "ascii" when exporting with XeTeX and 8-bit TeX-fonts.
However, "utf8-plain" is a "power-user" option, which allows to switch off LyX's
encoding of the LaTeX file:
keep this also for "XeTeX with TeX fonts".
The user is responsible to ensure all characters can be processed and are
correctly shown in the output. The provided test sample shows the problems
with this encoding without special measures (like loading fontspec in the
user-preamble or a document class).
Boost.Signals is deprecated. This fixes bug #9943.
The only thing left to do is to rewrite (or get rid of) the boost -mt test
in config/lyxinclude.m4 not to use signals anymore.
It is no longer needed to create fake copy constructors and assignment and to
deal with deletion by hand, thanks to unique_ptr, the inference of move
constructor and assignment operator, and the compatibility of standard
containers with movable objects.
Two better ways of making a class non-copyable in C++11:
* Store the p. impl. in a unique_ptr (for the cases of classes with p. impl.),
or:
* Define publicly the copy constructor and assignment as deleted
Lots of other classes could be cleaned up in this way.
This is a mechanical replacement. For now it seems that unique_ptrs are
essentially used for exception-safety. More could certainly be done to clarify
pointer ownership in general.
The parameter passed to allowDisplayMath will need to be copied, so it
made sense to pass it by value. Since Coverity complains about that,
the code is rewritten to make the copy explicit.
This code is signalled as a copy and paste error, but it is a false
positive.
According to the documentation, adding a comment starting with
// coverity[name_of_error]
should be enough to flag the false positive.
As discussed on the list. If no C++11 compiler is found configuration stops
with an error. There are now unneeded parts of boost, the will be removed in
a second commit.
Qt only supports SVG 1.2 tiny, so we prefer to convert on our own if an
explicit converter is defined and the converter cache is used (otherwise
the conversion would be too expensive).
The version of LuaTeX that ships with TeX Live 2016 now gives the
following message after processing a document that yields no pages
of output:
"warning (pdf backend): no pages of output."
The lowercase "n" in "no" is a change that caused our parser not to
pick up the message.
A few parts of our code depend on correctly identifying the output
format of LaTeX commands. One specific bug is that because the
output file was not correctly set, it was not removed after an
error. For example, this commit fixes the following bug:
1. Create a new document that contains "hello\blah" where \blah is
in an ERT box.
2. Compile with PDF (LuaTeX). You'll get an error because of \blah.
3. Close the error dialog.
4. Remove the text "hello" and compile again with PDF (LuaTeX).
The error dialog is shown and the "Show Output Anyway" button is
enabled. If you click it, it shows the previously compiled PDF (with
the text "hello"). With this commit, the button is correctly
disabled (and the output file is deleted).
Some qt versions report both "jpeg" and "jpg" as loadable file extensions.
In this case the jpg format was added twice previously. This does not happen
anymore with the new code, and it works as well if only "jpg" or only "jpeg"
is reported.
It is wrong to assume that direction is left-to-right when no indication exist.
Add a new enum with values LtR, RtL and Auto to be used as argument of
the private text() methods. When direction is Auto, let Qt decide how
the string shall be layed out.
Fixes bug #10169.
TocModels::reset() in GuiView::structureChanged() collapses the TocWidget, and
therefore requires an update right after, which was missing.
In fact, profiling TocWidget::updateView() shows that delaying the update is
good only for fast keypresses (essentially movement). It costs 5% of a
char-forward operation in a document with approx. 100 table of contents
items. The update optimisation has been rewritten to take this data into
account.
The new functions parBottomSpaging and parTopSapcing return below/above each paragraph.
This allows to remove the TopBottomSpace argument and makes the code a
bit clearer.
Now that Row has a pit() member, it is possible to use it instead of passing an extra pit_type parameter to a function which already has access to a Row.
Change the various paint* helpers to take a single row element as argument.
Do not update x_ in the various paint* helpers. Constify them. Update x_ in paintText and paintOnlyInsets instead.
Remove an empty call to paintForeignMark in paintInset (the call did nothing since orig_x == x_ at this point).
It is actually easier to set the 20 pixels margin in redoParagraph, since it is not necessary to take newlines in account when deciding what is the real last row of the paragraph.
Moreover this solves the following bug (present in 2.1.x too): when the document ends with a newling, the bottom margin disappears.
Update PAINTING_ANALYSIS with new tasks.
* remove optional arguments to the helpers that use a FontInfo
* add a textwidth argument to the text() methods that are used by rowpainter.
Now textwidth is only computed if a null value was passed to the
text() method. This means that in the use case of rowpainter, no
textwidth needs to be computed.
The initial values for maxasc and maxdes (renamed from maxdesc) is obtained as a maximum of max ascents/descents of all row elements.
This allows to get rid of Paragraph::highestFontInRange and FontList::highestInRange.
Some auxilliary variables declarations are also moved to where they are needed.
Let breakRow return a boolean indicating whether an additional row is
required (after a newline) and use that to replace the code that added
an extra row when a paragraph ends with a newline.
There are two main cases:
* when drawing is disabled from the start, use a simplified code that only paints insets (in order to cache positions).
* when the row is not visible, do the same.
The goal of this optimization is to be able to always run a no-drawing draw after the metrics have been computed.
This is a first cleanup step. More complex rules have to be
implemented on top of this.
Use proper spacing \thinmuskip, \medmuskip and \thickmuskip instead of
ad-hoc values.
Rename isRelOp to isMathRel and introduce isMathBin and isMathPunct
(for InsetMathChar and InsetMathSymbol). Update the categories of
characters in InsetMathChar according to LaTeX source (fontmath.ltx).
Set correctly the spacing around mathrel, mathbin and mathpunct
elements. Use \thinmuskip around MathDelim instead of a hardcoded 4.
This is related to bug #8883.
There is already a spacing of 2 pixels on each side of a button (e.g. collapsed inset). There is no need to add one extra pixel for command insets.
Fixes part of bug #10149.
The computation of the width of the button was wrong. If <--> stands for TEXT_TO_INSET_OFFSET/2 spacing, and if `[]' marks the button's limits, then the intent is
<-->[<-->button text<-->]<-->
Therefore the physical grey rectangle width is
width - Inset::TEXT_TO_INSET_OFFSET
With this change, the spacing on the right of the button is not larger than the left one.
Fixes bug #10147.
The way it works is:
* the inset defines allowParagraphCustomization() correctly
* Text::getStatus acts on it.
Note that, in Text::getStatus, testing for cur.inset().allowParagraphCustomization() does not make much sense, since one should pass the cursor idx as parameter. Actually, for some reason the safest bet is to use the owner of the Text object as inset.
The way it works is:
* the inset defines forcePlainLayout() correctly
* Text::getStatus acts on it.
Note that, in Text::getStatus, testing for cur.inset().forcePlainLayout() does not make much sense, since one should pass the cursor idx as parameter.
There are many other lfuns that do not have to be handled directly by insets. InsetScript in particular has tests for way too many lfuns.
This method did access more CursorSlice than Text. It is only a setter for
CursorSlice with some bound checking. The new signature is
setPitPos(pit_type, pos_type).
The old name would be confusing wrt setSelection(), which does additional checks.
This one is a pure acessor, and the more complete methods are
* setSelection(), which avoids empty selections
* clearSelection(), which resets anchor, and sets word selection and mark more to false.
Most of the code should use these two instead of selection(bool), but this is for later.
It turns out that it did not take off since introduced in 2011. It is better to remove it and the associated boost headers (extract.sh was run against boost 1.60 to do the update).
Since we will move away from several boost classes when transitioning to C++11, it is good to start by removing lesser used ones.
It is easier to use instead getVectorFromString for the use we have of this tokenizer. The two places are environment.cpp (path stuff) and qt_helpers (file fileters). The new code is much shorter.
This allow to remove boost/tokenizer.hpp and friends from our boost tree.
Some headers contain
class Foo;
whereas there is no class Foo.
