The purpose of this branch is to improve the spacing in math equations
* do not use hardcoded pixel values, but math units that depend on
zoom and dpi. This should be good for HiDPI systems.
* implement as much as possible the math typesetting algorithm
described in Appendix G of the TeXbook.
One typical example of the spacing algorithm is that ``-a'' has no
spacing, contrary to ``a + b''. This reflects the unitary/binary
minus that will indeed happen in typeset output.
Together with the better character substitution that has already been
implemented by Guillaume, we get a nice improvement of mathed looks.
What makes this code complicated is that it handles macros properly:
the spacing inside the macro will depend on the values of the
arguments and the elements that are before and after the macro.
As a result, many definitions in lib/symbols are now just copy/pasted
from the relevant sty file. In particular, it is now possible to make
use of \mathrel, \mathbin, etc. macros to specify spacing.
This merge is a starting point. Remaining work includes
* proper handling of sub/superscript nucleus and of font-changing
insets (as is done in the TeX algorithm).
* proper typesetting of fractions
Thanks to Guillaume for extensive testing.
Try as far as possible to use the same definitions as in the LaTeX files.
An example of that is the definition and subsequent use of \joinrel,
\relbar and \Relbar.
This is mostly Guillaume's work.
Test unicodesymbols for most supported input encodings with Kornel's addition to ctests.
Add required "forces" to unicodesymbols:
* utf8x does not support all characters supported by LyX
* several 8-bit encodings map characters to math-mode commands - force replacement in text-mode so that LyX can wrap them in \\ensuremath.
Fix a misalignment (wrong replacements) in the Cyrillic Unicode block.
Use \\mathscr for Mathematical Script characters in Mathematical Alphanumeric Characters (in line with the characters in other unicode blocks.
* set up a replacement of *, -, and : by the adequate symbols (#9893)
* fix the wrong character selection and operator spacing in \text mode
* hide some internal symbols from the auto-completion.
* Fix spacing in lib/symbols after recent commits about math spacing, as well as
older spacing issues (e.g. \Join).
* InsetMathKern now uses the same em value as other math length commands.
What is nice is that the kerning amount now matches the ones found in the
packages definition (modulo 10mu that lyx currently adds between relations).
Testcase: $\CheckedBox\LEFTcircle\RIGHTcircle\photon\gluon\vcentcolon\dblcolon\Coloneqq\eqcolon\models\hookrightarrow\bowtie\hookleftarrow\Join\APLinv\neq$
First run of Kornels patch for tests with all input encodings in lib/encodings.
Remove redundant sample files - keep only one sample and change the input encoding in the test script.
Put remaining failing test in "unreliableTests" for later sorting...
1. We must always output all (diverging) options, including
default options; if not, default options might get overwritten.
2. Do not output options in \setotherlanguage, since we might have
multiple "other languages" varieties from the same language (such
as naustrian, nswissgerman). And the options are output for the
language switches anyway.
Hence, LaTeXFeatures::getPolyglossiaLanguages() does not have to record
varieties. This was not done correctly anyway, since the map allowed
for one entry per language only.
- fileformat change
- I could not update the tex2lyx test files because of bug #10440
- maybe the lyx2lyx routine could be improved but since a document can also begin with another layout than "Standard" I could not use the lyx2lyx function put_cmd_in_ert
Do not use REVERSE SOLIDUS OPERATOR for backwards conversion of
\\\\textbackslash in LyX and tex2lyx.
Both, \\\\ (005C REVERSE SOLIDUS = backslash) and 0x29f5 map to
\\\\textbackslash but 005c is the preferred back-transformation.
Otherwise, using \\\\ in "mathematical text" leads to literal 0x29f5 in the LyX
source which leads to "missing character" errors with non-TeX fonts.
Ideally, we would use a proper counter here, but this seems to be
impossible with the current counter mechanism.
What we would need is a counter that is incremented when either of the
layouts is used. Currently, the counter seems to be stepped only inside
one layout.
The current fix is a candidate for stable.
Note that the lyxrc.document_path variable corresponds to what we
call the "Working directory" in the GUI preferences dialog.
Setting document_path to "." makes it so when LyX is started from a
directory, that directory is the default path for many of LyX's
operations, such as the following:
- new file, new from template
- adding a custom BibTeX file
- GUI compare dialog
- local layout button in document settings
- external material file browser
- graphics browser, include browser
The best guess for where the user wants to save or find files is the
directory the user started LyX from. Before, the default was always
the home directory. If desired, the old behavior can be restored by
changing the default path in Preferences > "Working directory".
This commit takes advantage of 9b64d7bd, which allows the use of a
relative path for path preferences.
