New bug in TeXLive 18.
Missing characters with XeTeX and wrong characters with LuaTeX.
Also:
* Remove spurious (Latin) characters from uk/Intro.lyx
* "wrong-output" tag for Cyrillic documents with XeTeX and TeX fonts.
* Do not change font choices when testing with non-TeX fonts.
* Add "nonstandard" tag for documents with requirements outside TeXLive.
* Ignore missing character in legacy Basque document.
The SinglePar update flags has been a no-op for a long time without
naybody noticing. This means that the current paragraph was
always rebroken and redrawn, even when only moving the cursor around.
Now we only do that when Update::SinglePar has been specified. This
means that there may be cases where update will not be correct
anymore, because this flag has not been specified. These places will
have to be found and fixed.
Update PAINTING_ANALYSIS.
Documents used deprecated or lookalike characters missing in
Latin Modern system fonts:
Customization.lyx: "figure dash" instead of "emdash".
revtex4-1: "Angstrom sign" instead of "latin letter A with ring".
Prevents wrong or missing characters with LuaTeX and 8-bit fonts.
Also "uninvert" the corresponding test case and two other
no longer failing "unicodesymbols" exports.
- enable support for Georgian
- update file sizes
- re-introduce the dictionary download because it is necessary to step through several mirrors if necessary. This function was once added because as it is now, only one mirror is used, if it is dead the user won't get the dictionary
- update the mirror list
If Document>Settings>Language>Encoding is set to any value except "auto" or "default", we
expect the whole document to use this encoding. Wiht encodings from the CJK package, this means
one big "CJK" environment and no encoding switches.
Characters that are not handled by the CJK package need to be "forced" in lib/unicodesymbols.
This is completed for "euc-cn", the others will follow.
LyX expectedly gives the following warning:
TextClass.cpp (1385): The layout does not provide a list command for
the float `sidebar'. LyX will not be able to produce a float list.
This issue was reported to the maintainer. This commit is consistent
with 00f7a95f.
The cls is obsolete, so all PDF exports are disabled. We keep the
1.6.x and 2.1.x tests because those only check roundtrip
convergence, and do not export to PDF.
It used to give an endless loop, so we "ignored" it (did not run the
test). Now it gives a lyx2lyx warning, which is reported at #11455,
so it is appropriate to invert the test.
The 001-4-latin_utf8x_pdf2 test passes and the
001-4-latin_utf8-cjk_pdf2 test fails, which means that there are
characters in the .lyx file that are only available with
utf8-extended encoding, so the utf8 test is never expected to pass
in the future.
Thanks to Kornel.
utf8-plain (Unicode (utf8 XeTeX)) is a power-user setting
for the input encoding with two use cases:
a) setup of system fonts or
b) setup of input encoding supportuser preamble
in the document class or user preamble.
The test file is an example for use case b.
On Mac the inkscape binary is started by a wrapper script. This script changes the
working directory internally and fails to process files with relative path names.
The previous attempt to solve it was to pass the file names with absolute names
by prepending them with the $$p variable (representing the directory name of the files).
This broke the on screen conversion (used for SVGZ to PNG e.g. in the users guide)
because here the $$p variable is undefined.
Now the wrapper script of LyX which is used to locate the Inkscape.app bundle converts
the relative path names into absolute names and the $$p variable is removed from the
converter definitions for inkscape again.
The Korean splash.lyx is expected to fail with pdflatex. The lyx22x
and lyx23x tests were not failing before because they were exporting
to XeTeX with system fonts, which succeeds. After c9e62dec (which
corrects the export format to the default), the lyx22x and lyx23x
tests should be inverted.
Amend eec3d1eb,7568571a
We are trying to check if the resulting file after lyx2lyx
is compilable, we have to ensure that copying the original file
to the test directory does not mangle use_non_tex_fonts-entry.
These tests failed because of (multiple instances of) the following
warning:
Warning: a buffer should not have two parents!
This warning is expected, because, for example, chapter-1 includes
Bibliography.lyx and chapter-2 includes Bibliography.lyx. thesis.lyx
includes both chapter-1 and chapter-2, so both are loaded (but
hidden), and Bibliography.lyx is loaded (but hidden), and LyX then
sees that more than one buffer includes Bibliography.lyx
The consequence of ignoring this warning is that we will not catch
any future regression that triggers this warning when it should not.
The change is only relevant to development as all the call to python scripts is done
calling C++ os::python that invoques the appropriate python version.
The change is two fold, on one hand remove all the uses of /usr/bin/env for python.
On the other hand rename all the calls to python from python to python3 making it explicit
and being compliant with PEP 394 -- The "python" Command on Unix-Like Systems:
https://www.python.org/dev/peps/pep-0394/
Remove the sheebang from src/graphics/GraphicsConverter.cpp because it is not necessary.
Some small whitespace changes.
Exception: findadv-21, but it is not a regression,
because this one never passed.
The problem here is, that we cannot differentiate
between enumeration, itemize, description and labeling
environment here.
Now tests findadv-01 ... findadv-20 pass too.
keytest.py: Expanded time for controll keys (like \[Return])
findadv*: expanded time for normal keys
lyxfind.cpp: Handle math equations
The main change here is that we need to delete LyX2.3.exe and
tex2lyx2.3.exe from the install directory, so they are not left
there (from previous, versioned installs).
(cherry picked from commit 0cbde8a834)
The compilations fail because the macro
\DeclareUnicodeCharacter
is not defined. Also the sequence
\ifnum\pdfoutput=\z@
is making troubles.