The list of class statements is given by
classes=`git grep '^\(class\|struct\) [a-zA-Z_:]*;' src | sed 's/^.* \(.*\);/\1/'|sort -u`
The ones that are useless are:
for c in $classes ; do grep -r "\\<$c\\>" src| grep -vq '^[^:]*:\(class\|struct\) [a-zA-Z_:]*;' || echo "$c"; done
Those two functions used two different hackish and buggy
implementation to know when the function is disabled. Replace that by
asking the containing inset whether it accepts inserting display math
inset.
Fixes bug #10033.
When in a tabular cell, "this" is just a lone InsetText, while cur.inset() is the whole tabular. This makes a big difference, especially when one wants to count cells.
Fixes bug "9954.
Compiling different parts of the sources with different WINVER may lead to
subtle and hard to detect problems. Better use the same value everywhere.
The existing error message suggests that this was wanted anyway, and it
fixes a compiler warning when cross-compiling for mingw on linux. Our code
does not require a specific value, only a minimum value of 0x5000, which
means the resulting executable will require at least Windows 2000.
Only the ones I understand (DWORD is always unsigned). There are more:
../../src/Server.cpp: In member function ‘bool lyx::LyXComm::pipeServer()’:
../../src/Server.cpp:280:10: warning: enumeration value ‘CONNECTING_STATE’ not handled in switch [-Wswitch]
switch (pipe_[i].state) {
^
../../src/Server.cpp:347:8: warning: ‘success’ may be used uninitialized in this function [-Wmaybe-uninitialized]
&& status == pipe_[i].iobuf.length()) {
^
Use the standard way to check for the resource compiler, as e.g.
libtool does it: AC_CHECK_TOOL does already provide some cross compiling
magic, and we do also get an error now at configure time if windres is not
found.
"Output changes" alters the preamble even in the absence of tracked
changes. Therefore, not being able to notice when it is activated can possibly
yield hard-to-debug compilation failures.
The windres program is typically not called windres for cross compilation.
Now you can call configure with the argument
WINDRES=x86_64-w64-mingw32-windres
in order to use the windres program on a standard debian installation.
The included iconv should not be used on Linux or OS X, but (depending on
local configuration) it might be needed for crosscompiling a mingw target
from Linux. Now the user can choose whether to use the included iconv or not.
cmake does already support that.
eilseq.m4 was taken from the original libiconv 1.14 package.
On mingw-w64, long long (64bit wide) is larger than long (32bit wide).
Therefore we need some more specializations for string, docstring,
otextstream and << overloaded ostream functions. The configuration code
is by me, the source code changes by Shankar Giri Venkita Giri (bug 10053).
This is needed for warning-free compilation with mingw-w64, and does not hurt
for other build configurations. Patch by Shankar Giri Venkita Giri (bug 10053).
The included zlib should not be used on Linux or OS X, but (depending on
local configuration) it might be needed for crosscompiling a mingw target
from Linux. Now the user can choose whether to use the included zlib or not.
cmake does already support that.
zconf.h.in was taken from the original zlib 1.2.8 package. The generation of
zconf.h was made equivalent to the one generated by cmake.
(#8738)
For efficiency, we add a new flag to the buffer indicating when changes are
present. This flag is updated at each buffer update, and also when explicitly
requested via a dispatch result flag.
If we do not do that, it is not possible to position the cursor after
a long inset with the mouse.
To do this, it is necessary to add the pit information to the Row
object. This is a good idea in any case, and will allow to simplify
some code later on.
Fixes bug #10094.
The timer logic introduced to solve bug #7138 was not entirely reliable; in
particular it resulted in spurious updates (noticeable by the treeview
collapsing just after one opens a branch, in particular).
This commit cleans up the timer logic. I followed the original design decision
of having an immediate update followed by a delayed update. Now the updates are
appropriately compressed and done after a delay of 2s (as can be noticed with
the treeview still collapsing, unfortunately, but after a more predictable
delay...).
4d1ad336fixed#9754 but caused perf issues by cancelling the gains of having a
timer (introduced after #7138). This introduces in GuiToc::enableView() a
lightweight check of whether the widget should be updated. The logic is inspired
from GuiViewSource::enableView().
When document settings are modified, a command
inset-forall Branch inset-toggle asign
is run to open as needed all branches. At the end of the said loop,
the cursor is reset to where it was. However, the cur_after undo
element member is not set because it already had a value.
To make this work as expected, it is necessary in LFUN_INSET_FORALL to
reset the cursor before ending the undo group and to insert a dummy
recordUndo call.
Fixes bug #10097.
Deriving from std::vector to provide helper functions appears a touch
excessive. Use typedef instead and move helper functions to the base class. New
header Toc.h provided to replace forward-declarations.
Remove TocIterator which is useless.
The old name conflicted with the newly introduced Inset::isTable.
Now the meaning is as follows.
* Inset::isTable() is true when the inset is composed of lines and columns
* InsetMathHull::allowsTabularFeatures is true when the current type of hull allows for tabular-like functions.
While a one paragraph large collapsable inset (containing for example a tabular) could be very wide and trigger horizontal scrolling, the code that makes collapsable insets wide when they contain several paragraphs would actually make them narrower in this case.
Typical example is a wide tabular and a caption in a table float, where horizontal scrolling would not trigger.
The purpose of this custom widget is to allow the use of a QToolBox in a limited
area. The stock QToolBox does not provide a minimum size hint that depends on
the size of the pages; it assumes that there is enough room. This subclass sets
the minimal size of the QToolbox. Without this, the size of the QToolbox is only
determined by values in the ui file and therefore causes portability and
localisation issues. Note that the computation of the minimum size hint depends
on the minimum size hints of the page widgets. Therefore page widgets must have
a layout with layoutSizeContraint = SetMinimumSize or similar.
inset-select-all has 3 levels
1. select current cell
2. select all cells
3. select inset from outside.
The second level makes sense for tables (text and math), but not for things like a math fraction.
Introduce a new method Inset::isTable() that allows to detect this case properly and skip level 2.
This is done by implementing the clickable method. It is not possible yet to have the usual left and down arrows, because Qt does not implement them as far as I can see.
Factor the code that triggers row/column selection and fix the logic. Now it is possible to select also at the right of the tabular inset.
When several bufferviews exist for the same inset, the data that depends on the view width have to be BufferView-dependent. While this is the case for several mutable members of InsetCollapsable, some were missing.
This commit makes button_dim_ (renamed from button_dim) and openinlined_ bv-dependent.
Get rid of the hitButton function.
Remove the bv-independent geometry() method and implement editable() explicitely instead.
Fixes bug #9756.
"echo -e" is definitely not portable. Use a plain loop instead.
Also use the automake silent rule mechanism to make the generation of monolithic source files visible.
When the box has a special width, one should not consider that as a fixed width. Otherwise, due to implementation quirks, the width will be set on screen as 1 inch.
A better solution would be to actually set the width by taking in account the contents width, height ans total height. This is not very difficult, but I do not know whether it would workout well in the work area.
Fixes bug #10048.
The purpose of this custom widget is to allow the use of a QToolBox in a limited
area. The stock QToolBox does not provide a minimum size hint that depends on
the size of the pages; it assumes that there is enough room. This subclass sets
the minimal size of the QToolbox. Without this, the size of the QToolbox is only
determined by values in the ui file and therefore causes portability and
localisation issues. Note that the computation of the minimum size hint depends
on the minimum size hints of the page widgets. Therefore page widgets must have
a layout with layoutSizeContraint = SetMinimumSize or similar.
Ask the user for removing bindings when using the "restore" button (#9174).
Fix the already-bound-key detection logic.
Don't forget to trigger the search when initializing the search LineEdit with
its former value.
Remove in particular all comparisons < and >= involving HullType.
Add a guard to make sure that mutate() only operates on types it has been
designed for. Then I figured I could use this new knowledge to give feedback
when math-mutate is not implemented via getStatus(). (To test this, insert a
regexp in Advanced Search & Replace and try to change it into a standard
equation via the contextual menu.)
AMS align environment should have some spacing between odd and even columns.
Add a new virtual method displayColSpace() to InsetMathGrid, InsetMathHull and
InsetMathSplit.
A longstanding problem... (related: #1861)
The columns in AMS math environments have a fixed alignment (colAlign() in
InsetMathGrid.cpp). We set this alignment for display (Georg's
displayColAlign()) in InsetMathHull and InsetMathSplit. This is done according
to tests and documentation for the various environments.