* custom non-tex fonts with all required characters
* use 2.2 fileformat (easier backporting)
* test all export formats
Also, fix pattern for "mixing_inTitle_layouts" in unreliableTests.
force=utf8 is required for most characters provided by add-on packgages
and (almost) all mathematical characters, because these are not
set up for inputencs utf8
unicodesymbols.py failed here (python 2.7 under Linux) before the simple fix
included in this commit.
Based on Daniel Groger's work of five years ago, with minor changes
http://www.mail-archive.com/lyx-devel%40lists.lyx.org/msg169820.html
This extends the support for Xfig LaTeX + PDF to a more modern and
actively developed vector graphics editor. Embedded Objects manual
updated, also to include a workaround for an Inkscape 0.91 bug.
Specify non-TeX fonts that work in the source for documents that
fail with "missing characters" if compiling with "non-TeX fonts"=true.
(This does not interfere with the default output in any way.)
THe pdf output showed a very visible line overfull. I slightly changed the text to
avoid this without adding an hyphenation point, not appropriate in documents for beginners.
Use LyX note instead of comment. This is less invasive that
converting Beamer frames to fragile to accommodate the comment
environment.
(cherry picked from commit e81f6b04bc)
The title is changed to "LaTeX (pdflatex) Preview", etc. depending on the
format. The actual default format is computed.
The menu name "Source Pane" is replaced by "Code Preview Pane" to better reflect
its purpose.
Consider biblatex's new field names: location (address),
journaltitle (journal), institution (school).
Biblatex provides alias for the legacy bibtex field names. Hence check
for the new names only if the legacy names are not used.
The compilation did not succeed before because of an é in an ERT
inset. This is changed to \'{e}.
Also correct spelling of "decouvert" to "découvert".
Alternatives would be to use a LyX note or a comment inset. Since
the original version uses ERT, I do not change that.
This commit fixes the following ctest:
export/examples/fr/beamer-article_pdf4_texF
It likely also fixes the corresponding test for fr/beamer.lyx, but
since the default output format is set to pdf2 we do not run the
test.
For more information, see:
https://www.mail-archive.com/search?l=mid&q=20160919192413.ftnz4gk6dl5w3k5c%40Opti1604
(cherry picked from commit 9f3518bcd2)
sidecap does not work well for some reason with the Japanese doc, so
the sidecap bool is set to false to restore compilation.
The following test now passes:
export/doc/ja/EmbeddedObjects_pdf3
Fix problems revealed by hand-compiling an examining the test samples in autotests/export/Unicode-characters/:
* new definitions
* fixed definitions
* "force=utf8" when required
* some IPA symbols fail without the "extraipa" package
* fix direction of "textcommaaboveright"
Please fix at first the versions in branch since this is the working copy delivered with LyX.
Also please keep the fileformat unless you need to document a new feature that requires a new fileformat.
This led to errors when compiling with polyglossia (and non-TeX fonts).
A minimal (currently non-compiling) test sample is kept in autotests/export/
and inverted in suspiciousTests.
We do already have docx, but xlsx was missing. This is a separate format
because of the MIME type. nd because some users might need converters which
can only handle one format. Now the spreadsheet template does not hide the
fact anymore that it can deal with xlsx files as well.
This change fixes the export of our FeynmanDiagrams.lyx example
files on the latest TeX Live 2016.
The IJMP(C|D).lyx examples compiled before the change but might as
well convert these instances of '\rm' also.
The changes were made with the help of the following command:
find ./ -iregex .*lyx -exec sed -i 's/\\rm /\\textrm /g' {} \;
and the resulting diff was confirmed manually.
This commit is consistent with 3cecd4d3.
There are still many math symbols in lib/symbols that lack a corresponding
entry in lib/unicodesymbols, although a clear mapping exists. This commit
adds some of them (not all yet). In the future we should probably move the
information from both files into one database.
The XHTML entries were added in the wrong field, if they are given we need
extra xhtml requires. The order is inconsistent, there are discussions on the
list about that but for now I'll use the existing order to fix the export tests.
The format of the lib/symbols file does not support "" for empty strings.
One would have to use x for fields that are not set (this is a hack), but
actually we know how to fill the extra field.
By moving date and author above the standard layouts, author is now
output in the PDF and the terminal error from LyX about mixing an
InTitle layout with non-InTitle layouts is gone.
After the fix at fe06ef0e, several converter chains to DVI
(dviluatex) were broken because they had previously gone through an
incorrect link in the chain.
This commit adds converters for the above formats to dviluatex and
fixes the following ctests:
export/examples/Literate_dvi3_texF
export/examples/Literate_dvi3_systemF
export/examples/knitr_dvi3_texF
export/examples/knitr_dvi3_systemF
export/examples/lilypond_dvi3_texF
export/examples/lilypond_dvi3_systemF
export/examples/noweb2lyx_dvi3_texF
export/examples/noweb2lyx_dvi3_systemF
export/examples/sweave_dvi3_texF
export/examples/sweave_dvi3_systemF
export/templates/RJournal_dvi3_texF
File format change. On format reversion, we need to put some extra code
in the local layout that emulates the 2.3 behavior.