The exports to previous lyx-versions is disabled too,
because there is no layout defined there.
This uses the InsetArgument interface to provide access to a document
part hitherto inaccessible by LyX: the part between \begin and the first
\item in a list (where lengths and counters can be redefined, for
instance).
Fixes: #11098
File format change, layout format change
This returns a localized version of a string (in the GUI language)
if available, removing trailing colons and accelerator marks.
This can be used to refer to dialog items in the docs in a portable way.
With this commit, info insets leave the dark backstage room of an opaque
and quite hidden dev-only feature and come frontstage.
In the UI, they present themselves as "Fields" since this is what people
know from word processors. Other user-related fields that could be
implemented next: time, user name (I plan to do that for 2.4).
Since this supersedes date-insert, I removed Insert > Date from
the menu and propose to ditch date-insert and the corresponding rc.
The lyx2lyx reversion routine has lots of room for improvement and
attractive tasks for pythons (file timestamp, switch of localization).
Please feel invited!
This is a file format change.
Uses the correct shortcuts from lib/bind/sk/menus.bind, but fails nonetheless
because the regex for advanced search cannot find the correct list type.
(That is: it cannot distinguish between 'enumerate', 'itemize', 'labeling', etc.)
This effectively enables linebreaks, multipars and layout changes in
non-fixed width (i.e., standard) table columns.
Fixes: #6577
TODO: metrics are wrong (too wide) on screen with linebreaks.
1.) Rename LYX_PATCH_VERSION to LYX_RELEASE_VERSION.
This matches the use in automake.
2.) Don't display LYX_DATE at configure time.
This value is evaluated later at build time
This is an extra command used for sidenote citations. Since we do not
provide \cite with natbib (which tufte uses) as a choice, we use the
new AddToCiteEngine feature to add it.
File format change.
Fixes: #11150
It is now possible in the float settings (doc dialog) to specify a global
(inner) alignment for floats, and in the float settings, this can be
overridden (just as with float placement)
Fixes: #8665
File format change.
This revives a ten year old idea (and patch) by Dov.
You can now mark in the character dialog text and exclude it from spell
checking.
Fixes: #1042
File format change
Remaining issue: The instant spell checking marks are not immediately
removed, but only after some editing.
Following a request by Günter, we consider the document fonts (only rm
for now) when selecting an appropriate font encoding.
See #9741
The new default font encoding setting "auto" does
* consider the font encoding needed by the language(s), which can now
have fallback alternatives
* Consider which font encoding is provided by the document font
Thus, cm now will result in OT1 fontenc, if the language can deal with
that.
The font_enc pref is ditched: it is no longer needed.
The automatism is still very basic and is subject to extension.
File format and prefs format change.
Use the command as defined by Babel. This allows us to use the (more
advanced) Babel command if provided instead of rolling our own.
I add a dummy file format change in case it turns out we need to
do something here for old documents (e.g. with user preamble definitions)
Replace CHECK_CXX_SOURCE_COMPILES() with TRY_COMPILE()
Discarding the link-stage mimics the behaviour used by automake.
Now the testsource is compiled regardless if hunspell
is external or not.
The compile test for 3rdparty hunspell is omitted,
because the macro check_cxx_source_compiles() tries also to link.
But at the time of the check, the required library is not there.
These file don't contain the \\origin tag. So the possibly included
files with relative path would not be found. The compilation to
the default pdf would then anyway fail.
- at the moment some files were in Unicode, some in CP1252 which can make unnecessary troubles
- remove an obsolete file
- update InstallerStructure.odg
- therefore the command line parameters changed
- all babel packages must be required
- use another default mirror that is hopefully not down 2hours every day
1.) The check for "QT_USES_X11" expects the created application
to run, but the '.exe' file does not run on linux.
2.) Don't use megered build anymore, it is not faster
on multi-processor machines anyway
Use the LaTeX internal character representation (LICR) macros
provided by lgrenc.def (since version 0.8 from 2013-05-13)
in lib/unicodesymbols. This fixes the PDF bookmarks (except for the
legacy input encoding iso-8859-7) and solves the problem of a missing
"v" character in Libertine LGR fonts (see lyx-users from 2018-01-29).
The ctest unicodesymbols/008-greek-and-coptic_iso8859-7_pdf2" now fails
(due to #9681). This is not a regression, as it is already
"unreliable" (wrong output, Latin character instead of Greek).
Drop compatibility definition of \~ as perispomeni accent
(that was required with lgrenc.def < 0.8).
As of enchant 2.x, it is required to create a Broker instance instead
of relying on a static one provided by the library.
Add autoconf and cmake (courtesy of Kornel) tests that check whether
one can indeed instantiate a Broker object, and act on the result in a
new broker() helper function.
Fixes bug #10986.
If, after the 10th iteration, the exported lyx16x file still
differs from the one in the previous iteration, the test
is marked as failing, even if still loadable.
The "bxjsarticle" class only supports export with XeLaTeX and system
fonts.
This commit uses the new exclusion functionality introduced at
10cd5dd2.
The following tests are now ignored:
export/examples/ja/knitr_dvi
export/examples/ja/knitr_pdf
export/examples/ja/knitr_pdf3
export/examples/ja/sweave_dvi
export/examples/ja/sweave_pdf
export/examples/ja/sweave_pdf3
The following tests are no longer ignored:
export/examples/ja/knitr_pdf4_systemF
export/examples/ja/sweave_pdf4_systemF
This allows us to exclude matches of certain patterns in
invertedTests, ignoredTests, unreliableTests, and suspendedTests.
