We do not currently handle UTF-8 characters in our layout strings.
Replace dashes with simple ASCII dashes to avoid the following
error:
msguniq -o lyx.po
msguniq: input file '-' doesn't contain a header entry with a
charset specification
This commit amends the recent commit b4dcad83.
This was discussed in the thread "Translations of Math environments in LyX
output for LyX 2.2" at http://www.mail-archive.com/lyx-docs@lists.lyx.org/msg08633.html
and has been reviewed. The problem was that in 2.1, the portuguese translation
was correct in lib/layouttranslations but different in po/pt_PT.po. In fact,
the translation is the same for all three languages spanish, portuguese and
brazilian portuguese.
This is the same as the parbreak separator and is represented on screen
as the old parbreak. Old parbreak separators are converted to latexpar
separators when they are used for introducing blank lines in the
latex output rather than for separating environments.
Instead, parbreak separators are now represented on screen by a
double line. In essence, latexpar and parbreak separators produce
the same output but are represented differently on screen.
The context menu does not account for latexpar separators and only
"true" separators can be turned each into the other one.
After some discussion between Georger, Pedro, Pavel and me Georger came to the
conclusion that Mapa is not the correct translation of Chart in this context.
Originally he proposed Gráfico, but since that would be identical to the
translation of Graph we decided that Diagram is better. It is a bit more
general than Gráfico, but it is also used in pt_PT, and the german translation
uses the german equivalent, which is more general as well. Those who need a
Gráfico can still use Graph.
Unfortunately Geoger based the new .po file on the remerged one at
259196e1a6, so we have now the situation that pt_BR is remerged, but the
other languages are not.
These translations were changed implicitly at ad6ab20bb1: Previously, the
translations were taken from pt. At ad6ab20bb1 all pt_BR translations were
copied from pt_BR.po, so we do still need a review for those that differ from
pt_PT.
The term LongTable has been deprecated and moreover the renaming makes the interface easier to the eye.
File format updated to 507. (conversion based on jamatos patch)
Layout format updated to 60.
tex2ylx tests updated.
Document EmbeddedObjects.lyx has been updated.
We now create a backup file when overwriting a file with a new file
format. See #9554 and cc83dfa8. This is now documented in
RELEASE-NOTES.
Thanks to Livu.
These have been forgotten by the last update, since bg, ko and sl are not in
po/LINGUAS. I add them here so that it is obvious that these translations are
missing.
When running the tests with ctest, --rerun-failed can be used to run
the tests that failed on the previous run. However, the same subset
must be specified because it is the test numbers that are used to
index which tests failed on the previous run. For example, it would
be incorrect to do the following:
ctest -R export
ctest --rerun-failed
The following is correct:
ctest -R export
ctest -R export --rerun-failed
* Increase LyX format
* New function convert_info_insets in lyx2lyx_tools.py
Use this function in the future for future updates of info insets
* Convert "inset-modify tabular" to "tabular-feature" in info insets
* Remove icon naming hack regarding "inset-modify tabular"
Unfortunately the footmisc package does not work together with hyperref:
Before 0bf8b8a1, a footnote in a section title was created as a link in pdf
outpout, after 0bf8b8a1 ist was no link anymore. For now we revert to the old
code, and wait until the footmisc and hyperref packages are made compatible.
See my post on the list - enumitem is already described in the userGuide.
(Besides this a makefile entry was missing for the file.)
Please don't add documentation files without a discussion or a review, especially not in a beta phase.
We do now have .sfd sources for all fonts, so either we distribute all of them
with the source package or none. Since the accumulated size is not negligible,
and the are not needed to build LyX, but serve a really special purpose, we
do not add them to the source package for now.
Thanks to Enrico for doing the actual work (my fontforge omits the
TtInstrs...EndTTInstrs blocks for some reason I do not understand).
I did only check that the only difference between the old and new .ttf is the
changed position of the bracketleftbigg glyph. This does finally fix bug 6115.
Generating a ttf from cmex10.sfd would fix bug 6115, but unfortunately I am
unable to export a ttf with the same settings as the existing one, so this has
still to be done.