Simply Input'ing the respective layouts is unfortunately not enough,
due to the insertion order.
See #9977
On Linux and Mac OS, this action brings the LyX window into focus.
Such behavior is not allowed by Windows OS so instead the color of
the taskbar entry is changed to indicate that the window has changed
in some way.
The action is hidden in the shortcuts menu because it would make
sense to assign a shortcut to it. The only way to execute shortcut
would be if the LyX window is already activated.
lyx-activate will be used (see next commit) to allow the PDF viewer
to switch to LyX after executing a reverse search.
This commit documents the feature introduced at 4803c769, which
fixed#10288.
The User Guide already has a section on closing tabs, so this fits
in well.
The default for ZOOM_OUT is -20 from a user perspective. That is,
the following are equivalent:
buffer-zoom-out -20
buffer-zoom-out
The reason for this is that the argument to ZOOM_OUT is treated the
exact same way as ZOOM_IN. The only way they differ is how the
default case is handled.
This commit also clarifies that (1) the argument may be positive or
negative and that (2) the argument is interpreted as percentage
points, not percent.
Add get_bool_value to parser_tools to be used in other places.
Make the upgrade convertion seamless from lyx writing the file (regarding
microtypes, there are still other dragons to chase. :-)
The keytests were previously enabled by default if the necessary
dependencies were found. They require a GUI and mouse so can
sometimes be annoying. Further, they are not currently reliable.
They are thus now disabled by default.
is output when a branch is NOT activated. Fixes bug #7698.
At the moment, inversion is controlled through the branch settings
dialog. There is no provision for inserting inverted insets directly,
or for changing them from the context menu. Both of these could be
done, of course. The latter would need LFUN_BRANCH_TOGGLE_INVERTED.
Although this a problem that only manifests itself on windows the change is general
and it works anywhere.
The major change is to change the file redirection > to -o the specifies the output file.
At the same time it makes the call to lyx2lyx less cryptic, e.g. to revert to the 1.3
format we have:
\converter lyx lyx13x "python -tt $$s/lyx2lyx/lyx2lyx -t 221 $$i > $$o" ""
now instead of
python -tt $$s/lyx2lyx/lyx2lyx -t 221 $$i > $$o
we use a call where the version to revert is explicit
python -tt $$s/lyx2lyx/lyx2lyx -V 1.3 -o $$o $$i
or we could write a longer, but more understandable form:
python -tt $$s/lyx2lyx/lyx2lyx --final_version 1.3 --output $$o $$i
FWIW I shuffled the order of the arguments just for the sake of readability,
to let $$i be the last argument.
These are all in lib/symbols, but we did not yet know the corresponding unicode
numbers. unicodesymbols does still not contain all symbols from lib/symbols.
The parser that reads unicodesymbols uses backslashes to escape quotes, so
every backslash that is part of a LaTeX command needs to be escaped as well.
There are more candidates in the greek and cyrillic sections, but I don't
know those commands, so I did not touch them.
\it and the other oldfont commands are deprecated and the new forms
(e.g. \mathit) should be used instead. The old forms can lead to a
warning in TeX Live 2015 and an error in TeX Live 2016.
Note that with this commit only affects completion, so LyX still
supports displaying e.g. \it in math if the user enters it without
completion.
This is consistent with 24d01111.
Thanks to Guillaume for the patch.
The external templates requested conversion to these formats, but there was no
converter defined, so plain text export did fail, and there are no obvious ways
to create plain text representations for the files used by these templates.
Now we output the file name as for other templates and also the graphics inset.
This fixes bug #7135.
On TeX Live 2016, Math.lyx gives an error when compiling with
pdflatex. On TeX Live 2015, Math.lyx compiles but the log gives the
following warning:
Usage of deprecated font command `\it'!
This commit amends 67e45aa3.
Provides two new styles:
1. An "In Premable" style that puts whatever is entered into it into the preamble.
This can be used, if one wishes, to include preamble code in the body of the
LyX document.
2. An "In Title" style that will put its contents into the body of the LaTeX
document, but before \maketitle is issued. This is useful for making branches
and notes in title-related material. (If you put these in a Standard layout,
this signals to LyX to output \maketitle, which may then come too early.)
Due to the ForceLocal machinery, no format change is needed.
The external date inset was implemented as a demonstrator for external insets
in general. It was never intended for production code. Now that we have several
external insets defined we do not need the demonstrator anymore. This fixes
bugs #4398 and #9948.
Previously the commandline arguments were processed in an operating system
dependent encoding if running under python 2. Now they are converted to
unicode during the parsing, using the more modern argpase instead of optparse.
The individual conversion methods do no longer need to know anything about
commandline encoding. This fixes a bug similar to #10218 if running under
python 2 which I probably introduced during the python 3 conversion.