To use this new functionality, prefix "!" to the pattern.
This functionality serves as a workaround in some cases to not being
able to use advanced regular expression techniques, such as
"negative lookahead", with CMake's regular expression engine.
Output of "ctest -N" is unchanged by this commit.
This functionality will be used soon (see next commits).
Patch from Kornel Benko.
- use https in URLs
- remove unused code
- use variables if possible
- LyX 2.3.x won't support Windows Vista because Qt 5.9 does not and other third-party programs will follow soon
Since they are not supposed to contain versioned strings like LYX_DIR_VER,
it is sufficient to copy them instead.
Besides, they also may be non-utf-8 coded, which would also break the conversion.
- update the file list in Makefile.am
- don't try to build it via CMake because this requires more than CMakeLists.txt. If it should nevertheless be built via CMake the .cmake files need to be rewritten from scratch
- remove unused and outdated files
- update an SVG file
- also remove Qt5XML in the installer as it appears not to be used by LyX
- update to latest MikTeX installer which resolves some problems
- add a note that pdfview is not yet ready for full Unicode support
This computation did not make sense anymore since we began to put the
contents in the Row object. The fact that it worked was a coincidence.
Instead, we set rows as changed() on creation and reset that once they
have been drawn. This will allow in the future for a finer definition
of what to redraw or not.
Also update the PAINTING_ANALYSIS document
since a few months MiKTeX's package manager required the option "--admin" when calling it with admin privileges
- also register the .lyx21 file extension for LyX 2.3
- also update the LyXRC version number
The goal of this commit is to ensure that a processUpdateFlags call
that requires no redraw will not override a previous one that did
require a redraw.
To this end, the semantics of the flag argument is now different: its
value is now OR'ed with a private update_flags_ variable. This
variable is only reset after the buffer view has actually been
redrawn.
A new Update::ForceRedraw flag has been added. It requires a full
redraw but no metrics computation. It is not used in the main code
(yet), but avoids to compute metrics repeatedly in consecutive
processUpdateFlags calls.
The process is now as follows:
- if flags is just None, return immediately, there is nothing to do.
- the Force flag is honored (full metrics computation) and replaced
with ForceDraw.
- the FitCursor flag is honored and removed from the flags.
- the SinglePar update is added if ForceDraw is not in flags and only
the current par has been modified.
The remaining flags are only then added to the BufferView update
flags, and the update strategy is computed for the next paint event.
Finally the dubious call to updateMacros in updateMetrics has been
removed for performance reasons.
This should force the python executable to use the desired encoding.
The command is moved to a wrapper script to be able to set the environment
at make-run-time.
The goal of this commit is to ensure that a processUpdateFlags call
that requires no redraw will not override a previous one that did
require a redraw.
To this end, the semantics of the flag argument is now different: its
value is now OR'ed with a private update_flags_ variable. This
variable is only reset after the buffer view has actually been
redrawn.
A new Update::ForceRedraw flag has been added. It requires a full
redraw but no metrics computation. It is not used in the main code
(yet), but avoids to compute metrics repeatedly in consecutive
processUpdateFlags calls.
Finally the dubious call to updateMacros in updateMetrics has been
removed for performance reasons.
The current spelling is not strictly wrong, but flagged as unusual or
historical by some authorities. It is also found fault with many
spell checkers. Thus we decided to move to the more standard "-ible"
form once and for all.
See #10678 for discussion
This part only covers the usage in comments and the like. More to follow.
This will all also all be backported to 2.3.x, for the sake of backwards
compatibility (cherry-picking).
The export ja/lilypond_pdf fails because ps2pdf gives an error. It
is thus still inverted, under the category 'externalissues'. As
Jürgen discovered, ps2pdf succeeds if the -dNOSAFER flag is used.
Note that Kornel is seeing strange behavior with the sweave test,
and thus the label of that test might be changed soon (e.g. to
"unreliable"). For discussion, see:
https://www.mail-archive.com/search?l=mid&q=20171001032524.fr5xfngylththwv2%40steph
The variable CPACK_DEBIAN_PACKAGE_RELEASE has to be in the form
of "^[A-Za-z0-9.+~]+$". We will use the abbreviated commit revision for now.
Without this change cmake 3.10 emits error.
The wrapper script is placed in the binary directory of the LyX bundle.
It tries to find the real inkscape command line converter in the
Inkscape.app bundle and starts it or reports an error.
The configure.py is changed for Mac OS to check the presence of
the real inkscape binary in the Inkscape.app bundle.
Expliclyt set n:o digits in abbrev. hash in script that checks the
commit log to make script behave the same way on different platforms.
Also improve help text.
Handle name may be arbitrary string mathing '[A-Za-z0-9]*'.
This is then used by appending to the commands for the control file.
For instance select 'Alpha' as handle for the control file 'abc'
'COAlpha: abc' ==> open 'abc' for write
'CCAlpha:' ==> close 'abc'
The idea is to let a CI job regurlarly invoke this script in order to
check that there hasn't been any new commits where the author of the
commit doesn't have an @lyx.org e-mail address. If this is the case,
the CI job is expected to fail and a warning e-mail will be sent to
lyx-devel@lists.lyx.org.
Traditionally LyX behaves differently when the directive DEVEL_VERSION
is defined at compile time. This covers
* more detailed description of current position in status bar
* the help files are open in read/write mode
* more detailed debug output in the View Source panel
This patch introduces the new function devel-mode-toggle that allows
to use devel mode in stable releases, and vice versa.