Since \output_changes is written again at the original position, we need to
fix those files that have been updated using the intermediate version.
The update was done by running development/tools/updatedocs.py <lyxexe> where
<lyxexe> was the path to an up to date LyX binary. All files that did contain
additional changes were reverted:
lib/doc/LFUNs.lyx
lib/doc/UserGuide.lyx
lib/doc/Shortcuts.lyx
lib/examples/de/beamer.lyx
The \SpecialChar changes are fine, these files have never been saved by LyX
after the update to 483.
Increment LyX format to 504.
With this new parameter, the user can indicate that some other parameters that
are frequently switched must not be recorded in the file (as if they were a
setting specific to the user or transient, rather than a document setting). This
will play nicer with version control systems.
See the discussion, e.g.:
http://thread.gmane.org/gmane.editors.lyx.devel/157824/focus=157993 (third
solution mentioned)
TODO:
* The interface remains to be set up. We cannot change this setting from LyX
for now.
* If save_transient_properties is false, we should read the user setting as a
per-user-per-document (session) setting (e.g. like the cursor position).
* Once the above is done, we can treat \justification the same way (but it would
be even better if \justification was moved to lyxrc).
The current behaviour of the \origin parameter replaces relative file names
with the absolute original names if a document has been moved even if the
files have been moved as well. This behaviour is annoying e.g. for editing the
LyX docs in a git checkout.
Now file names are only replaced if the referenced file sdo not exist.
The lib/unicodesymbols part is based on work by Günter Milde:
Both, \r{A} and \AA (rsp. \r{a} and \aa) are equivalent standard LICR macros
for Aring/aring as well as the deprecated "angstrom sign" character (212B).
However, with \AA for 212B and \r{A} for 00C5, tex2lyx converts \AA to the
deprecated "angstrom sign" which is missing in many fonts including the
Unicode version of Latin Modern.
I added the normalize_c() calls so that tex2lyx prefers the precomposed forms
(these are better editable in LyX) and the deprecated flag.
* missing characters in linguistics example with system fonts
* language nesting problem in fr/linguistics example
* 110f505b63 solved one failure (Basque example file)
This does not change output, only GUI.
paper: make sure that the starred sections use proper sans serif on screen.
foils: add relevant categories to layouts
The default behaviour of git for text files is to store unix line endings in
the repository, and to convert to native line endings in the local workspace.
This plays well with the LyX behaviour of storing files in native line endings.
Unfortunately it may break if files are sent around by email and submitted on
a different OS than the one they were last saved, and this did probably happen
in 6b0632eea.
These were using lyx2latex, assuming the result can be used in verbatim
insets as is, which is not the case (mostly due to \\backslash).
A new lyx2verbatim function is now used instead. Also, ERT insets are
dissolved in the gloss reversion process.
Preliminary work for addressing #7790. Thanks to Richard for providing initial
files this is based on.
Adding to TextClass:
OutlinerName <string> <string>
(the second string is translated)
e.g.:
OutlinerName thm "Definitions & Theorems"
Adding to Layout:
AddToToc <string> (default "", means no)
IsTocCaption <bool> (default 0)
e.g.:
AddToToc thm
IsTocCaption 1
Adding to InsetLayout:
AddToToc <string> (default "", means no)
IsTocCaption <bool> (default 0)
e.g.:
AddToToc literate
Adding to inset arguments:
IsTocCaption <bool> (default 0)
Pdflatex is the recommended export tool for the manuals.
Pdflatex brings the best results for hyperlinking.
Some features (e.g. rotated text) are not available in DVI or PS (dvips).
This does not affect export from command line or autotests
(where this setting is ignored and the format must aways be given explicitely).
After removing "unneded" PNG files from the repo, this manual failed.
Skaling is done to ensure that the icons are approximately one M high.
Also, the default output is set to PDF (pdflatex) as this is said to be the export
format our manuals are designed for.
Always-Babel now set in the example document.
Adapted the autotest categorization:
* fails for some developers (why?)
* wrong output with pdflatex/LuaTeX and DVI (missing landscape slides).