There is also some mechanical code factoring via colAlign().
Finally, I disable setting the horizontal alignment in InsetMathSplit, which has
no impact on the LaTeX output, and has no longer any impact on the screen. (As
for vertical alignment I discovered that it was in fact customisable for
\aligned & friends! I hope that the more faithful interface will let other
users discover that too.)
The offending code appears to have been introduced a long time ago. My
understanding is that it is no longer relevant. Notably, it only appears on copy
and not on cut, which tells us that: 1) it should be safe to remove it, 2) we
should remove it for consistency.
With Qt 5, our code did not correctly detect when icons were
available and thus tried to use nonexistent icons.
QIcon::hasThemeIcon(theme_icon) returns true when theme_icon is
empty. We now rely on the behavior that QIcon::isNull() returns true
if the icon is empty.
The same code is used with Qt 4 and Qt 5.
This is used when scaling graphics previews. It is also used on a rare occasion
to scale instant previews when the user's configuration mixes low-dpi and
high-dpi monitors (#10114).
With this change, it becomes possible to run the following commands:
inset-forall Separator:latexpar char-delete-forward
inset-forall Separator:parbreak inset-modify separator plain
The first one deletes all latexpar separators. The second one turns parbreak
separators into plain separators. This is safe, flexible, and avoids adding a
new LFUN.
2.1.x allows some document settings to have negative values where
2.2.0rc1 does not (because of the bug fix at 9e166088). If a user of
2.2.0rc1 opens a document from 2.1.x that contains one such negative
value, it will appear as though no change to the document settings
can be saved because 2.2.0rc1 treats the document settings as
invalid immediately on opening the dialog. Further, unless the user
manually goes through each tab they will not see the red text next
to the input that is now considered invalid. This could lead to
confusion for users. One example of such confusion is [1].
The following settings now allow negative values, which is
consistent with 2.1.x. Negative values in these settings do not lead
to LaTeX errors:
- Text Layout tab: the two line edits enabled with "Custom"
- Page Margins tab: all eight line edits
The following settings are not changed by this commit, so they now
(with 2.2.0) do not allow negative values that 2.1.x allowed. This
change makes sense because negative values lead to LaTeX errors in
these cases:
- Page Layout tab: the "Height" and "Width" line edits, which are
enabled when "Custom" is selected
[1] https://www.mail-archive.com/search?l=mid&q=CAGZ2pgXqf27UaAaQ%3De_wFz1fGTa6Yv0iFyS97qu1C7B5R59irg%40mail.gmail.com
An undocumented behaviour of QClipboard::mimeData() is that it can fail on
windows due to the specificities of the windows API that allow a race condition.
In particular it seems that querying the clipboard as soon as the dataChanged()
signal is received favourises this race condition.
Thanks to Trac user bquistorff for the explanation and a proof of concept patch.
This was a regression of 8aa37c43. I did not take into account that end_pos
could be -1, so the code that checked whether a pair of braces needs to be
inserted between two hyphens did not work for that case. Now we check for
the length of text_, which should be done anyway, and only take end_pos into
account when it is not -1.
http://thread.gmane.org/gmane.editors.lyx.devel/161725
These wms have trouble with the fix at b5a2f1c7, probably more precisely with
the trick to force the calculation of the actual sizes before the display
(layout->invalidate() and the code around it).
This patch gets rid of the code that forces the calculation. As a consequence,
the minimum sizes are again incorrect the first time the window is shown. They
are only correct the second time the window is shown. Now here is the trick: LyX
remembers the sizes of windows between sessions. Therefore, as soon as the good
minimum size has been set, the good size is remembered for the next
session. Thus, in the following sessions, even though the minimum size is
incorrect the first time, the dialog still opens with the good size. So the user
does not see the problem in practice, apart from the very first time.
This is meant as a temporary workaround.
* provide GuiApplication::typewriterSystemFont() to get a fixed font consistently
* enlarge fixed font on Mac because of the too small default Qt system font
* use it in source pane, progress view, log view and document preamble editor
Regression at cfeddb929. If a flex inset has no layout upon saving (e.g. if a
module has been deleted) then its name became lost. This checks whether the name
resolution, introduced with the ObsoletedBy tag, comes back empty-handed (which
it will if the layout is not defined). In this case, we do as was done before
cfeddb929.
In addition, the use of support::token to strip "Flex:" off the beginning of the
name introduces a regression if somebody used a name containing ":". This
replaces it with support::split.
This is the same as the parbreak separator and is represented on screen
as the old parbreak. Old parbreak separators are converted to latexpar
separators when they are used for introducing blank lines in the
latex output rather than for separating environments.
Instead, parbreak separators are now represented on screen by a
double line. In essence, latexpar and parbreak separators produce
the same output but are represented differently on screen.
The context menu does not account for latexpar separators and only
"true" separators can be turned each into the other one.
7b1107d7 introduced the following inconveniences which are regressions to 2.1:
* The citation dialog can open with vertical scroll bars in the options
* The citation dialog can open with horizontal scroll bars, especially if the
translated text is longer than the original text (e.g. in FR)
* Resizing the dialog is inconvenient because it increases the gap between the
options. This is unlike before when the dialog could let us see more of the
reference list when enlarging.
This is because the QToolbox that the above commit introduced is not natively
aware of the sizes of its page sub-widgets. The widget is not conceived for this
use, where the space is scarce.
Geometry values provided in the ui file (automatically computed by qtcreator I
suppose) somehow gave the illusion that it worked, but relying on such values is
not portable : it does not take into account the specific theme, font sizes and
localization. This explains why it failed on my side and will probably fail in
other settings too.
Luckily, there is a simple way to make QToolbox suitable for the current use,
which is to add the "missing link" which computes its size based on the minimal
sizes of its pages. The result looks very nice and intuitive. It solves all the
aforementioned issues.
The term LongTable has been deprecated and moreover the renaming makes the interface easier to the eye.
File format updated to 507. (conversion based on jamatos patch)
Layout format updated to 60.
tex2ylx tests updated.
Document EmbeddedObjects.lyx has been updated.
There are two regressions that are fixed here:
* empty rows at the end of a paragraph (think after newline at end of
paragraph or empty line in Verbatim) do not have an end-of-par
marker. This is fixed by removing the early return in breakRow and
letting the whole function be executed. This requires to relax an
assertion in Paragraph::fontSpan. It makes sense here to query
position at the end of the paragraph.
* a newline at the end of a paragraph will be followed by and
end-of-par marker. This is fixed by skipping the end-of-par marker
when a new row has been requested.
The context menu of newline insets was completely greyed out if one clicked
at the right of the inset. Thanks Scott for finding this. The fix is to undo
the cursor movement also for insets without settings, but with a context menu.
According to callgrind, the time taken to display the symbol dialog is spent in
updateSymbolsList. No longer translate strings for every symbol. This speeds
it up more or less by a factor two.
The stmary font has an unusual large descent that was causing a large
gap between lines in the math delimiter dialog because of the \llbracket
and \rrbracket delimiters. The solution is to force Qt using the same
size for all elements of the QlistWidget widget instead of letting it
compute the size of each element.
When a row is broken by for example a display math inset, it is
possible to put the cursor at the end of the previous line using the
boundary setting of cursor.
For newline insets and separator insets, we want to force the cursor
to be before this inset. Also, in the other cases, do not force
boundary property (effectively reverts part of f29e7803).
* breakRow: remove wrong condition that would silently eat the contents of the
paragraph when the window is narrower than left margin
* breakRow: make sure that there is at least one element in each row
* breakAt: when force-breaking a row element, make sure it is not empty. Doing
so may create empty rows and therefore a endless loop.
Fixes bugs #9962 and #10001.
The existing code already avoids merging with typewriter font, but it does not work with LyX-Code, where the typewriter family is inherited. Therefore it is Cursor::real_current_font that must be tested.
Fixes bug #9987.
removeShortcut() restores default settings, therefore was used incorrectly. I
introduce deactivateShortcuts() which only removes assignments.
Clean up a bit the lack of view / model distinction (getting rid of the crashing
code at the same time).