The information is saved in the session file. The default is to
disable devel mode.
Remove all traces of DEVEL_VERSION in autoconf and cmake
This is not needed for recent cmake versions, but since we expect
also older cmake version be used, sort the list nevertheless.
See https://reproducible-builds.org/ for why this matters.
Amends b8e3615
Could not find a suitable tex font for the following tests:
export/doc/uk/Intro_pdf4_texF
export/examples/uk/splash_pdf4_texF
export/examples/minted-filelisting_pdf4_texF
1.) Handle also 'LatexCommand inputminted' in lyxStatus.pm
2.) Add '-shell-escape' to the appropriate converters.
This applies only to the ctest-environment iff calling
the script 'prefTest.pl' in the build directory.
Update the listings inset to optionally use the minted package
(instead of the listings one) for typesetting code listings.
Only one of the two packages can be used in a document, but it
is possible to switch packages without issues if the used options
are the same. If a switch is made and the options differ, one needs
to manually adjust them if they were entered in the advanced options
tab, or apply again the gui settings.
Note that minted requires the -shell-escape option for the latex
backend and the installation of additional software (python pygments).
keytest.py: This gives the os some time to update the status.
All keys with modifier and all possible shortcuts are affected.
Shortcut use corrected in findadv-11-in.txt and findadv-17-in.txt
Now, before starting a test with 'TestBegin' in any *-in.txt file
we can create ne shortcuts used by this test.
Defining a shortcut:
UseShortcut "<shortcut>" "<function>"
Actually adding the new shortcuts to be used by the next lyx-session:
PrepareShortcuts
Use example is found in findadv-combined-in.txt
The UseShortcut-entries will be traslated into '\bind "<shortcut>" "<function>"'
and with the PrepareShortcuts-entry added to the active use file 'user.bind'
Function keys are sent to xvkbd as e.g. \[F15], so we should
not split a sequence like "\C\[F15]" into two text pieces.
(Do it like other keys not having a digit in their name (e.g. \[Return]) )
The controls are described in hello-world-in.txt as
Cr: not expected regex search pattern before next expected match
Cp: not expected search pattern before next expected match
See also findadv-re-04-in.txt for an example
In this test-case, searching for case sensitive and format considering
search is failing.
This test started failing after 8bf3d7bb. I did not look deeply into
why, because the corresponding de and es tests were already
inverted, and because in general we do not expect texF tests to work
well.
The controls are described in hello-world-in.txt as
CO: for control file open for write
CN: control notice
CP: simple search pattern
CR: regex search pattern
CC: close control file
The control-file will be used at the end of test by searchPatterns.pl
Suppose, we want to test a key sequence which should produce
logs in defined sequence. ATM, we use pcregrep to see, if
a pattern occurs in the log-file. This is OK, if using only single
tests with only one message to care about.
But it is not OK for combined tests.
As an example, the file 'findadv-combine-in.txt' is combining
tests findadv-re-01-in.txt, findadv-re-02-in.txt and findadv-re-03-in.txt.
This test runns here about 25 seconds, while the time for the other three
is about 144 secs.
(Most time is with starting/stopping lyx)
Often the relevant entry (e.g. /proc/xxxx/status) exists,
but is empty. This led to many tests fail, mostly at
the first tests after the start of the OS.
- since CMake 3.5 the path to the cmake.exe is no longer by default written to Windows' PATH variable. Therefore this has to be done in the script.
- Windows path can contain spaces (CMake's default installation folder does) so we must use quotes around the paths
- set the CMAKE_PREFIX_PATH variable
The culprit in keytest is the possibility to lose some keystrokes.
The idead here is that the keystokes are cached by QT until some
control character is entered forcing e.g. new dialog.
So, splitting input lines at these characters should be enough
to ensure that the next chars are not lost.
iconv fails, if a nomenclature inset contains an uncodable character
This led to failure of the indonesian UserGuide in the attic.
Fix it there and add a minimal, specific test sample instead.
1.) Don't modify the line as it happened at start of sendKeystringLocal()
2.) Split lines on each keysym (e.g. \[Return])
3.) Beatify the debug output of the sent text
This makes the wrapper working smoothly even for more complicated
input lines.
Also we do not need the window- parameter in call to xvkbd.
Still, there _is_ something fishy. At first run it can happen that
some keytest fail. But not reproducible at subsequent calls.
It feels like QT would cache some data and therefore lyx reacts
later faster.
This work is a result of collaboration with Tommaso Cucinotta.
Changes are:
1.) make it python3 compatible
2.) rewritten the lyx_status() routine
3.) routines lyx_sleeping(), lyx_zombie(), lyx_dead() now depend on lyx_status()
4.) dont send keystring "\Afn" at start as it is language dependent
5.) handling of TestEnd uses now lyx-commands to stop the lyx-session.
Use 'kill -9' only if unsuccessful
New special character to mark an optional line break
without inserting a hyphen (ZWSP). See #10585.
Corresponds to the Unicode character U+200B ZERO WIDTH SPACE
This isn't a “space”. It is an invisible character that can be used
to provide line break opportunities.
http://unicode.org/notes/tn27/
While the literal Unicode character can be used in the LyX
file, it is invisible in the GUI.
For visible feedback, the patch adds a new special character "allowbreak".
The small mark is inspired by LibereOffice.
A tooltip is added.
- from specific dependency on wish8.5, to just wish
- from checking the 2nd line of /proc/*/status, to grep-ing on sleeping (old system was failing on newer kernels)
- mode debugging and python output during tests
There a some exceptions related to the fact that BOOST_ASSERT throws
an unhandled exception, which is fait enough. This is handled by
uploading a modeling file to coverity.