We do not update the local layout of our .lyx files because users
would then not be able to export to older formats. For example, if a
2.2.0 user exported a template to 2.1.x format and tried to open the
file in LyX 2.1.x, there would be an error because the file would
contain a local layout whose format is too new. The root reason for
this is that we do not convert layouts to older layout formats.
Otherwise it could easily happen that the order is changed, since rsvg_convert
seems to be more picky about invalid files (see http://www.lyx.org/trac/ticket/9891)
exist. This will allow for a proper fix for bug #8796, though that may or may
not get fixed before 2.2.0.
Also, change the InStyle tag to ModifyStyle, per a suggestion of Jurgen's.
patch. Also fix some escaping problems (\end instead of \\end).
My testing revealed some other problems with this routine: stray
\noindent tags popping up here and there. I don't have time to fix
it right now but will try to come back to it.
Some templates had the inputenc setting "default" (meaning
use the language default encoding, (not TeX's default which is 7-bit ASCII) but
don't load inputenc, leave handling of non-ASCII characters to the author).
This is no apparent problem as long as no non-ASCII character is used in the
document. It is very unsave, however, as any non-ASCII character used in the
document has the potential to either make compilation fail or be
misrepresented in the output.
No single translation has been changed, but pt_BR and pt_PT are now correctly
sorted. This removes the artifical diffs that running
make ../lib/layouttranslations
did produce previously.
Also MacOSX ReadMe files. Note that a few lib/doc files are
also "updated" because trailing spaces are removed, but their file
formats are the same because they were recently updated at 83672113.
I did "git checkout LFUNs.lyx" because this file is generated
automatically and has a special header.
Prevent loading of lmodern.sty if non-TeX fonts are set and
Define DejaVu as non-TeX font.
This ensures that non-TeX fonts are used if requested (lmodern.sty set
the 8-bit version of LatinModern if compiling with LuaTeX).
Also ensure that a font with all characters is used. (LatinModern misses small
Greek characters.)
Similar actions for other manuals and examples with Greek or Cyrillic script
will solve some more export tests with non-TeX fonts.
These were fixed manually. I tried to add an option to updatedocs.py to
open and save a file with LyX, but that did not work, since
lyx -x 'command-sequence buffer-write ; lyx-quit' does not write and does
not quit.
gen_lfuns.py does now produce the current file format, and and LFUNs.lyx was
re-created with the updated script.
There is one difference if you compare this version of LFUNs.lyx with the old
version updated by lyx2lyx: All occurences of LyX, TeX etc. in the lfun
descriptions are no longer output as logos. I do consider this as a feature,
since the old version did also output the TeX part of BibTeX as a logo, as well
as places where the names were part of some syntax, e.g. lyx::LyXRC::LyXRCTags.
lyx2lyx did not yet know about /systemlyxdir/ and set \origin to the path
where my git tree lives instead. This path is not usable except on my machine,
so better write something more usable instead.
This is a special command line switch of lyx2lyx, so it does not interfere
with normal usage. I did not try to deduce the systemlyxdir from lyx2lyx to
be on the safe side.
This is one part of bug 9744: If you toggle between TeX fonts and non-TeX
fonts, the settings of the other choice are no longer thrown away, but stored
and re-activated if you switch back. Most parts of the patch are purely
mechanical (duplicating some BufferParams members), the only non-mechanical
change is in the GUI logic.
then just perform a null conversion. This seems better than aborting
with an error. I can imagine a script that converted all files in a
certain directory to format 498, and you don't want it to be an error
if one of them is already 498.
Prior to this, what lyx2lyx would do is convert to the lowest format
in the current version. So, e.g., asked to convert 498 to 498 it would
convert to 474. That is obviously wrong.
Each way might be preferred by a different developer and the more
ways that can be described of running the tests, the higher the
chance is that developers will find a way that works well for them.
Explain why the export tests are enabled for formats that are not
expected to work well with certain document classes, modules, or
packages. The reason is that if a .lyx file goes from compiling
successfully for one format (even if that format is not officially
supported for the combination of features used), if that document
suddenly fails to compile, there is a significant chance that a bug
was introduced in LyX. In other words, there is a high signal/noise
ratio. If it is determined that a test is failing because an
expected incompatibility is exposed, then the test can be inverted.