The LyX class works now with python 3. Certain file format conversions may
still fail (convert_multiencoding() is a hot candidate), but this will need
to be fixed in the individual modules.
LyX did not distinguish compressed and uncompressed svg files previously.
Therefore XHTML export of vector graphics did use svgz images directly, which
is not supported by browsers. If svg and svgz are treated as two formats then
all works fine. This is also consistent with the loadable image formats
reported by qt: It reports both svg and svgz.
The gunzip dependency in converters is not new (it is already used internally),
but the gzip dependency is new, so it might not be available on windows.
This is not important at the moment, since we do not yet need to convert svg
to svgz, I only added the converter for completeness.
Although the fix affects only a content of a LyX note, it is
still surprising to get a dialog-window demanding creation
a new document if trying to edit the subdocument.
Now that 5mu are added on each side of : (because it is a relation), there is no need to do the same in the definition of \vcentcolon.
This is closer to what is done in mathtools.sty.
Inset-icons are auto-scaled according to their width.
This is problematic, if converted from SVG
with the bounding box set to content (ignoring the page size)
and the content is not square.
OTOH, ignoring page size is done for good reasons - we usually want just
the drawing area when inserting an image into a document.
An invisible square with fixes this problem.
Some icons had spurious invisible elements outside the page -- leading
to too small results in the PDF. These were removed.
(#8738)
For efficiency, we add a new flag to the buffer indicating when changes are
present. This flag is updated at each buffer update, and also when explicitly
requested via a dispatch result flag.
The old text was incorrect and came from the 2.0 release. LyX works fine if
the default python interpreter is python 3, as long as python 2 is available
as well.
Building LyX does also work with python 3, but since I did not check all
special build steps with both cmake and autotools, I kept a note about
possible problems.
The aim of the tutorial is to explain how to use LyX and not special LaTeX issues with \frontmatter, non-TeX fonts etc. Therefore the preamble should kept clean.
We ensure that configure.py is called by python2, regardless whether 'python'
is python 2 or 3. Therefore we can simply call TeXFiles.py with the currently
running interpreter. This fixes configuration on systems where 'python' is
python 3.
The difference has been validated with diffpdf.
The following could not be tested and were left unchanged:
docbook_article.lyx
lilypond.lyx
linguistics.lyx
springer/sv*.lyx
de/linguistics.lyx
es/linguistics.lyx
ja/FeynmanDiagrams.lyx
ja/lilypond.lyx
ja/beamer.lyx
ja/xypic.lyx
The following is the script that I used (in lib/examples):
LYX=../../build/src/lyx
$LYX -E pdf2 $1.old.pdf $1
sed -i "s/^\\\\begin_inset Separator parbreak$/\\\\begin_inset Separator plain/" $1
sed -i "/^\\\\begin_inset Separator latexpar$/ { N; d; }" $1
$LYX -e lyx $1
$LYX -E pdf2 $1.pdf $1
diffpdf $1.old.pdf $1.pdf
The difference has been validated with diffpdf.
The following could not be tested and were left unchanged:
AEA.lyx
IJMPC.lyx
ja_beamer-conference-ornate-20min.lyx
The following is the script that I used (in lib/templates):
LYX=../../build/src/lyx
$LYX -E pdf2 $1.old.pdf $1
sed -i "s/^\\\\begin_inset Separator parbreak$/\\\\begin_inset Separator plain/" $1
sed -i "/^\\\\begin_inset Separator latexpar$/ { N; d; }" $1
$LYX -e lyx $1
$LYX -E pdf2 $1.pdf $1
diffpdf $1.old.pdf $1.pdf
We do not currently handle UTF-8 characters in our layout strings.
Replace dashes with simple ASCII dashes to avoid the following
error:
msguniq -o lyx.po
msguniq: input file '-' doesn't contain a header entry with a
charset specification
This commit amends the recent commit b4dcad83.
This was discussed in the thread "Translations of Math environments in LyX
output for LyX 2.2" at http://www.mail-archive.com/lyx-docs@lists.lyx.org/msg08633.html
and has been reviewed. The problem was that in 2.1, the portuguese translation
was correct in lib/layouttranslations but different in po/pt_PT.po. In fact,
the translation is the same for all three languages spanish, portuguese and
brazilian portuguese.
This is the same as the parbreak separator and is represented on screen
as the old parbreak. Old parbreak separators are converted to latexpar
separators when they are used for introducing blank lines in the
latex output rather than for separating environments.
Instead, parbreak separators are now represented on screen by a
double line. In essence, latexpar and parbreak separators produce
the same output but are represented differently on screen.
The context menu does not account for latexpar separators and only
"true" separators can be turned each into the other one.
After some discussion between Georger, Pedro, Pavel and me Georger came to the
conclusion that Mapa is not the correct translation of Chart in this context.