Repair inconsistency of the selection in the "modify" case. (regression at
717d19d3c)
Make the test for existing bindings a bit more robust. (Not perfect yet.)
Focus on the item that has just been added/modified. (cosmetic)
This fixes a failing unit test with 32bit gcc 4.9.3 and -O2 optimization:
It computed 9953 instead of 9954 for Length::inPixels() of value 2342.
The reason for this is probably different rounding behaviour caused by storing
the unrounded value in a processor register (uses 80bit accuracy) vs. writing
it back to memory (uses 64bit accuracy). The unrounded value is very close to
9953.5 (which is not representable as an exact IEEE floating point value).
Apart from that, having a proper function for rounding makes the code more
readable, and has the nice side effect to make Length::inPB() work for
negative lengths as well.
\origin is a transient property in the sense that in a collaborative context
each co-author is going to have a different value for it. Moreover, \save_origin
is a global (lyxrc) setting that cannot yet be deactivated for a single file,
but one author's setting is going to impact other authors, even those who have
set save_origin=false.
There is only one location where lyxrc.save_origin produces an effect, modified
by this patch. With this patch, everything happens as if lyxrc.save_origin was
false whenever save_transient_properties=false.
This is not a file format change. When a file has
save_transient_properties=false but an origin is set (for instance a file
produced before this patch) then the origin produces its effect before the file
is saved. This produces the same effect as if the user decided to disable
save_origin between two sessions.
This concerns InsetPreview, InsetIPA and InsetMathHull.
Caching such a value is bad when opening the same buffer in two views.
In this case, it is not necessary to remember use_preview_ at all,
actually.
Also remove private member dim_ which is not used and remove some trailing whitespace.
Fixes bugs #9085 abd #9957.
Since the low-level version of tabular features is only called by the high-level one, it does not make sense to record undo there. It is much better to do it once in the high-level handler, rather than 37 times (yes!) at lower level when the tabular GUI calls tabular-feature with all the settings at once.
With large tables, this avoids to keep 37 copies of the table in Undo stack.
As an added bonus, this fixes bug #9960.
When an inset is separated from the adjacent string by a space, it is
reasonable to be able to break the string after the space.
Unfortunately, QTextLayout does not do that.
This patch reverts the workaround inserted in 71378268 and replaces it
with a different trick: the string is enlosed between a pair of
zero-width non breaking space characters, so that the leading/trailing
spaces are now normal spaces, where QTextLayout will agree to break
the string.
Fixes bug #9921 for good.
We open the input file now twice: The first time in latin1 encoding to read
the document encoding from the preamble. This does always work, since
traditional TeX does not allow non-ASCII contents without an encoding changing
command (except for comments, but we do not need them, and using latin1 rather
than utf8 ensures that they do not produce an iconv exception, but are simply
recored with wrong characters), and we do detect the utf8 based TeX engines
XeTeX and LuaTeX as well. The second time we open the file directly with the
document encoding.
This fixes a few tex2lyx tests on OS X, since changing the encoding of an
open file steam does not work with clang on OS X. Files using more than one
encoding are still broken, but all single-encoding files are fixed now.
Changing the codecvt_facet of a file stream after the file has been opened
does not work with clang on OS X. Therefore we avoid it if possible (i. e. the
new encoding is the same as the old one).
This does not make any difference currently, since the only instance of the
Preamble class is a global one, but it is cleaner and will be needed for
parsing the encoding with a second Preamble instance.
This is a fixup to commit cdb9f043, which fixed bug #9757.
It is necessary to make a special case for inserting an InsetCaption
in a tabular cell, because this commonly happens in longtable mode.
Fixes bug #9945.
* Increase LyX format
* New function convert_info_insets in lyx2lyx_tools.py
Use this function in the future for future updates of info insets
* Convert "inset-modify tabular" to "tabular-feature" in info insets
* Remove icon naming hack regarding "inset-modify tabular"
The tabular-features LFUN was merged with "inset-modify tabular" when
simplifying the tabular dialog at b5049e7. This choice later indirectly caused a
few regressions (#7308, #9794).
I reintroduce tabular-feature to allow more flexibility for user
commands, whereas "inset-modify tabular" is now reserved for the tabular
dialog. In particular, inset-modify tabular is no longer caught by math grid
insets. The name tabular-feature is kept to avoid renaming icons.
Known issues:
* After successfully applying a tabular command, the cursor is truncated to the
table.
* Note that the tabular dialog still has similar issues that are inherited from
the achitecture of the dialog menu. For instance the pref change can be
mis-dispatched to an inset inside a cell and cause an error, for instance:
Lexer.cpp (934): Missing 'Note'-tag in InsetNote::string2params. Got
tabular instead. Line: 0
Maybe the inset-modify LFUN should be modified to treat commands coming from
the wrong dialog (by checking the type) as unknown and undispatched so that
the parent can get it. In that case a non AtPoint variant of inset-modify
could be reintroduced in order to generalise tabular-feature. See:
http://mid.gmane.org/n4rdk1$efj$1@ger.gmane.org
External processes cannot access files which are open in LyX. Therefore the
temp files created by the external inset need to be closed right after
creation. The symptom was that the date inset did not produce any outout on
windows (bug 9925). This change reverts a small part of f09a9fe2.
Although the date inset is unimportant and will probably be removed, this
change is important for all external insets that make use of temp files.
Unfortunately the footmisc package does not work together with hyperref:
Before 0bf8b8a1, a footnote in a section title was created as a link in pdf
outpout, after 0bf8b8a1 ist was no link anymore. For now we revert to the old
code, and wait until the footmisc and hyperref packages are made compatible.
The important thing is actually not the date inset, but the converter
machinery, which did convert the time stamps of two unused freshly created
temp files, which does not make sense, and did work before f09a9fe2 only by
accident.
This fixes the date inset on linuy, but not on windows, probably due to
different file locking semantics.
AMS align environment should have some spacing between odd and even columns.
Add a new virtual method displayColSpace() to InsetMathGrid, InsetMathHull and
InsetMathSplit.
I have no clue why this was automatically committed, I just applied the path, nothing more.
This reverts commit bb5470b5d1.
# Conflicts:
# src/mathed/InsetMathGrid.cpp
# src/mathed/InsetMathSplit.cpp
AMS align environment should have some spacing between odd and even columns.
Add a new virtual method displayColSpace() to InsetMathGrid, InsetMathHull and
InsetMathSplit.
A longstanding problem... (related: #1861)
The columns in AMS math environments have a fixed alignment (colAlign() in
InsetMathGrid.cpp). We set this alignment for display (Georg's
displayColAlign()) in InsetMathHull and InsetMathSplit. This is done according
to tests and documentation for the various environments.
There is also some mechanical code factoring via colAlign().
Finally, I disable setting the horizontal alignment in InsetMathSplit, which has
no impact on the LaTeX output, and has no longer any impact on the screen. (As
for vertical alignment I discovered that it was in fact customisable for
\aligned & friends! I hope that the more faithful interface will let other
users discover that too.)
When hitting Enter after a non-standard layout a plain separator is
now inserted. This seems to be preferred and more in line with what
is obtained with the "Alt+M P" shortcut.
Increment LyX format to 504.
With this new parameter, the user can indicate that some other parameters that
are frequently switched must not be recorded in the file (as if they were a
setting specific to the user or transient, rather than a document setting). This
will play nicer with version control systems.
See the discussion, e.g.:
http://thread.gmane.org/gmane.editors.lyx.devel/157824/focus=157993 (third
solution mentioned)
TODO:
* The interface remains to be set up. We cannot change this setting from LyX
for now.
* If save_transient_properties is false, we should read the user setting as a
per-user-per-document (session) setting (e.g. like the cursor position).
* Once the above is done, we can treat \justification the same way (but it would
be even better if \justification was moved to lyxrc).
The current behaviour of the \origin parameter replaces relative file names
with the absolute original names if a document has been moved even if the
files have been moved as well. This behaviour is annoying e.g. for editing the
LyX docs in a git checkout.
Now file names are only replaced if the referenced file sdo not exist.