People working on the documentation do probably want to switch this on. It
gives easy access to LyX and LaTeX logos (bug 9626), and the info and menu
separator insets.
The export tests, check_load tests, and URL tests are now documented
in the Development.lyx file. The export tests are described in
detail, such as how to run them and how to interpret the results.
These icons are for lfuns that are not very interesting for users, but quite
often used when working on the LyX documentation. Now we can create a special
LyX documentation toolbar.
Many of our documents have babel-specific preamble code. By putting
this code in a \@ifpackageloaded{babel}{}{} conditional, XeTeX and
LuaTeX compilation with polyglossia now works. This fixes some
LuaTeX tests that were broken by edd37de8 and also allows us to
uninvert some XeTeX tests.
Note that in some of the files although the preambles were fixed to
allow for polyglossia, they still do not compile without errors:
es/Math.lyx
es/Customization.lyx
de/Customization.lyx
Similar fixes might be desired in other manuals but these at least
fix regressions in the tests.
PolyglossiaOpts are case-sensitive so "latin" must be changed to
"Latin". Without this change, compiling examples/sr/Braille.lyx
with LuaTeX and system fonts gives the following error:
Package Polyglossia Error: Unknown script `latin' for Serbian
language
Many of our Spanish documents use babel-specific features in the
documents, e.g. to write "sin" in Spanish ("sen"). Because babel
seems to have good support for Spanish, I am setting the "Always
babel" for the manuals.
This fixes several LuaTeX tests with non-TeX fonts. A XeTeX test is
also reverted accordingly.
Some of my following commits will make changes to these files
(mainly just changing the preambles). This commit simply updates the
format so the diffs of the following commits are easy to read.
Since a while now we can translate the unit descriptions. For some special applications it is also necessary that the users know the LaTeX command of the relative units.
- also fix a typo in Customization.lyx
- also disable PDF-reply since this never works correctly and it could even destroy the whole PDF and exceeds the TeX capacity
- update the french version accordingly
paralist.sty extends the standard list environments by some more compact
versions. Support for this has already been requested 15 years ago, and
now I needed it myself.
* Omit commented-out lines
* Properly escape backslash
* Do not allow non-space chars after delaration
* Allow blanks before # comment character
Fixes: #9746
Greek and Times under MikTeX with auto-install may fail due to a half-installed
font package. However, the workaround in LyX stands in the way of
alternative approaches (see bug #6469).
`os.popen` is deprecated since Python-2.6. Also, this fixes the handling
of files with quotes in their names. The patch requires Python >= 2.7.
Furthermore, the patch executes the lyx2lyx script with the same
interpreter used for it, to maintain compatibility.
I also removed some lines related to Python-2.4, as it is no longer
supported anyway.
Actually photos (i.e. .jpg files) where supported previously, but for pdflatex
output an unneeded conversion to png was done. The RasterImage templates
behaves now exactly as InsetGraphics for these files: If the input format is
jpg, use that for pdflatex, else convert to png.
This is another advantage of the new logo insets: We see in LyX where they are
inserted for the output. In these two cases, the text describes keywords of
the external template configuration file language, so these should not be
typeset as logos.
The difference to bitmap graphics is that these will be included as PDF for
pdflatex, so the vector properties are retained if a suitable conversion path
exists.
This brings the external inset on par with the graphics insets as far as the
clipping option is concerned. The graphicxs package supports both: A bounding
box without units (which means that bp ia assumed), and a bounding box with
units, so we can simply output the values including the units.
Being able to compile document with zipped .eps files was a useful feature of
the graphicxs package 20 years ago, but the LyX support is no longer relevant:
- The flag is ignored if preview is on
- If pdflatex is used then uncompressing happens during the compilation anyway
- If set, the flag prevents LyX from issuing proper error messages if
something with the image is wrong
- For hard disk capacities from 20 years ago not uncompressing is a useful
feature, but for current hard disk capacities it does not matter
- The external inset does not have it, and if we want to merge both insets
one day we would need to implement it there, which is even more difficult
than in InsetGraphics
Now the minibuffer toolbar is "auto" by default. It is opened by
command-execute (M-x) and closed when the command is executed without error.