Originally he proposed Gráfico, but since that would be identical to the
translation of Graph we decided that Diagram is better. It is a bit more
general than Gráfico, but it is also used in pt_PT, and the german translation
uses the german equivalent, which is more general as well. Those who need a
Gráfico can still use Graph.
Unfortunately Geoger based the new .po file on the remerged one at
259196e1a6, so we have now the situation that pt_BR is remerged, but the
other languages are not.
These translations were changed implicitly at ad6ab20bb1: Previously, the
translations were taken from pt. At ad6ab20bb1 all pt_BR translations were
copied from pt_BR.po, so we do still need a review for those that differ from
pt_PT.
The term LongTable has been deprecated and moreover the renaming makes the interface easier to the eye.
File format updated to 507. (conversion based on jamatos patch)
Layout format updated to 60.
tex2ylx tests updated.
Document EmbeddedObjects.lyx has been updated.
We now create a backup file when overwriting a file with a new file
format. See #9554 and cc83dfa8. This is now documented in
RELEASE-NOTES.
Thanks to Livu.
These have been forgotten by the last update, since bg, ko and sl are not in
po/LINGUAS. I add them here so that it is obvious that these translations are
missing.
When running the tests with ctest, --rerun-failed can be used to run
the tests that failed on the previous run. However, the same subset
must be specified because it is the test numbers that are used to
index which tests failed on the previous run. For example, it would
be incorrect to do the following:
ctest -R export
ctest --rerun-failed
The following is correct:
ctest -R export
ctest -R export --rerun-failed
* Increase LyX format
* New function convert_info_insets in lyx2lyx_tools.py
Use this function in the future for future updates of info insets
* Convert "inset-modify tabular" to "tabular-feature" in info insets
* Remove icon naming hack regarding "inset-modify tabular"
Unfortunately the footmisc package does not work together with hyperref:
Before 0bf8b8a1, a footnote in a section title was created as a link in pdf
outpout, after 0bf8b8a1 ist was no link anymore. For now we revert to the old
code, and wait until the footmisc and hyperref packages are made compatible.
See my post on the list - enumitem is already described in the userGuide.
(Besides this a makefile entry was missing for the file.)
Please don't add documentation files without a discussion or a review, especially not in a beta phase.
We do now have .sfd sources for all fonts, so either we distribute all of them
with the source package or none. Since the accumulated size is not negligible,
and the are not needed to build LyX, but serve a really special purpose, we
do not add them to the source package for now.
Thanks to Enrico for doing the actual work (my fontforge omits the
TtInstrs...EndTTInstrs blocks for some reason I do not understand).
I did only check that the only difference between the old and new .ttf is the
changed position of the bracketleftbigg glyph. This does finally fix bug 6115.
Generating a ttf from cmex10.sfd would fix bug 6115, but unfortunately I am
unable to export a ttf with the same settings as the existing one, so this has
still to be done.
Since \output_changes is written again at the original position, we need to
fix those files that have been updated using the intermediate version.
The update was done by running development/tools/updatedocs.py <lyxexe> where
<lyxexe> was the path to an up to date LyX binary. All files that did contain
additional changes were reverted:
lib/doc/LFUNs.lyx
lib/doc/UserGuide.lyx
lib/doc/Shortcuts.lyx
lib/examples/de/beamer.lyx
The \SpecialChar changes are fine, these files have never been saved by LyX
after the update to 483.
Increment LyX format to 504.
With this new parameter, the user can indicate that some other parameters that
are frequently switched must not be recorded in the file (as if they were a
setting specific to the user or transient, rather than a document setting). This
will play nicer with version control systems.
See the discussion, e.g.:
http://thread.gmane.org/gmane.editors.lyx.devel/157824/focus=157993 (third
solution mentioned)
TODO:
* The interface remains to be set up. We cannot change this setting from LyX
for now.
* If save_transient_properties is false, we should read the user setting as a
per-user-per-document (session) setting (e.g. like the cursor position).
* Once the above is done, we can treat \justification the same way (but it would
be even better if \justification was moved to lyxrc).
The current behaviour of the \origin parameter replaces relative file names
with the absolute original names if a document has been moved even if the
files have been moved as well. This behaviour is annoying e.g. for editing the
LyX docs in a git checkout.
Now file names are only replaced if the referenced file sdo not exist.
The lib/unicodesymbols part is based on work by Günter Milde:
Both, \r{A} and \AA (rsp. \r{a} and \aa) are equivalent standard LICR macros
for Aring/aring as well as the deprecated "angstrom sign" character (212B).
However, with \AA for 212B and \r{A} for 00C5, tex2lyx converts \AA to the
deprecated "angstrom sign" which is missing in many fonts including the
Unicode version of Latin Modern.
I added the normalize_c() calls so that tex2lyx prefers the precomposed forms
(these are better editable in LyX) and the deprecated flag.