Simplify the logic for language package selection and make it more consistent:
Use polyglossia with non-TeX fonts (system fonts/Unicode fonts) for all
export flavours (XeTeX, LuaTeX, DVI-LuaTeX), if the language package setting
is "auto" and there is no language not supported by Babel and no package
providing Babel.
This solves some Babel-related autotest cases and leads to some new failures
due to the polyglossia language nesting problem.
The lib/unicodesymbols part is based on work by Günter Milde:
Both, \r{A} and \AA (rsp. \r{a} and \aa) are equivalent standard LICR macros
for Aring/aring as well as the deprecated "angstrom sign" character (212B).
However, with \AA for 212B and \r{A} for 00C5, tex2lyx converts \AA to the
deprecated "angstrom sign" which is missing in many fonts including the
Unicode version of Latin Modern.
I added the normalize_c() calls so that tex2lyx prefers the precomposed forms
(these are better editable in LyX) and the deprecated flag.
The conversion is not completely correct yet, but adding the test before the
fix has the advantage that the fix can easily be documented by changing the
test reference.
whose children is also a child of another buffer, then try to close that
one.
The problem is that we do not check properly to make sure that the child
is not a child of some other buffer. Now we do.
whether a given child Buffer is also a child of some other parent.
Then do the releasing or resetting where this method is called.
There should be no change of behavior with this patch.
Improve the test whether cursor has moved in Cursor::posVisLeft. The code for posVisRight had already been fixed for #5764 at 0730c923, but this replaces both tests by the proper == operator.
Fixes bug #9913.
By initializing 'to' to a value, the code made it seem like that
value mattered. But the value is overwritten in getWord().
Further, now if 'to' is used before it is initialized, there might
be a useful compiler warning that could point to a bug.
Gcc STL debugging feature asserts when swapping an object with itself. This happens in some cases with math grids that have only one column.
A quick review of other uses of swap() in the code base did not reveal any other dubious case.
Fixes bug #9902.
At d449e7e6 it has been decided that submenus are going to be displayed even if
all their items are disabled. Here we make an exception for OptSubmenus.
Example of submenu no longer shown: Insert > Insert Regexp
Example of submenu always shown: Edit > Math > Limit Type, Macro Definition
\output_changes is now output at a distance from \tracking_changes.
Since both parameters can be seen as per-user preferences, they can cause
undesirable merge conflicts, in a multi-author setting, were it treated as a
single block by the version control system, as was the case before this patch.
After d5a5fbb8, as indicated in the commit log, it remained to make sure that
the sub-menus of the navigation menu showing the TOCs are generated in a delayed
fashion, to avoid corner cases regarding performance when documents have very
lengthy tocs (e.g. in a document with 1000 sections it takes a few hundreds
milliseconds for the menu to be refreshed). But this idea actually requires
substantial changes to the way menus are computed, so it is not for now.
In the meanwhile, I reintroduce a max size for menus, after which it is cut
off. This differs from the one that I removed at d5a5fbb8 in two ways: 1) if
there are more items than the max size, then we still show something instead of
nothing, 2) we allow ourselves to rely on qt's scrollable menus and therefore
allow bigger menus than before the above commit. The philosophy is that it is
better to show something than nothing, that it's better to show a scrollable
menu than to cut the menu to fit the screen, and that beyond a certain size the
scrollable menu becomes useless anyways.
It is a bad idea to have a QObject variable that oulives the main QApplication object. See for example:
https://www.ics.com/designpatterns/book/globals.html
Here the QTextLayout object was static to the anonymous namespace getTextLayout function, and got destroyed after the freetype renderer had been disposed of by QApplication.
This causes segmentation faults when quitting LyX on some systems.
This patch moves the cache together with other GuiFontMetrics caches. It means that one will have one such QTextLayout per font type, but this will not change much.
Preliminary work for addressing #7790. Thanks to Richard for providing initial
files this is based on.
Adding to TextClass:
OutlinerName <string> <string>
(the second string is translated)
e.g.:
OutlinerName thm "Definitions & Theorems"
Adding to Layout:
AddToToc <string> (default "", means no)
IsTocCaption <bool> (default 0)
e.g.:
AddToToc thm
IsTocCaption 1
Adding to InsetLayout:
AddToToc <string> (default "", means no)
IsTocCaption <bool> (default 0)
e.g.:
AddToToc literate
Adding to inset arguments:
IsTocCaption <bool> (default 0)
The active/inactive status of hfills was not checked in numberOfHFills.
The code is reorganized a bit, but the important part is the change in the above function.
Part of bug #9870.
This crude caching mecanism is useful in the particular case of a screen with many misspelling dotted lines. In this case, it is necessary to build a QTextLayout in order to know where to put the start/end of the spell line. Since rows typically contains text snippets longer than a word, we may be in a situation where the same QTextLayout is constructed repeatedly.
This commit is useful in this particular use case, and should not be costly in other cases. A better fix would be to remember the QTextLayout associated to each row element. This is a bit more work, so this fix should be sufficient for now.
Additionally, do not paint misspelled marks when painting is disabled.
Fixes bug #9890.
Although af8ba5e0fixed#9321, it broke a valid use case that was
reported by a user at #9785. Hopefully we can come up with a better
fix for #9321.
This reverts commit af8ba5e069.
exist. This will allow for a proper fix for bug #8796, though that may or may
not get fixed before 2.2.0.
Also, change the InStyle tag to ModifyStyle, per a suggestion of Jurgen's.
(http://mid.gmane.org/565E17DD.7090008@clear.net.nz)
Fix the pilcrow and the cross in the outliner for Windows and old Ubuntus.
The thin space after the cross is based on aesthetics (in Ubuntu at least) after
trying both with and without a normal space. A thin space is already used for
display in BiblioInfo.cpp, so I presume it is safe.
Ideally, I prefer ❌ (CROSS MARK), whose description fits the purpose, over ✖
(HEAVY MULTIPLICATION X), which looks too bold in the UI. Whereas ✕
(MULTIPLICATION X, successfully tested in Windows by Andrew) looks too dim. But
❌ (CROSS MARK) is next to ❎ (NEGATIVE SQUARED CROSS MARK) so it might be as
problematic as the latter.
Do not output the cross on the author name in the toc of tracked changes.
Previews are now generated when previews are turned on in
preferences. This change ensures that when users activate previews
for the first time, they are not confused by no previews showing up
(a restart of LyX or a triggering of each individual preview would
be required).
There was a previously attempted fix for #9507 at 390ae054 which was
reverted at 358745d0 for performance reasons: it updated previews
after every preference change and updating previews is costly (even
if the cache signals there are no changes needed).
This implementation is consistent with what we do for updating the
system fonts in preferences.
boost::regex supports escape sequences starting with a backslash in format
strings of regex_replace, but std::regex does not. Therefore format strings
involving literal backslashes have to be written differently for both flavours.
The special MSVC handling in regex.h is removed, since it is not needed
anymore, and using grep syntax would definitely be wrong.
The computation of the legth of expanded hfills did not take into account their unexpanded size. This is done now by increasing the dimension (+=) instead of merely setting it.
Moreover, since the insets sizes are integer number, rounding effects have to be taken in account. To this end, the extra number of pixels is added to the last hfill in the row.
This fixes part of bug #9860.
Note not everything is fixed by this patch: the logic of ParagraphMetrics::hfillExpansion seems bogus to me. I do not see why consecutive hfills at the beginning of a row should not be all expanded. Since I do not know what are the peculiarities of hfill handling in LaTeX, I did not change it (yet).
I did not either try to investigate the label hfill part, because I do not even know what is so special about it. I think there is a lot of old logic that nobody ever tried to question.
This is done by implementing contentAlignment() for this inset.
In order to display properly 'stretch' alignment, the code for TextMetrics::getAlign is rewritten to include some code that was in computeRowMetrics.
Back references in the format string of regex_replace use the syntax $n both
in std::regex and in boost::regex for the default format. Boost seems to
support the syntax \n in addition, but it is not documented at
http://www.boost.org/doc/libs/master/libs/regex/doc/html/boost_regex/format.html.
Therefore it is a good idea to use $n also for boost.