* make lyx::dispatch return a DispatchResult struct
* there is a new MINIBUFFER type of toolbar, that can be used for this use.
* remove special handling of M-x in minnibuffer; Escape can be used instead. Fix focus in this case.
* when minibuffer toolbar is "auto", make the toolbar close itself after
- a command has been executed without error
- an empty command has been executed
- the Escape key has been used
[this is actually commit fdcff02a, which was later reverted at dd61d8cf]
LaTeXFeatures defines \textcommabelow and \textcommaabove based on a
generic \LyXTextAccent and declares TextCompositeCommands for the Baltic
letters in the T1 font encoding, using \textcommaabove for the small letter g
and \textcommabelow else.
This allows overwriting of the composite definition for other font encodings.
Especially, it does not interfere with the polish/baltic font encoding L7x
(supported by LatinModern and TeXGyre fonts) that provides pre-composed
glyphs.
Greek characters with perispomeni (tilde) accent were not properly shown
in the output document, because the "textgreek" feature re-defined \~ in
a way incompatible with lgrenc.def since version 0.8 (2013-05-13)
(package greek-fontenc).
The compatibility-definition is required for older versions of the font setup
(before the move of "lgrenc.def" from "babel" to "greek-fontenc").
It is now done with "ProvideTextCommand" to not overwrite the more complete
implementation in lgrenc.def.
With the compatibility definition, combined diacritics with tilde
must be input with the tilde first (e.g. \~>, not \>~).
"unicodesymbols" is changed accordingly.
Also, some LICRs for combining Greek diacritical characters were added to
Unicodesymbols.
Add font encodings auto-set by babel.
Set font encoding for georgian to the babel default.
Remove InternalEncoding from languages that use a font encoding
compatible to T1.
Change (LaTeX input) encoding for Serbian (cyrillic) and Romanian.
See #9652 for details.
This fixes bug #9615.
The "notermination" flag tells LyX, that terminating an LICR macro with {} is
not necessary. This is normally the case for all macros with non-alphabetical
name (e.g. \{).
However, combining diacritical characters are converted to *accent macros*,
which expect an argument (the base character).
In Unicode, the base character precedes the combining character,
in LaTeX the combining character precedes the base character.
LyX changes the order of the two characters to get this right,
e.g. "x" + "combining tilde" becomes "\~{x}".
In the special case there is no preceding character (e.g. at the start of the
document or a paragraph), Unicode shows the combining diacritical character
without base character.
The replacement is currently not "terminated" (e.g. "\~"), because of the
"notermination=text" flags in "unicodesymbols".
The accent macros take the *following* character as base character, which is
clearly not intended.
In case of a paragraph consisting of just one combining diacritical character,
LaTeX compilation fails with an error.
With the patch, LyX writes the accent macros with an empty argument,
e.g. "\~{}", the output is similar to the view in the GUI with the diacritical
character on its own, not on the follwoing character.
* Take into account the filesystem encoding for the zip export on *nix
such that the representation of filenames in the zip archive is not
mangled, when possible. This only concerns the way filenames are displayed
as their creation in the filesystem was nevertheless correct.
* On Windows, try to obtain the command line parameters from the wide char
representation by directly accessing the platform APIs through ctypes.
This allows to also deal with filenames not exactly representable using
the current code page and corrects a bug resulting in silently dropping
those kind of filenames.
Now the minibuffer toolbar is "auto" by default. It is opened by
command-execute (M-x) and closed when the command is executed without error.
* make lyx::dispatch return a DispatchResult struct
* there is a new MINIBUFFER type of toolbar, that can be used for this use.
* remove special handling of M-x in minnibuffer; Escape can be used instead. Fix focus in this case.