* missing characters in linguistics example with system fonts
* language nesting problem in fr/linguistics example
* 110f505b63 solved one failure (Basque example file)
This does not change output, only GUI.
paper: make sure that the starred sections use proper sans serif on screen.
foils: add relevant categories to layouts
The default behaviour of git for text files is to store unix line endings in
the repository, and to convert to native line endings in the local workspace.
This plays well with the LyX behaviour of storing files in native line endings.
Unfortunately it may break if files are sent around by email and submitted on
a different OS than the one they were last saved, and this did probably happen
in 6b0632eea.
These were using lyx2latex, assuming the result can be used in verbatim
insets as is, which is not the case (mostly due to \\backslash).
A new lyx2verbatim function is now used instead. Also, ERT insets are
dissolved in the gloss reversion process.
Preliminary work for addressing #7790. Thanks to Richard for providing initial
files this is based on.
Adding to TextClass:
OutlinerName <string> <string>
(the second string is translated)
e.g.:
OutlinerName thm "Definitions & Theorems"
Adding to Layout:
AddToToc <string> (default "", means no)
IsTocCaption <bool> (default 0)
e.g.:
AddToToc thm
IsTocCaption 1
Adding to InsetLayout:
AddToToc <string> (default "", means no)
IsTocCaption <bool> (default 0)
e.g.:
AddToToc literate
Adding to inset arguments:
IsTocCaption <bool> (default 0)
Pdflatex is the recommended export tool for the manuals.
Pdflatex brings the best results for hyperlinking.
Some features (e.g. rotated text) are not available in DVI or PS (dvips).
This does not affect export from command line or autotests
(where this setting is ignored and the format must aways be given explicitely).
After removing "unneded" PNG files from the repo, this manual failed.
Skaling is done to ensure that the icons are approximately one M high.
Also, the default output is set to PDF (pdflatex) as this is said to be the export
format our manuals are designed for.
Always-Babel now set in the example document.
Adapted the autotest categorization:
* fails for some developers (why?)
* wrong output with pdflatex/LuaTeX and DVI (missing landscape slides).
We do not update the local layout of our .lyx files because users
would then not be able to export to older formats. For example, if a
2.2.0 user exported a template to 2.1.x format and tried to open the
file in LyX 2.1.x, there would be an error because the file would
contain a local layout whose format is too new. The root reason for
this is that we do not convert layouts to older layout formats.
Otherwise it could easily happen that the order is changed, since rsvg_convert
seems to be more picky about invalid files (see http://www.lyx.org/trac/ticket/9891)
exist. This will allow for a proper fix for bug #8796, though that may or may
not get fixed before 2.2.0.
Also, change the InStyle tag to ModifyStyle, per a suggestion of Jurgen's.
patch. Also fix some escaping problems (\end instead of \\end).
My testing revealed some other problems with this routine: stray
\noindent tags popping up here and there. I don't have time to fix
it right now but will try to come back to it.
Some templates had the inputenc setting "default" (meaning
use the language default encoding, (not TeX's default which is 7-bit ASCII) but
don't load inputenc, leave handling of non-ASCII characters to the author).
This is no apparent problem as long as no non-ASCII character is used in the
document. It is very unsave, however, as any non-ASCII character used in the
document has the potential to either make compilation fail or be
misrepresented in the output.
No single translation has been changed, but pt_BR and pt_PT are now correctly
sorted. This removes the artifical diffs that running
make ../lib/layouttranslations
did produce previously.
Also MacOSX ReadMe files. Note that a few lib/doc files are
also "updated" because trailing spaces are removed, but their file
formats are the same because they were recently updated at 83672113.
I did "git checkout LFUNs.lyx" because this file is generated
automatically and has a special header.
Prevent loading of lmodern.sty if non-TeX fonts are set and
Define DejaVu as non-TeX font.
This ensures that non-TeX fonts are used if requested (lmodern.sty set
the 8-bit version of LatinModern if compiling with LuaTeX).
Also ensure that a font with all characters is used. (LatinModern misses small
Greek characters.)
Similar actions for other manuals and examples with Greek or Cyrillic script
will solve some more export tests with non-TeX fonts.
These were fixed manually. I tried to add an option to updatedocs.py to
open and save a file with LyX, but that did not work, since
lyx -x 'command-sequence buffer-write ; lyx-quit' does not write and does
not quit.
gen_lfuns.py does now produce the current file format, and and LFUNs.lyx was
re-created with the updated script.
There is one difference if you compare this version of LFUNs.lyx with the old
version updated by lyx2lyx: All occurences of LyX, TeX etc. in the lfun
descriptions are no longer output as logos. I do consider this as a feature,
since the old version did also output the TeX part of BibTeX as a logo, as well
as places where the names were part of some syntax, e.g. lyx::LyXRC::LyXRCTags.
lyx2lyx did not yet know about /systemlyxdir/ and set \origin to the path
where my git tree lives instead. This path is not usable except on my machine,
so better write something more usable instead.