The changed code is not used, but I tried to use a similar approach for
boost::regex, and found some problems:
- regex_replace and regex_search are implemented in the replacement, so they
must not be used directly
- an smatch object must be given by reference (as in the called methods),
otherwise an exception would be thrown at runtime
- the commented out regex_replace version is actually needed
This code is supposed to be deleted, but nevertheless I wanted to record here
how it had to be modified if it was actually needed.
It was possible for errors that occured in the first run to be shown
in the error list after the second run. Now, the errors are cleared
before the second run.
Although I do not have a reproducible example at hand, I imagine
this situation would occur if a rerun is required and there is still
an error after the rerun.
Related to #9765.
Before, the exit code for the first LaTeX run was used to set the
flag, which caused an error to be reported when in fact there was no
error on the second run.
This fix ammends 1dbf0e5a.
When importing TeX code like
%comment
TEXT
the LyX document currently becomes
[ERT %comment] TEXT
so that TEXT is now part of the comment.
Now output_comment adds a trailing newline if the token after the
comment is not a newline. Note that the newline that marks the end of
the comment has already been parsed at this point.
tex2lyx tests have been checked manually and updated.
Fixes ticket #9551.
A plausible scenario is that change tracking is used together with a versioning
system. In this case, parallel modifications might remove an \author line on one
side, and add another change of this author on the other side. This scenario
causes a bad merge after which the added change has no associated author. In
this case, LyX used to display a list of errors on opening and deliberately
removed the corresponding change tracking information.
* If ever a tracked change refers to an author that does not exist, then add a
dummy author. This dummy author is not saved to the file afterwards.
* Have a very clear error message on opening such a corrupt file.
This is better because it implements a LRU cache. Indeed, while editing in particular, width of many different strings has to be computed. This is different from the previous situation where only width of single characters was computed and cached.
This popped up in cmake monolithic build once. It looks like BufferView is
included indirectly by some of the other headers (otherwise we would have seen
compile errors for other build configurations as well), bu I'll keep the
forward declaration since we don't want to depend on this indirect header
inclusion.
N_() is a preprocessor macro to mark translatable static strings. It is not a
good idea to also name a class member variable N_: It did only work in the
other build configurations because gettext.h was not included.
Updating all previews (even if only one has changed) is more costly
than I thought. Thanks to Guillaume for tracking down this
performance issue.
This reversion is related to the reversions at 358745d0 and
a7a14395. See also #7242 and #9855.
This reverts commit 29948eec26.
Updating all previews (even if only one has changed) is more costly
than I thought. Thanks to Guillaume for tracking down this
performance issue.
This reversion is related to the reversion at 358745d0.
See also #7242 and #9855.
This reverts commit 66f527e417.
Prevent encoding changes whenever the TeX engine is XeTeX or LuaTeX,
as XeTeX/LuaTeX use only one encoding per document:
* with useNonTeXFonts: "utf8plain",
* with XeTeX and TeX fonts: "ascii" (inputenc fails),
* with LuaTeX and TeX fonts: only one encoding accepted by luainputenc.
+1 no needless encoding switches
+1 runparams.encoding matches the correct encoding at any time
+1 less complicated code.
-1 there may still be problems with CJK (possibly impossible to
solve for Xe/LuaTeX with TeX fonts).
For LuaTeX & TeX fonts, the complete document uses the encoding
of the global document language.
See also #9740.
The referenced commit lead to performance issues and possibly
crashes in some cases when saving preferences. Thanks to Guillaume
for discovering the issues. See #9828 for more discussion.
I hope to come up with a better fix for #9507.
This reverts commit 390ae05444.
LyX format, create a backup of the original file. We put it in the backup
directory, if one exists, otherwise in the directory the original file is
in. This is the same strategy as for normal backups. Basically, the only
diferences are: (i) what name we use and (ii) we do not over-write any
backups that may already exist.
Actually, the changed tests were used to prevent overwriting the encoding
changed in Buffer::writeLaTeX with a language-default encoding.
This is still required for XeTeX with TeX-fonts unless a proper solution is found.
Documents with more than one encoding and TeX-fonts fail with LuaTeX,
as "luainputenc" can only handle one encoding.
With inputenc == "auto" or "default", the encoding changes with
the language and must be reset after an eventual language switch in insets
or environments (see #6216).
However, whether we need to do this does not depend on 8-bit TeX vs. LuaTeX
but on the possible use of more than one encoding for the document.
With "nonTeXFonts", the encoding is utf8,
LuaTeX with TeX fonts requires encoding handling similar to 8-bit TeX.
(Additionally, the value of "params.inputenc" could be tested: if it is
not "auto" or "default", we have just one common encoding and could skip
the reset as well.) Not sure how much time this saves, though.
This is one part of bug 9744: If you toggle between TeX fonts and non-TeX
fonts, the settings of the other choice are no longer thrown away, but stored
and re-activated if you switch back. Most parts of the patch are purely
mechanical (duplicating some BufferParams members), the only non-mechanical
change is in the GUI logic.
and record an undo call. This deals with the problem of marking
the Buffer dirty, as well.
Move LFUN_BUFFER_TOGGLE_COMPRESSION and LFUN_BUFFER_TOGGLE_OUTPUT_SYNC
to Buffer.cpp, and add an undo call.
In computeRowMetrics, the right margin of the row shall be taken in account when the text is not left-aligned. Rewrite the code in terms of the available width `w' to avoid this pitfall.
The pointer macroInset points to a vector element. When another element is inserted in this vector, some reallocation occur and the pointer points to a deleted element.
This does not crash LyX by default, but it is bad enough to make valgrind cry.
See ticket #9804.
There was a problem with end of paragraph markers. By design, wide insets choose their size without taking in account the marker. This should not lead to unneeded horizontal scrolling.
Part of ticket #9807.
PDF properties (Author, Title...) need to be quoted properly when writing (normal operation and tex2lyx). Also, reading them requires to use Lexer::getString() directly, because >> uses next(), which does not handle escapes.
Fixes bug #9830.
hyperref expects LICR macros for non-ASCII chars in the PDF Header Information.
As hyperref provides good coverage for \inputencoding{utf8}, we try
this if the current input encoding does not support a character.
With XeTeX, we do not load inputenc and cannot use \inputencoding.
However, utf-8 works out of the box so we can write the content in UTF8.
The \jobname macro is redefined for the preview snippets such that
it contains the name of the document without extension. This is
harmless because the moment it is redefined, TeX has already chosen
the name of the output and log files. On the other hand, any use
of \jobname in preview snippets is now consistent with what one
obtains after exporting and compiling by hand.
Other than BIBINPUTS, also BSTINPUTS and TEXFONTS are exported.
They do not replicate the setting for TEXINPUTS but are set such
that the current dir (i.e., the temp dir) and the document dir
are also searched for bibtex and fonts related files.
The code in InsetTabular disables the toolbar icons and menu entries related to vertical lines.
The code in GuiTabular disables vertical lines in the Settings dialog.
Note that there was a bug in
GuiSetBorders::set(Left|Right|Top|Bottom)Enabled, where the borders
did not get drawn correctly.
Fixes bug #9816
Rewrite the logic completely:
* fix cases where the offset was reset unnecessarily
* fix cases where the row was scrolled too much: as soon as a side of the row is completely visible, there is no need to scroll more.
* fix cases where offset would never reset
This partially reverts commit 0f1fdaaa9, but only redraws the current
row when the value returns by getPos is obviously false. It would also
be possible to check whether the current cursor has all its insets in
cache instead.
A better fix should be found, but this is unfortunately not 2.2 stuff.
Fixes bugs #9796 and #9812.
The execution took some time and the messages were delayed
until all test files were processed. Now as each testfile
is processed, the appropriate messages are printed.
There is also a new target: cleanupdatetex2lyxtests
It is the same as updatetex2lyxtests, but removes also
some extra created files from the source directory.
Cmake versions prior to 2.8.11 don't know this command, but
our minimal requirenment is 2.6.4
Thank to Vincent, it is replaced by using 'if(file1 IS_NEWER_THAN file2)' comparision.