* when minibuffer toolbar is "auto", make the toolbar close itself after
- a command has been executed without error
- an empty command has been executed
- the Escape key has been used
Instead of redefining \usepackage for avoiding the microtype package
when generating previews in dvi mode, the draft option can be used
for disabling it. This also allows to somewhat simplify the
fix_latex_file function.
These were added when the user guide was converted to latest format.
Their purpose is assuring that the vertical spacing is not changed for
old documents. Given that they also assure that the bad spacings in
nested item environments is preserved, let's simply get rid of them.
The path argument of checkProg* was added to the PATH list in a nested
loop such that the list doubles in size each time the loop is executed,
thus also slowing down detection of missing programs.
The strategy adopted in bc47054b had some drawbacks related to the way
instant preview snippets are generated. See the subthread starting at
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg187916.html
for details.
The strategy adopted in this commit is that of adding macro definitions
only for the macros actually used in a preview snippet, independently
of whether some macro was already used in a previous snippet. In this way
the snippets don't need to be changed according to whether they are
compiled as a whole or separately from each other. This fact was causing
the regeneration of a preview snippet whenever the cursor entered the
corresponding inset, even if the generated image would have not changed.
The problem of defining or redefining a macro is taken care by the
python scripts.
The escaping of symbols read from unicodesymbols was inconsistent, which lead
to wrong replacements (bug 9559). Now the escaping is consistent: unicode_reps
contains unescaped LaTeX commands, the needed escaping for LyX files is
applied in put_cmd_in_ert() and lyx2latex().
This is bug #9612. The patch is from Günter Milde. He wrote:
The patch uses the "long" macro names (\llless and \gggtr) to minimize
name-clash probability. (There is, e.g., a name clash of \lll with Babel's
polish.ldf (cf. bug #6197))
This is for people who cannot grasp the superior conventions of emacs ;)
A new argument "partial" has been added to word-upcase, word-lowcase
and word-capitalize that restores the old emacs-like behavior.
The (x)emacs bindings are updated to use the "partial" argument, and
also to bind correctly M-u and M-l (M-c is unfortunately not
available).
Fixes bug #2826.
* Provide for vector fonts only if needed.
* Make sure microtype doesn't throw a trantum in dvi mode.
* Use correct macro definition in preview insets.
In June the R-SS phrase system is replaced officially by the GHS H-P statement system in the EU.
So just in time here is support for this.
No new LaTeX package is required since the already supported package mhchem provides the statements.
The documents saved to the system directory have now the origin tag
prefix "/systemlyxdir/". This allows both saving them always using
the same virtual path irrespective of the real path and to let the
origin tag work out of the box also on MacOS.
Since lyX 2.0 we support to use the in_preamble tag. This allows to support more commands. For an unknown reason I forgot the jss.layout when I updated the other layouts once.
Fileformat change
according to the powerdot manual it uses the standard floats and indeed, the float deinitions were identic to the ones in stdfloats.inc
- powerdot-example.lyx: add a slide with floats (floats are only possible with the H placement option. (assuring this will be possible with the fix for bug#7752)
This reverts commit bede4d320b.
As JMarc notes [1], if we replaced show with toggle, we would lose some
functionality:
There is one use that is not possible with this change (as I argued
before), which is a fully keyboard-based navigation.
With LyX 2.1, I can do C-M-o and navigate with cursor in the
outline. I can do the same with advanced S&R. IN this sense,
toggling is a step back IMO.
The plan now is to find another way to close the dialog (without
using toggle), such as having ESC close it or another key bind.
Ticket #8388 will stay closed because 'show' and 'toggle' are too
close for the cost of having two separate bindings.
[1] http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg187693.html
Add a new tag HasGuiSupport to language file. Add it for all l10ns
that we currently ship. The po files that are unused are not currently
tagged as available, but this could be done, since the code later
checks that the translation is actually there.
This new information is used in GuiPrefs when populating the language
combox.
The new scheme implies that adding a new language is now a two-step
process:
* the language code has to be added to po/LINGUAS, as before;
* one of the entries of the lib/language file has to be selected as
reference and be given the "HasGuiSupport true" property.
Since Kornel's commit at e2d41970, it is now possible to update the
tex2lyx tests with CMake. Note that this is a case where a make
target in the build directory can affect the source directory, which
might not be advisable.