The second batch of issues are related to the use of lexical_cast in
convert.cpp. We use now a wrapper around boost::lexical_cast that does
not throw but return empty strings instead. I am not sure actually of
when lexical_cast could fail.
- Mention the new buffer parameter in development/FORMAT
- Assure that lyx2lyx generates the same output obtained when saving
a converted document from within lyx
- Don't require any action when converting a document created with
lyx 2.2 in order to assure unchanged output (thanks José for the hint)
This commit fixes the regression introduced in 2.2 about the
output of en- and em-dashes. In 2.2 en- and em-dashes are output as
the \textendash and \textemdash macros when using TeX fonts, causing
changed output in old documents and also bugs (for example, #10490).
Now documents produced with older versions work again as intended,
while documents produced with 2.2 can be made to produce the exact
same output by simply checking "Don't use ligatures for en-and
em-dashes" in Document->Settings->Fonts.
When exporting documents using TeX fonts to earlier versions, in order
to avoid changed output, a zero-width space character is inserted after
each en/em-dash if dash ligatures are allowed. These characters are
removed when reloading documents with 2.3, so that they don't accumulate.
The added cmake-parameter is:
-DLYX_EXTERNAL_MYTHES=<value>
where <value> is one of
AUTO (Default) Search first on system for mythes (lib and include)
ON Use installed only (errors if not installed)
OFF Compile the provided source in 3rdparty
We don't invert unreliable tests for the same reason they are
inverted but, e.g., a nonstandard test that fails for some reason even with the
additional requirements installed or a test that shows wrong output
but also an error.
Added "export/export/latex/arabic_simple_pdf4_systemF"
and "export/doc/ar/Intro_pdf4_systemF"
to the list of tests which ignore "missing glyph" error.
Thanks to Jürgen Spitzmüller.
An update in TeX Live causes the test to pass (also for Kornel), so
now we uninvert the test.
I looked at the output file, and it seems fine to me (although it is
long, and I just checked briefly).
The new TeXLive uses font encoding TU for Unicode fonts with Xe- and LuaTeX.
The command \textquotedbl for straight quotes is no longer supported,
\textipa no longer supported with LuaTeX.
Problems with Spanish Babel and Xe/LuaTeX with 8-bit fonts lead to new errors
in some cases.
This adds support for the chapterbib package, but also adds ways to
produce this sort of multibib with biblatex and bibtopic (which are
both incompatible with chapterbib).
File format change.
This allows to somewhat simplify the text and avoid some uses of
Paragraph (in the long term, RowPainter should not have to access
these things).
At the same time do a small cleanup to RowPainter: rename
text_metrics_ to tm_, remove pm_ and width_.
File format change.
This allows for the relevant InsetCommand-based dialogs (such as
citation text before/after, Bibitem label, hyperlink name etc.)
to provide both the input of verbatim code or text that is transformed
to proper LaTeX code.
Some dialogs (Nomencl, Href) already had some methods (although they
could not be toggled), which are now centralized and streamlined.
The initial work of this patch has been done by Georg Baum (see
http://www.lyx.org/trac/attachment/ticket/2751/x.diff)
Fixes: #2751, #8227.
These are biblatex-specific multicite commands that allow for multiple
pre- and postnotes, as in:
\cites(pre)(post)[pre1][post1]{key1}[pre2][post2]{key2}...
with an optional general pre- and postnote, which applies to the whole
list (like [][] in normal cite commands) and an optional pre- and
postnotes for each item, so that pagination can actually be specified in
multi-cite references, as in:
(cf. Miller 2015, 2; furthermore Smith 2013, 23-23; Jenkins 2012, 103,
also refer to chapter 6 in this book)
See the biblatex manual, sec. 3.8.3., for details.
File format change.
New file: ignoreLatexErrorsTests
The sublabels in this list of export-testnames specify which error
messages should be ignored.
For each sublabel (for example "xxx") the lyx-command line is expanded with
"--ignore-error-message xxx"
We use the more comprehensive cochineal package if available and fall
back to the crimson package, if not.
Math support is provided by means of newtxmath
Fixes: #9974, #9976
* b `british' (``inner quotation'')
* w >>swedishg>> ('inner quotation') ["g" = Guillemets]
* f <<french>> (``inner quotation'')
* i <<frenchin>> (<<inner quotation>>) ["in" = Imprimerie Nationale]
* r <<russian>> (,,inner quotation``)
Rename "french" to "swiss"
Also rename "single/double" to "secondary/primary" ("inner/outer" in
the UI) and "left/right" to "opening/closing". Note that the inset
identifier string is left as is ("s/d" and "l/r")
Using this label in invertedTests expands the testname unnecessary, so that
we get e.g. labels like:
SUSPENDED.UNRELIABLE.WRONG_OUTPUT.UNRELIABLE_export/doc/de/EmbeddedObjects_pdf4_texF
OTOH, if using label 'unreliable', we get a warning about label-names clash.
The best is to reset any previous label setting.
This encoding (modified Mac Cyrillic for Asian languages) is rarely used and not supported by Gnu iconv.
Update comments in lib/encodings.
Update ctests: Gnu iconv only supports cp858, if configured with "--enable-extra-encodings".
The missing character problem is fixed upstream.
Also fix the scaling of the \sun-symbol-index by wrapping the symbol in \text.
(wasysym's \sun is valid in text and math mode. LyX currently adds a spurious \ensuremath.)