This is a special command line switch of lyx2lyx, so it does not interfere
with normal usage. I did not try to deduce the systemlyxdir from lyx2lyx to
be on the safe side.
This is one part of bug 9744: If you toggle between TeX fonts and non-TeX
fonts, the settings of the other choice are no longer thrown away, but stored
and re-activated if you switch back. Most parts of the patch are purely
mechanical (duplicating some BufferParams members), the only non-mechanical
change is in the GUI logic.
then just perform a null conversion. This seems better than aborting
with an error. I can imagine a script that converted all files in a
certain directory to format 498, and you don't want it to be an error
if one of them is already 498.
Prior to this, what lyx2lyx would do is convert to the lowest format
in the current version. So, e.g., asked to convert 498 to 498 it would
convert to 474. That is obviously wrong.
Each way might be preferred by a different developer and the more
ways that can be described of running the tests, the higher the
chance is that developers will find a way that works well for them.
Explain why the export tests are enabled for formats that are not
expected to work well with certain document classes, modules, or
packages. The reason is that if a .lyx file goes from compiling
successfully for one format (even if that format is not officially
supported for the combination of features used), if that document
suddenly fails to compile, there is a significant chance that a bug
was introduced in LyX. In other words, there is a high signal/noise
ratio. If it is determined that a test is failing because an
expected incompatibility is exposed, then the test can be inverted.
People working on the documentation do probably want to switch this on. It
gives easy access to LyX and LaTeX logos (bug 9626), and the info and menu
separator insets.
The export tests, check_load tests, and URL tests are now documented
in the Development.lyx file. The export tests are described in
detail, such as how to run them and how to interpret the results.
These icons are for lfuns that are not very interesting for users, but quite
often used when working on the LyX documentation. Now we can create a special
LyX documentation toolbar.
Many of our documents have babel-specific preamble code. By putting
this code in a \@ifpackageloaded{babel}{}{} conditional, XeTeX and
LuaTeX compilation with polyglossia now works. This fixes some
LuaTeX tests that were broken by edd37de8 and also allows us to
uninvert some XeTeX tests.
Note that in some of the files although the preambles were fixed to
allow for polyglossia, they still do not compile without errors:
es/Math.lyx
es/Customization.lyx
de/Customization.lyx
Similar fixes might be desired in other manuals but these at least
fix regressions in the tests.
PolyglossiaOpts are case-sensitive so "latin" must be changed to
"Latin". Without this change, compiling examples/sr/Braille.lyx
with LuaTeX and system fonts gives the following error:
Package Polyglossia Error: Unknown script `latin' for Serbian
language
Many of our Spanish documents use babel-specific features in the
documents, e.g. to write "sin" in Spanish ("sen"). Because babel
seems to have good support for Spanish, I am setting the "Always
babel" for the manuals.
This fixes several LuaTeX tests with non-TeX fonts. A XeTeX test is
also reverted accordingly.
Some of my following commits will make changes to these files
(mainly just changing the preambles). This commit simply updates the
format so the diffs of the following commits are easy to read.
Since a while now we can translate the unit descriptions. For some special applications it is also necessary that the users know the LaTeX command of the relative units.
- also fix a typo in Customization.lyx
- also disable PDF-reply since this never works correctly and it could even destroy the whole PDF and exceeds the TeX capacity
- update the french version accordingly
paralist.sty extends the standard list environments by some more compact
versions. Support for this has already been requested 15 years ago, and
now I needed it myself.
* Omit commented-out lines
* Properly escape backslash
* Do not allow non-space chars after delaration
* Allow blanks before # comment character
Fixes: #9746
Greek and Times under MikTeX with auto-install may fail due to a half-installed
font package. However, the workaround in LyX stands in the way of
alternative approaches (see bug #6469).
`os.popen` is deprecated since Python-2.6. Also, this fixes the handling
of files with quotes in their names. The patch requires Python >= 2.7.
Furthermore, the patch executes the lyx2lyx script with the same
interpreter used for it, to maintain compatibility.
I also removed some lines related to Python-2.4, as it is no longer
supported anyway.
Actually photos (i.e. .jpg files) where supported previously, but for pdflatex
output an unneeded conversion to png was done. The RasterImage templates
behaves now exactly as InsetGraphics for these files: If the input format is
jpg, use that for pdflatex, else convert to png.
This is another advantage of the new logo insets: We see in LyX where they are
inserted for the output. In these two cases, the text describes keywords of
the external template configuration file language, so these should not be
typeset as logos.
The difference to bitmap graphics is that these will be included as PDF for
pdflatex, so the vector properties are retained if a suitable conversion path
exists.