Old LyX version can cope with degenerated multicolumn cells spanning only one
column, so these should not cause a conversion of the whole formula to ERT.
Such columns are used to set border lines or alignment for single cells.
The math parser could not handle multicolumn grids. This is a problem because
there is no true ERT in math (everything is parsed).
Now multicolumn cells are parsed correctly. The display is also somewhat OK,
but apart from that any multicolumn related UI is missing. Since the file
format change is now done the UI can be added at any later point. The most
important part of bug 396 is now fixed: tex2lyx does not create invalid .lyx
files anymore for formulas containing \multicolumn.
I updated the tex2lyx test cases that produce correct output. tex2lyx does
still produce invalid output for the test cases which are not updated because
of the previous format change.
I don't understand why the string "shadowsize" is not already in the file because when I convert from format 474 to 489 it is added. So why is it not there when I convert from format 474 to 491.
We also get a consistent look with amsmath, so require esint or amsmath.
When resolving alternatives, do also take into account whether the package
is available. For this to work, we also need to test for amsmath.sty (which
was surprisingly not yet done).
The "save-as" part of the bug is fixed by extending the \textclass tag
such that, if a local layout file is used, its path relative to the
document directory is now stored together with the name. If a relative
path cannot be used, an absolute one is used but, in this case, the
document is not usable on a different platform.
The "copy" part is fixed by introducing a new \origin tag, which is
written when the file is saved. This tag stores the absolute path of
the document directory. If the document is manually copied to a
different location, the local layout file is retrivied by using
\origin (which is only updated on save).
This new tag may prove useful also for locating other files when the
document is manually moved to a different directory.
As in the original implementation the files needed for the layout
(for example, a latex class) had to be in the same directory as the
layout file, this directory has also to be added to TEXINPUTS.
Avoid that \newcommand[x] definitions of math macros are pushed multiple
times to the preview loader.
Redefinitions (via \renewcommand[x]) are properly handled.
If use of hyperref is detected, the postscript route is not attempted
(because we know it will fail) and the PDF route is directly chosen.
Also account for all upper case extensions for pdflatex image files.
Was forgetting this last bit from 64e0c558. Also give a message such
that the user is informed that not everything is lost if latex fails.
With this, the previews are generated also when the document directly
specifies a specific pdf output format.
This is a followup commit to 691fdea3 and restores the behavior of the
script as it was intended before 64e0c558, other than taking into account
possible inclusion of files that only pdflatex can process and the
possibility of multiple defined math macros.
The instant previews in the math manual now work again.
- enrich the examples
- add info about naming
- formatting fixes to improve the layout of the PDF
- make the document compilable also if the package insdljs is not installed
If pdftocairo is detected, it is used for generating bitmaps in the
legacy method route in preference to ghostscript. This is justified
by the fact that the conversion is 4 to 5 times faster and the
quality of the generated images is superior.
When the dvipng route is selected and latex fails, the lyxpreview2bitmap.py
script simply bails out. The failure may be due to using a specific pdf
only feature in ERT (for example, the inclusion of a pdf image).
In this case the procedure may succeed simply trying to use pdflatex
and the legacy conversion method.
The \lightning symbol is text mode only. Hence, for using it in
mathed, it must be inserted in a text mode environment such as
\mbox, \text, etc. However, as it is not marked as textmode,
LyX "helpfully" encloses it in \ensuremath everytime one tries
to put it in a text mode environment, thus defying the countermeasure.
By declaring it textmode only, LyX stops doing that and thus it can be
correctly output by simply selecting it and hitting Ctrl-M.
Control + Shift + PgDn now moves a tab to the right.
Control + Shift + PgUp now moves a tab to the left.
These keybindings are consistent with Chromium, Firefox,
Nautilus, and gnome-terminal.
Note that I allow for wrapping. This is consistent with
allowing wrapping for buffer-{next,previous}, but there
might be reasons to disable it in the future.