As Enrico pointed out in http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg131411.html, the loading error of testcases_speed.lyx is caused by tags from a LyX development version that were later removed but never handled in lyx2lyx.
LaTeX export still fails with
! Argument of \xargs@grab@opt has an extra }.
These tests are "unreliable" and thus their export status contains
less information than reliable tests. However, it contains some
information and could still be used to find regressions. This commit
helps keep the output of a vanilla "ctest" command clean.
See discussion here:
https://www.mail-archive.com/search?l=mid&q=20161127205800.epvjxkeri5yoeqwj%40steph
MiKTeX made a major package cleanup during the last 2 weeks. (Which caused a lot of troubles btw.) Many packages were removed and renamed. Now the list is complete again.
Test unicodesymbols for most supported input encodings with Kornel's addition to ctests.
Add required "forces" to unicodesymbols:
* utf8x does not support all characters supported by LyX
* several 8-bit encodings map characters to math-mode commands - force replacement in text-mode so that LyX can wrap them in \\ensuremath.
Fix a misalignment (wrong replacements) in the Cyrillic Unicode block.
Use \\mathscr for Mathematical Script characters in Mathematical Alphanumeric Characters (in line with the characters in other unicode blocks.
Rename the directory for test samples "export/latex/Unicode-characters" to "export/latex/unicodesymbols". This matches the purpose to test the lib/unicodesymbols file.
First run of Kornels patch for tests with all input encodings in lib/encodings.
Remove redundant sample files - keep only one sample and change the input encoding in the test script.
Put remaining failing test in "unreliableTests" for later sorting...
- fileformat change
- I could not update the tex2lyx test files because of bug #10440
- maybe the lyx2lyx routine could be improved but since a document can also begin with another layout than "Standard" I could not use the lyx2lyx function put_cmd_in_ert
* custom non-tex fonts with all required characters
* use 2.2 fileformat (easier backporting)
* test all export formats
Also, fix pattern for "mixing_inTitle_layouts" in unreliableTests.
force=utf8 is required for most characters provided by add-on packgages
and (almost) all mathematical characters, because these are not
set up for inputencs utf8
unicodesymbols.py failed here (python 2.7 under Linux) before the simple fix
included in this commit.
Specify non-TeX fonts that work in the source for documents that
fail with "missing characters" if compiling with "non-TeX fonts"=true.
(This does not interfere with the default output in any way.)
The new cmake 3.6 now also inserts correctly
this file into its control-file. But the syntax of the control-file
expects the description lines be indented by a space.
Also empty lines (only spaces) are not allowed.
Add an exception to the conversion of "missing character" warnings into errors.
The PGF package deliberately uses the dummy font "nullfont" to suppress output.
Therefore, warnings about missing characters in "nullfont" are really only warnings.
Also updated the comment: "Missing character" warnigns are especially widespread
in XeTeX/LuaTeX but can also happen with "classical" 8-bit TeX.
Feel free to port this to branch.
Move them to a subdir, ignore this subdir for other tests.
Dedicated test samples for LaTeX-specific problems don't give additional value if tested for loading, conversion, or other exports.
This led to errors when compiling with polyglossia (and non-TeX fonts).
A minimal (currently non-compiling) test sample is kept in autotests/export/
and inverted in suspiciousTests.
europeCV and modernCV examples can now be exported to PDF using
LuaTeX. For the specific output that was fixed, look at the diff and
see the description in suspiciousTests that was removed by this
commit. The output was checked manually and appears fine. These
tests are thus "uninverted".
Exporting those examples to DVI with LuaTeX does not exit with
error, but the output drops characters with accents. Thus, these
tests are now marked with the "wrong_output" label. I reported this
issue on the LuaTeX mailing list at [1], but since DVI export is not
given high priority, I don't expect much action.
Note that these changes reflect an updated TeX Live 2016
installation.
[1]
https://www.mail-archive.com/search?l=mid&q=20160831134006.4fewxothddqfeyw4%40steph
As of 0b1cf133 we now warn in the GUI of this issue, but there is a
discussion about whether we should change our LaTeX output and allow
for the workflow of mixing inTitle layouts. For more information,
see #10347.
The keytests were previously enabled by default if the necessary
dependencies were found. They require a GUI and mouse so can
sometimes be annoying. Further, they are not currently reliable.
They are thus now disabled by default.
is output when a branch is NOT activated. Fixes bug #7698.
At the moment, inversion is controlled through the branch settings
dialog. There is no provision for inserting inverted insets directly,
or for changing them from the context menu. Both of these could be
done, of course. The latter would need LFUN_BRANCH_TOGGLE_INVERTED.
With both Qt4 and Qt5, when using a click-to-focus policy, the first
attempt to paste a selection by middle mouse in an external application
which has no focus may fail. It is not clear why this succeeds for some
applications and fails for others, but refreshing the timestamp of the
selection request cures the issue. The cmake part is by Kornel.
See also this thread:
http://thread.gmane.org/gmane.editors.lyx.devel/162491
MSVC does not need a special flag to specify the standard. Using --std=c++14
produces a warning, but compilation succeeds, so the old code did mistakenly
choose --std=c++14 for MSVC.
Older gcc versions (e.g. the first one which has usable std::regex: gcc 4.9)
require the --std=c++11 flag to be set. Otherwise std::regex is not made
available. Therefore we need to keep the flag in the loop.
These files were aded with windows line ends before we did set the text=auto
attribute for all files in .gitattributes, and this caused phantom changes on
linux workspaces after .gitattributes was introduced.