This brings the external inset on par with the graphics insets as far as the
clipping option is concerned. The graphicxs package supports both: A bounding
box without units (which means that bp ia assumed), and a bounding box with
units, so we can simply output the values including the units.
Being able to compile document with zipped .eps files was a useful feature of
the graphicxs package 20 years ago, but the LyX support is no longer relevant:
- The flag is ignored if preview is on
- If pdflatex is used then uncompressing happens during the compilation anyway
- If set, the flag prevents LyX from issuing proper error messages if
something with the image is wrong
- For hard disk capacities from 20 years ago not uncompressing is a useful
feature, but for current hard disk capacities it does not matter
- The external inset does not have it, and if we want to merge both insets
one day we would need to implement it there, which is even more difficult
than in InsetGraphics
Now the minibuffer toolbar is "auto" by default. It is opened by
command-execute (M-x) and closed when the command is executed without error.
* make lyx::dispatch return a DispatchResult struct
* there is a new MINIBUFFER type of toolbar, that can be used for this use.
* remove special handling of M-x in minnibuffer; Escape can be used instead. Fix focus in this case.
* when minibuffer toolbar is "auto", make the toolbar close itself after
- a command has been executed without error
- an empty command has been executed
- the Escape key has been used
[this is actually commit fdcff02a, which was later reverted at dd61d8cf]
LaTeXFeatures defines \textcommabelow and \textcommaabove based on a
generic \LyXTextAccent and declares TextCompositeCommands for the Baltic
letters in the T1 font encoding, using \textcommaabove for the small letter g
and \textcommabelow else.
This allows overwriting of the composite definition for other font encodings.
Especially, it does not interfere with the polish/baltic font encoding L7x
(supported by LatinModern and TeXGyre fonts) that provides pre-composed
glyphs.
Greek characters with perispomeni (tilde) accent were not properly shown
in the output document, because the "textgreek" feature re-defined \~ in
a way incompatible with lgrenc.def since version 0.8 (2013-05-13)
(package greek-fontenc).
The compatibility-definition is required for older versions of the font setup
(before the move of "lgrenc.def" from "babel" to "greek-fontenc").
It is now done with "ProvideTextCommand" to not overwrite the more complete
implementation in lgrenc.def.
With the compatibility definition, combined diacritics with tilde
must be input with the tilde first (e.g. \~>, not \>~).
"unicodesymbols" is changed accordingly.
Also, some LICRs for combining Greek diacritical characters were added to
Unicodesymbols.
Add font encodings auto-set by babel.
Set font encoding for georgian to the babel default.
Remove InternalEncoding from languages that use a font encoding
compatible to T1.
Change (LaTeX input) encoding for Serbian (cyrillic) and Romanian.
See #9652 for details.
This fixes bug #9615.
The "notermination" flag tells LyX, that terminating an LICR macro with {} is
not necessary. This is normally the case for all macros with non-alphabetical
name (e.g. \{).
However, combining diacritical characters are converted to *accent macros*,
which expect an argument (the base character).
In Unicode, the base character precedes the combining character,
in LaTeX the combining character precedes the base character.
LyX changes the order of the two characters to get this right,
e.g. "x" + "combining tilde" becomes "\~{x}".
In the special case there is no preceding character (e.g. at the start of the
document or a paragraph), Unicode shows the combining diacritical character
without base character.
The replacement is currently not "terminated" (e.g. "\~"), because of the
"notermination=text" flags in "unicodesymbols".
The accent macros take the *following* character as base character, which is
clearly not intended.
In case of a paragraph consisting of just one combining diacritical character,
LaTeX compilation fails with an error.
With the patch, LyX writes the accent macros with an empty argument,
e.g. "\~{}", the output is similar to the view in the GUI with the diacritical
character on its own, not on the follwoing character.
* Take into account the filesystem encoding for the zip export on *nix
such that the representation of filenames in the zip archive is not
mangled, when possible. This only concerns the way filenames are displayed
as their creation in the filesystem was nevertheless correct.
* On Windows, try to obtain the command line parameters from the wide char
representation by directly accessing the platform APIs through ctypes.
This allows to also deal with filenames not exactly representable using
the current code page and corrects a bug resulting in silently dropping
those kind of filenames.
Now the minibuffer toolbar is "auto" by default. It is opened by
command-execute (M-x) and closed when the command is executed without error.
* make lyx::dispatch return a DispatchResult struct
* there is a new MINIBUFFER type of toolbar, that can be used for this use.
* remove special handling of M-x in minnibuffer; Escape can be used instead. Fix focus in this case.
* when minibuffer toolbar is "auto", make the toolbar close itself after
- a command has been executed without error
- an empty command has been executed
- the Escape key has been used
Instead of redefining \usepackage for avoiding the microtype package
when generating previews in dvi mode, the draft option can be used
for disabling it. This also allows to somewhat simplify the
fix_latex_file function.