Sometimes when compilation fails a PDF file is created but is empty
and the viewer gives an error when trying to view it. One such
example is compiling the current lib/examples/PDF-comment.lyx file
with TeX fonts and the following version of LuaTeX:
beta-0.80.0 (TeX Live 2015) (rev 5238)
The wordSpacing property of a QFont object applies only once when there are multiple spaces between words. Therefore Row::Element::countSeparators shall not count spaces, but groups of spaces.
Fixes bug #9808.
This is a tiny simplification that makes understanding the code more easy and
will help in fixing the remaining regressions. The logic remains the same, no
export test result is changed.
Starting with Qt 5 the modifiers aren't reported correctly for disabled swap.
Until this is fixed it is corrected by reverting the modifier mask to check for.
The horizontal alignment changes caused a regression for documents in older
formats. This could have been fixed by adding the following lines to the
format entry for 489 in development/FORMAT:
Previously, the horizontal position was ignored except for the
following parameter combinations:
- fixed width and type Boxed and without inner box
- fixed width and any type and with inner box and with makebox
Now, it is also used for the parameter combination below:
- makebox is not used and not (type Boxed and without inner box)
and a corresponding conversion to convert_BoxFeatures() in
lib/lyx2lyx/lyx_2_2.py. However, it was decided to revert the box alignment
changes instead: The box alignment can contradict the paragraph alignment. A
better way to avoid the additional space that can be created by paragraph
alignment (which was the motivation for implementing box alignment) is the
same as for table cells (see noTrivlistCentering() in src/Paragraph.cpp).
This would be a file format change and it is too late now for 2.2.0.
See http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg188147.html for the
complete discussion (subject "Regression in lyx2lyx box alignment").
Fixes output for 3 of the 4 test lyx-files.
Includes "FIXME"s at places where further action is required to get the XeTeX
export right but I don't know how.
Remove member disp_ that is defined both in Cursor and CursorData classes
Pass parameter of convert<T>(docstring const) templates as const reference for performance.
b1c68dccf8 and 46aed6d2b9 fixed some language nesting issues, but introduced
a regression for the case that there is a standard paragraph in a foreign
language, followed by a list (e.g. itemize) in the same language, followed
by the end of the document, as e.g. in lib/doc/de/Additional.lyx. The reason
for this was that not all language ending commands did reset
state->open_polyglossia_lang_ correctly.
I am sure that one can still construct broken corner cases, and I am also sure
that this was already possible before b1c68dccf8 and 46aed6d2b9. However,
this fix seems to fix the most important issues, and to get nesting completely
correct we would probably need some stack-like structure, for languages and
encodings, also for the CJK part (which is not touched at all by this commit).
The correct mappings break the tex2lyx roundtrip tests because both,
the tests and tex2lyx use the wrong mapping (\b for "combining minus below").
Fix tex2lyx and the test files so that round-trip tests pass again.
The culprit was that the computation of textwidth did not take wordspacing in account.
Also fictor the code so that the pixmap path can use the special RTL handling.
It is not clear however that the handling of left and right bearing works correctly.
We already have a CoordCache of insets dimensions. It is not necessary
to store the same information in two places.
Give a name to CoordCache tables types to improve code readability.
Remove ParagraphMetrics::singleWidth, which is not used anymore.
Please use the new function otexstream.append(str, texrow) to append an
odocstringstream with texrow information to the output when outputing to a
string buffer (e.g. case of subcaptions).
This deep copy used to mess with the unique identifier: what TexRow saw was
different from the original uid. There may also be performance improvements.
(Using Georg's suggestion)
These features are active in DEVEL_VERSION when Debug is set to LATEX.
1. The TexRow information is prepended to the source panel.
2. Clicking on any line in the source triggers reverse search. (This would be an
interesting feature to implement on the user side, but we need a proper LFUN.)
WriteStream is now built from an otexstream instead of an odocstream, and
therefore counts lines in a TexRow. Calls to TexRow are added in relevant places
in math insets.
This finishes adding line tracking for math in the source panel and for forward
search.
This is preliminary work for extending the cursor<->row tracking to math.
TexRow used to associate, to each row, a location id/pos where id determines a
paragraph and pos the position in the paragraph.
TexRow now associates to each row a list of entries, text or math. A math is a
pair uid/idx where uid will determine a math inset and idx is the number of the
cell.
The analogy id/pos<->inset/idx works better than the analogy id/pos<->idx/pos,
because what matters for the TexRow algorithm(TM) is the behaviour in terms of
line breaks.
This only improves the source view and the forward search, not the error report
and the reverse search (though this could be easily added now).
The id is just the memory address.
The status bar now spits out the math inset uid information when in a math cell
in DEVEL_VERSION, like it already does when in a paragraph.
This is preliminary work for extending the cursor<->row tracking to math.
otexstream used to count lines to build a TexRow, and some other things. The new
class otexrowstream has the line counting feature of the previous otexstream
without other stuff. otexstream is now a subclass of otexrowstream that has the
same features as before.
This is preliminary work for extending the cursor<->row tracking to math.
The code that sets open_polyglossia_lang_ is not only executed for polyglossia,
but also for babel, so we have to use the correct language end command.
The context menu did no longer work for some insets, since it requires the
cursor to be in front, and editXY() is also used to determine the inset for
the context menu. Now the cursor is corrected if needed.
This was made visible by aab1b145a5, since xhtml export for
lib/doc/Additional.lyx caused an exception. However, the cause for this was
already present earlier: All attempts to output a std::string to an
odocstream resulted in trying to change the encoding of the stream instead,
since there is no operator<<(odocstream &, std::string) defined, and an
implicit conversion to SetEnc happened instead.
This is fixed by making the SetEnc constructor explicit and adjusting all
code parts that did not compile anymore after that. The parts of the code
that did use the wrong output operator were the std::string version of
htmlize() from output_xhtml.cpp and all changed parts in the other .cpp files.
I also removed the std::string versions of html::htmlize() and
html::cleanAttr(), since it was difficult to see which encodings were used
with these. Now we are always explcit when using html::cleanAttr() and
html::htmlize().
Previously, if one clicked onto a large non-editable inset like the new LyX
logo inset, the cursor was always positioned in front of the inset, even if
the click was almost at the back edge. Now the cursor is positioned at the
correct edge. I tested this also with RTL contents, where from means right
and back means left, but the inset anchor position anchor point is still
at the left, and the right edge is dim.wid pixels to the right of it.
The rule-of-three says that if any of virtual destructor, copy constructor
or assignment operator needs to be manually implemented, then all three
should be implemented. Otherwise you can get subtle bugs which can be
difficult to find. In the changed classes, changing a copy-construction to
an assignment would have had surprising effects. Now they all behave
consistently.
Found by cppcheck: (style) Same expression on both sides of '&&'.
I deduced the correct if-condition from the other places where theLaTeXFonts()
is called.
These were found by cppcheck:
Member variable 'x' is not initialized in the constructor.
The crash #9788 would not have happened if this had been done earlier.
The test case did show several problems:
- The alignment argument was not parsed correctly if it was not in braces
- There one column too much created, since I did not take into account that
the current cell must bge replaced by the multicolumn cell
- If the last line of an array contained only an empty multicolumn cell, then
the complete multicolumn was swallowed
- The decision whether to output the column separator & was sometimes wrong
for multicolumns
This fixes the crash of bug #9788. However, the misparsing of \multicolumn
is still there: LyX thinks that the array has three columns, it inserts an
additional one before the multicolumn.
This was a regression from 2.1.x. I failed to copy the horrible hack that was present for the special case of () in Hebrew.
There is a real need for someone who understands RTL language stuff to fix this. Currently () are wrong in .lyx files IMO. We should not have to swap them for display.
This removes the old implementation of Cursor::getSurroundingPos, that has been superceded in commit .
As this was the last user of the Bidi class, this can be removed too.
Use the function support:truncateWithEllipsis() to shorten a docstring with
... at the end. Actually we use U+2026 HORIZONTAL ELLIPSIS instead of "..." when
automatically shortening strings. This is to be consistent with Qt's own
truncation and is much nicer on the screen.
This includes the bugs #9575 and #9572 regarding broken text elision in the
outliner.