This template was only reported as failing to compile by LyX as of
0a6120cb. I do not know how long this template was actually failing
to compile without error. The problem was that the class requires
\doi to be defined. This might not have been a requirement in
previous versions of the class.
Thanks to Enrico for finding the problem and solution.
This is the rersult of a discussion on the list. Now all special characters
have meaningful names, and it is clear that the LyX file syntax is not LaTeX.
When closing a document with the cursor near an icon info inset, LyX
may crash on loading again the same document. This is most probably due
to the fact that compressed svg icons are first uncompressed to a
temporary file before being used. The temporary file is then deleted
but something still expects to find it in place. The exact circumstances
that lead to the crash are unknown, and maybe there is also a race entering
the picture here. However, a document that always leads to a crash can be
found attached here: http://article.gmane.org/gmane.editors.lyx.devel/154566
This commit does not fix the cause of the crash but rather avoids it.
As a bonus, the svg icons used by LyX are not uncompressed anymore before
being used, speeding up startup time. This is not a problem, because Qt
can deal with compressed svg images.
Imagemagick detects the inut file format based on contents. Therefore it does
not make sense that we prefix the to be converted file name with the extension
(assuming that the file extension matches the imagemagick format name). This
breaks formats where the extension used by LyX does not match the imagemagick
format name.
- Restore proportion between icons, such that, for example, \imath
is not confused with a lower case 'l' or \textdegree with \circ
- Use real \mathbb and \mathcal TeX icons
I'll revise also the other sets in the Math Panels toolbar along
these lines. It is important to see whether a symbol has ascendents
or descendents or what is their relative size.
- Use paths, not fonts. Have a look at the sqrt icon in the image attached
here http://thread.gmane.org/gmane.editors.lyx.devel/154179/focus=154183
to see what may happen when a font is not present on a given system.
- Make uniform the height of the parentheses.
- Move a couple of icons to the oxygen subdir (I was not sure it was Ok
replacing them. If yes, they can be simply deleted).
I did not notice that all icons in math/ are shared and in a0895046 I have
overwritten some of them. I am restoring them in the proper subdir.
Two of them, namely font.svgz and frac.svgz, give warnings that should
be addressed. Anyway, I see that these icons use fonts. They are better
substitued with paths (a menu entry in inkscape) because if the fonts
are missing on a system, the icons look different and, in general, they
may look ugly.
You have to manually delete the lib/images/svg directory as git
tracks only files.
There may be warnings on the terminal due to some faulty icons that have
to be found and corrected. Moreover, some of the icons are not rendered
too well at the default size. These ones should be properly tweaked.
Kudos to Jürgen for putting together such a large number of icons.
Most of the changes are related with dictionaries returning views instead of
lists.
xrange -> range (since xrange is gone in python 3)
The code that is special to support both python 2 and 3 is enclosed in a comment
\# Provide support for both python 2 and 3
and
\# End of code to support for both python 2 and 3
And so later it can be removed safely when python 2 is no longer supported.
We have some math macros that exist only because LyX can display them easily,
but which require user preamble code. These commands should not appear in
autocompletion, they are only there to make the formulas of users who actually
need thgese symbols and know what to put into the preamble more beautiful.
The svg files produced by vector editors may end up containing a lot
of unused elements that increase their size without any impact on
quality. For example, this occurs when copy/pasting between images
such that unused effects or shadings simply clutter the files.
Removing these elements in some cases may reduce the size to one half
or one third of the original one, leaving unmodified the image quality.
I also tweaked some existing icons to make them look better at default size.
Moreover, some text was replaced with paths, because the required font may
not exist on a system and font substitution would take place, making the
icons look different on different systems.
Both the hyphen and special phrase conversion did not exclude insets which
reference external files. This was wrong since LyX does not replace
\SpecialCharNoPassThru etc for these insets.
Previously, LyX did replace some words with typeset logos, and there was no
way to prvent this except putting them, in ERT (bug #4752). Now we have
special insets for these words, and standard text is left alone.
Thanks to Scott for testing. Command insets do not use InsetText for the
arguments, so users have to write them in LaTeX syntax (this is bug #4595).
Therefore we must leave hyphens alone in these insets.