Now these files appear with linux line ends on linux workspaces and with
windows line ends on windows workspaces, like all source files.
The external date inset was implemented as a demonstrator for external insets
in general. It was never intended for production code. Now that we have several
external insets defined we do not need the demonstrator anymore. This fixes
bugs #4398 and #9948.
This was dead code that did never work, and most of it was boilerplate that
you can steel in 15 minutes from any existing math inset. Apart from that it
did contain a pointer to InsetXYMatrix which would create the same problems
we saw with the macros.
XeTeX with TeX fonts is only safe with ASCII input encoding (see #9740)
and we therefore force "ascii" when exporting with XeTeX and 8-bit TeX-fonts.
However, "utf8-plain" is a "power-user" option, which allows to switch off LyX's
encoding of the LaTeX file:
keep this also for "XeTeX with TeX fonts".
The user is responsible to ensure all characters can be processed and are
correctly shown in the output. The provided test sample shows the problems
with this encoding without special measures (like loading fontspec in the
user-preamble or a document class).
Boost.Signals is deprecated. This fixes bug #9943.
The only thing left to do is to rewrite (or get rid of) the boost -mt test
in config/lyxinclude.m4 not to use signals anymore.
As discussed on the list. If no C++11 compiler is found configuration stops
with an error. There are now unneeded parts of boost, the will be removed in
a second commit.
For a suffixed version (with suffix 2.3) and installation dir (/usr/local)
the new paths are:
binary -> /usr/local/bin
system-lib -> /usr/local/share/lyx2.3
fonts -> /usr/local/fonts/truetype/lyx2.3
manuals -> /usr/local/man/man1
locales -> /usr/local/share/locale
tex -> /usr/local/texmf/tex/latex/lyx2.3
The essential hints came from Guillaume amd Jean-Marc at bug #8883.
Tested by comparing the output of
python generate_symbols_list.py `kpsewhich fontmath.ltx`
with lib/symbols.
Also read files with universal line endings and write files using native line
endings, so the script can also be used on windows without changing the line
endings.
The new functions parBottomSpaging and parTopSapcing return below/above each paragraph.
This allows to remove the TopBottomSpace argument and makes the code a
bit clearer.
Now that Row has a pit() member, it is possible to use it instead of passing an extra pit_type parameter to a function which already has access to a Row.
Change the various paint* helpers to take a single row element as argument.
Do not update x_ in the various paint* helpers. Constify them. Update x_ in paintText and paintOnlyInsets instead.
Remove an empty call to paintForeignMark in paintInset (the call did nothing since orig_x == x_ at this point).
It is actually easier to set the 20 pixels margin in redoParagraph, since it is not necessary to take newlines in account when deciding what is the real last row of the paragraph.
Moreover this solves the following bug (present in 2.1.x too): when the document ends with a newling, the bottom margin disappears.
Update PAINTING_ANALYSIS with new tasks.
* remove optional arguments to the helpers that use a FontInfo
* add a textwidth argument to the text() methods that are used by rowpainter.
Now textwidth is only computed if a null value was passed to the
text() method. This means that in the use case of rowpainter, no
textwidth needs to be computed.
On mingw-w64, long long (64bit wide) is larger than long (32bit wide).
Therefore we need some more specializations for string, docstring,
otextstream and << overloaded ostream functions. The configuration code
is by me, the source code changes by Shankar Giri Venkita Giri (bug 10053).
Lyx files converted from 2.1 to 2.2 contain parbeak and latexpar separators that
would not appear if the lyx file was written in 2.2 from scratch. The script
removes latexpar separators and transforms parbreak separators into plain
separators. Then it displays a diff of the resulting pdf files (requires
diffpdf) for manual control. All lyx files shipped with lyx should be updated in
this way. See #10068.
example usage:
cd lib/doc
../development/tools/separator-convert.sh Math.lyx
This is what the polib version does already. If a translation is marked
fuzzy then it is not used, so if the other file contains a non-fuzzy
translation we do not throw away useful information if we overtake it.
If the -o option is given, we may overwrite existing translations with
translations from the other .po file. In this case, we have to delete or set
the fuzzy flag accoring to the updated translation.
This is the same as the parbreak separator and is represented on screen
as the old parbreak. Old parbreak separators are converted to latexpar
separators when they are used for introducing blank lines in the
latex output rather than for separating environments.
Instead, parbreak separators are now represented on screen by a
double line. In essence, latexpar and parbreak separators produce
the same output but are represented differently on screen.
The context menu does not account for latexpar separators and only
"true" separators can be turned each into the other one.
The term LongTable has been deprecated and moreover the renaming makes the interface easier to the eye.
File format updated to 507. (conversion based on jamatos patch)
Layout format updated to 60.
tex2ylx tests updated.
Document EmbeddedObjects.lyx has been updated.
In collaboration with Günter Milde:
1.) Allow char ':' be part of a ctest-label
2.) Eliminate redundant label naming and directory names
(The testnames should not repeat the directory name)
When updating to the latest TeX Live revision, these exports now
succeed.
Inspecting the differences between the "good" PDF and the "bad" PDF
(where the test failed) there are three differences, which can be
found on the printed page numbers 81 and 82 (PDF page numbers 91 and
92). The accented i in "lím" was printed incorrectly (and the
missing glyph was correctly detected). After the update the
character is printed correctly and there is no longer an error.
The package that caused the change is likely babel or babel-spanish.