Known issues (non-regressions):
* TocBackend::updateItem() should be rewritten to update all TOCs. (#8386)
* "..." should be replaced with … everywhere else on the interface (including
translation strings).
* We should prefer to rely on QFontMetrics::elidedText() to truncate strings
with an ellipsis whenever possible, or an equivalent for the buffer view
dependent on the font metrics. See the warning in src/support/lstrings.h.
* TexRow now computes rows from a DocIterator. In practice, the cursor
highlighting is now correct inside insets, it is no longer restricted to the
topmost level. It certainly also makes forward-search more precise.
* Added the option to disable a texrow when not needed, for perf.
* Fixed a bug where the last paragraph was not properly highlighted.
Limitations:
* TexRow still does not handle: math (e.g. multi-cell), sub-captions, inset
arguments.
* New TOC "math-macro". This means that math macros can now be accessed in the
outline pane in their order of appearance or in alphabetical order, and can be
searched using the filter.
* Lists of floats now show subfloats deeper in the navigation menu
* The arbitrary 30 element cut-off after which nothing is shown except "Open
Navigator..." is removed. Menus now have no limit in size, so Qt may display
them scrollable. In exchange, we always show "Open outliner..." at the
beginning. I tested for performance issues with a rather complex document and
it is fine; but this does not exclude corner cases with lots of TOC entries of
a certain kind. If necessary, populating the navigation sub-menu should be
delayed like the main menu.
* Elements that do not contribute to the output (e.g. in a note, a disabled
branch) are now preceded with a symbol indicating this status. (The machinery
was already there; I wonder why it was not implemented already.) I have chosen
U+274E NEGATIVE SQUARED CROSS MARK.
* Fix the contextual menus in the outliner (bug introduced at 94e992c5).
* Toc item now move to the caption when present, but first center on the float,
to prevent the situation where the caption is at the top of the screen and the
contents of the float is off-screen above the caption.
(Internally, the action of the toc items can now be customised)
* Fix the LyXHTML output. Disabled captions no longer appear in the list of
figures.
Remove unwanted clearSelection()s in MathData::updateMacros(). These calls broke
text selection with keyboard and mouse, search-and-replace, restoring selection
after Undo, etc. in a document with math macros since 1.6.0. (Regression at
6aa54673 and 12314897)
I do not know the purpose of these calls, but the selection code has been worked
on since, and I cannot produce undesired behaviour after removing
them.
New method TextMetrics::findRowElement, excerpted from CursorX.
Reimplement getSurroundingPos using Row information. This is easy when
the cursor is inside a row element. At row element edges, different
situations can occur; hopefully all these situations are taken into
account.
Rename the old getSurroundingPos to getSurroundingPosOrig and
transform getSurroundingPos into a wrapper that compares the two
methods. This will be removed when we are confident that the new
function is equivalent to the old one.
It will then be possible to remove also the Bidi class (at last!).
There are still a few warnings of the kind
(style) Variable 'x' is assigned a value that is never used.
since I did not touch code where I was not sure whether there might be a real
bug, and I kept some for symmetry reasons as well.
This fixes cppcheck warnings (style) 'class x' does not have a copy constructor
which is recommended since the class contains a pointer to allocated memory.
These were all flagged by "(style) The scope of the variable 'x' can be reduced."
Narowing the scope improves readability, and if it is in a loop then the
compiler will be clever enough to produce efficient code, we do not need
manual optimization for POD types.
As Günter found out running the tex2lyx tests overwrites the test references
if the build directory is identical to the source directory. Therefore the
tests would always pass, but git diff would show a non-empty diff if the tests
should have failed. Since it is better anyway to build in a separate directory
we simply do not support srcdir = builddir for the tests and abort with an
error.
This generalises the new use of TocBuilder (97e8101) to listings and wraps and
removes some duplicate code.
Make sure that we will never write an empty float type again in the future
(#9760)
We introduce TocBuilder for building TOCs that take into account both float
insets and their captions.
* Floats without caption are shown with their content.
* Floats with a caption are shown with their caption, but clicking the entry now
correctly moves to the float and not to the caption.
* Subsequent captions produce additional entries in the TOC.
* Figures and subfigures are correctly ordered in the outliner.
* New TOC "senseless" for captions appearing alone (a bit like broken references
are still displayed in the menu and outliner).
* Disable LFUN_CAPTION_INSERT if there is already a caption in a listing
Known issues:
* Inconsistent output for includes located inside floats
* We should record the end of the float in addition of the beginning for a more
accurate cursor -> outliner entry conversion
(#9762)
* fixes a bug where this was already the expected behaviour of
math-subscript and math-superscript but failed.
* corrects the behaviour where if there is \newcommand in the
selection, then a corresponding macro template is introduced
instead of a math inset.
* fixes a bug where math-display, math-subscript and math-supscript
would also introduce such a macro template in a way unrelated to
their function. Now it only happens with math-mode without
arguments.
* fixes a bug where a text that does not denote a macro definition,
e.g. "aaa\newcommandaaa", would produce \invalidmacro.
These were all found by cppcheck. Even in constructors that are there "only
because of std containers" the class should be initialized correctly. You can
never know whether such an object does not get used, and then a nice crash
caused by dereferencing a NULL-pointer is better than undefined behaviour.
The old code produced crashes with gcc5 caused by calling the copy
constructor (see https://bugzilla.redhat.com/show_bug.cgi?id=1260976).
This has been filed as gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67557
It is currently being marked as invalid (they claim the code is not valid and
produces undefined behaviour), but I don't think that this is correct.
Fortunately i does not matter for us whether the old code was valid or not,
since the new version is easier to understand and works with all compilers.
Base classes with virtual methods should have a virtual destructor.
See Scott Meyers, Effective C++ item 7: Declare destructors virtual in
polymorphic base classes.
Fix bugs #6501 and #7359.
* Selection highlighting has been broken since a conflict with
reverse-search was repaired (at 00a62b7c), is now fixed.
* The selection highlighting was not accurate, for LaTeX formats (in
full source view), and meaningless, for non LaTeX formats.
* fix regression at cc00b9aa: force_getcontent_ was always true
therefore the code to detect changes in the generated source was
dead. The consequence is that the source view would jump to the
beginning at each updateView() even if no change occurred. Cc00b9aa
was meant to fix#5600, which I cannot reproduce with the new
implementation.
* Various improvements:
* When the position-to-line conversion is unavailable (LyXHTML, LyX
source, etc.) we focus on the first difference instead.
* Get some space around the cursor
* Respect the scrollbars
* Highlight with QTextEdit::ExtraSelections instead of cursor
selection (the latter used to break syntax highlighting of the
TeX code... which was not so much of an issue before because the
wrong part was selected)
Known issues:
* The highlighting is off by one line in very last paragraph of a
document. This appears to be a bug in TexRow.cpp.
* The highlighting is off for any kind of inset. This could be
solved by adapting TexRow so that it accepts CursorSlices as
and argument for the conversion to line number. (this is bug
#4725)
Fix bug #9493. The source panel was very slow with auto-update on. Now
we use a timer that ensures that the source is generated only at
rest. The delay is short or long depending on whether we show the
source of a paragraph or the whole source.
In order to adjust the path of an included file, when deciding
whether the document was moved or not, it is not sufficient
comparing the paths because the document could have been accessed
through a symbolic link.
This was a regression of 0c093a6264. The crash was found by the tex2lyx
test case test-insets.tex: Running lyx -f main -e pdflatex test-insets.lyx.lyx
did crash. This is not a real fix, but will do for now since previews are not
needed in command line mode (I wonder why they are generated at all?) In the
long term, we need theApp() to return a console application in commandline
mode to eliminate the existing sifferences between export from GUI and
commandline.
* Omit commented-out lines
* Properly escape backslash
* Do not allow non-space chars after delaration
* Allow blanks before # comment character
Fixes: #9746
Greek and Times under MikTeX with auto-install may fail due to a half-installed
font package. However, the workaround in LyX stands in the way of
alternative approaches (see bug #6469).
This function inserts a COMBINING GREEK PERISPOMENI character that is
normalized to pre-composed characters for base characters where a
corresponding WITH PERISPOMENI character exists.
This is a partial solution for Ticket #6463.