You can see the log from the TeX Live update that caused the fix by
seeing the attachment to the message here:
https://www.mail-archive.com/search?l=mid&q=20160313015902.lny3g5aujh4c4aps%40scott-Za1510
It could happen that the variable was set in creating a previous test-case.
Some combinations in the controlling files (suspiciousTests, unrelibleTests, ...)
did not set this variable.
Nothing changes for already cached values.
With fresh build-dir and in 'AUTO'-mode we try to determine if the c++ compiler
is able to use this feature.
- fixed typos and updated translation
- support for Krita
- updated support for Gimp
- updated backup detection for TeXLive (generic detection always works independently)
- safeguard for a variable issue
* Increase LyX format
* New function convert_info_insets in lyx2lyx_tools.py
Use this function in the future for future updates of info insets
* Convert "inset-modify tabular" to "tabular-feature" in info insets
* Remove icon naming hack regarding "inset-modify tabular"
- build4-2010.bat: MSVC 2010 and Qt 4.8.7 (as backup)
- build5-2010.bat: MSVC 2010 and Qt 5.5.1
I tested both scripts thoroughly and the resulting LyX build is stable. Please feel free to modify them if something can be improved.
Increment LyX format to 504.
With this new parameter, the user can indicate that some other parameters that
are frequently switched must not be recorded in the file (as if they were a
setting specific to the user or transient, rather than a document setting). This
will play nicer with version control systems.
See the discussion, e.g.:
http://thread.gmane.org/gmane.editors.lyx.devel/157824/focus=157993 (third
solution mentioned)
TODO:
* The interface remains to be set up. We cannot change this setting from LyX
for now.
* If save_transient_properties is false, we should read the user setting as a
per-user-per-document (session) setting (e.g. like the cursor position).
* Once the above is done, we can treat \justification the same way (but it would
be even better if \justification was moved to lyxrc).
* sort and comment remaining unsorted filter patterns in suspiciousTests
(mostly just move to TODO and state what needs to be done).
* comment the patterns for achemso and Math,
(LuTeX incompatibility fixed in TeXLive 2016-01-07).
Simplify the logic for language package selection and make it more consistent:
Use polyglossia with non-TeX fonts (system fonts/Unicode fonts) for all
export flavours (XeTeX, LuaTeX, DVI-LuaTeX), if the language package setting
is "auto" and there is no language not supported by Babel and no package
providing Babel.
This solves some Babel-related autotest cases and leads to some new failures
due to the polyglossia language nesting problem.
* missing characters in linguistics example with system fonts
* language nesting problem in fr/linguistics example
* 110f505b63 solved one failure (Basque example file)
Works with system-fonts due to font substitution in the test-script.
TODO: set system fonts that work in the lyx source(s) to allow compilation
"by hand".
testcases_speed_lyx21 added to suspiciousTests
Handling unknown body token: `\begin_manifest'at line ...
Literate_lyx16 and noweb2lyx_lyx16 added to ignoredTests
Plenty of warnings (~ 390)
New sublabels LyXBug, ERT.
Renamed sublabel TeXLimit to TeXissue.
More sorting and unification of regular expressions.
Removing double entries.
Fixes for some expressions (eu_UserGuide_pdf, examples/ja/(knitr|lilypond|sweave))
Since the stop condition is that the last two consecutive created
files are identical, we do not need to check the last file.
Also checking for load of the created files is not needed, because
exporting the previous file implicitly loads too.
Exporting to some previous lyx format:
Inside the loop
Stop at export with errors/warnings
Stop if exported file not loadable
Stop if exported file identical to previous exported file (OK case)
This is done through creating MD5SUM
We test here, if any \end_{somethig} matches \begin_{something}.
Exeptions are \end_index and \end_branch ATM, they should
match \index and \branch respectively.
Also added new testfile.
Remove patterns matching tests now ignored (CJK/Korean, latex8).
Move patterns matching documents in the attic under new sublabel.
Add more verbose comments.
Comment by Günter Milde:
Actually, *all* Spanish manuals either fail or have wrong output with
Unicode TeX engines and 8-bit fonts. The reason is known: a bug in Babel
that uses utf8 strings whenever Xe- or LuaTeX is detected.
Always-Babel now set in the example document.
Adapted the autotest categorization:
* fails for some developers (why?)
* wrong output with pdflatex/LuaTeX and DVI (missing landscape slides).
he.po in branch contains a number of translations where the translation is
identical with the original text (e.g. for encoding names) which look suspicios
to me. Therefore I did not want to merge these and leave the decision to the
translator. No information is lost, since these "translations" can easily be
recreated from the original texts by copy-paste.
Previously all labels got the depth '7' while processing 'suspiciousTestss'.
The depth is used to sort how our labels are used to build a test-label.
Say a test gets label a, b, and c, with depth 3, 8 and 2.
The constructed test-label will be "b🅰️c"
For new (to be implemented) 'reason-labels' it is more convenient to assign them higher values.
suspiciousTests: Remove Tutorial from the regex
suspendedTests: Explicit list of languages needed
ignoredTests: Language-string is separated from other strings only by '/'. '|', '_', '(' and ')'
This is useful if you know that the translation of a particular language has
not been updated at all in master, but the stable version has been worked on.
Some characters (like ") are escaped in .po files. These are handled correctly
by polib, but the self written parser did not yet take them into account.
We need to remove the #~ prefix of each line, since it is re-added after
wrapping, and because otherwise the comparison with entries from polib
does not work.
Now it is possible to specify the target directory, and the command line syntax
follows the standard rules: It uses options for optional arguments, and one
positional argument for the single required argument.
